totoroAKI

#include <msp430.h>     //MSP430F2619TPM
/* main.c */
//* GPIO pin definitions */////////////////////////////////////////
// LED
#define test_LED    0b00000001          // P1.0 test_LED
#define YELLOW_LED  0b00000001          // P4.0 YELLOW_LED [TB0]
#define RED_LED     0b00000010          // P4.1 RED_LED
#define BLUE_LED    0b00000100          // P4.2 BLUE_LED
#define GREEN_LED   0b00001000          // P4.3 GREEN_LED

totoroAKI

#include <msp430.h>     //MSP430F2619TPM
/**
 * main.c
 */
// 端子設定 /////////////////////////////////////////////////////////
// LED
#define test_LED    0b00000001          // P1.0 test_LED
#define RED_LED     0b00000010          // P4.1 RED_LED  [TB1]
#define BLUE_LED    0b00000100          // P4.2 BLUE_LED [TB2]
#define GREEN_LED   0b00001000          // P4.3 GREEN_LED[TB3]

totoroAKI

#include <msp430.h>     //MSP430F2619TPM
/**
 * main.c
 */
// 端子設定 /////////////////////////////////////////////////////////
// LED
#define test_LED    0b00000001          // P1.0 test_LED
#define RED_LED     0b00000010          // P4.1 RED_LED  [TB1]
#define BLUE_LED    0b00000100          // P4.2 BLUE_LED [TB2]
#define GREEN_LED   0b00001000          // P4.3 GREEN_LED[TB3]

totoroAKI

#include <msp430.h>     //MSP430F2619TPM
/*
 * main.c
 */
// 端子設定 /////////////////////////////////////////////////////////
#define test_LED     0b00000001          // P1.0 test_LED
#define RED_LED      0b00000001          // P6.0 RED_LED
#define BUTTON       0b00000010          // P6.1 BUTTON
#define BLUE_LED     0b00010000          // P6.4 BLUE_LED
#define GREEN_LED    0b10000000          // P6.7 GREEN_LED

totoroAKI

#include <msp430.h>     //MSP430F2619TPM
// 端子設定 //////////////
#define test_LED    0b00000001          // P1.0 test_LED

void setup() {
    WDTCTL = WDTPW + WDTHOLD;           // Stop WathcDog Timer,
    SVSCTL &= ~SVSFG;                   // 低電圧フラグを消去    Supply Voltage Supervisor
    SVSCTL = 0x60 + PORON;              // SVS POR enabled @ 2.5V  電圧低下検出．この電圧以下ではマイコンリセット．
    while(!(SVSCTL & SVSON));           // 電圧監視機能がONになるまで待機