Created
March 9, 2019 04:44
-
-
Save tuklusan/e7fecafecb077637da6c8ff0002c35a0 to your computer and use it in GitHub Desktop.
RSTS/E 10.1 with DECnet/E 4.1 on SIMH | DECnet/E installation | See https://supratim-sanyal.blogspot.com/2019/03/deploying-pdp-1173-running-rstse-101.html for deails
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| localuser@opensuse:~/PDP-11> | |
| localuser@opensuse:~/PDP-11> cat rsts.ini | |
| set cpu 11/73, 4M, idle | |
| set clk 50Hz | |
| show cpu | |
| set hk disable | |
| set ptr disable | |
| set ptp disable | |
| set rk disable | |
| set rp disable | |
| set rx disable | |
| set vh disable | |
| set tm disable | |
| set cr disable | |
| set lpt disable | |
| set rl disable | |
| ; disk drives | |
| set rq enable | |
| set rq0 ra81 | |
| set rq1 ra81 | |
| set rq2 disable | |
| set rq3 disable | |
| ;set rq2 rd31 | |
| ;set rq3 rd31 | |
| attach rq0 Disks/rq0-ra81a.dsk | |
| attach rq1 Disks/rq1-ra81b.dsk | |
| ;attach rq2 Disks/rq2-rd31a.dsk | |
| ;attach rq3 Disks/rq3-rd31b.dsk | |
| ;set console telnet=10003 | |
| ; DZ11, KB5:-KB12: | |
| echo DZ11-->10000 | |
| echo | |
| set dz lines=8 | |
| ; make SIMH listen on port 10000 | |
| att dz 10000 | |
| ; tape drives | |
| set tq0 locked | |
| set tq1 disable | |
| set tq2 disable | |
| set tq3 disable | |
| ;set tq1 locked | |
| ;set tq2 locked | |
| ;set tq3 locked | |
| ;attach -e tq0 tapes/rstse_v10_1_install_sep10_1992.tap | |
| attach -e tq0 -f tpc tapes/decnet-e_v4_1.tap | |
| ;attach -e tq1 -f tpc tapes/... | |
| ;attach -e tq2 -f tpc tapes/... | |
| ;attach -e tq3 -f tpc tapes/... | |
| ; DECnet 31.28 | |
| set xq enable | |
| set xq type=DELQA mac=AA-00-04-00-1C-7C | |
| att xq tap:dnettap0 | |
| ;set xqb enable | |
| set xqb disable | |
| set xqb type=DEQNA mac=96-72-A1-2A-E7-40 | |
| ;attach xqb ... | |
| boot rq0 | |
| localuser@opensuse:~/PDP-11> | |
| localuser@opensuse:~/PDP-11> | |
| localuser@opensuse:~/PDP-11> | |
| localuser@opensuse:~/PDP-11> | |
| localuser@opensuse:~/PDP-11> | |
| localuser@opensuse:~/PDP-11> ./rsts | |
| PDP-11 simulator V4.0-0 Current git commit id: 314a1da9 | |
| Disabling RK | |
| Disabling HK | |
| Disabling TM | |
| CPU 11/73, NOCIS, autoconfiguration enabled, idle enabled | |
| 4088KB | |
| DZ11-->10000 | |
| /home/localuser/PDP-11/rsts.ini-37> att dz 10000 | |
| Listening on port 10000 | |
| /home/localuser/PDP-11/rsts.ini-56> att xq tap:dnettap0 | |
| libpcap version 1.9.0 (with TPACKET_V3) | |
| Eth: opened OS device dnettap0 | |
| RSTS V10.1-L MICRO (DU0) INIT V10.1-0L | |
| Today's date? 8-MAR-19 | |
| Current time? 22:57 | |
| Start timesharing? <Yes> | |
| Size of monitor has changed from 74K to 79K. | |
| Adjusting memory table. | |
| Memory allocation table: | |
| 0K: 00000000 - 00473777 ( 79K) : EXEC | |
| 79K: 00474000 - 15523777 (1670K) : USER | |
| 1749K: 15524000 - 17757777 ( 295K) : XBUF | |
| Memory available to RSTS/E is 2044K words. | |
| 08-Mar-19 10:57 PM | |
| 7 devices disabled | |
| Proceed with system startup? <YES> | |
| Beginning RSTS/E system startup... | |
| 08-Mar-19 10:57 PM Installing monitor overlays | |
| 08-Mar-19 10:57 PM Mounting disks | |
| 08-Mar-19 10:57 PM Assigning logical names | |
| 08-Mar-19 10:57 PM Starting error logging | |
| 08-Mar-19 10:57 PM Setting system characteristics | |
| 08-Mar-19 10:57 PM Installing run-time systems and libraries | |
| 08-Mar-19 10:57 PM Starting Operator/Message Services | |
| >>>>>>>>>>>>>>> OMS V10.1-A 08-Mar-19 10:57 PM <<<<<<<<<<<<<<< | |
| Message 4 from OMS, user [1,2], Detached, job 3 | |
| Starting Operator/Message Services | |
| 08-Mar-19 10:57 PM Setting terminal characteristics | |
| 08-Mar-19 10:57 PM Defining system commands | |
| 08-Mar-19 10:57 PM Setting printer characteristics | |
| 08-Mar-19 10:57 PM Starting spoolers | |
| *** From [1,2] "[ 1, 2]" on KB0: at 10:57 PM 08-Mar-19 | |
| ** RSTS/E is on the air... | |
| >>>>>>>>>>>>>>> OMS V10.1-A 08-Mar-19 10:57 PM <<<<<<<<<<<<<<< | |
| Message 5 from user [1,2] on _KB0:, job 2 | |
| The system startup is complete | |
| RSTS V10.1-L 08-Mar-19 10:57 PM | |
| User: 1,2 | |
| Password: | |
| Jobs detached under this account: | |
| Job What Size State Run-time RTS | |
| 1 ERRCPY 5K SR 0.3 ...RSX | |
| 3 OMS 9K SL 0.0 ...RSX | |
| 4 PBS... 19K SL 0.0 ...RSX | |
| Job number to attach to? | |
| Last interactive login on 08-Mar-19, 10:57 PM at KB0: | |
| Last non-interactive login on 08-Mar-19, 10:57 PM | |
| 3 other users are logged in under this account | |
| $ | |
| $ | |
| $ show dev | |
| Device _DV0: Status: Disabled by INIT | |
| Device _DL0: Control RL: Status: Disabled by INIT | |
| Device _DL1: Control RL: Status: Disabled by INIT | |
| Device _DL2: Control RL: Status: Disabled by INIT | |
| Device _DL3: Control RL: Status: Disabled by INIT | |
| Device _DU0: Control RU0: CSR 772150 Status: Mounted | |
| Device _DU1: Control RU0: CSR 772150 | |
| Device _DU2: Control RU: Status: Non-existent | |
| Device _DU3: Control RU: Status: Non-existent | |
| Device _DU4: Control RU: Status: Non-existent | |
| Device _DU5: Control RU: Status: Non-existent | |
| Device _DU6: Control RU: Status: Non-existent | |
| Device _DU7: Control RU: Status: Non-existent | |
| Device _DU8: Control RU: Status: Non-existent | |
| Device _DU9: Control RU: Status: Non-existent | |
| Device _DU10: Control RU: Status: Non-existent | |
| Device _DU11: Control RU: Status: Non-existent | |
| Device _DU12: Control RU: Status: Non-existent | |
| Device _DU13: Control RU: Status: Non-existent | |
| Device _DU14: Control RU: Status: Non-existent | |
| Device _DU15: Control RU: Status: Non-existent | |
| Device _KB0: (KBA0:) Control TT0: CSR 777560 Status: Restricted | |
| Device _KB1: (KBD0:) Control PK0: Status: Restricted | |
| Device _KB2: (KBD1:) Control PK1: Status: Restricted | |
| Device _KB3: (KBD2:) Control PK2: Status: Restricted | |
| Device _KB4: (KBD3:) Control PK3: Status: Restricted | |
| Device _KB5: (KBG0:) Control DZ0:0 CSR 760100 Status: Restricted | |
| Device _KB6: (KBG1:) Control DZ0:1 CSR 760100 Status: Restricted | |
| Device _KB7: (KBG2:) Control DZ0:2 CSR 760100 Status: Restricted | |
| Device _KB8: (KBG3:) Control DZ0:3 CSR 760100 Status: Restricted | |
| Device _KB9: (KBG4:) Control DZ0:4 CSR 760100 Status: Restricted | |
| Device _KB10: (KBG5:) Control DZ0:5 CSR 760100 Status: Restricted | |
| Device _KB11: (KBG6:) Control DZ0:6 CSR 760100 Status: Restricted | |
| Device _KB12: (KBG7:) Control DZ0:7 CSR 760100 Status: Restricted | |
| Device _KB13: (KBG8:) Control DZ1:0 CSR 760110 Status: Restricted | |
| Device _KB14: (KBG9:) Control DZ1:1 CSR 760110 Status: Restricted | |
| Device _KB15: (KBG10:) Control DZ1:2 CSR 760110 Status: Restricted | |
| Device _KB16: (KBG11:) Control DZ1:3 CSR 760110 Status: Restricted | |
| Device _KB17: (KBG12:) Control DZ1:4 CSR 760110 Status: Restricted | |
| Device _KB18: (KBG13:) Control DZ1:5 CSR 760110 Status: Restricted | |
| Device _KB19: (KBG14:) Control DZ1:6 CSR 760110 Status: Restricted | |
| Device _KB20: (KBG15:) Control DZ1:7 CSR 760110 Status: Restricted | |
| Device _NL0: | |
| Device _PK0: | |
| Device _PK1: | |
| Device _PK2: | |
| Device _PK3: | |
| Device _XH0: (DELQA) Control QNA-0 CSR 774456 Def Addr: AA-00-04-00-1C-7C | |
| Device _LP0: Control LP0: Status: Disabled by INIT | |
| Device _MS0: Control TS11 Status: Disabled by INIT | |
| Device _MU0: CSR 774500 | |
| Device _MU1: Status: Disabled by INIT | |
| $ | |
| $ | |
| $ | |
| $ | |
| $ show dev _XH0: | |
| Device _XH0: (DELQA) Control QNA-0 CSR 774456 Def Addr: AA-00-04-00-1C-7C | |
| $ | |
| $ | |
| $ | |
| $ | |
| $ | |
| $ | |
| $ @[0,1]install layered | |
| Deleting all global symbols | |
| Z[r[2J[H[0m[7m[1m RSTS/E V10.1-L Software Installation Procedure [0m | |
| 7[1;61H[7m[1m08-Mar-19 10:57 PM 8[0m[5;20r[6H[7m[1m[2;1H [2;78H [0m | |
| 7[3H[K[7m[1m Dialogue Phase 8[0m | |
| 7[3H[K[7m[1m Dialogue Phase 8[0m[5H[J | |
| During this installation procedure you may: | |
| Type '?' for help | |
| Type '^' to go back to the previous question in the present section | |
| Type CTRL/Z to return to the beginning of the present section | |
| You cannot return to a previous section | |
| 7[3H[K[7m[1m Dialogue Phase 8[0m | |
| 7[22H[K[1mAre you ready to proceed? <yes> | |
| [21H[J8[0m[5H[J7[3H[K[7m[1m Dialogue Phase 8[0m | |
| Product names: | |
| BP2 DIBOL FRTRN77 PLXY 3271 | |
| C81 DTR MAIL RJ2780 | |
| DECDX FMS MENU WPS | |
| DECNET FORTRAN PDPDBG 2780 3780 | |
| Enter a product name, multiple names separated by commas, or ALL. | |
| Enter ALL,NOprod[,...] to transfer all product updates except prod. | |
| 7[22H[K[1mProducts to install: | |
| [21H[J8[0m | |
| 7[22H[K[1mPatch account? <PATCH$:> | |
| [21H[J8[0m | |
| [5H[J | |
| The following will be installed: | |
| BP2 C81 DECDX DECNET | |
| DIBOL DTR FMS FORTRAN | |
| FRTRN77 MAIL MENU PDPDBG | |
| PLXY RJ2780 WPS 27803780 | |
| 3271 | |
| You may answer "Yes" to accept this list, or "No" to change it. | |
| 7[22H[K[1mIs this list OK? <yes> | |
| [21H[J8[0m | |
| Please enter the name and unit number of the disk to | |
| which you want to install the software. This disk | |
| should be physically mounted and write-enabled. | |
| 7[22H[K[1mTarget disk? <_SY:> | |
| [21H[J8[0m[5H[J | |
| Assigning system logicals | |
| 7[3H[K[7m[1m Dialogue Phase 8[0mThis is the end of the DIALOGUE phase. | |
| The next phase is the BUILD phase. | |
| 7[22H[K[1mAre you ready to proceed? <yes> | |
| [21H[J8[0m7[3H[K[7m[1m Build Phase 8[0m[5H[J | |
| 7[3H[K[7m[1m Build Phase 8[0m7[1;61H[7m[1m08-Mar-19 10:58 PM 8[0m[r[2J[H[0m[7m[1m RSTS/E V10.1-L Software Installation Procedure [0m | |
| 7[1;61H[7m[1m08-Mar-19 10:58 PM 8[0m[5;20r[6H[7m[1m[2;1H [2;78H [0m | |
| 7[3H[K[7m[1m Build Phase 8[0m7[1;61H[7m[1m08-Mar-19 10:58 PM 8[0m[5H[J | |
| Please mount the BP2 Library media and enter the | |
| name and unit number of the device. | |
| Valid device types are: 'MM', 'MS', 'MT', 'MU', 'DM' or 'DL' | |
| 7[22H[K[1mBP2 Library device? <_MU0:> | |
| [21H[J8[0m?ID labels don't match | |
| ? 7[21H[K[7m?Unable to mount media8[0m | |
| 7[22H[K[1mBP2 Library device? <_MU0:> | |
| [21H[J8[0m?ID labels don't match | |
| ? 7[21H[K[7m?Unable to mount media8[0m | |
| 7[22H[K[1mBP2 Library device? <_MU0:> | |
| [21H[J8[0m?ID labels don't match | |
| ? 7[21H[K[7m?Unable to mount media8[0m | |
| 7[22H[K[1mBP2 Library device? <_MU0:> ^Z | |
| [21H[J8[0m[5H[J | |
| Please mount the BP2 Library media and enter the | |
| name and unit number of the device. | |
| Valid device types are: 'MM', 'MS', 'MT', 'MU', 'DM' or 'DL' | |
| 7[22H[K[1mBP2 Library device? <_MU0:> ^C | |
| 7[3H[K[7m[1m Aborting 8[0m | |
| 7[r8[0mDeleting all global symbols | |
| Deassigning system logicals | |
| 08-Mar-19 10:58 PM | |
| System tape label default set to DOS | |
| SY:[1,2]INSTAL.LOG is a log file of this session | |
| $ | |
| $ | |
| $ | |
| $ | |
| $ | |
| $ | |
| $ | |
| $ | |
| $ | |
| $ | |
| $ | |
| $ | |
| $ | |
| $ | |
| $ | |
| $ | |
| $ | |
| $ @[1, 0,1]install layered | |
| Deleting all global symbols | |
| Z[r[2J[H[0m[7m[1m RSTS/E V10.1-L Software Installation Procedure [0m | |
| 7[1;61H[7m[1m08-Mar-19 10:58 PM 8[0m[5;20r[6H[7m[1m[2;1H [2;78H [0m | |
| 7[3H[K[7m[1m Dialogue Phase 8[0m | |
| 7[3H[K[7m[1m Dialogue Phase 8[0m[5H[J | |
| During this installation procedure you may: | |
| Type '?' for help | |
| Type '^' to go back to the previous question in the present section | |
| Type CTRL/Z to return to the beginning of the present section | |
| You cannot return to a previous section | |
| 7[3H[K[7m[1m Dialogue Phase 8[0m | |
| 7[22H[K[1mAre you ready to proceed? <yes> | |
| [21H[J8[0m[5H[J7[3H[K[7m[1m Dialogue Phase 8[0m | |
| Product names: | |
| BP2 DIBOL FRTRN77 PLXY 3271 | |
| C81 DTR MAIL RJ2780 | |
| DECDX FMS MENU WPS | |
| DECNET FORTRAN PDPDBG 2780 3780 | |
| Enter a product name, multiple names separated by commas, or ALL. | |
| Enter ALL,NOprod[,...] to transfer all product updates except prod. | |
| 7[22H[K[1mProducts to install: DECNET | |
| [21H[J8[0m | |
| 7[22H[K[1mPatch account? <PATCH$:> | |
| [21H[J8[0m | |
| [5H[J | |
| The following will be installed: | |
| DECNET | |
| You may answer "Yes" to accept this list, or "No" to change it. | |
| 7[22H[K[1mIs this list OK? <yes> | |
| [21H[J8[0m | |
| Please enter the name and unit number of the disk to | |
| which you want to install the software. This disk | |
| should be physically mounted and write-enabled. | |
| 7[22H[K[1mTarget disk? <_SY:> | |
| [21H[J8[0m[5H[J | |
| Assigning system logicals | |
| 7[3H[K[7m[1m Dialogue Phase 8[0mThis is the end of the DIALOGUE phase. | |
| The next phase is the BUILD phase. | |
| 7[22H[K[1mAre you ready to proceed? <yes> | |
| [21H[J8[0m7[3H[K[7m[1m Build Phase 8[0m[5H[J | |
| 7[3H[K[7m[1m Build Phase 8[0m7[1;61H[7m[1m08-Mar-19 10:58 PM 8[0m[r[2J[H[0m[7m[1m RSTS/E V10.1-L Software Installation Procedure [0m | |
| 7[1;61H[7m[1m08-Mar-19 10:58 PM 8[0m[5;20r[6H[7m[1m[2;1H [2;78H [0m | |
| 7[3H[K[7m[1m Build Phase 8[0m7[1;61H[7m[1m08-Mar-19 10:58 PM 8[0m[5H[J | |
| Please mount the DECNET Library media and enter the | |
| name and unit number of the device. | |
| Valid device types are: 'MM', 'MS', 'MT', 'MU', 'DM' or 'DL' | |
| 7[22H[K[1mDECNET Library device? <_MU0:> | |
| [21H[J8[0m | |
| Deleting previous versions of DECnet/E software | |
| This activity may take a few minutes - please be patient | |
| Installing required components - please wait | |
| Do you want to install the HELP files for NCP? (YES/NO) <YES> | |
| Installing resident library versions of NFT and FAL | |
| DECnet/E components successfully installed | |
| The following information is required to complete this phase: | |
| Maximum area number in your network | |
| Maximum number of nodes in your network | |
| Please consult the DECnet/E Installation and Update Guide or | |
| the DECnet/E System Manager's Guide if you need additional help. | |
| Maximum area number in your network? (1-63) <1> 63 | |
| Maximum number of nodes in your network? (1-26000) <256> 3000 | |
| Creating DECnet/E parameter file | |
| DECnet/E parameter file successfully created | |
| Checking for network devices | |
| This activity may take a few minutes - please be patient | |
| The following information is required to complete this phase: | |
| Name of the executor node | |
| Address of the executor node | |
| DECnet default account information | |
| Please consult the DECnet/E Installation and Update Guide or | |
| the DECnet/E System Manager's Guide if you need additional help. | |
| Beginning parameter file configuration | |
| Name of the executor node? (1-6 characters, e.g. ALPHA) RST101 | |
| Address of the executor node? (area.node, e.g. 1.25) 31.28 | |
| Do you want a DECnet default account? (YES/NO) <YES> | |
| DECnet default account PPN? ([project-number,programmer-number]) | |
| ?You have entered an invalid response | |
| You must enter a PPN for the account in the form | |
| [project-number,programmer-number] - for example [219,10]. | |
| The project number and programmer number must each be | |
| decimal numbers in the range 1 to 254. | |
| DECnet default account PPN? ([project-number,programmer-number]) [219 319. 50 [50,1] | |
| Account [50,1] has been created to be the default DECnet account | |
| Only 1 circuit is defined on this node. The node will be defined as | |
| an end node unless you enter YES in response to the following | |
| prompt | |
| Do you want to define this node as a router? (YES/NO) <NO> | |
| Beginning DECnet/E V4.1 object definitions | |
| DECnet/E V4.1 object definitions completed | |
| Parameter file configuration completed | |
| Beginning DECnet/E start-up file creation | |
| A new DECnet/E start-up file has been created for you. To view the | |
| contents of the file, type or print DECNET$:DSTART.COM following | |
| completion of the installation. To use this file, add the following | |
| command to START.COM or enter it at the $ prompt whenever you want | |
| to restart DECnet/E: | |
| $ @DECNET$:DSTART | |
| To complete DECnet/E installation and testing, the system must | |
| be shut down and restarted to load the required DECnet/E monitor | |
| code. The SHUTUP program will be invoked to control the shutdown | |
| process. Please consult the RSTS/E System Manager's Guide if you | |
| are unfamiliar with SHUTUP. | |
| Are you ready to proceed with system shutdown? (YES/NO) <YES> | |
| %DECnet/E requires 4K words of XBUF to run as currently configured. | |
| If the current XBUF allocation is insufficient to handle the additional | |
| requirements of DECnet/E, change the memory defaults to provide the | |
| additional XBUF needed before restarting the system. Please consult | |
| the RSTS/E System Installation and Update Guide if you need additional | |
| help. | |
| Closing DECnet/E installation log file and running SHUTUP | |
| SHUTUP V10.1-H RSTS V10.1-L RSTS/E V10.1 | |
| 11:00 PM 08-Mar-19 ######## Set-up Dialogue Phase ######## | |
| Type '^' to any query to backup one question | |
| Allow Print/Batch Services jobs to complete <YES>? | |
| Minutes until system shutdown (0-99) <5>? 0 | |
| Shutdown with automatic RESTART <NO>? yes | |
| 11:00 PM 08-Mar-19 ######## Warning Message Phase ######## | |
| Further LOGINs are now disabled | |
| 11:00 PM 08-Mar-19 ######## Initial Job Killing Phase ######## | |
| 11:00 PM 08-Mar-19 ######## Print/Batch Shutdown Phase ######## | |
| Print/Batch Services shutdown complete at 11:01 PM | |
| 11:01 PM 08-Mar-19 ######## OMS Shutdown Phase ######## | |
| >>>>>>>>>>>>>>> OMS V10.1-A 08-Mar-19 11:01 PM <<<<<<<<<<<<<<< | |
| Message 6 from SHUTUP, operator [1,2] on _KB0:, job 2 | |
| Operator/Message Services shutting down | |
| Operator/Message Services shutdown complete at 11:01 PM | |
| 11:01 PM 08-Mar-19 ######## EVTLOG Shutdown Phase ######## | |
| 11:01 PM 08-Mar-19 ######## ERRCPY Shutdown Phase ######## | |
| 11:01 PM 08-Mar-19 ######## Remove RTS/RES LIB Phase ######## | |
| 11:01 PM 08-Mar-19 ######## Log File Closing Phase ######## | |
| 11:01 PM 08-Mar-19 ######## SWAP File Removal Phase ######## | |
| 11:01 PM 08-Mar-19 ######## Disk DISMOUNT Phase ######## | |
| 11:01 PM 08-Mar-19 ######## Final Shutdown Phase ######## | |
| Please wait for system to re-boot itself | |
| RSTS V10.1-L MICRO (DU0) INIT V10.1-0L | |
| 08-Mar-19 11:01 PM | |
| Size of monitor has changed from 79K to 92K. | |
| Adjusting memory table. | |
| Memory allocation table: | |
| 0K: 00000000 - 00557777 ( 92K) : EXEC | |
| 92K: 00560000 - 15523777 (1657K) : USER | |
| 1749K: 15524000 - 17757777 ( 295K) : XBUF | |
| Memory available to RSTS/E is 2044K words. | |
| 7 devices disabled | |
| Continuing DECnet/E installation | |
| Event type 2.0, Local node state change | |
| Occurred 23-Feb-32 23:01:03.1 on node 31.28 (RST101) | |
| Reason for state change: Operator command | |
| Old node state = Off | |
| New node state = On | |
| Shutting down EVTLOG by operator request. | |
| Creating data file for network testing | |
| This activity may take a few minutes - please be patient | |
| Do you want to run the local node tests? (YES/NO) <YES> | |
| Beginning DECnet/E local node testing | |
| DECnet/E local node testing successfully completed | |
| DECNET$:DTESTL.LOG is a log file of local node testing | |
| Please check this file to verify the results | |
| Do you want to run the adjacent node test? (YES/NO) <YES> | |
| Beginning adjacent node testing for circuit QNA-0 | |
| Circuit QNA-0 adjacent node testing completed. | |
| Adjacent node testing completed | |
| DECNET$:DTESTA.LOG is a log file of adjacent node testing. | |
| Please check this file to verify the results. | |
| Do you want to define any remote nodes? (YES/NO) <YES> | |
| Name of node? (Or press RETURN to quit) imp\pmi\ | |
| IMPVAX | |
| Address of node IMPVAX? (area.node, e.g. 1.25) 31.1 | |
| Node IMPVAX defined at address 31.1 | |
| Name of node? (Or press RETURN to quit) IMPRTR | |
| Address of node IMPRTR? (area.node, e.g. 1.25) 31.1023 | |
| Node IMPRTR defined at address 31.1023 | |
| Name of node? (Or press RETURN to quit) | |
| Are you finished defining nodes for your network? (YES or NO) <YES> | |
| 08-Mar-19 11:02 PM Starting up DECnet/E V4.1 | |
| DECnet/E installation completed | |
| * End of build phase * | |
| Deleting all global symbols | |
| Deassigning system logicals | |
| 08-Mar-19 11:02 PM | |
| System tape label default set to DOS | |
| SY:[1,2]INSTAL.LOG is a log file of this session | |
| Continuing system startup | |
| Proceed with system startup? <YES> | |
| Event type 4.15, Adjacency up | |
| Occurred 23-Feb-32 23:02:09.5 on node 31.28 (RST101) | |
| Circuit QNA-0 | |
| Node address = 31.1023 (IMPRTR) | |
| Beginning RSTS/E system startup... | |
| 08-Mar-19 11:02 PM Installing monitor overlays | |
| 08-Mar-19 11:02 PM Mounting disks | |
| 08-Mar-19 11:02 PM Assigning logical names | |
| 08-Mar-19 11:02 PM Starting error logging | |
| 08-Mar-19 11:02 PM Setting system characteristics | |
| 08-Mar-19 11:02 PM Installing run-time systems and libraries | |
| 08-Mar-19 11:02 PM Starting Operator/Message Services | |
| >>>>>>>>>>>>>>> OMS V10.1-A 08-Mar-19 11:02 PM <<<<<<<<<<<<<<< | |
| Message 7 from OMS, user [1,2], Detached, job 4 | |
| Starting Operator/Message Services | |
| 08-Mar-19 11:02 PM Setting terminal characteristics | |
| 08-Mar-19 11:02 PM Defining system commands | |
| 08-Mar-19 11:02 PM Setting printer characteristics | |
| 08-Mar-19 11:02 PM Starting spoolers | |
| 08-Mar-19 11:02 PM Starting up DECnet/E V4.1 | |
| ?Command not unique | |
| ?Command not unique | |
| ?Command not unique | |
| ?Command not unique | |
| ?Can't SET SYSTEM - System already SET?Listener response - Component in wrong state, Circuit | |
| *** From RST101::[1,2] "[ 1, 2]" on KB0: at 11:02 PM 08-Mar-19 | |
| ** RSTS/E is on the air... | |
| >>>>>>>>>>>>>>> OMS V10.1-A 08-Mar-19 11:02 PM <<<<<<<<<<<<<<< | |
| Message 8 from user [1,2] on _KB0:, job 3 | |
| The system startup is complete | |
| RSTS V10.1-L 08-Mar-19 11:02 PM | |
| User: 1.\.\2\2\,2 | |
| Password: | |
| Jobs detached under this account: | |
| Job What Size State Run-time RTS | |
| 1 ERRCPY 5K SR 0.2 ...RSX | |
| 2 EVTLOG 18K SL 0.0 ...RSX | |
| 4 OMS 9K SL 0.0 ...RSX | |
| 5 PBS... 19K SL 0.0 ...RSX | |
| Job number to attach to? | |
| Last interactive login on 08-Mar-19, 11:01 PM at KB0: | |
| Last non-interactive login on 08-Mar-19, 11:02 PM | |
| 4 other users are logged in under this account | |
| $ | |
| $ | |
| $ | |
| $ mc ncp | |
| mc ncp | |
| ^ | |
| ?Invalid command | |
| $ ncp | |
| NCP> | |
| NCP>show exec | |
| Node Volatile Summary as of 8-MAR-19 23:02:42 | |
| Executor Node = 31.28 (RST101) | |
| State = On | |
| Identification = DECnet/E V4.1 | |
| Active Links = 0 | |
| NCP> | |
| NCP> | |
| NCP>show adjacent nodes | |
| ?Invalid command - SHOW \\ADJACENT NODES\\ | |
| NCP>show k\k wohs\ | |
| NCP> | |
| NCP>show active circ | |
| Active Circuit Volatile Summary as of 8-MAR-19 23:03:04 | |
| Circuit = QNA-0 | |
| State = On | |
| Adjacent Node = 31.1023 (IMPRTR) | |
| NCP> | |
| NCP>show active circui char | |
| Active Circuit Volatile Characteristics as of 8-MAR-19 23:03:13 | |
| Circuit = QNA-0 | |
| State = On | |
| Cost = 1 | |
| Hello Timer = 45 | |
| Originating Queue Limit = 5 | |
| Listen Timer = 90 | |
| Owner = 31.28 (RST101) | |
| Line = QNA-0 | |
| Protocol Type = Ethernet | |
| Router Priority = 64 | |
| Autorestart = On | |
| NCP>define circuit qna-0 hello 15 | |
| ?Invalid command - DEFINE CIRCUIT QNA-0 \\HELLO 15\\ | |
| NCP>set circuit qna-0 hello 15 | |
| ?Invalid command - SET CIRCUIT QNA-0 \\HELLO 15\\ | |
| NCP>help set | |
| Programs | |
| NCP | |
| SET | |
| Use the SET command to create or modify parameters or components in the | |
| volatile database on the executor node. Use the DEFINE command to | |
| create or modify parameters or components in the permanent database on | |
| the executor node. | |
| Additional help is available on: | |
| CIRCUIT EXECUTOR LINE LOGGING | |
| NODE OBJECT | |
| Programs NCP SET Subtopic? circ | |
| Programs | |
| NCP | |
| SET | |
| CIRCUIT | |
| Use the SET CIRCUIT command to create or modify circuit parameters in | |
| the volatile database. Use the DEFINE CIRCUIT command to create or | |
| modify permanent circuit parameters. | |
| SET KNOWN CIRCUITS (parameters ...) | |
| CIRCUIT circuit-id | |
| Additional help is available on: | |
| KNOWN CIRCUITS CIRCUIT circuit-id ALL | |
| AUTORESTART COST HELLO TIMER MAXIMUM ROUTERS | |
| ORIGINATING QUEUE LIMIT OWNER EXECUTOR RECALL TIMER | |
| ROUTER PRIORITY STATE TRIBUTARY Examples | |
| Programs NCP SET CIRCUIT Subtopic? | |
| PROGRAMS NCP SET Subtopic? | |
| PROGRAMS NCP Subtopic? | |
| PROGRAMS Subtopic? | |
| Topic? | |
| NCP> | |
| NCP>define circuit qna-0 hello timer 15 | |
| NCP>set circuit qna-0 hello timer 15 | |
| NCP>define circuit qna-0 cost 4 | |
| NCP>set circuit qna-0 cost 4 | |
| NCP>copy known nodes from impvax to both with purge | |
| ?Invalid command - \\COPY KNOWN NODES FROM IMPVAX TO BOTH WITH PURGE\\ | |
| NCP> | |
| NCP>help copy | |
| Programs | |
| NCP | |
| Sorry, no help available on COPY at this level | |
| Help is available on: | |
| ABORT CLEAR Commands DEFINE | |
| EVENTS EXIT HELP LIST | |
| LOOP PARAMETERS PURGE SET | |
| SHOW TELL ZERO | |
| Programs NCP Subtopic? | |
| PROGRAMS Subtopic? | |
| Topic? | |
| NCP> | |
| NCP> | |
| NCP>exit | |
| $ | |
| $ | |
| $ show network | |
| Active Node Volatile Summary as of 8-MAR-19 23:04:44 | |
| Executor Node = 31.28 (RST101) | |
| State = On | |
| Identification = DECnet/E V4.1 | |
| Active Links = 0 | |
| Remote Node = 31.1023 (IMPRTR) | |
| Circuit = QNA-0 | |
| Next Node = 31.1023 (IMPRTR) | |
| $ | |
| $ run $shutdown | |
| run $shutdown | |
| ^ | |
| ?File does not exist | |
| $ run $shutup | |
| SHUTUP V10.1-H RSTS V10.1-L RSTS/E V10.1 | |
| 11:04 PM 08-Mar-19 ######## Set-up Dialogue Phase ######## | |
| Type '^' to any query to backup one question | |
| Allow Print/Batch Services jobs to complete <YES>? | |
| Minutes until system shutdown (0-99) <5>? 0 | |
| Shutdown with automatic RESTART <NO>? | |
| 11:05 PM 08-Mar-19 ######## Warning Message Phase ######## | |
| Further LOGINs are now disabled | |
| Further network activity is now disabled | |
| 11:05 PM 08-Mar-19 ######## DECNET Shutdown Phase ######## | |
| 11:05 PM 08-Mar-19 ######## Initial Job Killing Phase ######## | |
| 11:05 PM 08-Mar-19 ######## Print/Batch Shutdown Phase ######## | |
| Event type 2.0, Local node state change | |
| Occurred 23-Feb-32 23:05:00.9 on node 31.28 (RST101) | |
| Reason for state change: Operator command | |
| Old node state = On | |
| New node state = Off | |
| Print/Batch Services shutdown complete at 11:05 PM | |
| 11:05 PM 08-Mar-19 ######## OMS Shutdown Phase ######## | |
| >>>>>>>>>>>>>>> OMS V10.1-A 08-Mar-19 11:05 PM <<<<<<<<<<<<<<< | |
| Message 9 from SHUTUP, operator [1,2] on _KB0:, job 3 | |
| Operator/Message Services shutting down | |
| Operator/Message Services shutdown complete at 11:05 PM | |
| 11:05 PM 08-Mar-19 ######## EVTLOG Shutdown Phase ######## | |
| Shutting down EVTLOG by operator request. | |
| 11:05 PM 08-Mar-19 ######## ERRCPY Shutdown Phase ######## | |
| 11:05 PM 08-Mar-19 ######## Remove RTS/RES LIB Phase ######## | |
| 11:05 PM 08-Mar-19 ######## Log File Closing Phase ######## | |
| 11:05 PM 08-Mar-19 ######## SWAP File Removal Phase ######## | |
| 11:05 PM 08-Mar-19 ######## Disk DISMOUNT Phase ######## | |
| 11:05 PM 08-Mar-19 ######## Final Shutdown Phase ######## | |
| Please wait for system to re-boot itself | |
| RSTS V10.1-L MICRO (DU0) INIT V10.1-0L | |
| 08-Mar-19 11:05 PM | |
| Start timesharing? <Yes> | |
| 7 devices disabled | |
| Proceed with system startup? <YES> | |
| Beginning RSTS/E system startup... | |
| 08-Mar-19 11:05 PM Installing monitor overlays | |
| 08-Mar-19 11:05 PM Mounting disks | |
| 08-Mar-19 11:05 PM Assigning logical names | |
| 08-Mar-19 11:05 PM Starting error logging | |
| 08-Mar-19 11:05 PM Setting system characteristics | |
| 08-Mar-19 11:05 PM Installing run-time systems and libraries | |
| 08-Mar-19 11:05 PM Starting Operator/Message Services | |
| >>>>>>>>>>>>>>> OMS V10.1-A 08-Mar-19 11:05 PM <<<<<<<<<<<<<<< | |
| Message 10 from OMS, user [1,2], Detached, job 3 | |
| Starting Operator/Message Services | |
| 08-Mar-19 11:05 PM Setting terminal characteristics | |
| 08-Mar-19 11:05 PM Defining system commands | |
| 08-Mar-19 11:05 PM Setting printer characteristics | |
| 08-Mar-19 11:05 PM Starting spoolers | |
| 08-Mar-19 11:05 PM Starting up DECnet/E V4.1 | |
| Event type 2.0, Local node state change | |
| Occurred 23-Feb-32 23:05:07.0 on node 31.28 (RST101) | |
| Reason for state change: Operator command | |
| Old node state = Off | |
| New node state = On | |
| *** From RST101::[1,2] "[ 1, 2]" on KB0: at 11:05 PM 08-Mar-19 | |
| ** RSTS/E is on the air... | |
| >>>>>>>>>>>>>>> OMS V10.1-A 08-Mar-19 11:05 PM <<<<<<<<<<<<<<< | |
| Message 11 from user [1,2] on _KB0:, job 2 | |
| The system startup is complete | |
| Event type 4.15, Adjacency up | |
| Occurred 23-Feb-32 23:05:07.1 on node 31.28 (RST101) | |
| Circuit QNA-0 | |
| Node address = 31.1023 (IMPRTR) | |
| RSTS V10.1-L 08-Mar-19 11:05 PM | |
| User: 1,2 | |
| Password: | |
| Jobs detached under this account: | |
| Job What Size State Run-time RTS | |
| 1 ERRCPY 5K SR 0.0 ...RSX | |
| 3 OMS 9K SL 0.0 ...RSX | |
| 4 PBS... 19K SL 0.0 ...RSX | |
| 5 EVTLOG 18K SL 0.0 ...RSX | |
| Job number to attach to? | |
| Last interactive login on 08-Mar-19, 11:05 PM at KB0: | |
| Last non-interactive login on 08-Mar-19, 11:05 PM | |
| 4 other users are logged in under this account | |
| $ | |
| $ | |
| $ ncp | |
| NCP>show active lines | |
| Active Line Volatile Summary as of 8-MAR-19 23:05:28 | |
| Line = QNA-0 | |
| State = On | |
| NCP> | |
| NCP> | |
| NCP>show active circuits | |
| Active Circuit Volatile Summary as of 8-MAR-19 23:05:33 | |
| Circuit = QNA-0 | |
| State = On | |
| Adjacent Node = 31.1023 (IMPRTR) | |
| NCP> | |
| NCP> | |
| NCP>help | |
| Programs | |
| NCP | |
| NCP is the Network Control Program. It can be used to create, monitor, | |
| and modify the network parameters on the EXECUTOR node. Type HELP at | |
| the Topic? prompt for help in using this facility. For information | |
| about using NCP, request help on Commands or Parameters. | |
| Additional help is available on: | |
| ABORT CLEAR Commands DEFINE | |
| EVENTS EXIT HELP LIST | |
| LOOP PARAMETERS PURGE SET | |
| SHOW TELL ZERO | |
| Programs NCP Subtopic? set | |
| Programs | |
| NCP | |
| SET | |
| Use the SET command to create or modify parameters or components in the | |
| volatile database on the executor node. Use the DEFINE command to | |
| create or modify parameters or components in the permanent database on | |
| the executor node. | |
| Additional help is available on: | |
| CIRCUIT EXECUTOR LINE LOGGING | |
| NODE OBJECT | |
| Programs NCP SET Subtopic? node | |
| Programs | |
| NCP | |
| SET | |
| NODE | |
| Use the SET NODE command to create or modify node parameters in the | |
| volatile database on the local node. Use the DEFINE NODE command to | |
| create or modify node parameters in the permanent database on the | |
| local node. | |
| SET KNOWN NODES (parameters ...) | |
| NODE node-id | |
| Additional help is available on: | |
| KNOWN NODES NODE node-id ALL ADDRESS node-address | |
| CIRCUIT circuit-id COUNTER TIMER seconds | |
| NAME node-name RECEIVE ANSWER PASSWORD | |
| RECEIVE ORIGINATE PASSWORD TRANSMIT ANSWER PASSWORD | |
| TRANSMIT ORIGINATE PASSWORD Examples | |
| Programs NCP SET NODE Subtopic? ex | |
| Programs | |
| NCP | |
| SET | |
| NODE | |
| Examples | |
| NCP>SET NODE 5.14 NAME DENVER | |
| This command sets the node name of node 5.14 to DENVER. | |
| NCP>SET NODE 14 ADDRESS 2 | |
| This command associates the information for node 1.14 with | |
| a new node whose address is 1.2. This example assumes | |
| that the executor is in area 1. | |
| PROGRAMS NCP SET NODE Subtopic? | |
| PROGRAMS NCP SET Subtopic? | |
| PROGRAMS NCP Subtopic? | |
| PROGRAMS Subtopic? | |
| Topic? | |
| NCP> | |
| NCP>exit |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment