ESPHome with display SSD1306 OLED display

displaylabb.yaml

esphome:
  name: displaylabb
  platform: ESP8266
  board: d1_mini

wifi:
  ssid: 'meh'
  password: 'bbeeeh'
  ap:
    ssid: "DisplabbFallback Hotspot"
#    password: "rCdopOHEnjsj"

# Enable logging
logger:

# Enable Home Assistant API
api:

ota:

web_server:
  port: 80

time:
  - platform: sntp
    id: time_ntp
    timezone: Europe/Stockholm
    servers: 192.168.21.10

binary_sensor:
  - platform: homeassistant
    name: "PIR Framtisdan"
    internal: True
    entity_id: binary_sensor.shelly_19_switch 
    id: pir_framsidan
    on_press:
      then:
        - display.page.show: rorelse
        - component.update: my_display
        - delay: 5s
        - display.page.show_next: my_display
        - component.update: my_display
  - platform: status
    name: "Displaylabb Status"
  - platform: gpio
    pin:
      number: D3
      inverted: True
    name: "Displaylabb knapp 1"
    filters:
      - delayed_on: 10ms
      - delayed_off: 10ms
    on_press:
      then:
        - homeassistant.service:
            service: input_boolean.turn_on
            data:
              entity_id: input_boolean.enable_rpisurv
        - homeassistant.service:
            service: light.turn_on
            data:
              entity_id: light.lampa_ikea_rgb
              color_name: 'goldenrod'
    on_release:
      then:
        - homeassistant.service:
            service: input_boolean.turn_off
            data:
              entity_id: input_boolean.enable_rpisurv
        - homeassistant.service:
            service: light.turn_on
            data:
              entity_id: light.lampa_ikea_rgb
              color_name: 'navajowhite'
        - homeassistant.service:
            service: automation.trigger
            data:
              entity_id: automation.rpisurv_overview
sensor:
  - platform: wifi_signal
    name: "Displaylabb wifi signal"
    update_interval: 60s
  - platform: homeassistant
    id: office_temperature
    entity_id: sensor.kontoret_temperature
    internal: true
  - platform: homeassistant
    id: outside_temperature
    entity_id: sensor.auriolv2_4101_temp
    internal: true
  - platform: homeassistant
    id: rain
    entity_id: sensor.netatmo_regnmatare_sum_rain_24
    internal: true
  - platform: homeassistant
    id: octoprint_pct
    entity_id: sensor.octoprint_job_percentage
    internal: true

text_sensor:
  - platform: homeassistant
    entity_id: alarm_control_panel.verisure_alarm
    name: "Alarm State"
    id: alarm_state
    internal: true
  - platform: homeassistant
    entity_id: device_tracker.life360_helena
    name: "Where is Mamman"
    id: mamman
    internal: true
  - platform: homeassistant
    entity_id: variable.last_motion
    name: "Last motion indoor"
    id: last_motion_indoor
    internal: true
  - platform: homeassistant
    entity_id: variable.last_motion_outdoor
    name: "Last motion outdoor"
    id: last_motion_outdoor
    internal: true
  - platform: homeassistant
    entity_id: sensor.verisure_larmstatus
    name: "Verisure Larmstatus"
    id: verisure_larmstatus
    internal: true
    on_value:
      then:
      - lambda: |-
          if (id(verisure_larmstatus).state == "Armed Home On") {
            id(my_display).set_contrast(0.1); }
          else {
            id(my_display).set_contrast(1.0); }


font:
  - file: 'slkscr.ttf'
    id: font1
    size: 8
    glyphs: '!"%()+,-_.:°0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZÅÄÖ abcdefghijklmnopqrstuvwxyzåäöé'

  - file: 'bebas-neue-regular.ttf'
    id: font2
    size: 48

  - file: 'arial.ttf'
    id: font3
    size: 14
    glyphs: '!"%()+,-_.:°0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZÅÄÖ abcdefghijklmnopqrstuvwxyzåäöé'

  - file: 'bebas-neue-regular.ttf'
    id: font4
    size: 32

  - file: 'arial.ttf'
    id: font5
    size: 12
    glyphs: '!"%()+,-_.:°0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZÅÄÖ abcdefghijklmnopqrstuvwxyzåäöé'

  - file: "arial.ttf"
    id: tnr2
    size: 40
    glyphs: '!"%()+,-_.:°0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZÅÄÖ abcdefghijklmnopqrstuvwxyzåäöé'
  - file: 'materialdesignicons-webfont.ttf'
    id: icon_font
    size: 65
    glyphs:
      - "\U000F0594" # mdi-weather-night
      - "\U000F0599" # mdi-weather-sunny
      - "\U000F009E" # mdi-bell-ring-bell
      - "\U000F0D91" # mdi-motion

i2c:
  sda: D6
  scl: D7
  scan: True

display:
  - platform: ssd1306_i2c
    model: "SSD1306 128x64"
    id: "my_display"
    contrast: 80%
    address: 0x3C
    pages:
      - id: page1
        lambda: |-
          // Print "Sikvägen 11" in top center.
          // it.printf(64, 0, id(font1), TextAlign::TOP_CENTER, "Sikvagen 11");
          it.printf(64, 0, id(font1), TextAlign::TOP_CENTER, "Alarm State: %s", id(alarm_state).state.c_str());
          // printf("%s\n", someString.c_str());
          // Print time in HH:MM format
          it.strftime(0, 40, id(font4), TextAlign::BASELINE_LEFT, "%H:%M", id(time_ntp).now());
    
          // Print inside temperature (from homeassistant sensor)
          if (id(office_temperature).has_state()) {
            it.printf(127, 41, id(font3), TextAlign::BASELINE_RIGHT , "Kont %.1f°", id(office_temperature).state);
          }
    
          // Print outside temperature (from homeassistant sensor)
          if (id(outside_temperature).has_state()) {
            it.printf(127, 10, id(font3), TextAlign::TOP_RIGHT , "Out %.1f°", id(outside_temperature).state);
          }
    
          if (id(rain).has_state()) {
            it.printf(127, 60, id(font3), TextAlign::BASELINE_RIGHT, "Regn %.1fmm", id(rain).state);
          }
      - id: page2
        lambda: |-
          //it.strftime(0, 40, id(font4), TextAlign::BASELINE_LEFT, "%H:%M", id(time_ntp).now());

          if (id(last_motion_indoor).has_state()) {
            it.printf(0, 10, id(font5), TextAlign::BASELINE_LEFT , "I: %s", id(last_motion_indoor).state.c_str());
          }
          
          if (id(last_motion_outdoor).has_state()) {
            it.printf(0, 25, id(font5), TextAlign::BASELINE_LEFT , "O: %s", id(last_motion_outdoor).state.c_str());
          }
          if (id(octoprint_pct).has_state()) {
            it.printf(0, 40, id(font5), TextAlign::BASELINE_LEFT , "3D-printer: %.1f%%", id(octoprint_pct).state);
          }
          if (id(mamman).has_state()) {
            it.printf(0, 60, id(font3), TextAlign::BASELINE_LEFT, "H: %s", id(mamman).state.c_str());
          }
      - id: rorelse
        lambda: |-
            it.print(64, 0, id(icon_font), TextAlign::TOP_CENTER, "\U000F0D91");

interval:
  - interval: 11s
    then:
      - display.page.show: page1
      - component.update: my_display
      - delay: 5s
      - display.page.show: page2
      - component.update: my_display