ESPHome - SSD1306 display example

gistfile1.txt

esphome:
  name: display_hall
  platform: ESP8266
  board: nodemcuv2

wifi:
  manual_ip:
    static_ip: 192.168.XX.XX
    gateway: 192.168.XX.1
    subnet: 255.255.255.0
#  use_address: 192.168.XX.XX
  networks:
  # AP04 Garaget
  - ssid: !secret ssid
    password: !secret wifipwd
    bssid: FC:EC:DA:81:XX:XX
    priority: 4
  # AP03 Baksidan
  - ssid: !secret ssid
    password: !secret wifipwd
    bssid: F4:92:Bf:2D:XX:XX
    priority: 3
    # AP02 finentren
  - ssid: !secret ssid
    password: !secret wifipwd
    bssid: F0:9F:C2:34:XX:XX
    priority: 2
  # AP01 Hall OV
  - ssid: !secret ssid
    password: !secret wifipwd
    bssid: 80:2A:A8:D4:XX:XX
    priority: 1
  ap:
    ssid: "Disphall Fallback Hotspot"

captive_portal:

# Enable logging
logger:

# Enable Home Assistant API
api:

ota:

web_server:
  port: 80

time:
#  - platform: homeassistant
#    id: time
  - platform: sntp
    id: time_ntp
    timezone: Europe/Stockholm
    servers: 192.168.21.10

light:
  - platform: monochromatic
    name: "Hall LED"
    output: output_component1

output:
  - platform: esp8266_pwm
    id: output_component1
    pin: D6

binary_sensor:
  - platform: status
    name: "Display Hall Status"
  - platform: gpio
    pin:
      number: D1
      mode: INPUT_PULLUP
    name: "Hallknapp 1"
  - platform: gpio
    pin:
      number: D2
      mode: INPUT_PULLUP
    name: "Hallknapp 2"
  - platform: gpio
    pin: D5
    name: "Rörelsesensor (ESP) Groventre"
    device_class: motion
    filters:
      - delayed_off: 30s
    on_press:
      then:
        - lambda: id(my_display).set_brightness(1.0);
    on_release:
      then:
        - lambda: id(my_display).set_brightness(0.1);

sensor:
  - platform: wifi_signal
    name: "Display Hall wifi signal"
    update_interval: 60s
  - platform: bme280
    temperature:
      name: "Groventre (ESP) Temperature"
      oversampling: 16x
    pressure:
      name: "Groventre (ESP) Pressure"
    humidity:
      name: "Groventre (ESP) Humidity"
    address: 0x76
    update_interval: 10s
  - platform: homeassistant
    id: inside_temperature
    entity_id: sensor.hall_ov_esp_temperature
    internal: true
  - platform: homeassistant
    id: outside_temperature
    entity_id: sensor.snitttemp_ute_min_max
    internal: true
  - platform: homeassistant
    id: inside_hum
    entity_id: sensor.luftfuktighet_avr_inne
    internal: true
  - platform: homeassistant
    id: forrad_temperature
    entity_id: sensor.forrad_temperature
    internal: true
  - platform: homeassistant
    id: forrad_hum
    entity_id: sensor.forrad_humidity
    internal: true
  - platform: homeassistant
    id: gte_batt_level
    entity_id: sensor.my_passat_gte_battery_level
    internal: true
  - platform: homeassistant
    id: gte_fuel_level
    entity_id: sensor.my_passat_gte_fuel_level
    internal: true
  - platform: homeassistant
    id: gte_comb_range
    entity_id: sensor.my_passat_gte_combined_range
    internal: true

text_sensor:
  - platform: homeassistant
    entity_id: alarm_control_panel.my_alarm
    name: "Alarm State"
    id: alarm_state
    internal: true
  - platform: homeassistant
    entity_id: device_tracker.life360_torbjorn
    name: "Where is Pappan"
    id: pappan
    internal: true
  - platform: homeassistant
    entity_id: device_tracker.life360_helena
    name: "Where is Mamman"
    id: mamman
    internal: true


font:
  - file: 'slkscr.ttf'
    id: font1
    size: 8

  - file: 'bebas-neue-regular.ttf'
    id: font2
    size: 48

  - file: 'arial.ttf'
    id: font3
    size: 14

  - file: 'bebas-neue-regular.ttf'
    id: font4
    size: 32

i2c:
  sda: D3
  scl: D4
  scan: True

display:
  - platform: ssd1306_i2c
    model: "SH1106 128x64"
    id: "my_display"
    reset_pin: D0
    address: 0x3C
    pages:
      - id: page1
        lambda: |-
          // Print "Sikvägen 11" in top center.
          // it.printf(64, 0, id(font1), TextAlign::TOP_CENTER, "Alarmsystem");
          it.printf(64, 0, id(font1), TextAlign::TOP_CENTER, "Alarm State: %s", id(alarm_state).state.c_str());
          // printf("%s\n", someString.c_str());
          // Print time in HH:MM format
          it.strftime(0, 40, id(font4), TextAlign::BASELINE_LEFT, "%H:%M", id(time_ntp).now());
    
          // Print inside temperature (from homeassistant sensor)
          if (id(inside_temperature).has_state()) {
            it.printf(127, 44, id(font3), TextAlign::BASELINE_RIGHT , "In %.1f°", id(inside_temperature).state);
          }
    
          // Print outside temperature (from homeassistant sensor)
          if (id(outside_temperature).has_state()) {
            it.printf(127, 10, id(font3), TextAlign::TOP_RIGHT , "Out %.1f°", id(outside_temperature).state);
          }
    
          if (id(inside_hum).has_state()) {
            it.printf(127, 64, id(font3), TextAlign::BASELINE_RIGHT , "H In %.1f%%", id(inside_hum).state);
          }
      - id: page2
        lambda: |-
          it.printf(64, 0, id(font1), TextAlign::TOP_CENTER, "Alarm State: %s", id(alarm_state).state.c_str());
          //it.strftime(0, 40, id(font4), TextAlign::BASELINE_LEFT, "%H:%M", id(time_ntp).now());
          if (id(forrad_temperature).has_state()) {
            it.printf(127, 43, id(font3), TextAlign::BASELINE_RIGHT , "Forrad temp %.1f°", id(forrad_temperature).state);
          }
          if (id(forrad_hum).has_state()) {
            it.printf(127, 10, id(font3), TextAlign::TOP_RIGHT , "Forrad hum %.1f°", id(forrad_hum).state);
          }
          if (id(outside_temperature).has_state()) {
            it.printf(127, 63, id(font3), TextAlign::BASELINE_RIGHT , "Outdoor temp %.1f°", id(outside_temperature).state);
          }
      - id: page3
        lambda: |-
          it.printf(64, 0, id(font1), TextAlign::TOP_CENTER, "Alarm State: %s", id(alarm_state).state.c_str());
          if (id(gte_batt_level).has_state()) {
            it.printf(127, 43, id(font3), TextAlign::BASELINE_RIGHT , "GTE Batt %.1f%%", id(gte_batt_level).state);
          }
    
          if (id(gte_fuel_level).has_state()) {
            it.printf(127, 10, id(font3), TextAlign::TOP_RIGHT , "GTE Fuel %.1f%%", id(gte_fuel_level).state);
          }
          if (id(gte_comb_range).has_state()) {
            it.printf(127, 63, id(font3), TextAlign::BASELINE_RIGHT , "GTE Rng %.1f KM", id(gte_comb_range).state);
          }
      - id: page4
        lambda: |-
          it.print(64, 0, id(font1), TextAlign::TOP_CENTER, "Where is the family");
          if (id(pappan).has_state()) {
            it.printf(127, 62, id(font3), TextAlign::BASELINE_RIGHT, "T: %s", id(pappan).state.c_str());
          }
          if (id(mamman).has_state()) {
            it.printf(127, 42, id(font3), TextAlign::BASELINE_RIGHT, "H: %s", id(mamman).state.c_str());
          }
    
interval:
  - interval: 5s
    then:
      - display.page.show_next: my_display
      - component.update: my_display