Last active
March 23, 2020 09:49
-
-
Save tomlinton/78d26c74f786107e5964d4cd1d6d649c to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| === START OF INFORMATION SECTION === | |
| Device Model: SAMSUNG MZ7LN512HMJP-00000 | |
| Serial Number: S2MHNB0J301080 | |
| LU WWN Device Id: 5 002538 d41d710a4 | |
| Firmware Version: MAV0100Q | |
| User Capacity: 512,110,190,592 bytes [512 GB] | |
| Sector Size: 512 bytes logical/physical | |
| Rotation Rate: Solid State Device | |
| Form Factor: 2.5 inches | |
| Device is: Not in smartctl database [for details use: -P showall] | |
| ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c | |
| SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Mon Mar 23 10:03:16 2020 CET | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 0) seconds. | |
| Offline data collection | |
| capabilities: (0x53) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| No Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 265) minutes. | |
| SCT capabilities: (0x003d) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 1 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
| 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 18704 | |
| 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 55 | |
| 170 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0 | |
| 171 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0 | |
| 172 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0 | |
| 173 Unknown_Attribute 0x0033 087 087 005 Pre-fail Always - 161 | |
| 174 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 12 | |
| 178 Used_Rsvd_Blk_Cnt_Chip 0x0013 100 100 010 Pre-fail Always - 0 | |
| 180 Unused_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 1640 | |
| 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 | |
| 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
| 194 Temperature_Celsius 0x0032 056 045 000 Old_age Always - 44 | |
| 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 | |
| 233 Media_Wearout_Indicator 0x0013 086 086 000 Pre-fail Always - 14526271 | |
| 241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 26756 | |
| 242 Total_LBAs_Read 0x0032 099 099 000 Old_age Always - 83429 | |
| 249 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 82432 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Extended offline Completed without error 00% 18596 - | |
| # 2 Extended offline Completed without error 00% 18580 - | |
| # 3 Short offline Completed without error 00% 18328 - | |
| # 4 Short offline Completed without error 00% 18327 - | |
| # 5 Extended offline Completed without error 00% 18326 - | |
| # 6 Extended offline Completed without error 00% 18310 - | |
| # 7 Extended offline Completed without error 00% 18122 - | |
| # 8 Extended offline Completed without error 00% 18117 - | |
| # 9 Extended offline Completed without error 00% 18100 - | |
| #10 Extended offline Completed without error 00% 6801 - | |
| #11 Extended offline Completed without error 00% 6785 - | |
| #12 Extended offline Completed without error 00% 6779 - | |
| #13 Extended offline Completed without error 00% 6763 - | |
| #14 Extended offline Completed without error 00% 5948 - | |
| #15 Extended offline Completed without error 00% 5931 - | |
| #16 Extended offline Completed without error 00% 5111 - | |
| #17 Extended offline Completed without error 00% 5095 - | |
| #18 Extended offline Completed without error 00% 5002 - | |
| #19 Extended offline Completed without error 00% 4985 - | |
| #20 Extended offline Completed without error 00% 2521 - | |
| #21 Extended offline Completed without error 00% 2504 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| 255 0 65535 Read_scanning was never started | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| === START OF INFORMATION SECTION === | |
| Device Model: SAMSUNG MZ7LN512HMJP-00000 | |
| Serial Number: S2MHNB0J301084 | |
| LU WWN Device Id: 5 002538 d41d710ad | |
| Firmware Version: MAV0100Q | |
| User Capacity: 512,110,190,592 bytes [512 GB] | |
| Sector Size: 512 bytes logical/physical | |
| Rotation Rate: Solid State Device | |
| Form Factor: 2.5 inches | |
| Device is: Not in smartctl database [for details use: -P showall] | |
| ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c | |
| SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Mon Mar 23 10:48:49 2020 CET | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 0) seconds. | |
| Offline data collection | |
| capabilities: (0x53) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| No Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 265) minutes. | |
| SCT capabilities: (0x003d) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 1 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
| 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 18705 | |
| 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 55 | |
| 170 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0 | |
| 171 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0 | |
| 172 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0 | |
| 173 Unknown_Attribute 0x0033 090 090 005 Pre-fail Always - 125 | |
| 174 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 12 | |
| 178 Used_Rsvd_Blk_Cnt_Chip 0x0013 100 100 010 Pre-fail Always - 0 | |
| 180 Unused_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 1625 | |
| 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 | |
| 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
| 194 Temperature_Celsius 0x0032 067 044 000 Old_age Always - 33 | |
| 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 | |
| 233 Media_Wearout_Indicator 0x0013 089 089 000 Pre-fail Always - 15029588 | |
| 241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 39620 | |
| 242 Total_LBAs_Read 0x0032 099 099 000 Old_age Always - 53199 | |
| 249 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 64032 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Extended offline Completed without error 00% 18596 - | |
| # 2 Extended offline Completed without error 00% 18580 - | |
| # 3 Short offline Completed without error 00% 18328 - | |
| # 4 Short offline Completed without error 00% 18327 - | |
| # 5 Extended offline Completed without error 00% 18326 - | |
| # 6 Extended offline Completed without error 00% 18310 - | |
| # 7 Extended offline Completed without error 00% 18122 - | |
| # 8 Extended offline Completed without error 00% 18117 - | |
| # 9 Extended offline Completed without error 00% 18100 - | |
| #10 Extended offline Completed without error 00% 6801 - | |
| #11 Extended offline Completed without error 00% 6785 - | |
| #12 Extended offline Completed without error 00% 6779 - | |
| #13 Extended offline Completed without error 00% 6763 - | |
| #14 Extended offline Completed without error 00% 5948 - | |
| #15 Extended offline Completed without error 00% 5931 - | |
| #16 Extended offline Completed without error 00% 5111 - | |
| #17 Extended offline Completed without error 00% 5095 - | |
| #18 Extended offline Completed without error 00% 5002 - | |
| #19 Extended offline Completed without error 00% 4985 - | |
| #20 Extended offline Completed without error 00% 2521 - | |
| #21 Extended offline Completed without error 00% 2504 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| 255 0 65535 Read_scanning was never started | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment