STM32 Toolchain on Ubuntu Instructions

gistfile1.txt

* Install GCC toolchain

tar xjvf gcc-arm-none-eabi-4_7-2013q1-20130313-linux.tar.bz2
sudo mv gcc-arm-none-eabi-4_7-2013q1-20130313-linux /opt/ARM
echo "PATH=$PATH:/opt/ARM/bin" >> ~/.bashrc
source ~/.bashrc
arm-none-eabi-gcc --version

* Build ST Link

sudo apt-get install autoconf libusb-1.0-0-dev

git clone git://github.com/texane/stlink.git
cd stlink
./autogen.sh
./configure
make

* Install ST Link

sudo mkdir /opt/stlink
cd /opt/stlink
sudo cp ~/src/stlink/st-flash .
sudo cp ~/src/stlink/st-util .
echo "PATH=$PATH:/opt/stlink" >> ~/.bashrc
source ~/.bashrc

* Grant Access to ST Link

sudo cp ~/src/stlink/49-stlinkv2.rules /etc/udev/rules.d
sudo udevadm control --reload-rules

* Build OpenOCD (For Debugging)

sudo apt-get install libtool texinfo

git clone git://git.code.sf.net/p/openocd/code openocd

./bootstrap
./configure --prefix=/usr --enable-maintainer-mode --enable-stlink
make 
sudo make install

* (Optional) Get Template for STM32F0 Discovery Boards

git clone https://github.com/szczys/stm32f0-discovery-basic-template
make
make program