torwag/gist:5976009c637c467458f750aa0ebf5e58

## gistfile1.txt
cat /etc/mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run.  Advanced users may wish to specify all system modules
# in this array.  For instance:
#     MODULES=(piix ide_disk reiserfs)
MODULES=()

# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image.  This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=(/usr/bin/btrfs)

# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way.  This is useful for config files.
FILES=()

# HOOKS
# This is the most important setting in this file.  The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
##   This setup specifies all modules in the MODULES setting above.
##   No raid, lvm2, or encrypted root is needed.
#    HOOKS=(base)
#
##   This setup will autodetect all modules for your system and should
##   work as a sane default
#    HOOKS=(base udev autodetect block filesystems)
#
##   This setup will generate a 'full' image which supports most systems.
##   No autodetection is done.
#    HOOKS=(base udev block filesystems)
#
##   This setup assembles a pata mdadm array with an encrypted root FS.
##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
#    HOOKS=(base udev block mdadm encrypt filesystems)
#
##   This setup loads an lvm2 volume group on a usb device.
#    HOOKS=(base udev block lvm2 filesystems)
#
##   NOTE: If you have /usr on a separate partition, you MUST include the
#    usr, fsck and shutdown hooks.
HOOKS=(base systemd autodetect keyboard sd-vconsole modconf block sd-encrypt openswap filesystems fsck)

# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"

# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=()


cat /etc/crypttab.initramfs
system     UUID=05d548c8-d8c8-47b1-9eef-5945ff395af4    none   luks
swap       UUID=ec03cb1f-b1d9-4dd7-b15a-1c8fa5e9cd12    /etc/luks.swap.key:UUID=05d548c8-d8c8-47b1-9eef-5945ff395af4


cat /etc/crypttab
[sudo] password for torsten:
# Configuration for encrypted block devices.
# See crypttab(5) for details.

# NOTE: Do not list your root (/) partition here, it must be set up
#       beforehand by the initramfs (/etc/mkinitcpio.conf).

# <name>       <device>                                     <password>              <options>
# home         UUID=b8ad5c18-f445-495d-9095-c9ec4f9d2f37    /etc/mypassword1
# data1        /dev/sda3                                    /etc/mypassword2
# data2        /dev/sda5                                    /etc/cryptfs.key
# vol          /dev/sdb7                                    none

swap       UUID=ec03cb1f-b1d9-4dd7-b15a-1c8fa5e9cd12    /etc/luks.swap.key
	cat /etc/mkinitcpio.conf
	# vim:set ft=sh
	# MODULES
	# The following modules are loaded before any boot hooks are
	# run. Advanced users may wish to specify all system modules
	# in this array. For instance:
	# MODULES=(piix ide_disk reiserfs)
	MODULES=()

	# BINARIES
	# This setting includes any additional binaries a given user may
	# wish into the CPIO image. This is run last, so it may be used to
	# override the actual binaries included by a given hook
	# BINARIES are dependency parsed, so you may safely ignore libraries
	BINARIES=(/usr/bin/btrfs)

	# FILES
	# This setting is similar to BINARIES above, however, files are added
	# as-is and are not parsed in any way. This is useful for config files.
	FILES=()

	# HOOKS
	# This is the most important setting in this file. The HOOKS control the
	# modules and scripts added to the image, and what happens at boot time.
	# Order is important, and it is recommended that you do not change the
	# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
	# help on a given hook.
	# 'base' is _required_ unless you know precisely what you are doing.
	# 'udev' is _required_ in order to automatically load modules
	# 'filesystems' is _required_ unless you specify your fs modules in MODULES
	# Examples:
	## This setup specifies all modules in the MODULES setting above.
	## No raid, lvm2, or encrypted root is needed.
	# HOOKS=(base)
	#
	## This setup will autodetect all modules for your system and should
	## work as a sane default
	# HOOKS=(base udev autodetect block filesystems)
	#
	## This setup will generate a 'full' image which supports most systems.
	## No autodetection is done.
	# HOOKS=(base udev block filesystems)
	#
	## This setup assembles a pata mdadm array with an encrypted root FS.
	## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
	# HOOKS=(base udev block mdadm encrypt filesystems)
	#
	## This setup loads an lvm2 volume group on a usb device.
	# HOOKS=(base udev block lvm2 filesystems)
	#
	## NOTE: If you have /usr on a separate partition, you MUST include the
	# usr, fsck and shutdown hooks.
	HOOKS=(base systemd autodetect keyboard sd-vconsole modconf block sd-encrypt openswap filesystems fsck)

	# COMPRESSION
	# Use this to compress the initramfs image. By default, gzip compression
	# is used. Use 'cat' to create an uncompressed image.
	#COMPRESSION="gzip"
	#COMPRESSION="bzip2"
	#COMPRESSION="lzma"
	#COMPRESSION="xz"
	#COMPRESSION="lzop"
	#COMPRESSION="lz4"

	# COMPRESSION_OPTIONS
	# Additional options for the compressor
	#COMPRESSION_OPTIONS=()



	cat /etc/crypttab.initramfs
	system UUID=05d548c8-d8c8-47b1-9eef-5945ff395af4 none luks
	swap UUID=ec03cb1f-b1d9-4dd7-b15a-1c8fa5e9cd12 /etc/luks.swap.key:UUID=05d548c8-d8c8-47b1-9eef-5945ff395af4


	cat /etc/crypttab
	[sudo] password for torsten:
	# Configuration for encrypted block devices.
	# See crypttab(5) for details.

	# NOTE: Do not list your root (/) partition here, it must be set up
	# beforehand by the initramfs (/etc/mkinitcpio.conf).

	# <name> <device> <password> <options>
	# home UUID=b8ad5c18-f445-495d-9095-c9ec4f9d2f37 /etc/mypassword1
	# data1 /dev/sda3 /etc/mypassword2
	# data2 /dev/sda5 /etc/cryptfs.key
	# vol /dev/sdb7 none

	swap UUID=ec03cb1f-b1d9-4dd7-b15a-1c8fa5e9cd12 /etc/luks.swap.key