mymill.ini

[EMC]
MACHINE = trentmill
DEBUG = 0

[DISPLAY]
DISPLAY = axis
EDITOR = gedit
POSITION_OFFSET = RELATIVE
POSITION_FEEDBACK = ACTUAL
ARCDIVISION = 64
GRIDS = 10mm 20mm 50mm 100mm 1in 2in 5in 10in
MAX_FEED_OVERRIDE = 1.2
MIN_SPINDLE_OVERRIDE = 0.5
MAX_SPINDLE_OVERRIDE = 1.2
DEFAULT_LINEAR_VELOCITY = 3.00
MIN_LINEAR_VELOCITY = 0
MAX_LINEAR_VELOCITY = 30.00
INTRO_GRAPHIC = linuxcnc.gif
INTRO_TIME = 5
PROGRAM_PREFIX = /home/marks/linuxcnc/nc_files
INCREMENTS = 5mm 1mm .5mm .1mm .05mm .01mm .005mm
PYVCP = custompanel.xml

[FILTER]
PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
PROGRAM_EXTENSION = .py Python Script
png = image-to-gcode
gif = image-to-gcode
jpg = image-to-gcode
py = python

[TASK]
TASK = milltask
CYCLE_TIME = 0.010

[RS274NGC]
PARAMETER_FILE = linuxcnc.var
SUBROUTINE_PATH = ./ROUTINES/
FEATURES = 12

[EMCMOT]
EMCMOT = motmod
COMM_TIMEOUT = 1.0
COMM_WAIT = 0.010
BASE_PERIOD = 100000
SERVO_PERIOD = 1000000

[HAL]
HALUI = halui
HALFILE = trentmill.hal
HALFILE = custom.hal
POSTGUI_HALFILE = custom_postgui.hal

[HALUI]
MDI_COMMAND = O <safe-go-home> 		CALL
MDI_COMMAND = O <z-probe> 	CALL
MDI_COMMAND = o100 call	
MDI_COMMAND = O <home-angle-zero> 	CALL	
MDI_COMMAND = O <home-angle-same> 	CALL

[TRAJ]
AXES = 3
COORDINATES = X Y Z
LINEAR_UNITS = mm
ANGULAR_UNITS = degree
CYCLE_TIME = 0.010
DEFAULT_VELOCITY = 3.00
MAX_VELOCITY = 30.00

[EMCIO]
EMCIO = io
CYCLE_TIME = 0.100
TOOL_TABLE = tool.tbl

[AXIS_0]
TYPE = LINEAR
HOME = 0.0
MAX_VELOCITY = 30.0
MAX_ACCELERATION = 30.0
STEPGEN_MAXACCEL = 37.5
SCALE = 160.0
FERROR = 1
MIN_FERROR = .25
MIN_LIMIT = -250.0
MAX_LIMIT = 250.0
HOME_OFFSET = 0.0
HOME_SEARCH_VEL = -1.27
HOME_LATCH_VEL = 0.381
HOME_IGNORE_LIMITS = YES
HOME_SEQUENCE = 1
HOME_IS_SHARED = 1

[AXIS_1]
TYPE = LINEAR
HOME = 0.0
MAX_VELOCITY = 30.0
MAX_ACCELERATION = 30.0
STEPGEN_MAXACCEL = 37.5
SCALE = 160.0
FERROR = 1
MIN_FERROR = .25
MIN_LIMIT = -250.0
MAX_LIMIT = 250.0
HOME_OFFSET = 0.0
HOME_SEARCH_VEL = -3.6
HOME_LATCH_VEL = 0.5
HOME_IGNORE_LIMITS = YES
HOME_SEQUENCE = 0
HOME_IS_SHARED = 1

[AXIS_2]
TYPE = LINEAR
HOME = 0.0
MAX_VELOCITY = 8.0
MAX_ACCELERATION = 8.0
STEPGEN_MAXACCEL = 10.0
SCALE = 160.0
FERROR = 1
MIN_FERROR = .25
MIN_LIMIT = -50.0
MAX_LIMIT = 50.0
#HOME_OFFSET = 0.0
#HOME_SEARCH_VEL = -1.6
#HOME_LATCH_VEL = 0.5
#HOME_IGNORE_LIMITS = YES
#HOME_SEQUENCE = 2
#HOME_IS_SHARED = 1