Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
RSX-11M-PLUS on DEC PDP-11/24 with DECnet, BASIC PLUS 2, DIBOL, PASCAL, C AND COBOL PART 5 | Wrapping Up - Startup Scripts etc. -
[openvms@sanyalnet-cloud-vps2 pdp11]$ ###################
[openvms@sanyalnet-cloud-vps2 pdp11]$ # BASED ON THE FABULOUS INSTRUCTIONS AT http://pdp2011.sytse.net/wordpress/install-5/
[openvms@sanyalnet-cloud-vps2 pdp11]$ ###################
[openvms@sanyalnet-cloud-vps2 pdp11]$
[openvms@sanyalnet-cloud-vps2 pdp11]$ # ---------------------------------
[openvms@sanyalnet-cloud-vps2 pdp11]$ # HERE IS PDP11.INI initialization file for SIMH PDP11
[openvms@sanyalnet-cloud-vps2 pdp11]$ # ---------------------------------
[openvms@sanyalnet-cloud-vps2 pdp11]$ cat pdp11.ini
set cpu 11/70
set cpu 2m
set lpt disable
set ptr disable
set ptp disable
set dz disable
set rk disable
set rl disable
set hk disable
set rx disable
set tq disable
set cr disable
set xq disable
; Network Adapter
set xu enable
attach xu tap:tap2
;
set rq disable
set tm disable
;boot disk
set rp0 rp06
att rp0 rsx11m6.dsk
;
set rp1 disable
set rp2 disable
set rp3 disable
set rp4 disable
set rp5 disable
set rp6 disable
set rp7 disable
set ts disable
;
boot rp0
[openvms@sanyalnet-cloud-vps2 pdp11]$ # ---------------------------------
[openvms@sanyalnet-cloud-vps2 pdp11]$ sudo ./pdp11
[sudo] password for openvms:
PDP-11 simulator V4.0-0 Beta git commit id: c9af9a70
Disabling XQ
libpcap version 1.5.3
Eth: opened OS device tap2
sim> b rp0
RSX-11M-PLUS V4.6 BL87 1024.KW System:"JUICHI"
>RED DB:=SY:
>RED DB:=LB:
>RED DB:=SP:
>MOU DB0:"RSX11MPBL87"
>@DB:[1,2]STARTUP
>; PLEASE NOTE
>;
>; If you have not yet read the system release notes, please do so
>; now before attempting to perform a SYSGEN or to utilize the new
>; features of this system.
>;
>;
>* Please enter time and date (HH:MM DD-MMM-YYYY) [S]: 19:50 20-nov-2016
>TIME 19:50 20-nov-2016
>ACS SY:/BLKS=1024.
>CON ONLINE ALL
>ELI /LOG/LIM
>CLI /INIT=DCL/CTRLC/DPR="<15><12>/$ /"
>INS LB:[1,1]RMSRESAB.TSK/RON=YES/PAR=GEN
>INS LB:[1,1]RMSLBL.TSK/RON=YES/PAR=GEN
>INS LB:[1,1]RMSLBM.TSK/RON=YES/PAR=GEN
>INS $QMGCLI
>INS $QMGCLI/TASK=...PRI
>INS $QMGCLI/TASK=...SUB
>QUE /START:QMG
>INS $QMGPRT/TASK=PRT.../SLV=NO
>QUE LP0:/CR/NM
>START/ACCOUNTING
>CON ESTAT LP0:
>QUE BAP0:/BATCH
>QUE BAP0:/AS:BATCH
>@ <EOF>
>
>
>
>ins $edt
>bye
Have a Good Evening
20-NOV-16 19:51 TT0: logged off JUICHI
>
>
>
>[B
MCR -- Illegal function
>
>
>hello system
Password:
RSX-11M-PLUS V4.6 BL87 [1,54] System JUICHI
20-NOV-16 19:55 Logged on Terminal TT0: as SYS1
Good Evening
*****************************************************************
* *
* Welcome to RSX-11M-PLUS *
* *
* Version 4.6 Base level 87 *
* This is file LB:[1,2]LOGIN.TXT *
* *
*****************************************************************
Last interactive login on Sunday, November 20, 2016 19:18:41 (TT0:)
>
>
>edt [1,2]startup.cmd
1 .;
*169
169 .EXIT
*
[EOB]
*[D
^
Unexpected characters after end of command
*[D
^
Unexpected characters after end of command
*169
169 .EXIT
*ins
ins lb:[1,1]dblrsx/par=gen
ins $dibol83
ins $dblmsgmgr
ins $dblsort1
ins $dblsort2
ins $dblmnugen/task=b&mnu
dcl run msgmgr /delay=1s
ins lb:[3,54]f77.tsk/task=b&f77
ins lb:[3,54]pdp11c.tsk/task=b&ccc
ins lb:[1,1]pdppas.tsk/task=b&pas
INS LB:[1,1]BP2RES/RON=YES/PAR=GEN
ins lb:[1,54]bp2ic2.tsk/task=b&bp2/inc=1000
ins lb:[6,3]cobol.tsk
ins lb:[6,3]cblmrg.tsk
ins lb:[6,3]refrmt.tsk
.sett $cex
.sett $dec
.sett $nns
asn db0:=xx:
.setf $lat
@[5,1]netins
ins $edt
ins $tkb
^Z
169 .EXIT
*167
167
*166
166 @LB:[1,2]QMGSTOP.CMD
*179
[EOB]
*ex
DB0:[1,2]STARTUP.CMD;2 196 lines
>type DB0:[1,2]STARTUP.CMD
.;
.; STARTUP.CMD for RSX-11M-PLUS distribution kits.
.;
.;
.; This file is a prototype startup file distributed as part of the
.; RSX-11M-PLUS distribution. You should customize this file to meet
.; the needs of your particular installation. For example, application
.; tasks may be installed here, the CUSPS from LIBUIC ([3,54] on the
.; distribution kit) may be installed if not already installed in the
.; saved system image, etc.
.;
; PLEASE NOTE
;
; If you have not yet read the system release notes, please do so
; now before attempting to perform a SYSGEN or to utilize the new
; features of this system.
;
.IF <SYSUIC> NE "[2,54]" .GOTO NONEWS
;
; In order to start the SYSGEN process, type:
;
; >@SYSGEN
;
; When SYSGEN has completed and your generated system is
; running, you may wish to edit several supplied prototype
; command and text files to suit your system and application:
;
; File Purpose
; ---- -------
; [0,0]RSX11.SYS An account/password file
; This file does contain privileged accounts.
;
; [1,2]STARTUP.CMD (This file) Invoked at bootstrap time to
; control bringing up the system.
;
; [1,2]QMGSTART.CMD Invoked by STARTUP to start up the Queue
; Manager and spooling system.
;
; [1,2]SHUTUP.CMD Invoked by SHUTUP when taking down the system
; to perform system dependent shutdown tasks.
;
; [1,2]QMGSTOP.CMD Invoked by SHUTUP to stop the Queue Manager
; and spooling system.
;
; [1,2]LOGIN.TXT Displayed on user's terminal when logging in.
;
; [1,2]BATCH.TXT Displayed at the beginning of each batch log
; file.
;
.NONEWS:
.ENABLE SUBSTITUTION
.ENABLE GLOBAL
.; Determine terminal type
.; Output a blank line so that if the terminal does not recognize the
.; SET /INQUIRE escape sequence, the garbage characters that it prints
.; will not overprint the last command.
;
.ENABLE QUIET
SET /INQUIRE=TI:
.DISABLE QUIET
.IF <EXSTAT> EQ <SUCCES> .GOTO NON020
;
; Please ignore any random characters that may have printed on your
; terminal just now. They came from a SET /INQUIRE=TI: command.
; Evidently your terminal does not recognize escape sequences.
; This will not affect the running of this command file.
;
.NON020:.; Continue
.ENABLE QUIET
ASN LB:=WK:
.DISABLE QUIET
.; Request the correct time of day.
.IFDF $TIME .GOTO SETIME
.; See if the system has a known TOY clock
.SETF $TOY
.PARSE <FMASK> "," FMX FMX FMX FMX HFMSK FMX
.SETN TEMPN 'HFMSK'
.SETN TEMPN TEMPN&1400
.SETS TEMPS "(HH:MM DD-MMM-YYYY)"
.IF TEMPN EQ 0 .GOTO ASKTIM
.ENABLE QUIET
TIM /SYNC
.DISABLE QUIET
.IF <EXSTAT> NE 1 .GOTO ASKTIM
.PARSE <TIME> ":" HH MM SS
.SETS TEMPS "(Default:'<DATE4>' 'HH':'MM')"
.SETT $TOY
.ASKTIM:
.ASKS $TIME Please enter time and date 'TEMPS'
.IFT $TOY .IF <STRLEN> EQ 0 .GOTO SETIME
.IF <STRLEN> < 12 .GOTO ASKTIM
TIME '$TIME'
.IF <EXSTAT> <> <SUCCES> .GOTO ASKTIM
.SETIME:
.; Allocate system controlled checkpoint space
.IFNDF $ACSSY ACS SY:/BLKS=1024.
.; Bring on line all configured devices
.IFDF $CONAL .GOTO NOCON
CON ONLINE ALL
.NOCON:
.; Start the system error logger
ELI /LOG/LIM
.; Create CLI for DIGITAL Command Language (DCL)
.IFNINS ...DCL INS $DCL/CLI=YES/TASK=...DCL/PRI=160.
CLI /INIT=DCL/CTRLC/DPR="<15><12>/$ /"
.; Install RMS tasks
.;
.; Install all segments of the RMS segmented library
INS LB:[1,1]RMSRESAB.TSK/RON=YES/PAR=GEN
INS LB:[1,1]RMSLBL.TSK/RON=YES/PAR=GEN
INS LB:[1,1]RMSLBM.TSK/RON=YES/PAR=GEN
.; If you wish to use the RMSDAP resident library to access RMS files
.; on remote nodes, use the next command (remove the comment delimiters):
.;
.; INS LB:[1,1]DAPRES.TSK/RON=YES/PAR=GEN
.;
.; The following RMS Utilities may be individually installed as needed
.; (by removing the comment delimiters):
.;
.; INS LB:[3,54]RMSDES.TSK
.; INS LB:[3,54]RMSDEF.TSK
.; INS LB:[3,54]RMSBCK.TSK
.; INS LB:[3,54]RMSRST.TSK
.; INS LB:[3,54]RMSCNV.TSK
.; INS LB:[3,54]RMSIFL.TSK
.; INS LB:[3,54]RMSDSP.TSK
.; Nest to the prototype Queue Manager startup file.
@LB:[1,2]QMGSTART.CMD
.IF <EXSTAT> = <SUCCES> .GOTO DONE
.; An error was encountered in starting the Queue Manager and
.; associated tasks. Nest to the Queue Manager stop proceedure
.; to back out of the startup.
@LB:[1,2]QMGSTOP.CMD
.DONE:
ins lb:[1,1]dblrsx/par=gen
ins $dibol83
ins $dblmsgmgr
ins $dblsort1
ins $dblsort2
ins $dblmnugen/task=b&mnu
dcl run msgmgr /delay=1s
ins lb:[3,54]f77.tsk/task=b&f77
ins lb:[3,54]pdp11c.tsk/task=b&ccc
ins lb:[1,1]pdppas.tsk/task=b&pas
INS LB:[1,1]BP2RES/RON=YES/PAR=GEN
ins lb:[1,54]bp2ic2.tsk/task=b&bp2/inc=1000
ins lb:[6,3]cobol.tsk
ins lb:[6,3]cblmrg.tsk
ins lb:[6,3]refrmt.tsk
.sett $cex
.sett $dec
.sett $nns
asn db0:=xx:
.setf $lat
@[5,1]netins
ins $edt
ins $tkb
.EXIT
>edt [5,1]netins.cmd
1 .;
*f"netxxu"
*f "netxxu"
*f bnetxxub
^
Unexpected characters after end of command
*f "netxxu"
String was not found
*f "netxxu"
String was not found
*q
^
Unrecognized command
*quit
>[A
MCR -- Illegal function
[B
MCR -- Illegal function
>
>
>edt [5,1]netins.cmd
1 .;
*f"netxxu"
*t
75 .ASKN [1:377:'NETXX1'] NETXXU What is the network UIC group cod
e
*s/./;/
75 ;ASKN [1:377:'NETXX1'] NETXXU What is the network UIC group cod
e
1 substitution
*
76 .ENABLE QUIET
*[D
^
Unexpected characters after end of command
*[Dt
^
Unexpected characters after end of command
*t
76 .ENABLE QUIET
*t
76 .ENABLE QUIET
*75
75 ;ASKN [1:377:'NETXX1'] NETXXU What is the network UIC group cod
e
*
76 .ENABLE QUIET
*
77 SET /NETUIC=['NETXXU',54]
*75
75 ;ASKN [1:377:'NETXX1'] NETXXU What is the network UIC group cod
e
*ins
.setn netxxu 5
^Z
75 ;ASKN [1:377:'NETXX1'] NETXXU What is the network UIC group cod
e
*
76 .ENABLE QUIET
*ex
DB0:[5,1]NETINS.CMD;2 246 lines
>
>type DB0:[5,1]NETINS.CMD
.;
.; NETINS.CMD - Network Installation Command File
.;
.; This command file installs the network tasks you have
.; selected during NETGEN. If the logical device XX: is
.; already defined, it is assumed to be the disk on which the
.; network tasks reside.
.;
.; The following symbols may be defined on entry.
.;
.; $CEX If true, the CEX System will be loaded.
.; If false, it will not be loaded.
.; If not defined, the user will be asked.
.;
.; $xxx If true, the CEX Product will be started.
.; If false, it will not be started.
.; If not defined, the user will be asked.
.;
.; The "xxx" is the NETGEN id for the CEX Product
.; (example: $DEC for the DECnet Product and $PSI
.; for the PSI Product).
.;
.; The following symbols will be defined on exit.
.;
.; <EXSTAT> = 1 if CEX System loaded, 0 if not.
.;
.ENABLE GLOBAL
.ENABLE SUBSTITUTION
.DISABLE LOWERCASE
.SETS NETUIC <UIC>
.SETS NETSUC <SYSUIC>
.SETF NETASN
.SETF DCLI
.IF <CLI> NE "DCL" .GOTO NET05
.SETT DCLI
.ENABLE QUIET
SET TERM MCR
.DISABLE QUIET
.NET05:
.TESTFILE SY:
.PARSE <FILSPC> ":" NETXXS NETXXD
.SETS NETXXD ""
.IFNDF $CEX .ASK $CEX Do you want to install and load the CEX system
.IFNDF $DEC .ASK $DEC Do you want to install and start DECnet
.IFNDF $NNS .ASK $NNS Do you want to install and start NNS
.IFNDF $LAT .ASK $LAT Do you want to install and start LAT
.IFT $CEX .GOTO NET10
.IFT $DEC .GOTO NET10
.IFNDF $LAT .SETF $LAT
.IFT $LAT .GOTO NET10
.IFT $NNS .GOTO NET10
.EXIT 0
.NET10:
.TESTFILE XX:[0,0]000000.DIR
.IF <FILERR> EQ 1 .GOTO NET15
.NET12:
.ASKS NETXXD On what device are the network tasks [D='NETXXS':]
.IF NETXXD EQ "" .SETS NETXXD "'NETXXS':"
.PARSE NETXXD ":" NETXXD T
.TEST NETXXD
.IFF <ALPHAN> .GOTO NET12
.SETS NETXXD "'NETXXD':"
.SETT NETASN
.ENABLE QUIET
.IFT NETASN ASN 'NETXXD'=XX:
.DISABLE QUIET
.GOTO NET10
.NET15:
.TESTFILE XX:'<NETUIC>'AUX.STB
.IF <FILERR> EQ 1 .GOTO NET20
.PARSE <UIC> "[," NETXX0 NETXX1 NETXX0
.setn netxxu 5
;ASKN [1:377:'NETXX1'] NETXXU What is the network UIC group code
.ENABLE QUIET
SET /NETUIC=['NETXXU',54]
.DISABLE QUIET
.GOTO NET15
.NET20: .SETF NETLOA
.IFNINS LOA .SETT NETLOA
.IFNINS LOA INS $LOA
.;
.; Load the NN: driver before installing tasks for LUN assignments.
.;
.IFF $CEX .IFF $DEC .IFF $NNS .GOTO NET30
ASN XX:=LB:
SET /SYSUIC='<NETUIC>'
.IFNLOA NN: LOA NN:/VEC
.TESTDEVICE NN:
.TEST <EXSTRI> "ONL"
.IF <STRLEN> EQ 0 CON ONL NN:
SET /SYSUIC='NETSUC'
ASN =LB:
.IFT $NNS .IFNINS ...SCP INS XX:'<NETUIC>'SCPRES
.IFT $NNS .IFNACT NT.NNS .IFNINS NT$NNS INS XX:'<NETUIC>'NNS
.IFT $NNS .IFNINS ...NNC ;INS XX:'<NETUIC>'NNCRES
.IFT $NNS .IFINS ...SCP .IFNACT NT.NNS SCP START FROM XX:'<NETUIC>' SIL
(I)
.NET30:
.;
.; Install all appropriate tasks
.;
.IFF $CEX .GOTO NETX1
INS XX:'<NETUIC>'NTINIT
INS XX:'<NETUIC>'NTL
INS XX:'<NETUIC>'MLD
INS XX:'<NETUIC>'EVC
INS XX:'<NETUIC>'NCPRES
; INS XX:'<NETUIC>'CFERES
; INS XX:'<NETUIC>'VNP
INS XX:'<NETUIC>'NMVACP
SET /SYSUIC='<NETUIC>'
ASN XX:=LB:
.IFNLOA NM: LOA NM:/HIGH/VEC
.TESTDEVICE NM:
.TEST <EXSTRI> "ONL"
.IF <STRLEN> EQ 0 CON ONL NM:
ASN =LB:
SET /SYSUIC='NETSUC'
INS XX:'<NETUIC>'LOO
.IFNINS LOO... INS XX:'<NETUIC>'LOO/TASK=LOO...
INS XX:'<NETUIC>'EVFRES
.NETX1:
.IFF $DEC .GOTO DECX1
INS XX:'<NETUIC>'NETACP
.TESTFILE XX:'<NETUIC>'NGACP.TSK
.IF <FILERR> EQ 1 INS XX:'<NETUIC>'NGACP
INS XX:'<NETUIC>'NICE
INS XX:'<NETUIC>'EVR
INS XX:'<NETUIC>'NTD
INS XX:'<NETUIC>'NTDEMO
INS XX:'<NETUIC>'LIN
INS XX:'<NETUIC>'MIR
INS XX:'<NETUIC>'NVP
INS XX:'<NETUIC>'NFTRES
INS XX:'<NETUIC>'FTSRES
INS XX:'<NETUIC>'FTSDEQRES
SET /UIC=[1,1]
.TESTFILE LB:[0,0]001004.DIR
.IF <FILERR> NE 1 UFD LB:[1,4]
.IFNINS ...PIP .SETT DECPIP
.IFDF DECPIP INS $PIP
PIP LB:[0,0]001004.DIR/PR:0
.IFDF DECPIP REM ...PIP
SET /UIC='NETUIC'
.IFACT QMG... QUE FTSQUE:/CR/NM
.IFACT QMG... QUE FTSDEQ:/SP/EX
.IFACT QMG... QUE FTSDEQ:/AS:FTSQUE
.SETT L1
.SETF NORMS
.SETF RNGRMS
.TESTPARTITION RMSRES
.TEST <EXSTRI> ",NSP,"
.IF <STRLEN> NE 0 .SETT NORMS
.SETS T3 "1"
.IFF NORMS .PARSE <EXSTRI> ",,," T1 T2 T3 T4
.SETN N3 'T3'
.IFT NORMS ;**WARNING** FAL can not be installed because RMSRES is not i
nstal
led
.IF N3 LT 100 .SETT RNGRMS
.IFF NORMS .IFT RNGRMS ;**WARNING** FAL can not be installed because the
wron
g RMSRES is installed
.IFT NORMS .SETF L1
.IFT RNGRMS .SETF L1
.SETT L2
.SETT L3
.TESTPARTITION RMSLBL
.TEST <EXSTRI> ",NSP,"
.IF <STRLEN> NE 0 .SETF L2
.TESTPARTITION RMSLBM
.TEST <EXSTRI> ",NSP,"
.IF <STRLEN> NE 0 .SETF L2
.TESTPARTITION RMSLBA
.TEST <EXSTRI> ",NSP,"
.IF <STRLEN> NE 0 .SETF L3
.TESTPARTITION RMSLBB
.TEST <EXSTRI> ",NSP,"
.IF <STRLEN> NE 0 .SETF L3
.TESTPARTITION RMSLBC
.TEST <EXSTRI> ",NSP,"
.IF <STRLEN> NE 0 .SETF L3
.TESTPARTITION RMSLBD
.TEST <EXSTRI> ",NSP,"
.IF <STRLEN> NE 0 .SETF L3
.TESTPARTITION RMSLBE
.TEST <EXSTRI> ",NSP,"
.IF <STRLEN> NE 0 .SETF L3
.TESTPARTITION RMSLBF
.TEST <EXSTRI> ",NSP,"
.IF <STRLEN> NE 0 .SETF L3
.IFF L2 .IFF L3 ;**WARNING** FAL cannot be installed -
.IFF L2 .IFF L3 ; Either RMSLBL and RMSLBM
.IFF L2 .IFF L3 ; or RMSLBA,RMSLBB,RMSLBC,RMSLBD,RMSLBE,and
RMSLBF
.IFF L2 .IFF L3 ; must be installed
.IFF L2 .IFF L3 .SETF L1
.IFT L1 INS XX:'<NETUIC>'FAL
.IFT L1 INS XX:'<NETUIC>'FALLOG
INS XX:'<NETUIC>'MCM
INS XX:'<NETUIC>'RMT
INS XX:'<NETUIC>'RMTACP/CLI=YES
CLI /INIT=RMTACP/NULL/RESTRICT/CPR="<15><12>/RMT>/"
SET /SYSUIC='<NETUIC>'
ASN XX:=LB:
.IFNLOA HT: LOA HT:/HIGH/VEC
SET /SYSUIC='NETSUC'
ASN =LB:
INS XX:'<NETUIC>'RMHACP
INS XX:'<NETUIC>'NCTCTL
INS XX:'<NETUIC>'TLKRES
INS XX:'<NETUIC>'LSN
INS XX:'<NETUIC>'PHONE/TASK=...PHO
INS XX:'<NETUIC>'PHONE/TASK=PHO$$$
.IFNINS ...LCP .IFT $LAT INS XX:'<NETUIC>'LCP
INS XX:'<NETUIC>'TCL
.DECX1:
.;
.; Load the CEX System, start CEX Products
.;
.IFNDF $LAT .SETF $LAT
.IFT NETLOA REM ...LOA
.TESTFILE XX:[005,001]NETRND.CMD
.IF <FILERR> NE 1 .GOTO NETNN0
.IFF $NNS .GOTO NETNN0
.SETF NETCFE
.IFNINS ...CFE .SETT NETCFE
.IFT NETCFE INS XX:'<NETUIC>'CFERES
.SETF NETPIP
.IFNINS ...PIP .SETT NETPIP
.IFT NETPIP INS $PIP
CFE @XX:[005,001]NETRND
PIP XX:[005,001]NETRND.COM=XX:[005,001]NETRND.CMD/RE
.IFT NETCFE REM ...CFE
.IFT NETPIP REM ...PIP
.NETNN0:
.IFT $CEX NCP SET SYS
.IFT NETASN .IFF $LAT ASN =XX:
.IFT $DEC NCP SET EXE STA ON
.IFNINS ...LCP .IFT $LAT INS XX:'<NETUIC>'LCP
.IFT NETASN .IFT $LAT ASN =XX:
.IFT $LAT LCP START
.ENABLE QUIET
.IFT DCLI SET /DCL=TI:
.DISABLE QUIET
>
>
>
>
>run $shutup
RSX-11M-PLUS Shut down program
Enter minutes to wait before shutdown: 0
Reason for shutdown (<CR> for none):
OK to shutdown? [Y/N]: Y
All further logins are disabled
20-NOV-16 20:04 System is now shutting down -- JUICHI
QUE /STO:QMG
>
STOP/ACCOUNTING SHUTUP
20:04:51 SYSLOG -- 47. Exiting
>
@LB:[1,2]SHUTUP
>VCP DISCONNECT /ALL
>@ <EOF>
>
ELI /NOLOG
>
ACS DB0:/BLKS=0.
ACS -- Checkpoint file now inactive
>
DMO DB0:/DEV/LOCK=V
DMO -- System disk being dismounted
DMO -- SYSTEM dismounted from DB0: *** Final dismount initiated ***
20:04:52 *** DB0: -- Dismount complete
>
SHUTUP operation complete
HALT instruction, PC: 126130 (CLRB @#177776)
sim> exit
Goodbye
Eth: closed tap2
[openvms@sanyalnet-cloud-vps2 pdp11]$ tar cvzf install-5-finish-up-complete.tgz * --exclude="*tgz"
basic_plus_2_rsx_v2_5.tpc
basic_plus_2_rsx_v2_5.zip
basic_plus_2_rsx_v2_7.tpc
basic_plus_2_rsx_v2_7.zip
cobol_v4_4.tpc
cobol_v4_4.zip
dibol_v1_4.tpc
dibol_v1_4.zip
INSTRUCTIONS/
INSTRUCTIONS/install-1-sysgen.html
INSTRUCTIONS/install-2-decnet.html
INSTRUCTIONS/install-3-basic-plus.html
INSTRUCTIONS/install-4-Dibol-Pascal-C-Cobol.html
INSTRUCTIONS/install-5-finishing-up.html
pascal_v1_3.tpc
pascal_v1_3.zip
pdp11
pdp11_c_v1_1.tpc
pdp11_c_v1_1.zip
pdp11.ini
pdp11.ini.bak
pdp8
rsx11m6.dsk
rsx11mpbl87.dsk
rsx11mpbl87.dsk.bz2
rsxm70.dsk.bz2
run
rundecnet
[openvms@sanyalnet-cloud-vps2 pdp11]$ chmod a-w *tgz
[openvms@sanyalnet-cloud-vps2 pdp11]$ chmod a-w *zip
[openvms@sanyalnet-cloud-vps2 pdp11]$ ls -lrt
total 766644
-rwxr-x--- 1 openvms openvms 3211264 Mar 22 2000 pdp11_c_v1_1.tpc
-rwxr-x--- 1 openvms openvms 2129920 Mar 22 2000 basic_plus_2_rsx_v2_5.tpc
-rwxr-x--- 1 openvms openvms 1343488 Mar 23 2000 cobol_v4_4.tpc
-rwxr-x--- 1 openvms openvms 770048 Mar 23 2000 dibol_v1_4.tpc
-rwxr-x--- 1 openvms openvms 1441792 Mar 23 2000 pascal_v1_3.tpc
-rwxr-x--- 1 openvms openvms 3246080 Jul 13 2000 basic_plus_2_rsx_v2_7.tpc
-rwx------ 1 openvms openvms 690234 Nov 20 16:08 pdp8
-rwx------ 1 openvms openvms 1767283 Nov 20 16:08 pdp11
-rw-rw-r-- 1 openvms openvms 20167078 Nov 20 16:10 rsx11mpbl87.dsk.bz2
-rw-rw-r-- 1 openvms openvms 5518106 Nov 20 16:11 rsxm70.dsk.bz2
-rw-rw-r-- 1 openvms openvms 398 Nov 20 16:12 run
-rw-rw-r-- 1 openvms openvms 159350784 Nov 20 16:41 rsx11mpbl87.dsk
drwxrwxr-x 2 openvms openvms 4096 Nov 20 16:57 INSTRUCTIONS
-r--r--r-- 1 openvms openvms 74059458 Nov 20 17:00 install-1-sysgen-complete.tgz
-rw-rw-r-- 1 openvms openvms 449 Nov 20 17:08 rundecnet
-r--r--r-- 1 openvms openvms 75064781 Nov 20 17:33 install-2-decnet-complete.tgz
-rw-rw-r-- 1 openvms openvms 461 Nov 20 17:48 pdp11.ini
-r--r--r-- 1 openvms openvms 809685 Nov 20 17:49 basic_plus_2_rsx_v2_5.zip
-r--r--r-- 1 openvms openvms 1312839 Nov 20 17:49 basic_plus_2_rsx_v2_7.zip
-r--r--r-- 1 openvms openvms 80494298 Nov 20 18:32 install-3-basicplus2-complete.tgz
-r--r--r-- 1 openvms openvms 296275 Nov 20 19:06 dibol_v1_4.zip
-r--r--r-- 1 openvms openvms 479851 Nov 20 19:06 pascal_v1_3.zip
-r--r--r-- 1 openvms openvms 1105096 Nov 20 19:06 pdp11_c_v1_1.zip
-r--r--r-- 1 openvms openvms 620023 Nov 20 19:06 cobol_v4_4.zip
-rw-rw-r-- 1 openvms openvms 461 Nov 20 19:09 pdp11.ini.bak
-r--r--r-- 1 openvms openvms 88344792 Nov 20 19:48 install-4-dibol-pascal-c-cobol-complete.tgz
-rw-rw-r-- 1 openvms openvms 174423040 Nov 20 20:05 rsx11m6.dsk
-r--r--r-- 1 openvms openvms 88345832 Nov 20 20:06 install-5-finish-up-complete.tgz
[openvms@sanyalnet-cloud-vps2 pdp11]$ du -h
320K ./INSTRUCTIONS
749M .
[openvms@sanyalnet-cloud-vps2 pdp11]$ sudo ./pdp11
[sudo] password for openvms:
PDP-11 simulator V4.0-0 Beta git commit id: c9af9a70
Disabling XQ
libpcap version 1.5.3
Eth: opened OS device tap2
sim> b rp0
RSX-11M-PLUS V4.6 BL87 1024.KW System:"JUICHI"
>RED DB:=SY:
>RED DB:=LB:
>RED DB:=SP:
>MOU DB0:"RSX11MPBL87"
>@DB:[1,2]STARTUP
>; PLEASE NOTE
>;
>; If you have not yet read the system release notes, please do so
>; now before attempting to perform a SYSGEN or to utilize the new
>; features of this system.
>;
>;
>* Please enter time and date (HH:MM DD-MMM-YYYY) [S]: 20L
>* Please enter time and date (HH:MM DD-MMM-YYYY) [S]: 20:08 20-nov-2016
>TIME 20:08 20-nov-2016
>ACS SY:/BLKS=1024.
>CON ONLINE ALL
>ELI /LOG/LIM
>CLI /INIT=DCL/CTRLC/DPR="<15><12>/$ /"
>INS LB:[1,1]RMSRESAB.TSK/RON=YES/PAR=GEN
>INS LB:[1,1]RMSLBL.TSK/RON=YES/PAR=GEN
>INS LB:[1,1]RMSLBM.TSK/RON=YES/PAR=GEN
>INS $QMGCLI
>INS $QMGCLI/TASK=...PRI
>INS $QMGCLI/TASK=...SUB
>QUE /START:QMG
>INS $QMGPRT/TASK=PRT.../SLV=NO
>QUE LP0:/CR/NM
>START/ACCOUNTING
>CON ESTAT LP0:
>QUE BAP0:/BATCH
>QUE BAP0:/AS:BATCH
>ins lb:[1,1]dblrsx/par=gen
>ins $dibol83
>ins $dblmsgmgr
>ins $dblsort1
>ins $dblsort2
>ins $dblmnugen/task=b
>dcl run msgmgr /delay=1s
>ins lb:[3,54]f77.tsk/task=b
INS -- Task name already in use
>ins lb:[3,54]pdp11c.tsk/task=b
INS -- Task name already in use
>ins lb:[1,1]pdppas.tsk/task=b
INS -- Task name already in use
>INS LB:[1,1]BP2RES/RON=YES/PAR=GEN
>ins lb:[1,54]bp2ic2.tsk/task=b
INS -- Task name already in use
>ins lb:[6,3]cobol.tsk
>ins lb:[6,3]cblmrg.tsk
>ins lb:[6,3]refrmt.tsk
INS -- File not found
>asn db0:=xx:
>;ASKN [1:377:200] NETXXU What is the network UIC group code
>ASN XX:=LB:
>SET /SYSUIC=[5,54]
>LOA NN:/VEC
>CON ONL NN:
>SET /SYSUIC=[1,54]
>ASN =LB:
>INS XX:[5,54]SCPRES
>INS XX:[5,54]NNS
>;INS XX:[5,54]NNCRES
>SCP START FROM XX:[5,54] SIL (I)
>INS XX:[5,54]NTINIT
>INS XX:[5,54]NTL
>INS XX:[5,54]MLD
>INS XX:[5,54]EVC
>INS XX:[5,54]NCPRES
>; INS XX:[5,54]CFERES
>; INS XX:[5,54]VNP
>INS XX:[5,54]NMVACP
>SET /SYSUIC=[5,54]
>ASN XX:=LB:
>LOA NM:/HIGH/VEC
>CON ONL NM:
>ASN =LB:
>SET /SYSUIC=[1,54]
>INS XX:[5,54]LOO
>INS XX:[5,54]LOO/TASK=LOO...
>INS XX:[5,54]EVFRES
>INS XX:[5,54]NETACP
>INS XX:[5,54]NICE
>INS XX:[5,54]EVR
>INS XX:[5,54]NTD
>INS XX:[5,54]NTDEMO
>INS XX:[5,54]LIN
>INS XX:[5,54]MIR
>INS XX:[5,54]NVP
>INS XX:[5,54]NFTRES
>INS XX:[5,54]FTSRES
>INS XX:[5,54]FTSDEQRES
>SET /UIC=[1,1]
>PIP LB:[0,0]001004.DIR/PR:0
>SET /UIC=[200,200]
>QUE FTSQUE:/CR/NM
>QUE FTSDEQ:/SP/EX
>QUE FTSDEQ:/AS:FTSQUE
>INS XX:[5,54]FAL
>INS XX:[5,54]FALLOG
>INS XX:[5,54]MCM
>INS XX:[5,54]RMT
>INS XX:[5,54]RMTACP/CLI=YES
>CLI /INIT=RMTACP/NULL/RESTRICT/CPR="<15><12>/RMT>/"
>SET /SYSUIC=[5,54]
>ASN XX:=LB:
>LOA HT:/HIGH/VEC
>SET /SYSUIC=[1,54]
>ASN =LB:
>INS XX:[5,54]RMHACP
>INS XX:[5,54]NCTCTL
>INS XX:[5,54]TLKRES
>INS XX:[5,54]LSN
>INS XX:[5,54]PHONE/TASK=...PHO
>INS XX:[5,54]PHONE/TASK=PHO$$$
>INS XX:[5,54]TCL
>INS XX:[5,54]CFERES
>CFE @XX:[005,001]NETRND
>PIP XX:[005,001]NETRND.COM=XX:[005,001]NETRND.CMD/RE
PIP -- Directory write protected
DB:[005,001]NETRND.CMD -- Privilege violation
>REM ...CFE
>NCP SET SYS
>NCP SET EXE STA ON
Event type 2.0, Local node state change
Occurred 20-NOV-16 20:08:10 on node 1.552 (JUICHI)
Reason for state change: Operator command, Old node state = Off
New node state = On
Event type 4.10, Circuit up
Occurred 20-NOV-16 20:08:11 on node 1.552 (JUICHI)
Circuit UNA-0
>ins $edt
>ins $tkb
>@ <EOF>
>
Event type 4.15, Adjacency up
Occurred 20-NOV-16 20:08:11 on node 1.552 (JUICHI)
Circuit UNA-0
Adjacent node = 1.13 (MIM)
>bye
Have a Good Evening
20-NOV-16 20:09 TT0: logged off JUICHI
>
>
>hello system
Password:
RSX-11M-PLUS V4.6 BL87 [1,54] System JUICHI
20-NOV-16 20:09 Logged on Terminal TT0: as SYS1
Good Evening
*****************************************************************
* *
* Welcome to RSX-11M-PLUS *
* *
* Version 4.6 Base level 87 *
* This is file LB:[1,2]LOGIN.TXT *
* *
*****************************************************************
Last interactive login on Sunday, November 20, 2016 19:55:16 (TT0:)
>
>dir 1:13LL
PIP -- Error from parse
1:[1,1]13LL -- Invalid device or unit
>dir 1.13::
NFT -- Error in reading directory 1.13::
Unrecognized node name
>dir MIM::
NFT -- Error in reading directory MIM::
Access control rejected
>dir cloudy::
Directory CLOUDY::DUA2:[FAL$SERVER]
20-NOV-16 20:11:52
INFO.TXT;8 5./6. 18-NOV-16 14:23:51
NET$SERVER.LOG;13 0./6. 20-NOV-16 20:11:58
NET$SERVER.LOG;12 4./6. 20-NOV-16 15:17:19
NET$SERVER.LOG;11 2./3. 20-NOV-16 15:12:00
VUPS.COM;1 7./9. 17-DEC-12 16:01:07
Total of 18./30. Blocks in 5. Files
>dir qcocal::
NFT -- Error in reading directory QCOCAL::
Access control rejected
>
>
>dir ^U
>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.