Skip to content

Instantly share code, notes, and snippets.

@travispaul travispaul/bbb.md
Created May 1, 2017

Embed
What would you like to do?
Networking config for Beaglebone Black
# ifconfig
lo0: flags=0x8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33180
        inet6 ::1/128 flags 0x20<NODAD>
        inet6 fe80::1%lo0/64 flags 0x0 scopeid 0x1
        inet 127.0.0.1/8 flags 0x0
cpsw0: flags=0x8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        address: c8:a0:30:aa:65:c4
        media: Ethernet autoselect (100baseTX full-duplex)
        status: active
        inet6 fe80::caa0:30ff:feaa:65c4%cpsw0/64 flags 0x0 scopeid 0x2
        inet 192.168.1.105/24 broadcast 192.168.1.255 flags 0x0

# cat /etc/ifconfig.cpsw0
192.168.1.105 netmask 255.255.255.0

# grep defaultroute /etc/rc.conf
defaultroute=192.168.1.1

# grep dh /etc/rc.conf
dhcpcd=NO
dhclient=NO

# uname -pvm
NetBSD 7.99.70 (BEAGLEBONE) #0: Wed Apr 26 11:38:37 UTC 2017  mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/evbarm/compile/BEAGLEBONE evbarm earmv7hf
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.