boot message of NetBSD/hp300 6.99.16 on HP9000/382

hp300-dmesg.txt

 Self-Test Mode
Copyright 1991,
Hewlett-Packard Company.
All Rights Reserved.

BOOTROM  Rev. 3.01  2 MAY 91
MC68040 Processor
Configuration EEPROM
Utility Chip at 41
HP-HIL.Keyboard
 RESET To Restart, SPACE clears input    Select System, type RETURN       ?
 Self-Test Mode
HP-IB
DMA-C0
 Self-Test Mode
RAM 25165482 Bytes
HP98624 (HP-IB) at 8
HP98644 (RS-232) at 9
HP PARALLEL at 12
HP98265 (SCSI S 32) at 14
HP98643 (LAN) at 21, AUI, 08000918D8D2
Bit Mapped Video at 132 (Console)
 Booting System


>> NetBSD/hp300 Primary Boot, Revision 1.18 (from NetBSD 5.99.64)
>> HP 9000/382 SPU
>> Enter "reset" to reset system.
Boot: [[[sd0a:]netbsd][-a][-c][-d][-s][-v][-q]] :- 
3328788+158476 [359440+237184]=0x3e5494
Start @ 0xfe803400 [1=0xfeb55620-0x3e5494]...
Entry point: 0xfe803400
bootinfo found at 0xfe802000
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.99.16 (GENERIC) #225: Fri Jan 11 20:33:13 JST 2013
        tsutsui@mirage:/usr/src/sys/arch/hp300/compile/GENERIC
HP 9000/382 (25MHz MC68040 CPU+MMU+FPU, 4k on-chip physical I/D caches)
total memory = 24564 KB
avail memory = 18960 KB
mainbus0 (root)
intio0 at mainbus0
rtc0 at intio0 addr 0x420000
frodo0 at intio0 addr 0x41c000 ipl 5
dnkbd at frodo0 offset 0x0 not configured
com1 at frodo0 offset 0x40: ns8250 or ns16450, no fifo
com2 at frodo0 offset 0x60: ns8250 or ns16450, no fifo
hil0 at intio0 addr 0x428000 ipl 1
nhpib1 at intio0 addr 0x478000 ipl 3: internal HP-IB
hpibbus1 at nhpib1
dma0 at intio0 addr 0x500000 ipl 1: 98620C, 2 channels, 32-bit DMA
dio0 at mainbus0
nhpib2 at dio0 scode 8 ipl 3: 98624A HP-IB
hpibbus2 at nhpib2
com0 at dio0 scode 9 ipl 5: ns16550a, working fifo
com0: console
internal parallel at dio0 scode 12 ipl 3 not configured
spc0 at dio0 scode 14 ipl 4: 98265A SCSI, 32-bit DMA, SCSI ID 7
scsibus0 at spc0: 8 targets, 8 luns per target
le0 at dio0 scode 21 ipl 5: address 08:00:09:18:d8:d2
le0: 8 receive buffers, 2 transmit buffers
gendiofb0 at dio0 scode 132 ipl 3: 1024x768x8 frame buffer
wsdisplay0 at gendiofb0 kbdmux 1
scsibus0: waiting 2 seconds for devices to settle...
hilkbd0 at hil0 code 1: 109-key keyboard, layout 2
wskbd0 at hilkbd0 mux 1
hilms0 at hil0 code 2: Mouse, 2 axes, 3 buttons
wsmouse0 at hilms0 mux 0
sd0 at scsibus0 target 0 lun 0: <FUJITSU, M2952S-512, 0147> disk fixed
sd0: 2291 MB, 5714 cyl, 5 head, 164 sec, 512 bytes/sect x 4693462 sectors
sd0: async, 8-bit transfers
sd1 at scsibus0 target 1 lun 0: <TEAC, FC-1     HF   07, RV A> disk removable
sd1(spc0:0:1:0): not ready, data = 00 00 00 00 04 00 00 00
sd1: drive offline
sd1: async, 8-bit transfers
sd1(spc0:0:1:0): illegal request, data = 00 00 00 00 20 00 00 00
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs