Esphome config for DS102 (3 Gang)

ds102-3.yaml

substitutions:
  device_name: your_device_name
  friendly_name: "Your Device Name"
  api_password: !secret api_password
  ota_password: !secret ota_password

esphome:
  name: ${device_name}
  platform: ESP8266
  board: esp01_1m

wifi:
  ssid: !secret wifi_name
  password: !secret wifi_pass
  fast_connect: True

# Enable logging
logger:

# Enable Home Assistant API
api:
  password: ${api_password}

ota:
  password: ${ota_password}


# Status LED
status_led:
  pin:
    number: GPIO0
    inverted: True

binary_sensor:
  - platform: gpio
    pin:
      number: GPIO12
      mode: INPUT_PULLUP
      inverted: True
    name: "${friendly_name} Button Left"
    on_press:
      - switch.toggle: relay_1
  - platform: gpio
    pin:
      number: GPIO3
      mode: INPUT_PULLUP
      inverted: True
    name: "${friendly_name} Button Middle"
    on_press:
      - switch.toggle: relay_2
  - platform: gpio
    pin:
      number: GPIO5
      mode: INPUT_PULLUP
      inverted: True
    name: "${friendly_name} Button Right"
    on_press:
      - switch.toggle: relay_3

switch:
  - platform: gpio
    name: "${friendly_name} Relay Left"
    pin: GPIO13
    id: relay_1
    on_turn_on:
    - light.turn_on: left_led_light
    on_turn_off:
    - light.turn_off: left_led_light
  - platform: gpio
    name: "${friendly_name} Relay Middle"
    pin: GPIO4
    id: relay_2
    on_turn_on:
    - light.turn_on: middle_led_light
    on_turn_off:
    - light.turn_off: middle_led_light
  - platform: gpio
    name: "${friendly_name} Relay Right"
    pin: GPIO15
    id: relay_3
    on_turn_on:
    - light.turn_on: right_led_light
    on_turn_off:
    - light.turn_off: right_led_light

output:
  - platform: esp8266_pwm
    id: left_led
    pin: GPIO16
    inverted: True
  - platform: esp8266_pwm
    id: middle_led
    pin: GPIO14
    inverted: True
  - platform: esp8266_pwm
    id: right_led
    pin: GPIO1
    inverted: True

light:
  - platform: monochromatic
    name: "${friendly_name} LED Left"
    output: left_led
    internal: true
    id: left_led_light
  - platform: monochromatic
    name: "${friendly_name} LED Middle"
    output: middle_led
    internal: true
    id: middle_led_light
  - platform: monochromatic
    name: "${friendly_name} LED Right"
    output: right_led
    internal: true
    id: right_led_light

hey,

I found your template while desperately trying to find a working config for the 2-gang version using Tasmota. I was able to find a GPIO mapping in the Tasmota docs but it always turns on the left LED only. Do you also have a working config for the 2 gang version I might apply to the Tasmota template?

Best regards,

Max

I found a solution in an open issue, for everyone coming here to find the answer: here

or the actual template:

{"NAME":"DS-102 2 Gang","GPIO":[158,57,0,17,22,18,0,0,0,21,56,255,0],"FLAG":0,"BASE":18}

Hey @faxemaxee,

great to hear you were successful. I only own the 1- and 3-gang variants, so I would not have been of much help anyway. Not surprised that the 2-gang template is erroneous though, there were problems with the other templates as well.

Cheers
felix