.bash_aliases

#  Customize BASH PS1 prompt to show current GIT repository and branch.
#  by Mike Stewart - http://MediaDoneRight.com

#  SETUP CONSTANTS
#  Bunch-o-predefined colors.  Makes reading code easier than escape sequences.
#  I don't remember where I found this.  o_O

# Reset
Color_Off="\[\033[0m\]"       # Text Reset

# Regular Colors
Black="\[\033[0;30m\]"        # Black
Red="\[\033[0;31m\]"          # Red
Green="\[\033[0;32m\]"        # Green
Yellow="\[\033[0;33m\]"       # Yellow
Blue="\[\033[0;34m\]"         # Blue
Purple="\[\033[0;35m\]"       # Purple
Cyan="\[\033[0;36m\]"         # Cyan
White="\[\033[0;37m\]"        # White

# Bold
BBlack="\[\033[1;30m\]"       # Black
BRed="\[\033[1;31m\]"         # Red
BGreen="\[\033[1;32m\]"       # Green
BYellow="\[\033[1;33m\]"      # Yellow
BBlue="\[\033[1;34m\]"        # Blue
BPurple="\[\033[1;35m\]"      # Purple
BCyan="\[\033[1;36m\]"        # Cyan
BWhite="\[\033[1;37m\]"       # White

# Underline
UBlack="\[\033[4;30m\]"       # Black
URed="\[\033[4;31m\]"         # Red
UGreen="\[\033[4;32m\]"       # Green
UYellow="\[\033[4;33m\]"      # Yellow
UBlue="\[\033[4;34m\]"        # Blue
UPurple="\[\033[4;35m\]"      # Purple
UCyan="\[\033[4;36m\]"        # Cyan
UWhite="\[\033[4;37m\]"       # White

# Background
On_Black="\[\033[40m\]"       # Black
On_Red="\[\033[41m\]"         # Red
On_Green="\[\033[42m\]"       # Green
On_Yellow="\[\033[43m\]"      # Yellow
On_Blue="\[\033[44m\]"        # Blue
On_Purple="\[\033[45m\]"      # Purple
On_Cyan="\[\033[46m\]"        # Cyan
On_White="\[\033[47m\]"       # White

# High Intensty
IBlack="\[\033[0;90m\]"       # Black
IRed="\[\033[0;91m\]"         # Red
IGreen="\[\033[0;92m\]"       # Green
IYellow="\[\033[0;93m\]"      # Yellow
IBlue="\[\033[0;94m\]"        # Blue
IPurple="\[\033[0;95m\]"      # Purple
ICyan="\[\033[0;96m\]"        # Cyan
IWhite="\[\033[0;97m\]"       # White

# Bold High Intensty
BIBlack="\[\033[1;90m\]"      # Black
BIRed="\[\033[1;91m\]"        # Red
BIGreen="\[\033[1;92m\]"      # Green
BIYellow="\[\033[1;93m\]"     # Yellow
BIBlue="\[\033[1;94m\]"       # Blue
BIPurple="\[\033[1;95m\]"     # Purple
BICyan="\[\033[1;96m\]"       # Cyan
BIWhite="\[\033[1;97m\]"      # White

# High Intensty backgrounds
On_IBlack="\[\033[0;100m\]"   # Black
On_IRed="\[\033[0;101m\]"     # Red
On_IGreen="\[\033[0;102m\]"   # Green
On_IYellow="\[\033[0;103m\]"  # Yellow
On_IBlue="\[\033[0;104m\]"    # Blue
On_IPurple="\[\033[10;95m\]"  # Purple
On_ICyan="\[\033[0;106m\]"    # Cyan
On_IWhite="\[\033[0;107m\]"   # White

# Various variables you might want for your PS1 prompt instead
Time12h="\T"
Time12a="\@"
Time24h="\A\[$(tput sgr0)\]"
PathShort="\w"
PathFull="\W"
NewLine="\n"
Jobs="\j"

# This PS1 snippet was adopted from code for MAC/BSD I saw from: http://allancraig.net/index.php?option=com_content&view=article&id=108:ps1-export-command-for-git&catid=45:general&Itemid=96
# I tweaked it to work on UBUNTU 11.04 & 11.10 plus made it mo' better

export PS1=$IBlack$Time24h$Color_Off'$(git branch &>/dev/null;\
if [ $? -eq 0 ]; then \
  echo "$(echo " "`node -v`)$(echo `git status` | grep "nothing to commit" > /dev/null 2>&1; \
  if [ "$?" -eq "0" ]; then \
    # @4 - Clean repository - nothing to commit
    echo "'$Green'"$(__git_ps1 " (%s)"); \
  else \
    # @5 - Changes to working tree
    echo "'$IRed'"$(__git_ps1 " {%s}"); \
  fi) '$BYellow$PathShort$Color_Off'\$ "; \
else \
  # @2 - Prompt when not in GIT repo
  echo " '$Yellow$PathShort$Color_Off'\$ "; \
fi)'

.bashrc

# ~/.bashrc: executed by bash(1) for non-login shells.
# see /usr/share/doc/bash/examples/startup-files (in the package bash-doc)
# for examples

# If not running interactively, don't do anything
case $- in
    *i*) ;;
      *) return;;
esac

# don't put duplicate lines or lines starting with space in the history.
# See bash(1) for more options
HISTCONTROL=ignoreboth

# append to the history file, don't overwrite it
shopt -s histappend

# for setting history length see HISTSIZE and HISTFILESIZE in bash(1)
HISTSIZE=1000
HISTFILESIZE=2000

# check the window size after each command and, if necessary,
# update the values of LINES and COLUMNS.
shopt -s checkwinsize

# If set, the pattern "**" used in a pathname expansion context will
# match all files and zero or more directories and subdirectories.
#shopt -s globstar

# make less more friendly for non-text input files, see lesspipe(1)
[ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)"

# set variable identifying the chroot you work in (used in the prompt below)
if [ -z "${debian_chroot:-}" ] && [ -r /etc/debian_chroot ]; then
    debian_chroot=$(cat /etc/debian_chroot)
fi

# set a fancy prompt (non-color, unless we know we "want" color)
case "$TERM" in
    xterm-color|*-256color) color_prompt=yes;;
esac

# uncomment for a colored prompt, if the terminal has the capability; turned
# off by default to not distract the user: the focus in a terminal window
# should be on the output of commands, not on the prompt
#force_color_prompt=yes

if [ -n "$force_color_prompt" ]; then
    if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then
	# We have color support; assume it's compliant with Ecma-48
	# (ISO/IEC-6429). (Lack of such support is extremely rare, and such
	# a case would tend to support setf rather than setaf.)
	color_prompt=yes
    else
	color_prompt=
    fi
fi

if [ "$color_prompt" = yes ]; then
    PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ '
else
    PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ '
fi
unset color_prompt force_color_prompt

# If this is an xterm set the title to user@host:dir
case "$TERM" in
xterm*|rxvt*)
    PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1"
    ;;
*)
    ;;
esac

# enable color support of ls and also add handy aliases
if [ -x /usr/bin/dircolors ]; then
    test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)"
    alias ls='ls --color=auto'
    #alias dir='dir --color=auto'
    #alias vdir='vdir --color=auto'

    alias grep='grep --color=auto'
    alias fgrep='fgrep --color=auto'
    alias egrep='egrep --color=auto'
fi

# colored GCC warnings and errors
#export GCC_COLORS='error=01;31:warning=01;35:note=01;36:caret=01;32:locus=01:quote=01'

# some more ls aliases
alias ll='ls -alF'
alias la='ls -A'
alias l='ls -CF'

# Add an "alert" alias for long running commands.  Use like so:
#   sleep 10; alert
alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"'

# Alias definitions.
# You may want to put all your additions into a separate file like
# ~/.bash_aliases, instead of adding them here directly.
# See /usr/share/doc/bash-doc/examples in the bash-doc package.

if [ -f ~/.bash_aliases ]; then
    . ~/.bash_aliases
fi

# enable programmable completion features (you don't need to enable
# this, if it's already enabled in /etc/bash.bashrc and /etc/profile
# sources /etc/bash.bashrc).
if ! shopt -oq posix; then
  if [ -f /usr/share/bash-completion/bash_completion ]; then
    . /usr/share/bash-completion/bash_completion
  elif [ -f /etc/bash_completion ]; then
    . /etc/bash_completion
  fi
fi

export NVM_DIR="/home/tom/.nvm"
[ -s "$NVM_DIR/nvm.sh" ] && . "$NVM_DIR/nvm.sh"  # This loads nvm

# dodane 2016/09/30
alias git-flow='git flow'
alias gf='git-flow'
alias gfi='git-flow init'
alias gfid='git-flow init -d'
alias gff='git-flow feature'
alias gffv='git-flow feature -v'
alias gffco='git-flow feature checkout'
alias gffd='git-flow feature diff'
alias gfff='git-flow feature finish'
alias gffp='git-flow feature publish'
alias gffl='git-flow feature pull'
alias gffr='git-flow feature rebase'
alias gffs='git-flow feature start'
alias gfft='git-flow feature track'
alias gfr='git-flow release'
alias gfrv='git-flow release -v'
alias gfrf='git-flow release finish'
alias gfrp='git-flow release publish'
alias gfrs='git-flow release start'
alias gfrt='git-flow release track'
alias gfh='git-flow hotfix'
alias gfhv='git-flow hotfix -v'
alias gfhf='git-flow hotfix finish'
alias gfhp='git-flow hotfix publish'
alias gfhs='git-flow hotfix start'

# dodane 2016/09/30
alias pfr='~/github-flow-publish-for-review.sh'

# added by travis gem
[ -f /home/tom/.travis/travis.sh ] && source /home/tom/.travis/travis.sh

# dodane 2018/05/14
alias killw='kill -9 $(pgrep -f webstorm)'

# dodane 2018/06/07
function yrn-up {
  echo -e "\e[1mRUNNING:\e[21m \e[2mncu -u && yarn --ignore-scripts && yarn upgrade && yarn\e[22m\e[0m"
  ncu -u && yarn --ignore-scripts && yarn upgrade && yarn
}

function yrn-re {
  echo -e "\e[1mRUNNING:\e[21m \e[2myarn --ignore-scripts && yarn upgrade && yarn && ncu\e[22m\e[0m"
  yarn --ignore-scripts && yarn upgrade && yarn && ncu
}

function yrn-lsd {
  echo -e "\e[1mRUNNING:\e[21m \e[2myarn-tools list-duplicates yarn.lock\e[22m\e[0m"
  yarn-tools list-duplicates yarn.lock
}

function yrn-fix {
  echo -e "\e[1mRUNNING:\e[21m \e[2myarn-tools fix-duplicates yarn.lock > yarn.lock.tmp\e[22m\e[0m"
  yarn-tools fix-duplicates yarn.lock > yarn.lock.tmp
  echo -e "\e[1mRUNNING:\e[21m \e[2mmv yarn.lock yarn.lock.orig\e[22m\e[0m"
  mv yarn.lock yarn.lock.orig
  echo -e "\e[1mRUNNING:\e[21m \e[2mmv yarn.lock.tmp yarn.lock\e[22m\e[0m"
  mv yarn.lock.tmp yarn.lock
  yrn-re
}

function yrn-fix-soft {
  echo -e "\e[1mRUNNING:\e[21m \e[2myarn-tools fix-duplicates yarn.lock > yarn.lock.tmp\e[22m\e[0m"
  yarn-tools fix-duplicates yarn.lock > yarn.lock.tmp
  echo -e "\e[1mRUNNING:\e[21m \e[2mmv yarn.lock yarn.lock.orig\e[22m\e[0m"
  mv yarn.lock yarn.lock.orig
  echo -e "\e[1mRUNNING:\e[21m \e[2mmv yarn.lock.tmp yarn.lock\e[22m\e[0m"
  mv yarn.lock.tmp yarn.lock
  echo -e "\e[1mRUNNING:\e[21m \e[2myarn && ncu\e[22m\e[0m"
  yarn && ncu
}

# dodane 2018/06/19
function wv {
  watch -n 10 'npm view @samwise-tech/'$1' versions --json | tail -20'
}

# dodane 2018/10/15
alias ncusw='ncu -ua -f "/^(?!(bootstrap|file-saver|typescript)).*$/"'

# dodane 2018/10/29
alias ssh-hekko='ssh -p 222 tomaoled@s53.hekko.pl'

# The next line updates PATH for the Google Cloud SDK.
if [ -f '/home/tom/Downloads/google-cloud-sdk/path.bash.inc' ]; then . '/home/tom/Downloads/google-cloud-sdk/path.bash.inc'; fi

# The next line enables shell command completion for gcloud.
if [ -f '/home/tom/Downloads/google-cloud-sdk/completion.bash.inc' ]; then . '/home/tom/Downloads/google-cloud-sdk/completion.bash.inc'; fi

.gitconfig

[alias]
	lgf = log --color --graph --pretty=format:'%Cred%h%Creset -%C(yellow)%d%Creset %s %Cgreen(%cr) %C(bold blue)<%an>%Creset' --abbrev-commit
	lg = log --color --graph --pretty=format:'%Cred%h%Creset -%C(yellow)%d%Creset %s %Cgreen(%cr) %C(bold blue)<%an>%Creset' --abbrev-commit -10
        lgm = log master --graph --pretty=format:'%Cred%h%Creset %Creset %s %Cgreen(%cr) %Cred<%an>%Creset' --abbrev-commit --date=relative
        unpushed = log --branches --not --remotes --color --graph --pretty=format:'%Cred%h%Creset -%C(yellow)%d%Creset %s %Cgreen(%cr) %C(bold blue)<%an>%Creset' --abbrev-commit --date=relative
        c = commit
        cm = commit --amend
        ca = commit -a
        cam = commit -a --amend
        cma = commit -a --amend
        co = checkout
        ch = checkout
        chd = checkout develop
	dp = !git chd && git pull && yarn install
	chdd = checkout development
        chm = checkout master
        st = status
        br = branch
        cb = checkout -b
        push-for-review = push origin HEAD:refs/for/master
        pfr = push origin HEAD:refs/for/master
        push-as-draft = push origin HEAD:refs/drafts/master
        pad = push origin HEAD:refs/drafts/master
        ri = rebase -i
        rc = rebase --continue
        ra = rebase --abort
        rom = rebase origin/master
        d = diff
        dc = diff --cached
	dd = diff develop
        s = status
        f = fetch
        rl = reflog --date=iso
        b = branch -va
        rhh = reset HEAD --hard
        from = !git fetch && git rebase origin/master
        frod = !git fetch && git rebase origin/develop
	fd = fetch origin develop:develop
	rd = rebase develop
        frd = !git fd && git rd
	rid = rebase -i develop
[color]
	ui = true
[user]
	name = Tomasz Olędzki
	email = luksfer@poczta.onet.pl
[push]
	default = simple
[core]
	excludesfile = /home/tom/.gitignore
	pager = diff-so-fancy | less --tabs=4 -RFX
[color "diff-highlight"]
	oldNormal = red bold
	oldHighlight = red bold 52
	newNormal = green bold
	newHighlight = green bold 22
[color "diff"]
	meta = yellow
	frag = magenta bold
	commit = yellow bold
	old = red bold
	new = green bold
	whitespace = red reverse