Skip to content

Instantly share code, notes, and snippets.

@tomtomme

tomtomme/gist:a249f3ba95a9db6bb46b

Created May 9, 2014 09:14
Show Gist options
  • Save tomtomme/a249f3ba95a9db6bb46b to your computer and use it in GitHub Desktop.
Save tomtomme/a249f3ba95a9db6bb46b to your computer and use it in GitHub Desktop.
Download ZIP
dmesg
Raw
gistfile1.txt
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14.2-25.g1474ea5-desktop (geeko@buildhost) (gcc version 4.8.1 20130909 [gcc-4_8-branch revision 202388] (SUSE Linux) ) #1 SMP PREEMPT Sun Apr 27 14:35:22 UTC 2014 (1474ea5)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.14.2-25.g1474ea5-desktop root=UUID=f79f248d-1575-4bc9-bcc0-b2ca1b4f3cbf resume=/dev/disk/by-id/ata-OCZ-AGILITY2_f0b300375-part2 splash=silent quiet showopts radeon.dpm=1
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cff80000-0x00000000cff8dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cff8e000-0x00000000cffcffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cffd0000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer P5QL-E/P5QL-E, BIOS 1104 09/11/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 220000000 mask FF0000000 write-back
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcff80 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0221f000, 0x0221ffff] PGTABLE
[ 0.000000] BRK [0x02220000, 0x02220fff] PGTABLE
[ 0.000000] BRK [0x02221000, 0x02221fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22fe00000-0x22fffffff]
[ 0.000000] [mem 0x22fe00000-0x22fffffff] page 2M
[ 0.000000] BRK [0x02222000, 0x02222fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22fdfffff]
[ 0.000000] [mem 0x22c000000-0x22fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
[ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcff7ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcff7ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] BRK [0x02223000, 0x02223fff] PGTABLE
[ 0.000000] BRK [0x02224000, 0x02224fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36ce0000-0x37667fff]
[ 0.000000] ACPI: RSDP 00000000000fbb20 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cff80100 00005C (v01 A_M_I_ OEMXSDT 09000911 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff80290 0000F4 (v03 A_M_I_ OEMFACP 09000911 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cff80440 00A01F (v01 A1032 A1032001 00000001 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cff8e000 000040
[ 0.000000] ACPI: APIC 00000000cff80390 00006C (v01 A_M_I_ OEMAPIC 09000911 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff80400 00003C (v01 A_M_I_ OEMMCFG 09000911 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cff8e040 000089 (v01 A_M_I_ AMI_OEM 09000911 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff8a460 000038 (v01 A_M_I_ OEMHPET 09000911 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000cff8a4a0 0000B0 (v01 A_M_I_ OEMOSFR 09000911 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff8ead0 000A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22fffffff]
[ 0.000000] NODE_DATA [mem 0x22ffe6000-0x22fff9fff]
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880227600000-ffff88022e7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x22fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xcff7ffff]
[ 0.000000] node 0: [mem 0x100000000-0x22fffffff]
[ 0.000000] On node 0 totalpages: 2096925
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11591 pages used for memmap
[ 0.000000] DMA32 zone: 847744 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1245184 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcff80000-0xcff8dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcff8e000-0xcffcffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffd0000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s83520 r8192 d22976 u524288
[ 0.000000] pcpu-alloc: s83520 r8192 d22976 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2068233
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14.2-25.g1474ea5-desktop root=UUID=f79f248d-1575-4bc9-bcc0-b2ca1b4f3cbf resume=/dev/disk/by-id/ata-OCZ-AGILITY2_f0b300375-part2 splash=silent quiet showopts radeon.dpm=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8175688K/8387700K available (6226K kernel code, 961K rwdata, 4628K rodata, 1556K init, 1664K bss, 212012K reserved)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2997.001 MHz processor
[ 0.001009] Calibrating delay loop (skipped), value calculated using timer frequency.. 5994.00 BogoMIPS (lpj=2997001)
[ 0.001012] pid_max: default: 32768 minimum: 301
[ 0.001022] ACPI: Core revision 20131218
[ 0.006184] ACPI: All ACPI Tables successfully acquired
[ 0.007028] Security Framework initialized
[ 0.007042] AppArmor: AppArmor initialized
[ 0.008171] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.011072] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012476] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012488] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012754] Initializing cgroup subsys memory
[ 0.012761] Initializing cgroup subsys devices
[ 0.012763] Initializing cgroup subsys freezer
[ 0.012765] Initializing cgroup subsys net_cls
[ 0.012767] Initializing cgroup subsys blkio
[ 0.012768] Initializing cgroup subsys perf_event
[ 0.012770] Initializing cgroup subsys hugetlb
[ 0.012793] CPU: Physical Processor ID: 0
[ 0.012794] CPU: Processor Core ID: 0
[ 0.012796] mce: CPU supports 6 MCE banks
[ 0.012802] CPU0: Thermal monitoring enabled (TM2)
[ 0.012808] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[ 0.012867] Freeing SMP alternatives memory: 24K (ffffffff82077000 - ffffffff8207d000)
[ 0.013797] ftrace: allocating 23974 entries in 94 pages
[ 0.018424] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.028730] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (fam: 06, model: 0f, stepping: 0b)
[ 0.029000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.029000] perf_event_intel: PEBS disabled due to CPU errata
[ 0.029000] ... version: 2
[ 0.029000] ... bit width: 40
[ 0.029000] ... generic registers: 2
[ 0.029000] ... value mask: 000000ffffffffff
[ 0.029000] ... max period: 000000007fffffff
[ 0.029000] ... fixed-purpose events: 3
[ 0.029000] ... event mask: 0000000700000003
[ 0.039120] x86: Booting SMP configuration:
[ 0.039123] .... node #0, CPUs: #1
[ 0.051083] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.053121] #2 #3
[ 0.079020] x86: Booted up 1 node, 4 CPUs
[ 0.079023] smpboot: Total of 4 processors activated (23976.00 BogoMIPS)
[ 0.081066] devtmpfs: initialized
[ 0.087926] PM: Registering ACPI NVS region [mem 0xcff8e000-0xcffcffff] (270336 bytes)
[ 0.088907] pinctrl core: initialized pinctrl subsystem
[ 0.088941] RTC time: 17:04:22, date: 05/08/14
[ 0.088997] NET: Registered protocol family 16
[ 0.089110] cpuidle: using governor ladder
[ 0.089111] cpuidle: using governor menu
[ 0.089144] ACPI: bus type PCI registered
[ 0.089146] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.089249] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.089250] PCI: not using MMCONFIG
[ 0.089252] PCI: Using configuration type 1 for base access
[ 0.090485] bio: create slab <bio-0> at 0
[ 0.090485] ACPI: Added _OSI(Module Device)
[ 0.090485] ACPI: Added _OSI(Processor Device)
[ 0.090485] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.090485] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.092978] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.099174] ACPI: SSDT 00000000cff8e0d0 000277 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.099413] ACPI: Dynamic OEM Table Load:
[ 0.099415] ACPI: SSDT (null) 000277 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.099699] ACPI: SSDT 00000000cff8e350 000277 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.099938] ACPI: Dynamic OEM Table Load:
[ 0.099940] ACPI: SSDT (null) 000277 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.100226] ACPI: SSDT 00000000cff8e5d0 000277 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
[ 0.100465] ACPI: Dynamic OEM Table Load:
[ 0.100467] ACPI: SSDT (null) 000277 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
[ 0.100749] ACPI: SSDT 00000000cff8e850 000277 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
[ 0.100990] ACPI: Dynamic OEM Table Load:
[ 0.100992] ACPI: SSDT (null) 000277 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
[ 0.101178] ACPI: Interpreter enabled
[ 0.101187] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[ 0.101198] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.101200] ACPI: Using IOAPIC for interrupt routing
[ 0.101224] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.102361] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.118266] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.118399] ACPI: No dock devices found.
[ 0.127376] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.127381] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.127386] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.127773] PCI host bridge to bus 0000:00
[ 0.127776] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.127778] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.127780] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.127781] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.127783] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.127785] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
[ 0.127786] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
[ 0.127793] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000
[ 0.127808] DMAR: Forcing write-buffer flush capability
[ 0.127809] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.127887] pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400
[ 0.127917] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.127961] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.128020] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.128056] pci 0000:00:1a.0: reg 0x20: [io 0xc800-0xc81f]
[ 0.128142] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.128188] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.128236] pci 0000:00:1a.1: reg 0x20: [io 0xc880-0xc89f]
[ 0.128322] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.128363] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.128398] pci 0000:00:1a.2: reg 0x20: [io 0xcc00-0xcc1f]
[ 0.128484] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.128532] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.128550] pci 0000:00:1a.7: reg 0x10: [mem 0xfe9ffc00-0xfe9fffff]
[ 0.128626] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.128673] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.128717] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.128729] pci 0000:00:1b.0: reg 0x10: [mem 0xfe9f8000-0xfe9fbfff 64bit]
[ 0.128789] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.128868] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.128927] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.128975] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.129020] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
[ 0.129080] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.129127] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.129168] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.129207] pci 0000:00:1d.0: reg 0x20: [io 0xc080-0xc09f]
[ 0.129305] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.129346] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.129381] pci 0000:00:1d.1: reg 0x20: [io 0xc400-0xc41f]
[ 0.129467] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.129507] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.129542] pci 0000:00:1d.2: reg 0x20: [io 0xc480-0xc49f]
[ 0.129627] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.129675] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.129693] pci 0000:00:1d.7: reg 0x10: [mem 0xfe9ff800-0xfe9ffbff]
[ 0.129769] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.129817] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.129858] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.129931] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.129973] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.130041] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 0.130045] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.130048] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.130150] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[ 0.130165] pci 0000:00:1f.2: reg 0x10: [io 0xbc00-0xbc07]
[ 0.130171] pci 0000:00:1f.2: reg 0x14: [io 0xb880-0xb883]
[ 0.130178] pci 0000:00:1f.2: reg 0x18: [io 0xb800-0xb807]
[ 0.130184] pci 0000:00:1f.2: reg 0x1c: [io 0xb480-0xb483]
[ 0.130190] pci 0000:00:1f.2: reg 0x20: [io 0xb400-0xb41f]
[ 0.130197] pci 0000:00:1f.2: reg 0x24: [mem 0xfe9fe800-0xfe9fefff]
[ 0.130250] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.130328] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.130341] pci 0000:00:1f.3: reg 0x10: [mem 0xfe9ff400-0xfe9ff4ff 64bit]
[ 0.130357] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.130476] pci 0000:01:00.0: [1002:679a] type 00 class 0x030000
[ 0.130486] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.130495] pci 0000:01:00.0: reg 0x18: [mem 0xfea80000-0xfeabffff 64bit]
[ 0.130501] pci 0000:01:00.0: reg 0x20: [io 0xd000-0xd0ff]
[ 0.130512] pci 0000:01:00.0: reg 0x30: [mem 0xfeac0000-0xfeadffff pref]
[ 0.130549] pci 0000:01:00.0: supports D1 D2
[ 0.130551] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.130605] pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300
[ 0.130616] pci 0000:01:00.1: reg 0x10: [mem 0xfeafc000-0xfeafffff 64bit]
[ 0.130670] pci 0000:01:00.1: supports D1 D2
[ 0.130720] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.130723] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.130725] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.130728] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.130775] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.130783] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.130845] pci 0000:02:00.0: [1969:1026] type 00 class 0x020000
[ 0.130866] pci 0000:02:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
[ 0.130877] pci 0000:02:00.0: reg 0x18: [io 0xec00-0xec7f]
[ 0.130969] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.131025] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.131033] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.131036] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.131039] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.131106] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.131113] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.131115] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.131117] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.131119] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.131121] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.131122] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.131562] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.131632] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.131700] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.131768] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.131836] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.131905] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.131973] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.132043] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.132102] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.132158] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.132158] vgaarb: loaded
[ 0.132158] vgaarb: bridge control possible 0000:01:00.0
[ 0.132158] SCSI subsystem initialized
[ 0.132169] libata version 3.00 loaded.
[ 0.132169] ACPI: bus type USB registered
[ 0.132169] usbcore: registered new interface driver usbfs
[ 0.132169] usbcore: registered new interface driver hub
[ 0.132169] usbcore: registered new device driver usb
[ 0.132169] PCI: Using ACPI for IRQ routing
[ 0.137431] PCI: pci_cache_line_size set to 64 bytes
[ 0.137470] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.137472] e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff]
[ 0.137565] NetLabel: Initializing
[ 0.137567] NetLabel: domain hash size = 128
[ 0.137568] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.137582] NetLabel: unlabeled traffic allowed by default
[ 0.137606] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.137609] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.137613] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.139023] Switched to clocksource hpet
[ 0.145156] AppArmor: AppArmor Filesystem Enabled
[ 0.145185] pnp: PnP ACPI init
[ 0.145202] ACPI: bus type PNP registered
[ 0.145287] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.145290] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.145340] pnp 00:01: [dma 4]
[ 0.145363] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.145403] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.145431] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.145461] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.145680] system 00:05: [io 0x0290-0x029f] has been reserved
[ 0.145682] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.145849] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.145852] system 00:06: [io 0x0800-0x087f] could not be reserved
[ 0.145854] system 00:06: [io 0x0500-0x057f] could not be reserved
[ 0.145857] system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.145859] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.145861] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.145863] system 00:06: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.145865] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.145962] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.146050] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.146126] system 00:09: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.146129] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146328] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.146331] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.146333] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146396] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.146483] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.146485] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146717] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.146720] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.146722] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.146724] system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.146726] system 00:0d: [mem 0xe0000000-0xffffffff] could not be reserved
[ 0.146728] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.146884] pnp: PnP ACPI: found 14 devices
[ 0.146886] ACPI: bus type PNP unregistered
[ 0.154681] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.154685] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 400000
[ 0.154692] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.154701] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.154704] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.154706] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.154708] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.154713] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
[ 0.154717] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.154719] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.154722] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.154724] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.154727] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.154729] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.154732] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.154734] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.154738] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
[ 0.154741] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.154746] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.154748] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.154752] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.154755] pci 0000:00:1c.5: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.154760] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.154768] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.154770] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.154772] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.154773] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.154775] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.154776] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.154778] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.154780] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.154782] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.154784] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.154785] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf03fffff]
[ 0.154787] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.154789] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.154790] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.154792] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.154794] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.154796] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.154797] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.154799] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.154800] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.154802] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.154886] NET: Registered protocol family 2
[ 0.155137] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.155331] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.155568] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.155599] TCP: reno registered
[ 0.155609] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.155650] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.155782] NET: Registered protocol family 1
[ 0.156798] pci 0000:01:00.0: Boot video device
[ 0.156804] PCI: CLS 32 bytes, default 64
[ 0.156865] Unpacking initramfs...
[ 0.294874] Freeing initrd memory: 9760K (ffff880036ce0000 - ffff880037668000)
[ 0.294881] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.294883] software IO TLB [mem 0xcbf80000-0xcff80000] (64MB) mapped at [ffff8800cbf80000-ffff8800cff7ffff]
[ 0.295147] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb6
[ 0.295153] microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb6
[ 0.295165] microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb6
[ 0.295178] microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb6
[ 0.295249] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.295266] Scanning for low memory corruption every 60 seconds
[ 0.295578] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.295604] Initialise system trusted keyring
[ 0.295674] audit: initializing netlink subsys (disabled)
[ 0.295696] audit: type=2000 audit(1399568662.294:1): initialized
[ 0.311224] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.311247] zbud: loaded
[ 0.311444] VFS: Disk quotas dquot_6.5.2
[ 0.311473] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.311756] msgmni has been set to 15987
[ 0.311789] Key type big_key registered
[ 0.411217] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.411272] io scheduler noop registered
[ 0.411274] io scheduler deadline registered
[ 0.411292] io scheduler cfq registered (default)
[ 0.411467] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.411511] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.411581] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.411700] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.411777] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.411792] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.411831] intel_idle: does not run on family 6 model 15
[ 0.411867] GHES: HEST is not enabled!
[ 0.411930] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[ 0.413530] Non-volatile memory driver v1.3
[ 0.413532] Linux agpgart interface v0.103
[ 0.413697] ahci 0000:00:1f.2: version 3.0
[ 0.413804] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.413828] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.413855] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.413858] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 0.423681] scsi0 : ahci
[ 0.423818] scsi1 : ahci
[ 0.423934] scsi2 : ahci
[ 0.424063] scsi3 : ahci
[ 0.424177] scsi4 : ahci
[ 0.424292] scsi5 : ahci
[ 0.424336] ata1: SATA max UDMA/133 abar m2048@0xfe9fe800 port 0xfe9fe900 irq 43
[ 0.424338] ata2: SATA max UDMA/133 abar m2048@0xfe9fe800 port 0xfe9fe980 irq 43
[ 0.424340] ata3: SATA max UDMA/133 abar m2048@0xfe9fe800 port 0xfe9fea00 irq 43
[ 0.424342] ata4: SATA max UDMA/133 abar m2048@0xfe9fe800 port 0xfe9fea80 irq 43
[ 0.424343] ata5: SATA max UDMA/133 abar m2048@0xfe9fe800 port 0xfe9feb00 irq 43
[ 0.424345] ata6: SATA max UDMA/133 abar m2048@0xfe9fe800 port 0xfe9feb80 irq 43
[ 0.424370] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.424380] ehci-pci: EHCI PCI platform driver
[ 0.424485] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.424492] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.424506] ehci-pci 0000:00:1a.7: debug port 1
[ 0.428411] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.428423] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe9ffc00
[ 0.434019] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.434072] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.434075] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.434078] usb usb1: Product: EHCI Host Controller
[ 0.434080] usb usb1: Manufacturer: Linux 3.14.2-25.g1474ea5-desktop ehci_hcd
[ 0.434083] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.434213] hub 1-0:1.0: USB hub found
[ 0.434219] hub 1-0:1.0: 6 ports detected
[ 0.434434] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.434439] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.434449] ehci-pci 0000:00:1d.7: debug port 1
[ 0.438360] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.438372] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe9ff800
[ 0.444017] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.444063] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.444066] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.444068] usb usb2: Product: EHCI Host Controller
[ 0.444071] usb usb2: Manufacturer: Linux 3.14.2-25.g1474ea5-desktop ehci_hcd
[ 0.444073] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.444196] hub 2-0:1.0: USB hub found
[ 0.444202] hub 2-0:1.0: 6 ports detected
[ 0.444341] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.444344] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.444428] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.444434] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.444440] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.444464] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
[ 0.444502] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.444504] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.444506] usb usb3: Product: UHCI Host Controller
[ 0.444508] usb usb3: Manufacturer: Linux 3.14.2-25.g1474ea5-desktop uhci_hcd
[ 0.444509] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.444605] hub 3-0:1.0: USB hub found
[ 0.444612] hub 3-0:1.0: 2 ports detected
[ 0.444757] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.444762] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.444768] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.444791] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
[ 0.444830] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.444832] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.444834] usb usb4: Product: UHCI Host Controller
[ 0.444836] usb usb4: Manufacturer: Linux 3.14.2-25.g1474ea5-desktop uhci_hcd
[ 0.444837] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.444926] hub 4-0:1.0: USB hub found
[ 0.444932] hub 4-0:1.0: 2 ports detected
[ 0.445082] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.445087] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.445093] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.445109] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00
[ 0.445147] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.445149] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.445150] usb usb5: Product: UHCI Host Controller
[ 0.445152] usb usb5: Manufacturer: Linux 3.14.2-25.g1474ea5-desktop uhci_hcd
[ 0.445153] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.445243] hub 5-0:1.0: USB hub found
[ 0.445249] hub 5-0:1.0: 2 ports detected
[ 0.445394] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.445399] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.445405] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.445421] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080
[ 0.445459] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.445461] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.445462] usb usb6: Product: UHCI Host Controller
[ 0.445464] usb usb6: Manufacturer: Linux 3.14.2-25.g1474ea5-desktop uhci_hcd
[ 0.445465] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.445557] hub 6-0:1.0: USB hub found
[ 0.445563] hub 6-0:1.0: 2 ports detected
[ 0.445706] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.445712] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.445718] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.445742] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
[ 0.445780] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.445782] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.445784] usb usb7: Product: UHCI Host Controller
[ 0.445786] usb usb7: Manufacturer: Linux 3.14.2-25.g1474ea5-desktop uhci_hcd
[ 0.445787] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.445876] hub 7-0:1.0: USB hub found
[ 0.445883] hub 7-0:1.0: 2 ports detected
[ 0.446033] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.446038] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.446044] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.446059] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
[ 0.446097] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.446099] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.446101] usb usb8: Product: UHCI Host Controller
[ 0.446102] usb usb8: Manufacturer: Linux 3.14.2-25.g1474ea5-desktop uhci_hcd
[ 0.446104] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.446193] hub 8-0:1.0: USB hub found
[ 0.446199] hub 8-0:1.0: 2 ports detected
[ 0.446315] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.446317] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.446809] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.446910] mousedev: PS/2 mouse device common for all mice
[ 0.447036] rtc_cmos 00:02: RTC can wake from S4
[ 0.447180] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.447205] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.447218] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.447238] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.447335] usbcore: registered new interface driver usbhid
[ 0.447336] usbhid: USB HID core driver
[ 0.447406] TCP: cubic registered
[ 0.447455] NET: Registered protocol family 10
[ 0.447892] Loading compiled-in X.509 certificates
[ 0.447904] registered taskstats version 1
[ 0.447927] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.448246] Magic number: 14:908:86
[ 0.448338] rtc_cmos 00:02: setting system clock to 2014-05-08 17:04:22 UTC (1399568662)
[ 0.448393] PM: Checking hibernation image partition /dev/disk/by-id/ata-OCZ-AGILITY2_f0b300375-part2
[ 0.472862] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.884024] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.889815] ata1.00: ATA-8: SAMSUNG HD153WI, 1AN10002, max UDMA/133
[ 0.889819] ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 0.895647] ata1.00: configured for UDMA/133
[ 0.895774] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD153WI 1AN1 PQ: 0 ANSI: 5
[ 0.895916] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 0.895964] sd 0:0:0:0: [sda] Write Protect is off
[ 0.895966] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.895981] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.901320] sda: sda1
[ 0.901515] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.998030] usb 2-6: new high-speed USB device number 3 using ehci-pci
[ 1.112419] usb 2-6: New USB device found, idVendor=0424, idProduct=2514
[ 1.112423] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.112714] hub 2-6:1.0: USB hub found
[ 1.112791] hub 2-6:1.0: 3 ports detected
[ 1.296166] tsc: Refined TSC clocksource calibration: 2996.999 MHz
[ 1.319040] usb 8-1: new full-speed USB device number 2 using uhci_hcd
[ 1.355051] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.409057] ata2.00: ATA-8: OCZ-AGILITY2, 1.00, max UDMA/133
[ 1.409061] ata2.00: 97696368 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.458970] ata2.00: configured for UDMA/133
[ 1.459087] scsi 1:0:0:0: Direct-Access ATA OCZ-AGILITY2 1.00 PQ: 0 ANSI: 5
[ 1.459200] sd 1:0:0:0: [sdb] 97696368 512-byte logical blocks: (50.0 GB/46.5 GiB)
[ 1.459243] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.459246] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.459261] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.459735] sdb: sdb1 sdb2
[ 1.459988] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.479093] usb 8-1: New USB device found, idVendor=09da, idProduct=8090
[ 1.479097] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.479100] usb 8-1: Product: USB Full Speed
[ 1.479102] usb 8-1: Manufacturer: A4Tech
[ 1.486478] input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/0003:09DA:8090.0001/input/input1
[ 1.486569] hid-generic 0003:09DA:8090.0001: input,hidraw0: USB HID v1.11 Mouse [A4Tech USB Full Speed] on usb-0000:00:1d.2-1/input0
[ 1.489768] input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/0003:09DA:8090.0002/input/input2
[ 1.489891] hid-generic 0003:09DA:8090.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [A4Tech USB Full Speed] on usb-0000:00:1d.2-1/input1
[ 1.666179] usb 2-6.3: new high-speed USB device number 4 using ehci-pci
[ 1.752164] usb 2-6.3: New USB device found, idVendor=13fd, idProduct=1840
[ 1.752167] usb 2-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.752170] usb 2-6.3: Product: USB 2.0 Drive
[ 1.752172] usb 2-6.3: Manufacturer: PI-239
[ 1.752175] usb 2-6.3: SerialNumber: 31314C435043574154202020
[ 1.764026] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.224025] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.230378] ata4.00: ATA-7: SAMSUNG HD322HJ, 1AC01113, max UDMA7
[ 2.230381] ata4.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.236782] ata4.00: configured for UDMA/133
[ 2.236858] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD322HJ 1AC0 PQ: 0 ANSI: 5
[ 2.236947] sd 3:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.236978] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.236980] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.236995] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.243412] sdc: sdc1 sdc2
[ 2.243632] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.296084] Switched to clocksource tsc
[ 2.696020] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.697623] ata5.00: ATAPI: Optiarc DVD RW AD-7240S, 1.04, max UDMA/100
[ 2.699496] ata5.00: configured for UDMA/100
[ 2.700991] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7240S 1.04 PQ: 0 ANSI: 5
[ 3.161020] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.167367] ata6.00: ATA-7: SAMSUNG HD322HJ, 1AC01113, max UDMA7
[ 3.167371] ata6.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.173771] ata6.00: configured for UDMA/133
[ 3.173841] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD322HJ 1AC0 PQ: 0 ANSI: 5
[ 3.173926] sd 5:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.173957] sd 5:0:0:0: [sdd] Write Protect is off
[ 3.173959] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 3.173973] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.181679] sdd: unknown partition table
[ 3.181783] sd 5:0:0:0: [sdd] Attached SCSI disk
[ 3.181789] PM: Hibernation image not present or could not be loaded.
[ 3.182882] Freeing unused kernel memory: 1556K (ffffffff81ef2000 - ffffffff82077000)
[ 3.182884] Write protecting the kernel read-only data: 14336k
[ 3.186899] Freeing unused kernel memory: 1956K (ffff880001617000 - ffff880001800000)
[ 3.189911] Freeing unused kernel memory: 1516K (ffff880001c85000 - ffff880001e00000)
[ 3.218040] hp_sw: device handler registered
[ 3.219248] emc: device handler registered
[ 3.220426] rdac: device handler registered
[ 3.221634] alua: device handler registered
[ 3.225130] systemd-udevd[138]: starting version 208
[ 3.300920] random: nonblocking pool is initialized
[ 3.580151] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb6
[ 3.581147] microcode: CPU0 updated to revision 0xba, date = 2010-10-03
[ 3.584645] microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb6
[ 3.585635] microcode: CPU1 updated to revision 0xba, date = 2010-10-03
[ 3.589134] microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb6
[ 3.590000] microcode: CPU2 updated to revision 0xba, date = 2010-10-03
[ 3.593673] microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb6
[ 3.594671] microcode: CPU3 updated to revision 0xba, date = 2010-10-03
[ 3.618408] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[ 3.618413] PM: Marking nosave pages: [mem 0xcff80000-0xffffffff]
[ 3.618844] PM: Basic memory bitmaps created
[ 3.640111] PM: Basic memory bitmaps freed
[ 3.646972] PM: Starting manual resume from disk
[ 3.646976] PM: Hibernation image partition 8:18 present
[ 3.646977] PM: Looking for hibernation image.
[ 3.647088] PM: Image not found (code -22)
[ 3.647090] PM: Hibernation image not present or could not be loaded.
[ 3.675415] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.792768] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.793908] systemd[1]: Set hostname to <linux>.
[ 3.837799] device-mapper: uevent: version 1.0.3
[ 3.837882] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 3.839887] LVM: Logical Volume autoactivation enabled.
[ 3.839905] LVM: Activation generator successfully completed.
[ 3.908881] systemd[1]: Starting Replay Read-Ahead Data...
[ 3.909395] systemd[1]: Starting Collect Read-Ahead Data...
[ 3.909704] systemd[1]: Starting Syslog Socket.
[ 3.909745] systemd[1]: Listening on Syslog Socket.
[ 3.909781] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.909799] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.909813] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.909833] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.909840] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.909861] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.909879] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.909920] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.909931] systemd[1]: Starting Encrypted Volumes.
[ 3.909940] systemd[1]: Reached target Encrypted Volumes.
[ 3.909968] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.910054] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.910068] systemd[1]: Starting Journal Socket.
[ 3.910105] systemd[1]: Listening on Journal Socket.
[ 3.910121] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.910573] systemd[1]: Mounting Huge Pages File System...
[ 3.911049] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.911418] systemd[1]: Starting Create dynamic rule for /dev/root link...
[ 3.911782] systemd[1]: Starting LSB: iSCSI initiator daemon root-fs support...
[ 3.912105] systemd[1]: Starting Journal Service...
[ 3.912277] systemd-readahead[261]: Bumped block_nr parameter of 8:16 to 20480. This is a temporary hack and should be removed one day.
[ 3.912531] systemd[1]: Started Journal Service.
[ 3.947423] systemd-journald[268]: Vacuuming done, freed 0 bytes
[ 3.986517] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.986554] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 3.986605] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 3.986651] scsi 4:0:0:0: Attached scsi generic sg3 type 5
[ 3.986685] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 3.988021] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 3.990414] systemd-udevd[302]: starting version 208
[ 4.040190] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 4.040233] ACPI: Power Button [PWRB]
[ 4.040285] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.040316] ACPI: Power Button [PWRF]
[ 4.049071] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.051353] [drm] Initialized drm 1.1.0 20060810
[ 4.059177] [drm] radeon kernel modesetting enabled.
[ 4.059420] [drm] initializing kernel modesetting (TAHITI 0x1002:0x679A 0x1458:0x254C).
[ 4.059456] [drm] register mmio base: 0xFEA80000
[ 4.059457] [drm] register mmio size: 262144
[ 4.059564] ATOM BIOS: GV
[ 4.059634] radeon 0000:01:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used)
[ 4.059636] radeon 0000:01:00.0: GTT: 1024M 0x00000000C0000000 - 0x00000000FFFFFFFF
[ 4.059638] [drm] Detected VRAM RAM=3072M, BAR=256M
[ 4.059639] [drm] RAM width 384bits DDR
[ 4.059692] [TTM] Zone kernel: Available graphics memory: 4095250 kiB
[ 4.059693] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 4.059694] [TTM] Initializing pool allocator
[ 4.059699] [TTM] Initializing DMA pool allocator
[ 4.059716] [drm] radeon: 3072M of VRAM memory ready
[ 4.059717] [drm] radeon: 1024M of GTT memory ready.
[ 4.059732] [drm] Loading TAHITI Microcode
[ 4.065296] [drm] Internal thermal controller with fan control
[ 4.065399] [drm] probing gen 2 caps for device 8086:2e21 = 2212502/0
[ 4.065426] == power state 0 ==
[ 4.065427] ui class: none
[ 4.065429] internal class: boot
[ 4.065431] caps:
[ 4.065432] uvd vclk: 0 dclk: 0
[ 4.065434] power level 0 sclk: 50000 mclk: 15000 vddc: 950 vddci: 875 pcie gen: 2
[ 4.065435] status: c r b
[ 4.065438] == power state 1 ==
[ 4.065438] ui class: performance
[ 4.065440] internal class: none
[ 4.065441] caps:
[ 4.065443] uvd vclk: 0 dclk: 0
[ 4.065444] power level 0 sclk: 30000 mclk: 15000 vddc: 850 vddci: 875 pcie gen: 2
[ 4.065446] power level 1 sclk: 50100 mclk: 125000 vddc: 950 vddci: 875 pcie gen: 2
[ 4.065447] power level 2 sclk: 90000 mclk: 125000 vddc: 1090 vddci: 875 pcie gen: 2
[ 4.065448] status:
[ 4.065450] == power state 2 ==
[ 4.065451] ui class: none
[ 4.065452] internal class: uvd
[ 4.065453] caps: video
[ 4.065455] uvd vclk: 72000 dclk: 56000
[ 4.065457] power level 0 sclk: 50100 mclk: 125000 vddc: 950 vddci: 875 pcie gen: 2
[ 4.065459] power level 1 sclk: 50100 mclk: 125000 vddc: 950 vddci: 875 pcie gen: 2
[ 4.065460] power level 2 sclk: 90000 mclk: 125000 vddc: 1090 vddci: 875 pcie gen: 2
[ 4.065461] status:
[ 4.065462] == power state 3 ==
[ 4.065463] ui class: none
[ 4.065464] internal class: ulv
[ 4.065466] caps:
[ 4.065467] uvd vclk: 0 dclk: 0
[ 4.065469] power level 0 sclk: 30000 mclk: 15000 vddc: 800 vddci: 875 pcie gen: 2
[ 4.065472] power level 1 sclk: 30000 mclk: 15000 vddc: 800 vddci: 875 pcie gen: 2
[ 4.065474] power level 2 sclk: 30000 mclk: 15000 vddc: 800 vddci: 875 pcie gen: 2
[ 4.065475] status:
[ 4.071566] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000084f (\PMRG) (20131218/utaddress-258)
[ 4.071573] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.071576] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000053f (\GPS0) (20131218/utaddress-258)
[ 4.071579] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.071580] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000053f (\GPS0) (20131218/utaddress-258)
[ 4.071583] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.071584] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.074560] [drm] radeon: dpm initialized
[ 4.084049] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 4.085901] usb-storage 2-6.3:1.0: USB Mass Storage device detected
[ 4.087109] [drm] probing gen 2 caps for device 8086:2e21 = 2212502/0
[ 4.087116] [drm] PCIE gen 2 link speeds already enabled
[ 4.088390] scsi6 : usb-storage 2-6.3:1.0
[ 4.088472] usbcore: registered new interface driver usb-storage
[ 4.088784] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.089458] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041f conflicts with OpRegion 0x0000000000000400-0x000000000000040f (\SMRG) (20131218/utaddress-258)
[ 4.089464] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.096443] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.096446] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.096696] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.104465] coretemp coretemp.0: Using relative temperature scale!
[ 4.104475] coretemp coretemp.0: Using relative temperature scale!
[ 4.104484] coretemp coretemp.0: Using relative temperature scale!
[ 4.104494] coretemp coretemp.0: Using relative temperature scale!
[ 4.112558] [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
[ 4.112738] radeon 0000:01:00.0: WB enabled
[ 4.112741] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0xffff880223804c00
[ 4.112744] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0xffff880223804c04
[ 4.112745] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0xffff880223804c08
[ 4.112747] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0xffff880223804c0c
[ 4.112749] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0xffff880223804c10
[ 4.114161] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90011035a18
[ 4.114165] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.114166] [drm] Driver supports precise vblank timestamp query.
[ 4.114189] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
[ 4.114201] radeon 0000:01:00.0: radeon: using MSI.
[ 4.114224] [drm] radeon: irq initialized.
[ 4.125082] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 4.132134] iTCO_vendor_support: vendor-support=0
[ 4.132286] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 4.132316] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 4.134214] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.137739] ALSA patch_realtek.c:434 SKU: Nid=0x1d sku_cfg=0x4015e601
[ 4.137744] ALSA patch_realtek.c:436 SKU: port_connectivity=0x1
[ 4.137745] ALSA patch_realtek.c:437 SKU: enable_pcbeep=0x1
[ 4.137747] ALSA patch_realtek.c:438 SKU: check_sum=0x00000005
[ 4.137748] ALSA patch_realtek.c:439 SKU: customization=0x000000e6
[ 4.137750] ALSA patch_realtek.c:440 SKU: external_amp=0x0
[ 4.137751] ALSA patch_realtek.c:441 SKU: platform_type=0x0
[ 4.137752] ALSA patch_realtek.c:442 SKU: swap=0x0
[ 4.137754] ALSA patch_realtek.c:443 SKU: override=0x1
[ 4.138191] ALSA hda_auto_parser.c:393 autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 4.138193] ALSA hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.138195] ALSA hda_auto_parser.c:401 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 4.138196] ALSA hda_auto_parser.c:402 mono: mono_out=0x0
[ 4.138197] ALSA hda_auto_parser.c:405 dig-out=0x11/0x1e
[ 4.138199] ALSA hda_auto_parser.c:406 inputs:
[ 4.138201] ALSA hda_auto_parser.c:410 Front Mic=0x19
[ 4.138202] ALSA hda_auto_parser.c:410 Rear Mic=0x18
[ 4.138204] ALSA hda_auto_parser.c:410 Line=0x1a
[ 4.138206] ALSA patch_realtek.c:504 realtek: No valid SSID, checking pincfg 0x4015e601 for NID 0x1d
[ 4.138207] ALSA patch_realtek.c:520 realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0888
[ 4.141772] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 4.151136] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 4.151231] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 4.151313] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.151385] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.151492] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.151599] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.151699] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.151805] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 4.222581] Adding 8685564k swap on /dev/sdb2. Priority:-1 extents:1 across:8685564k SSFS
[ 4.290585] [drm] ring test on 0 succeeded in 1 usecs
[ 4.290591] [drm] ring test on 1 succeeded in 1 usecs
[ 4.290596] [drm] ring test on 2 succeeded in 1 usecs
[ 4.290660] [drm] ring test on 3 succeeded in 2 usecs
[ 4.290667] [drm] ring test on 4 succeeded in 1 usecs
[ 4.440958] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.487843] [drm] ring test on 5 succeeded in 1 usecs
[ 4.487849] [drm] UVD initialized successfully.
[ 4.489444] [drm] ib test on ring 0 succeeded in 0 usecs
[ 4.489465] [drm] ib test on ring 1 succeeded in 0 usecs
[ 4.489484] [drm] ib test on ring 2 succeeded in 0 usecs
[ 4.489503] [drm] ib test on ring 3 succeeded in 0 usecs
[ 4.489522] [drm] ib test on ring 4 succeeded in 1 usecs
[ 4.499252] tun: Universal TUN/TAP device driver, 1.6
[ 4.499255] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 4.541093] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.561144] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.568849] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 4.642825] [drm] ib test on ring 5 succeeded
[ 4.643820] [drm] Radeon Display Connectors
[ 4.643822] [drm] Connector 0:
[ 4.643823] [drm] DP-1
[ 4.643824] [drm] HPD5
[ 4.643826] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 4.643827] [drm] Encoders:
[ 4.643828] [drm] DFP1: INTERNAL_UNIPHY2
[ 4.643829] [drm] Connector 1:
[ 4.643830] [drm] DP-2
[ 4.643831] [drm] HPD4
[ 4.643832] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 4.643833] [drm] Encoders:
[ 4.643834] [drm] DFP2: INTERNAL_UNIPHY2
[ 4.643835] [drm] Connector 2:
[ 4.643836] [drm] HDMI-A-1
[ 4.643837] [drm] HPD1
[ 4.643838] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 4.643839] [drm] Encoders:
[ 4.643840] [drm] DFP3: INTERNAL_UNIPHY1
[ 4.643841] [drm] Connector 3:
[ 4.643842] [drm] DVI-I-1
[ 4.643843] [drm] HPD3
[ 4.643844] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[ 4.643845] [drm] Encoders:
[ 4.643846] [drm] DFP4: INTERNAL_UNIPHY
[ 4.643847] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.643917] switching from power state:
[ 4.643919] ui class: none
[ 4.643921] internal class: boot
[ 4.643922] caps:
[ 4.643924] uvd vclk: 0 dclk: 0
[ 4.643926] power level 0 sclk: 50000 mclk: 15000 vddc: 950 vddci: 875 pcie gen: 2
[ 4.643927] status: c b
[ 4.643928] switching to power state:
[ 4.643929] ui class: performance
[ 4.643930] internal class: none
[ 4.643931] caps:
[ 4.643933] uvd vclk: 0 dclk: 0
[ 4.643934] power level 0 sclk: 30000 mclk: 15000 vddc: 850 vddci: 875 pcie gen: 2
[ 4.643936] power level 1 sclk: 50100 mclk: 125000 vddc: 950 vddci: 875 pcie gen: 2
[ 4.643937] power level 2 sclk: 90000 mclk: 125000 vddc: 1090 vddci: 875 pcie gen: 2
[ 4.643938] status: r
[ 4.663734] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.670671] FS-Cache: Loaded
[ 4.672559] RPC: Registered named UNIX socket transport module.
[ 4.672561] RPC: Registered udp transport module.
[ 4.672563] RPC: Registered tcp transport module.
[ 4.672564] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.676431] FS-Cache: Netfs 'nfs' registered for caching
[ 4.681229] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 4.688926] [drm] fb mappable at 0xD1480000
[ 4.688929] [drm] vram apper at 0xD0000000
[ 4.688931] [drm] size 8294400
[ 4.688932] [drm] fb depth is 24
[ 4.688933] [drm] pitch is 7680
[ 4.690992] fbcon: radeondrmfb (fb0) is primary device
[ 4.692380] switching from power state:
[ 4.692382] ui class: performance
[ 4.692382] internal class: none
[ 4.692383] caps:
[ 4.692384] uvd vclk: 0 dclk: 0
[ 4.692385] power level 0 sclk: 30000 mclk: 15000 vddc: 850 vddci: 875 pcie gen: 2
[ 4.692386] power level 1 sclk: 50100 mclk: 125000 vddc: 950 vddci: 875 pcie gen: 2
[ 4.692387] power level 2 sclk: 90000 mclk: 125000 vddc: 1090 vddci: 875 pcie gen: 2
[ 4.692388] status: c r
[ 4.692388] switching to power state:
[ 4.692389] ui class: performance
[ 4.692389] internal class: none
[ 4.692390] caps:
[ 4.692390] uvd vclk: 0 dclk: 0
[ 4.692391] power level 0 sclk: 30000 mclk: 15000 vddc: 850 vddci: 875 pcie gen: 2
[ 4.692392] power level 1 sclk: 50100 mclk: 125000 vddc: 950 vddci: 875 pcie gen: 2
[ 4.692393] power level 2 sclk: 90000 mclk: 125000 vddc: 1090 vddci: 875 pcie gen: 2
[ 4.692394] status: c r
[ 4.695486] Bluetooth: Core ver 2.18
[ 4.695531] NET: Registered protocol family 31
[ 4.695531] Bluetooth: HCI device and connection manager initialized
[ 4.695538] Bluetooth: HCI socket layer initialized
[ 4.695540] Bluetooth: L2CAP socket layer initialized
[ 4.695552] Bluetooth: SCO socket layer initialized
[ 4.697596] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.697597] Bluetooth: BNEP filters: protocol multicast
[ 4.697604] Bluetooth: BNEP socket layer initialized
[ 4.705202] Console: switching to colour frame buffer device 240x67
[ 4.709894] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 4.709896] radeon 0000:01:00.0: registered panic notifier
[ 4.715957] [drm] Initialized radeon 2.37.0 20080528 for 0000:01:00.0 on minor 0
[ 4.716078] ALSA hda_intel.c:3186 0000:01:00.1: Handle VGA-switcheroo audio client
[ 4.716081] ALSA hda_intel.c:3390 0000:01:00.1: Using LPIB position fix
[ 4.716083] ALSA hda_intel.c:3515 0000:01:00.1: Force to non-snoop mode
[ 4.716148] snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X
[ 4.723162] ALSA hda_intel.c:1799 0000:01:00.1: Enable sync_write for stable communication
[ 4.737353] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[ 4.737750] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[ 4.737830] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 4.737906] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 4.737977] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 4.738057] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 4.741098] systemd-journald[268]: Received request to flush runtime journal from PID 1
[ 4.786951] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 4.787293] NFSD: starting 90-second grace period (net ffffffff81eb51c0)
[ 5.091441] scsi 6:0:0:0: Direct-Access PI-239 USB 2.0 Drive 1.08 PQ: 0 ANSI: 4
[ 5.091675] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 5.092807] sd 6:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 5.094040] sd 6:0:0:0: [sde] Write Protect is off
[ 5.094044] sd 6:0:0:0: [sde] Mode Sense: 23 00 00 00
[ 5.094666] sd 6:0:0:0: [sde] No Caching mode page found
[ 5.094668] sd 6:0:0:0: [sde] Assuming drive cache: write through
[ 5.096676] sd 6:0:0:0: [sde] No Caching mode page found
[ 5.096680] sd 6:0:0:0: [sde] Assuming drive cache: write through
[ 5.097059] sde: sde1
[ 5.100668] sd 6:0:0:0: [sde] No Caching mode page found
[ 5.100671] sd 6:0:0:0: [sde] Assuming drive cache: write through
[ 5.100674] sd 6:0:0:0: [sde] Attached SCSI disk
[ 6.249337] ATL1E 0000:02:00.0 eth0: NIC Link is Up <1000 Mbps Full Duplex>
[ 6.249352] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.273031] NET: Registered protocol family 17
[ 7.056108] floppy0: no floppy controllers found
[ 12.707429] fuse init (API version 7.22)
[ 2610.970476] Syncing filesystems ... done.
[ 2610.975539] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 2610.977394] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[ 2610.977399] PM: Marking nosave pages: [mem 0xcff80000-0xffffffff]
[ 2610.977830] PM: Basic memory bitmaps created
[ 2610.983507] PM: Preallocating image memory... done (allocated 638456 pages)
[ 2611.221758] PM: Allocated 2553824 kbytes in 0.23 seconds (11103.58 MB/s)
[ 2611.221760] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2611.223297] Suspending console(s) (use no_console_suspend to debug)
[ 2611.223707] i8042 kbd 00:0b: System wakeup enabled by ACPI
[ 2612.112169] PM: freeze of devices complete after 888.869 msecs
[ 2612.112318] PM: late freeze of devices complete after 0.147 msecs
[ 2612.112669] PM: noirq freeze of devices complete after 0.350 msecs
[ 2612.113084] ACPI: Preparing to enter system sleep state S4
[ 2612.113375] PM: Saving platform NVS memory
[ 2612.113671] Disabling non-boot CPUs ...
[ 2612.113970] Broke affinity for irq 43
[ 2612.114904] kvm: disabling virtualization on CPU1
[ 2612.115001] smpboot: CPU 1 is now offline
[ 2612.115568] Broke affinity for irq 44
[ 2612.116479] kvm: disabling virtualization on CPU2
[ 2612.116601] smpboot: CPU 2 is now offline
[ 2612.117265] Broke affinity for irq 18
[ 2612.118184] kvm: disabling virtualization on CPU3
[ 2612.118313] smpboot: CPU 3 is now offline
[ 2612.118629] PM: Creating hibernation image:
[ 2612.119308] PM: Need to copy 683565 pages
[ 2612.119308] PM: Normal pages needed: 683565 + 1024, available pages: 1413203
[ 2612.119308] PM: Restoring platform NVS memory
[ 2612.119308] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xba
[ 2612.119308] Enabling non-boot CPUs ...
[ 2612.119308] x86: Booting SMP configuration:
[ 2612.119308] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 2612.114904] kvm: enabling virtualization on CPU1
[ 2612.131997] microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xba
[ 2612.132172] CPU1 is up
[ 2612.132274] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 2612.116479] kvm: enabling virtualization on CPU2
[ 2612.145541] microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xba
[ 2612.145700] CPU2 is up
[ 2612.145834] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 2612.118184] kvm: enabling virtualization on CPU3
[ 2612.159165] microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xba
[ 2612.159341] CPU3 is up
[ 2612.162067] ACPI: Waking up from system sleep state S4
[ 2612.195229] PM: noirq restore of devices complete after 32.832 msecs
[ 2612.195340] PM: early restore of devices complete after 0.090 msecs
[ 2612.313701] usb usb3: root hub lost power or was reset
[ 2612.313729] usb usb4: root hub lost power or was reset
[ 2612.313755] usb usb5: root hub lost power or was reset
[ 2612.313780] usb usb1: root hub lost power or was reset
[ 2612.314150] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 2612.314237] usb usb6: root hub lost power or was reset
[ 2612.314268] usb usb7: root hub lost power or was reset
[ 2612.314270] usb usb8: root hub lost power or was reset
[ 2612.314446] snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X
[ 2612.314574] i8042 kbd 00:0b: System wakeup disabled by ACPI
[ 2612.317669] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 2612.317710] usb usb2: root hub lost power or was reset
[ 2612.321604] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 2612.363371] switching from power state:
[ 2612.363373] ui class: none
[ 2612.363374] internal class: boot
[ 2612.363374] caps:
[ 2612.363375] uvd vclk: 0 dclk: 0
[ 2612.363376] power level 0 sclk: 50000 mclk: 15000 vddc: 950 vddci: 875 pcie gen: 2
[ 2612.363377] status: c b
[ 2612.363377] switching to power state:
[ 2612.363378] ui class: performance
[ 2612.363379] internal class: none
[ 2612.363379] caps:
[ 2612.363380] uvd vclk: 0 dclk: 0
[ 2612.363381] power level 0 sclk: 30000 mclk: 15000 vddc: 850 vddci: 875 pcie gen: 2
[ 2612.363382] power level 1 sclk: 50100 mclk: 125000 vddc: 950 vddci: 875 pcie gen: 2
[ 2612.363383] power level 2 sclk: 90000 mclk: 125000 vddc: 1090 vddci: 875 pcie gen: 2
[ 2612.363383] status: r
[ 2612.364940] [drm] probing gen 2 caps for device 8086:2e21 = 2212502/0
[ 2612.364942] [drm] PCIE gen 2 link speeds already enabled
[ 2612.368110] [drm] PCIE GART of 1024M enabled (table at 0x0000000000478000).
[ 2612.368282] radeon 0000:01:00.0: WB enabled
[ 2612.368285] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0xffff880223804c00
[ 2612.368286] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0xffff880223804c04
[ 2612.368287] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0xffff880223804c08
[ 2612.368288] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0xffff880223804c0c
[ 2612.368289] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0xffff880223804c10
[ 2612.368803] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90011035a18
[ 2612.529463] [drm] ring test on 0 succeeded in 1 usecs
[ 2612.529467] [drm] ring test on 1 succeeded in 1 usecs
[ 2612.529470] [drm] ring test on 2 succeeded in 1 usecs
[ 2612.529531] [drm] ring test on 3 succeeded in 2 usecs
[ 2612.529538] [drm] ring test on 4 succeeded in 1 usecs
[ 2612.628019] ata3: SATA link down (SStatus 0 SControl 300)
[ 2612.716665] [drm] ring test on 5 succeeded in 2 usecs
[ 2612.716668] [drm] UVD initialized successfully.
[ 2612.717954] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2612.717977] [drm] ib test on ring 1 succeeded in 0 usecs
[ 2612.718018] [drm] ib test on ring 2 succeeded in 0 usecs
[ 2612.718038] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2612.718056] [drm] ib test on ring 4 succeeded in 0 usecs
[ 2612.748028] usb 2-6: reset high-speed USB device number 3 using ehci-pci
[ 2612.780009] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2612.782009] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2612.783008] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2612.783017] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2612.784008] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2612.786493] ata5.00: configured for UDMA/100
[ 2612.792707] ata4.00: configured for UDMA/133
[ 2612.792731] sd 3:0:0:0: [sdc] Starting disk
[ 2612.794544] ata1.00: configured for UDMA/133
[ 2612.794570] sd 0:0:0:0: [sda] Starting disk
[ 2612.796703] ata6.00: configured for UDMA/133
[ 2612.796733] sd 5:0:0:0: [sdd] Starting disk
[ 2612.869974] [drm] ib test on ring 5 succeeded
[ 2612.886623] ata2.00: configured for UDMA/133
[ 2612.886971] sd 1:0:0:0: [sdb] Starting disk
[ 2612.964053] usb 8-1: reset full-speed USB device number 2 using uhci_hcd
[ 2613.162167] usb 2-6.3: reset high-speed USB device number 4 using ehci-pci
[ 2613.247841] PM: restore of devices complete after 934.225 msecs
[ 2613.268600] Restarting kernel threads ... done.
[ 2613.268797] PM: Basic memory bitmaps freed
[ 2613.268799] Restarting tasks ... done.
[ 2613.984118] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2616.078657] ATL1E 0000:02:00.0 eth0: NIC Link is Up <1000 Mbps Full Duplex>
[ 2616.078672] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3557.844340] perf samples too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 5615.946243] traps: daemon[5084] general protection ip:7f018c34743d sp:7fffb1cbd1f0 error:0 in libncursesw.so.5.9[7f018c31d000+38000]
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment