Create a gist now

Instantly share code, notes, and snippets.

What would you like to do?
Installing DECNET support on PDP-11/24 running RSX-11M-PLUS 4.6
[openvms@sanyalnet-cloud-vps2 pdp11]$ ###############################
[openvms@sanyalnet-cloud-vps2 pdp11]$ ### Based on the fantastic instructions at http://pdp2011.sytse.net/wordpress/install-2/
[openvms@sanyalnet-cloud-vps2 pdp11]$ ###############################
[openvms@sanyalnet-cloud-vps2 pdp11]$ vi rundecnet
[openvms@sanyalnet-cloud-vps2 pdp11]$ ########################
[openvms@sanyalnet-cloud-vps2 pdp11]$ cat rundecnet
set cpu 11/70
set cpu 2m
set lpt disable
set ptr disable
set ptp disable
set dz disable
set rk disable
set rl disable
set hk disable
set rx disable
set tq disable
set cr disable
set xq disable
; Network Adapter
set xu enable
attach xu tap:tap2
;
set rq disable
set tm disable
;boot disk
set rp0 rp06
att rp0 rsx11m6.dsk
;
set rp1 disable
set rp2 disable
set rp3 disable
set rp4 disable
set rp5 disable
set rp6 disable
set rp7 disable
set ts disable
[openvms@sanyalnet-cloud-vps2 pdp11]$ ###############################
[openvms@sanyalnet-cloud-vps2 pdp11]$ ./pdp11 rundecnet
PDP-11 simulator V4.0-0 Beta git commit id: c9af9a70
Disabling XQ
libpcap version 1.5.3
Eth: opened OS device tap2
sim> boot rp0
RSX-11M-PLUS V4.6 BL87 1024.KW System:"JUICHI"
>RED DB:=SY:
>RED DB:=LB:
>RED DB:=SP:
>MOU DB0:"RSX11MPBL87"
>@DB:[1,2]STARTUP
>; PLEASE NOTE
>;
>; If you have not yet read the system release notes, please do so
>; now before attempting to perform a SYSGEN or to utilize the new
>; features of this system.
>;
>;
>* Please enter time and date (HH:MM DD-MMM-YYYY) [S]: 17:09 20-NOV-2016
>TIME 17:09 20-NOV-2016
>ACS SY:/BLKS=1024.
>CON ONLINE ALL
>ELI /LOG/LIM
>CLI /INIT=DCL/CTRLC/DPR="<15><12>/$ /"
>INS LB:[1,1]RMSRESAB.TSK/RON=YES/PAR=GEN
>INS LB:[1,1]RMSLBL.TSK/RON=YES/PAR=GEN
>INS LB:[1,1]RMSLBM.TSK/RON=YES/PAR=GEN
>INS $QMGCLI
>INS $QMGCLI/TASK=...PRI
>INS $QMGCLI/TASK=...SUB
>QUE /START:QMG
>INS $QMGPRT/TASK=PRT.../SLV=NO
>QUE LP0:/CR/NM
>START/ACCOUNTING
>CON ESTAT LP0:
>QUE BAP0:/BATCH
>QUE BAP0:/AS:BATCH
>@ <EOF>
>
>set /uic=[137,10]
>@NETGEN
>;
>; =====================================================================
>; NET - RSX-11M-PLUS CEX System Generation Procedure
>; Started at 17:09:45 on 20-NOV-16
>; =====================================================================
>;
>; Copyright (c) 1996,1997,1998 by Mentec, Inc., U.S.A.
>; All rights reserved
>;
>; Generate a CEX System, Version 04.06, for your RSX-11M-PLUS target system.
>;
>; The following CEX Products may be generated
>; DECnet
>;
>; The distribution kits must be up to the current patch level. If
>; necessary, you should stop the generation and apply the necessary
>; patches.
>;
>; The logical device name LB: should already be assigned to the device
>; which contains the library files for the system you are generating.
>; These files are EXELIB.OLB, EXEMC.MLB, RSXMAC.SML, SYSLIB.OLB and
>; NOANSLIB.OLB for RSX-11M-PLUS and 11SLIB.OLB for RSX-11S.
>;
>; The logical device names IN:, OU:, LS: and MP: should not be assigned
>; to any devices before starting the generation. These logical device
>; names are used by NETGEN to refer to various disks used during the
>; generation.
>;
>;
>; <EOS> Do you want to:
>* <RET>-Continue, E-Exit [S]:
>;
>;
>; ====================================================================
>; NETGEN Disk contains NO DECNET AUTOPATCH corrections
>; ====================================================================
>;
>; =====================================================================
>; NET - Section 1 - General Initialization
>; =====================================================================
>;
>* 01.00 Do you want to see the NETGEN notes/cautions [D=N]? [Y/N]:
>* 02.00 Target system device [dduu, D=SY:] [S]:
>* 03.00 Listing/map device [dduu, D=None] [S]:
>* 04.00 UIC Group Code for NETGEN output [O R:1-377 D:5]:
>;
>; Checking for required tasks and UICs.
>;
>;
>; Creating UFD for SY:[005,001]
>; Creating UFD for SY:[005,010]
>;
>; 07.00 User ID to be used to identify your new responses
>* [D=None] [S R:0.-30.]:
>* 08.00 Is this generation to be a dry run [D=N]? [Y/N]:
>* 09.00 Do you want a standard function network [D=N]? [Y/N]: Y
>* 11.00 Should old files be deleted [D=N]? [Y/N]: Y
>;
>; <EOS> Do you want to:
>* <RET>-Continue, R-Repeat section, P-Pause, E-Exit [S]:
>;
>;
>; =====================================================================
>; NET - Section 2 - Define the target system
>; =====================================================================
>;
>* 02.00 RSXMC.MAC location (ddu:[g,m], D=SY:[011,010]) [S]:
>;
>; SY00:[011,010]RSXMC.MAC is being copied to SY:[005,010]RSXMC.MAC
>;
>; SY:[005,010]RSXMC.MAC is being scanned to define your target system.
>; This may take up to several minutes.
>;
>; The target is an RSX-11M-PLUS system, with...
>; A 20K-Executive
>; Kernel data space enabled
>; Extended memory support (more than 124K words of memory)
>; Multi-user protection
>; Extended instruction set (EIS)
>; Powerfail recovery support
>; Dynamic task checkpoint allocation
>; PLAS support
>; Queue Manager (QMG) support
>;
>; Creating UFD for SY:[005,024]
>; Creating UFD for SY:[005,054]
>;
>* 04.00 RSX11M.STB location (ddu:[g,m], D=SY00:[001,054]) [S]:
>;
>; SY00:[001,054]RSX11M.STB is being copied to SY:[005,054]RSX11M.STB
>;
>;
>; Checking for required library files and tasks.
>;
>* 05.00 Should tasks link to the Supervisor Mode FCS library [D=N]? [Y/N]:
>* 06.00 Should tasks link to the Memory Resident FCS library [D=N]? [Y/N]: Y
>;
>; The DECnet CEX Product will be generated.
>;
>; Only non-routing nodes can be generated from your distribution kit.
>;
>;
>; <EOS> Do you want to:
>* <RET>-Continue, R-Repeat section, P-Pause, E-Exit [S]:
>;
>;
>; =====================================================================
>; NET - Section 3 - Define the system lines
>; =====================================================================
>;
>* 01.00 Device Driver Process name [<RET>=Done] [S R:0-3]: UNA
>* 02.00 How many UNA controllers are there [D R:1.-16. D:1.]:
>;
>* 03.01 CSR address for UNA-0 [O R:160000-177777 D:174510]:
>* 03.02 Vector address for UNA-0 [O R:0-774 D:120]:
>* 03.03 Device priority for UNA-0 [O R:4-6 D:5]:
>;
>* 04.07 Set the state for UNA-0 ON when loading the network [D=N]? [Y/N]: Y
>;
>* 01.00 Device Driver Process name [<RET>=Done] [S R:0-3]:
>;
>;
>; <EOS> Do you want to:
>* <RET>-Continue, R-Repeat section, P-Pause, E-Exit [S]:
>;
>;
>; =====================================================================
>; NET - Section 4 - Define the CEX System
>; =====================================================================
>;
>; Creating build files for AUX, the CEX Auxillary routine.
>;
>; Creating build files for CETAB, the CEX configuration tables.
>;
>; Creating build files for the DDMs, the device driver modules.
>;
>; UNA
>;
>;
>; <EOS> Do you want to:
>* <RET>-Continue, R-Repeat section, P-Pause, E-Exit [S]:
>;
>;
>; =====================================================================
>; NET - Section 5 - Define the Comm Exec Support Components
>; =====================================================================
>;
>; Creating build files for NTINIT, the network initializer.
>;
>; Creating build files for NTL, the network loader.
>;
>; Creating build files for MLD, the general microcode loader.
>;
>; Creating build files for EVL/EVC, the event logger and collector.
>;
>; EVL will use 6. event buffers.
>;
>; =====================================================================
>; NET - Section 6 - Define the System Management Utilities
>; =====================================================================
>;
>; Creating build files for NCP, the network control program.
>;
>; Creating build files for NMVACP and NMDRV, the Network Management
>; Volatile ACP and driver.
>;
>; Creating build files for CFE, the configuration file editor.
>;
>; Creating build files for NDA, the network dump analyzer.
>;
>; Creating build files for VNP, the virtual network control program.
>;
>; Creating build files for LOO, the loop test sender task.
>;
>; Creating build files for EVF, the event file interpreter program.
>;
>;
>; =====================================================================
>; NET - Section 7 - Define the CEX Products
>; =====================================================================
>;
>; Questions concerning the following CEX Products will now be asked.
>;
>; DECnet
>;
>;
>; =====================================================================
>; DEC - DECnet CEX Product Generation Procedure
>; Starting questions at 17:14:10 on 20-NOV-16
>; =====================================================================
>;
>; Copyright (c) 1996,1997,1998 by Mentec, Inc., U.S.A.
>; All rights reserved
>;
>; Generate the DECnet CEX Product for your RSX-11M-PLUS target
>; System.
>;
>; =====================================================================
>; DEC - Section 1 - Define the target and remote nodes
>; =====================================================================
>;
>* 01.00 What is the target node name [S R:0-6]: JUICHI
>* 02.00 What is the target node address [S R:0.-8.]: 1.552
>* 03.00 Target node ID [D=None] [S R:0.-32.]: RSX-11M-PLUS V4.6
AT.T0 -- Invalid answer or terminator
>* 03.00 Target node ID [D=None] [S R:0.-32.]: [D
AT.T0 -- Invalid answer or terminator
>* 03.00 Target node ID [D=None] [S R:0.-32.]: [D
AT.T0 -- Invalid answer or terminator
>* 03.00 Target node ID [D=None] [S R:0.-32.]: RSX-11M-PLUS V4.6
AT.T0 -- Invalid answer or terminator
>* 03.00 Target node ID [D=None] [S R:0.-32.]: [D
AT.T0 -- Invalid answer or terminator
>* 03.00 Target node ID [D=None] [S R:0.-32.]: PDP-11/24 RSX-11M-PLUS V4.6
AT.T0 -- String length not in range
>* 03.00 Target node ID [D=None] [S R:0.-32.]: PDP-11/24 RSX-11M-PLUS 4.6
>;
>; Node type is non-routing
>;
>; Extended network support for network command terminals and products
>; layered on DECnet, will be included.
>;
>* 07.00 Remote node name [<RET>=Done] [S R:0-6]: CLOUDY
>* 07.01 What is the remote node address [D=1.1] [S R:0.-8.]: 1.551
>;
>* 07.00 Remote node name [<RET>=Done] [S R:0-6]: QCOCAL
>* 07.01 What is the remote node address [D=1.553] [S R:0.-8.]: 1.550
>;
>* 07.00 Remote node name [<RET>=Done] [S R:0-6]: MIM
>* 07.01 What is the remote node address [D=1.551] [S R:0.-8.]: 1.13
>;
>* 07.00 Remote node name [<RET>=Done] [S R:0-6]:
>;
>; The DECnet MACRO user library and FORTRAN/COBOL/BASIC+2 library will
>; be included.
>;
>; The DECnet MACRO user library will be placed on your target disk
>; as "SY:[1,1]NETLIB.MLB".
>;
>; The DECnet FORTRAN/COBOL/BASIC+2 object library will be placed on your
>; target disk as "SY:[1,1]NETFOR.OLB".
>;
>; If necessary, please move them to the library disk (LB:) on your
>; target system, if this is different from your target disk (SY:).
>;
>;
>; <EOS> Do you want to:
>* <RET>-Continue, R-Repeat section, P-Pause, E-Exit [S]:
>;
>;
>; =====================================================================
>; DEC - Section 2 - Define the DECnet Communications Components
>; =====================================================================
>;
>; Creating build files for XPT, the routing process.
>;
>; Creating build files for ECL, the network services process and driver.
>;
>; Creating build files for NETACP, the network services ACP.
>;
>; NETACP will be checkpointable.
>;
>; Creating build files for EPM, the Ethernet protocol manager process.
>;
>; =====================================================================
>; DEC - Section 3 - Define the DECnet Network Management Components
>; =====================================================================
>;
>; Creating build files for NICE, the network information and control
>; server task.
>;
>; Creating build files for EVR, the network event receiver task.
>;
>; Creating build files for NTD, the node state display task.
>;
>; Creating build files for NTDEMO, the node state display server task.
>;
>; Creating build files for LIN, the link watcher task.
>;
>; Creating build files for MIR, the loop test mirror task.
>;
>; Creating build files for NVP, the network connect verification task.
>;
>; Creating build files for SCP, the node name server control task.
>;
>; Creating build files for NNC, the node name collector task.
>;
>; Creating build files for NNS, the node name server.
>;
>;
>; =====================================================================
>; DEC - Section 4 - Define the DECnet Satellite Support Components
>; =====================================================================
>;
>* 02.00 Do you want the Satellite Support Components [D=N]? [Y/N]:
>;
>; <EOS> Do you want to:
>* <RET>-Continue, R-Repeat section, P-Pause, E-Exit [S]:
>;
>;
>; =====================================================================
>; DEC - Section 5 - Define the DECnet File Utilities
>; =====================================================================
>;
>; Creating build files for NFT, the network file access user task.
>;
>; Creating build files for FTS, the network file access spooler
>; user task.
>;
>; Creating build files for FAL, the network file access server.
>;
>; FAL will support RMS file access.
>; FAL will be a multi-copy object.
>; FAL will not be overlaid.
>; FAL will use the memory resident RMS library.
>; FAL user data buffer size will be 2048 bytes.
>;
>; Creating build files for MCM, the network command or batch file
>; submission server.
>;
>; MCM requests will be queued to BATCH.
>;
>; =====================================================================
>; DEC - Section 6 - Define the DECnet Terminal and Control Utilities
>; =====================================================================
>;
>; Creating build files for RMT and RMTACP, the remote network terminal
>; task and ACP.
>;
>; The maximum number of simultaneous RMT users is 4.
>;
>; Creating build files for HT: and RMHACP, the remote network terminal
>; driver and ACP.
>;
>; RMHACP will support 4 simultaneous incoming connections.
>; HTDRV will support 4 HT: units.
>;
>; Creating build files for NCT, the network command terminal server
>;
>; Creating build files for RTH, the network command terminal host
>; support.
>;
>; Creating build files for TLK, the remote talk user task.
>;
>; Creating build files for LSN, the remote talk server task.
>;
>; Creating build files for PHO, the inter-terminal conversation utility.
>;
>; Creating build files for LAT/LCP, the Local Area Transport terminal
>; service process and LAT Control Program
>;
>; Creating build files for TCL, the remote task control server task.
>;
>;
>; =====================================================================
>; DEC - DECnet CEX Product Generation Procedure
>; DECnet question/answer section completed at 17:24:43 on 20-NOV-16
>; =====================================================================
>;
>;
>; =====================================================================
>; NET - Section 8 - Complete the CEX System Definitions
>; =====================================================================
>;
>; Creating build files for DLX, the Direct Line Access process.
>;
>* 02.00 What is the Large Data Buffer (LDB) size [D R:576.-1484. D:576.]:
>;
>; <EOS> Do you want to:
>* <RET>-Continue, R-Repeat section, P-Pause, E-Exit [S]:
>;
>;
>; =====================================================================
>; NET - Section 9 - Build the CEX System at 17:25:12 on 20-NOV-16
>; =====================================================================
>;
>; All questions have now been asked and the selected components will now
>; be built. This may take from one to three hours, depending on the
>; selection of components and the system you are running on.
>;
>PIP SY:[005,054]CETAB.MAC/PU/NM
>PIP SY:[005,054]AUX.DAT/PU/NM
>;
>SET /UIC=[1,2]
>PIP OU:[1,2]NETHLP.ULB=IN:[1,2]NETHLPD.HLP
>PIP OU:[1,2]NETHLP.ULB/PU/NM
>SET /UIC=[005,024]
>;
>PIP OU:[5,54]/NV=IN:[3,54]RSXVEC.STB
>PIP OU:[5,54]/NV/CO=IN:[131,54]AUX.TSK
>PIP OU:[5,54]/NV=IN:[131,54]AUX.STB
>PIP OU:[5,54]AUX.TSK/PU/NM,AUX.STB
>MAC @OU:[5,24]CETABASM.CMD
I 35 000000 NOD$DF <JUICHI>,<PDP-11/24 RSX-
11M-PLUS4? 4.6>,1.,552.,1.,552.
MAC -- Errors detected: 1
OU:[5,24]CETAB,LS:[5,34]CETAB.LST/-SP=IN:[130,10]NETLIB/ML,OU:[005,010]RSXMC,[5,
54]CETAB
>PIP OU:[5,24]CETAB.OBJ/PU/NM
>TKB @OU:[5,24]CETABBLD.CMD
>PIP OU:[5,54]CETAB.TSK/PU/NM,CETAB.STB
>PIP OU:[5,54]/NV/CO=IN:[132,54]NTINIT.TSK
>PIP OU:[5,54]NTINIT.TSK/PU/NM
>PIP OU:[5,54]/NV/CO=IN:[132,54]NTL.TSK
>PIP OU:[5,54]NTL.TSK/PU/NM
>PIP OU:[5,54]/NV/CO=IN:[132,54]MLD.TSK
>PIP OU:[5,54]/NV=IN:[132,54]MLD.STB
>PIP OU:[5,54]MLD.TSK/PU/NM,MLD.STB
>MAC @OU:[5,24]EVLASM.CMD
>PIP OU:[5,24]EVLDAT.OBJ/PU/NM
>TKB @OU:[5,24]EVLBLD.CMD
>PIP OU:[5,54]/NV=IN:[131,24]EVL.DAT
>PIP OU:[5,54]EVL.TSK/PU/NM,EVL.STB,EVL.DAT
>TKB @OU:[5,24]EVCBLD.CMD
>PIP OU:[5,54]EVC.TSK/PU/NM
>PIP OU:[5,54]/NV/CO=IN:[135,54]NCPRES.TSK
>PIP OU:[5,54]NCPRES.TSK/PU/NM
>MAC @OU:[5,24]NMVACPASM.CMD
>PIP OU:[5,24]NMDRV.OBJ/PU/NM,NMTAB.OBJ
>TKB @OU:[5,24]NMVACPBLD.CMD
>PIP OU:[5,54]/NV/CO=IN:[135,54]NMVACP.TSK
>PIP OU:[5,54]/NV=IN:[135,54]NMVACP.STB
>PIP OU:[5,54]NMVACP.TSK/PU/NM,NMDRV.TSK,NMDRV.STB
>PIP OU:[5,54]/NV/CO=IN:[132,54]CFERES.TSK
>PIP OU:[5,54]CFERES.TSK/PU/NM
>PIP OU:[5,54]/NV/CO=IN:[141,54]NDA.TSK
>PIP OU:[5,54]NDA.TSK/PU/NM
>PIP OU:[5,54]/NV/CO=IN:[132,54]VNP.TSK
>PIP OU:[5,54]VNP.TSK/PU/NM
>PIP OU:[5,54]/NV/CO=IN:[135,54]LOO.TSK
>PIP OU:[5,54]/NV=IN:[135,54]LOO.STB
>PIP OU:[5,54]LOO.TSK/PU/NM,LOO.STB
>PIP OU:[5,54]/NV/CO=IN:[135,54]EVFRES.TSK
>PIP OU:[5,54]EVFRES.TSK/PU/NM
>MAC @OU:[5,24]DLXASM.CMD
>PIP OU:[5,24]DLXTAB.OBJ/PU/NM
>TKB @OU:[5,24]DLXBLD.CMD
>PIP OU:[5,54]DLX.DAT/NV=IN:[131,24]DLX.DAT
>PIP OU:[5,54]DLX.TSK/PU/NM,DLX.STB,DLX.DAT
>PIP OU:[5,54]DLXTAB.TSK/PU/NM,DLXTAB.STB
>;
>TKB @OU:[5,24]UNABLD.CMD
>PIP OU:[5,54]UNA.TSK/PU/NM,UNA.STB
>PIP OU:[5,54]/NV=IN:[131,24]UNA.DAT
>PIP OU:[5,54]UNA.DAT/PU/NM
>PIP OU:[5,54]/NV/CO=IN:[131,54]UNAMC.TSK
>PIP OU:[5,54]UNAMC.TSK/PU/NM
>SET /UIC=[1,1]
>PIP OU:[1,1]NETLIB.MLB/NV=IN:[1,10]NETLIBU.MLB
>PIP OU:[1,1]NETLIB.MLB/PU
>LBR OU:[1,1]NETFOR.OBS=IN:[133,24]DAPFOR/EX
>LBR OU:[1,1]NETTMP.OBS=IN:[133,24]DAPTRC/EX
>LBR OU:[1,1]NETFOR/CO:1:320.:192.=IN:[134,24]NETFOR.OLB
>LBR OU:[1,1]NETFOR/IN=OU:[1,1]NETFOR.OBS
>LBR OU:[1,1]NETFOR/IN/-EP=OU:[1,1]NETTMP.OBS
>LBR OU:[1,1]NETFOR/DG:$MBLUN:$ASTBL:$ASTLU
Entry points deleted:
$MBLUN
$ASTBL
$ASTLU
>PIP OU:[1,1]NETFOR.OBS;*/DE,NETTMP.OBS;*
>PIP OU:[1,1]NETFOR.OLB/PU
>SET /UIC=[005,024]
>PIP OU:[005,024]/NV=IN:[137,24]NTEST.CMD
>PIP OU:[005,024]NTEST.CMD/PU/NM
>SET /UIC=[005,054]
>PIP OU:[005,054]/NV/CO=IN:[133,54]DTS.TSK,DTR.TSK
>PIP OU:[005,054]DTS.TSK/PU/NM,DTR.TSK
>SET /UIC=[005,024]
>TKB @OU:[5,24]XPTBLD.CMD
>PIP OU:[5,54]XPT.DAT/NV=IN:[131,24]XPT.DAT
>PIP OU:[5,54]XPT.TSK/PU/NM,XPT.STB,XPT.DAT
>MAC @OU:[5,24]ECLASM.CMD
>PIP OU:[5,24]ECLTAB.OBJ/PU/NM
>TKB @OU:[5,24]ECLBLD.CMD
>PIP OU:[5,54]ECL.DAT/NV=IN:[131,24]ECL.DAT
>PIP OU:[5,54]ECL.TSK/PU/NM,ECL.STB,ECLTAB.TSK,ECLTAB.STB,ECL.DAT
>PIP OU:[5,54]/NV/CO=IN:[135,54]PROXY.TSK
>TKB @OU:[5,24]NETACPBLD.CMD
>PIP OU:[5,54]NETACP.TSK/PU/NM,NETACP.STB
>TKB @OU:[5,24]EPMBLD.CMD
>PIP OU:[5,54]/NV=IN:[131,24]EPM.DAT,EPMST.DAT
>PIP OU:[5,54]EPM.TSK/PU/NM,EPM.STB,EPM.DAT,EPMST.DAT
>PIP OU:[5,54]/NV/CO=IN:[135,54]NICE.TSK
>PIP OU:[5,54]NICE.TSK/PU/NM
>PIP OU:[5,54]/NV/CO=IN:[135,54]EVR.TSK
>PIP OU:[5,54]EVR.TSK/PU/NM
>PIP OU:[5,54]/NV/CO=IN:[135,54]NTD.TSK
>PIP OU:[5,54]NTD.TSK/PU/NM
>PIP OU:[5,54]/NV/CO=IN:[135,54]NTDEMO.TSK
>PIP OU:[5,54]NTDEMO.TSK/PU/NM
>PIP OU:[5,54]/NV/CO=IN:[135,54]LIN.TSK
>PIP OU:[5,54]LIN.TSK/PU/NM
>PIP OU:[5,54]/NV/CO=IN:[135,54]MIR.TSK
>PIP OU:[5,54]/NV=IN:[135,54]MIR.STB
>PIP OU:[5,54]MIR.TSK/PU/NM,MIR.STB
>PIP OU:[5,54]/NV/CO=IN:[132,54]NVP.TSK
>PIP OU:[5,54]NVP.TSK/PU/NM
>PIP OU:[5,54]/NV/CO=IN:[165,54]SCPRES.TSK
>PIP OU:[5,54]SCPRES.TSK/PU/NM
>PIP OU:[5,54]/NV/CO=IN:[161,54]NNCRES.TSK
>PIP OU:[5,54]NNCRES.TSK/PU/NM
>PIP OU:[5,54]/NV/CO=IN:[162,54]NNDRV.TSK,NNDRV.STB,NNS.TSK,IN:[162,24]NNS.DAT
>PIP OU:[5,54]NNDRV.TSK,NNDRV.STB,NNS.TSK,NNS.DAT/PU/NM
>TKB @OU:[5,24]NFTBLD.CMD
>PIP OU:[5,54]NFTRES.TSK/PU/NM
>SET /UIC=[5,24]
>MAC @OU:[5,24]FTSASM.CMD
>TKB @OU:[5,24]FTSBLD.CMD
>PIP OU:[5,54]FTSRES.TSK/PU/NM,FTSDEQRES.TSK
>SET /UIC=[5,24]
>MAC @OU:[5,24]FALASM.CMD
>PIP OU:[5,24]FALPRM.OBJ/PU/NM
>TKB @OU:[5,24]FALBLD.CMD
>PIP OU:[5,54]FAL.TSK/PU/NM,FALRES.TSK,FALFSL.TSK
>TKB @OU:[5,24]MCMBLD.CMD
>PIP OU:[5,54]MCM.TSK/PU/NM
>MAC @OU:[5,24]RMTASM.CMD
>PIP OU:[5,24]RMTACP.OBJ/PU/NM
>TKB @OU:[5,24]RMTBLD.CMD
>PIP OU:[5,54]RMT.TSK/PU/NM,RMTACP.TSK
>MAC @OU:[5,24]RMHACPASM.CMD
>PIP OU:[5,24]RMHACP.OBJ/PU/NM,HTTAB.OBJ
>TKB @OU:[5,24]RMHACPBLD.CMD
>PIP OU:[5,54]RMHACP.TSK/PU/NM,HTDRV.TSK,HTDRV.STB
>PIP OU:[5,54]/NV/CO=IN:[140,54]TRXCTL.TSK
>PIP OU:[5,54]/NV/CO=IN:[140,54]TRXCOL.TSK
>PIP OU:[5,54]TRXCTL.TSK/PU/NM
>PIP OU:[5,54]TRXCOL.TSK/PU/NM
>TKB @OU:[5,24]NCTBLD.CMD
>PIP OU:[5,54]NCT.DAT/NV=IN:[140,24]NCT.DAT
>PIP OU:[5,54]NCT.TSK/PU/NM,NCT.STB,NCT.DAT
>PIP OU:[5,54]NCT1.TSK/PU/NM,NCT1.STB
>PIP OU:[5,54]NCTCTL.TSK/PU/NM
>MAC @OU:[5,24]RTHASM.CMD
>TKB @OU:[5,24]RTHBLD.CMD
>PIP OU:[5,24]RTHTAB.OBJ/PU/NM
>PIP OU:[5,54]RTH.DAT/NV=IN:[140,24]RTH.DAT
>PIP OU:[5,54]RTH.TSK/PU/NM,RTH.STB,RTH.DAT
>PIP OU:[5,54]RTHTAB.TSK/PU/NM,RTHTAB.STB
>TKB @OU:[5,24]TLKBLD.CMD
>PIP OU:[5,54]TLKRES.TSK/PU/NM
>PIP OU:[5,54]/NV/CO=IN:[133,54]LSN.TSK
>PIP OU:[5,54]LSN.TSK/PU/NM
>PIP OU:[5,54]/NV/CO=IN:[133,54]PHONE.TSK
>PIP OU:[5,54]PHONE.TSK/PU/NM
>SET /UIC=[1,2]
>PIP OU:[1,2]/NV=IN:[133,10]PHONEHELP.HLP
>PIP OU:[1,2]PHONEHELP.HLP/PU
>SET /UIC=[5,24]
>PIP OU:[5,54]/NV/CO=IN:[135,54]LCP.TSK
>PIP OU:[5,54]/NV/CO=IN:[131,54]LAT.TSK,LAT.STB
>PIP OU:[5,54]/NV/CO=IN:[131,54]LAT1.TSK,LAT1.STB
>PIP OU:[5,54]/NV/CO=IN:[131,54]LTD.TSK,LTD.STB
>PIP OU:[5,54]/NV/CO=IN:[131,54]LTD1.TSK,LTD1.STB
>PIP OU:[5,54]LAT.DAT/NV=IN:[131,24]LAT.DAT
>PIP OU:[5,54]LTD.DAT/NV=IN:[131,24]LTD.DAT
>PIP OU:[5,54]LAT.TSK/PU/NM,LAT.STB,LAT.DAT
>PIP OU:[5,54]LAT1.TSK/PU/NM,LAT1.STB
>PIP OU:[5,54]LTD.TSK/PU/NM,LTD.STB
>PIP OU:[5,54]LTD1.TSK/PU/NM,LTD1.STB
>PIP OU:[5,54]LTD.DAT/PU/NM
>PIP OU:[5,54]LCP.TSK/PU/NM
>MAC @OU:[5,24]TCLASM.CMD
>PIP OU:[5,24]TCLPWD.OBJ/PU/NM
>TKB @OU:[5,24]TCLBLD.CMD
>PIP OU:[5,54]TCL.TSK/PU/NM
>;
>; =====================================================================
>; NET - Section 10 - Generation Clean Up
>; =====================================================================
>;
>; Creating NETCFG.TXT, the network configuration description file.
>; Creating NETCFE.CMD, the network configuration command file.
>; Creating NETINS.CMD, the network installation command file.
>; Creating NETREM.CMD, the network removal command file.
>;
>;
>; The network HELP file library has been placed on your target disk, as:
>;
>; SY:[1,2]NETHLP.ULB
>;
>; This file should be moved to your target systems library device (LB:).
>;
>;
>; =====================================================================
>; NET - RSX-11M-PLUS CEX System Generation Procedure
>; Stopped at 17:25:56 on 20-NOV-16
>; =====================================================================
>;
>@ <EOF>
>
>
>R $SHUTUP
MCR -- Illegal function
>run $shutup
RSX-11M-PLUS Shut down program
Enter minutes to wait before shutdown: 0
Reason for shutdown (<CR> for none):
OK to shutdown? [Y/N]: y
All further logins are disabled
20-NOV-16 17:27 System is now shutting down -- JUICHI
QUE /STO:QMG
>
STOP/ACCOUNTING SHUTUP
17:27:29 SYSLOG -- 47. Exiting
>
@LB:[1,2]SHUTUP
>VCP DISCONNECT /ALL
>@ <EOF>
>
ELI /NOLOG
>
ACS DB0:/BLKS=0.
ACS -- Checkpoint file now inactive
>
DMO DB0:/DEV/LOCK=V
DMO -- System disk being dismounted
DMO -- SYSTEM dismounted from DB0: *** Final dismount initiated ***
17:27:30 *** DB0: -- Dismount complete
>
SHUTUP operation complete
HALT instruction, PC: 126130 (CLRB @#177776)
sim> quit
Goodbye
Eth: closed tap2
[openvms@sanyalnet-cloud-vps2 pdp11]$
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment