Skip to content

Instantly share code, notes, and snippets.

@tvjames

tvjames/cat proc cpuinfo

Created September 6, 2014 08:46
Show Gist options
  • Save tvjames/082f244dbf3aff703c75 to your computer and use it in GitHub Desktop.
Save tvjames/082f244dbf3aff703c75 to your computer and use it in GitHub Desktop.
Download ZIP
PC Engines APU Hardware Info
Raw
cat proc cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 20
model : 2
model name : AMD G-T40E Processor
stepping : 0
microcode : 0x5000101
cpu MHz : 1000.045
cache size : 512 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 6
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc nonstop_tsc extd_apicid aperfmperf pni monitor ssse3 cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch ibs skinit wdt arat hw_pstate npt lbrv svm_lock nrip_save pausefilter
bogomips : 2000.09
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 1
vendor_id : AuthenticAMD
cpu family : 20
model : 2
model name : AMD G-T40E Processor
stepping : 0
microcode : 0x5000101
cpu MHz : 1000.045
cache size : 512 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 6
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc nonstop_tsc extd_apicid aperfmperf pni monitor ssse3 cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch ibs skinit wdt arat hw_pstate npt lbrv svm_lock nrip_save pausefilter
bogomips : 2000.09
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
Raw
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.60-1+deb7u3
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/zeep-root ro quiet console=ttyS0,115200n8
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007e14e000 (usable)
[ 0.000000] BIOS-e820: 000000007e14e000 - 000000007f000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000f9000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: PC Engines APU, BIOS SageBios_PCEngines_APU-45 04/05/2014
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7e14e max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F000000 mask FFF000000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f25b0] f25b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-000000007e14e000
[ 0.000000] 0000000000 - 0040000000 page 1G
[ 0.000000] 0040000000 - 007e000000 page 2M
[ 0.000000] 007e000000 - 007e14e000 page 4k
[ 0.000000] kernel direct mapping tables up to 7e14e000 @ 1fffd000-20000000
[ 0.000000] RAMDISK: 36b30000 - 37590000
[ 0.000000] ACPI: RSDP 00000000000f2590 00014 (v00 CORE )
[ 0.000000] ACPI: RSDT 000000007e162424 00044 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 000000007e164ce8 000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 000000007e1624c8 027DA (v02 PCENG COREBOOT 00010001 INTL 20121114)
[ 0.000000] ACPI: FACS 000000007e164ca8 00040
[ 0.000000] ACPI: SPCR 000000007e164ddc 00050 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 000000007e164e30 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 000000007e164e68 0005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HEST 000000007e164ec8 00198 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 000000007e165060 0168E (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: SSDT 000000007e1666f0 0030C (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 000000007e166a00 00045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007e14e000
[ 0.000000] Initmem setup node 0 0000000000000000-000000007e14e000
[ 0.000000] NODE_DATA [000000007e149000 - 000000007e14dfff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007b800000-ffff88007d3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007e14e
[ 0.000000] On node 0 totalpages: 516317
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7005 pages used for memmap
[ 0.000000] DMA32 zone: 505329 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7f000000 (gap: 7f000000:79000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007de00000 s82944 r8192 d23552 u1048576
[ 0.000000] pcpu-alloc: s82944 r8192 d23552 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 509251
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/zeep-root ro quiet console=ttyS0,115200n8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2017220k/2065720k available (3431k kernel code, 452k absent, 48048k reserved, 3308k data, 580k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1000.028 MHz processor.
[ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.05 BogoMIPS (lpj=4000112)
[ 0.004020] pid_max: default: 32768 minimum: 301
[ 0.004157] Security Framework initialized
[ 0.004171] AppArmor: AppArmor disabled by boot time parameter
[ 0.004588] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009851] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.010835] Mount-cache hash table entries: 256
[ 0.011184] Initializing cgroup subsys cpuacct
[ 0.011199] Initializing cgroup subsys memory
[ 0.011233] Initializing cgroup subsys devices
[ 0.011239] Initializing cgroup subsys freezer
[ 0.011249] Initializing cgroup subsys net_cls
[ 0.011255] Initializing cgroup subsys blkio
[ 0.011274] Initializing cgroup subsys perf_event
[ 0.011357] tseg: 0000000000
[ 0.011404] CPU: Physical Processor ID: 0
[ 0.011409] CPU: Processor Core ID: 0
[ 0.011415] mce: CPU supports 6 MCE banks
[ 0.012693] ACPI: Core revision 20110623
[ 0.020001] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.020001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.020001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.020001] ..... (found apic 0 pin 0) ...
[ 0.022911] ....... failed.
[ 0.022915] ...trying to set up timer as Virtual Wire IRQ...
[ 0.065246] ..... works.
[ 0.065251] CPU0: AMD G-T40E Processor stepping 00
[ 0.068003] Performance Events: AMD PMU driver.
[ 0.068003] ... version: 0
[ 0.068003] ... bit width: 48
[ 0.068003] ... generic registers: 4
[ 0.068003] ... value mask: 0000ffffffffffff
[ 0.068003] ... max period: 00007fffffffffff
[ 0.068003] ... fixed-purpose events: 0
[ 0.068003] ... event mask: 000000000000000f
[ 0.068003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.068003] Booting Node 0, Processors #1 Ok.
[ 0.068003] smpboot cpu 1: start_ip = 9a000
[ 0.156065] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.156129] Brought up 2 CPUs
[ 0.156136] Total of 2 processors activated (4000.01 BogoMIPS).
[ 0.156980] devtmpfs: initialized
[ 0.168620] print_constraints: dummy:
[ 0.168868] NET: Registered protocol family 16
[ 0.169304] Extended Config Space enabled on 0 nodes
[ 0.169336] ACPI: bus type pci registered
[ 0.169550] PCI: Using configuration type 1 for base access
[ 0.169556] PCI: Using configuration type 1 for extended access
[ 0.172246] bio: create slab <bio-0> at 0
[ 0.172405] ACPI: Added _OSI(Module Device)
[ 0.172405] ACPI: Added _OSI(Processor Device)
[ 0.172405] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.172405] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.173977] ACPI: EC: Look up EC in DSDT
[ 0.177080] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.185856] ACPI: Interpreter enabled
[ 0.185867] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.185943] ACPI: BIOS offers _BFS
[ 0.185949] ACPI: If "acpi.bfs=1" improves resume, please notify linux-acpi@vger.kernel.org
[ 0.185956] ACPI: Using IOAPIC for interrupt routing
[ 0.207581] ACPI: No dock devices found.
[ 0.207595] HEST: Table parsing has been initialized.
[ 0.207607] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.207936] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.208437] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.208446] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.208454] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.208462] pci_root PNP0A08:00: host bridge window [mem 0x7f000000-0xffffffff]
[ 0.208496] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600
[ 0.208636] pci 0000:00:05.0: [1022:1513] type 1 class 0x000604
[ 0.208741] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.208789] pci 0000:00:06.0: [1022:1514] type 1 class 0x000604
[ 0.208890] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.208936] pci 0000:00:07.0: [1022:1515] type 1 class 0x000604
[ 0.209037] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.209149] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.209184] pci 0000:00:11.0: reg 10: [io 0x3010-0x3017]
[ 0.209202] pci 0000:00:11.0: reg 14: [io 0x3020-0x3023]
[ 0.209221] pci 0000:00:11.0: reg 18: [io 0x3018-0x301f]
[ 0.209239] pci 0000:00:11.0: reg 1c: [io 0x3024-0x3027]
[ 0.209258] pci 0000:00:11.0: reg 20: [io 0x3000-0x300f]
[ 0.209276] pci 0000:00:11.0: reg 24: [mem 0xf7f08000-0xf7f083ff]
[ 0.209378] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.209403] pci 0000:00:12.0: reg 10: [mem 0xf7f04000-0xf7f04fff]
[ 0.209524] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.209557] pci 0000:00:12.2: reg 10: [mem 0xf7f08400-0xf7f084ff]
[ 0.209686] pci 0000:00:12.2: supports D1 D2
[ 0.209692] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.209740] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.209765] pci 0000:00:13.0: reg 10: [mem 0xf7f05000-0xf7f05fff]
[ 0.209886] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.209919] pci 0000:00:13.2: reg 10: [mem 0xf7f08500-0xf7f085ff]
[ 0.210047] pci 0000:00:13.2: supports D1 D2
[ 0.210053] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.210102] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.210233] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.210360] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.210437] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.210462] pci 0000:00:14.5: reg 10: [mem 0xf7f06000-0xf7f06fff]
[ 0.210586] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 0.210721] pci 0000:00:15.0: supports D1 D2
[ 0.210765] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.210790] pci 0000:00:16.0: reg 10: [mem 0xf7f07000-0xf7f07fff]
[ 0.210911] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.210944] pci 0000:00:16.2: reg 10: [mem 0xf7f08600-0xf7f086ff]
[ 0.211073] pci 0000:00:16.2: supports D1 D2
[ 0.211079] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.211129] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
[ 0.211200] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
[ 0.211271] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
[ 0.211338] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
[ 0.211420] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
[ 0.211484] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
[ 0.211549] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
[ 0.211613] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
[ 0.211820] pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
[ 0.211845] pci 0000:01:00.0: reg 10: [io 0x1000-0x10ff]
[ 0.211884] pci 0000:01:00.0: reg 18: [mem 0xf7b00000-0xf7b00fff 64bit]
[ 0.211910] pci 0000:01:00.0: reg 20: [mem 0xf7a00000-0xf7a03fff 64bit pref]
[ 0.212025] pci 0000:01:00.0: supports D1 D2
[ 0.212031] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.220092] pci 0000:00:05.0: PCI bridge to [bus 01-01]
[ 0.220111] pci 0000:00:05.0: bridge window [io 0x1000-0x1fff]
[ 0.220122] pci 0000:00:05.0: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.220135] pci 0000:00:05.0: bridge window [mem 0xf7a00000-0xf7afffff 64bit pref]
[ 0.220265] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.220294] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.220332] pci 0000:02:00.0: reg 18: [mem 0xf7d00000-0xf7d00fff 64bit]
[ 0.220359] pci 0000:02:00.0: reg 20: [mem 0xf7c00000-0xf7c03fff 64bit pref]
[ 0.220466] pci 0000:02:00.0: supports D1 D2
[ 0.220472] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.228093] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.228113] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
[ 0.228123] pci 0000:00:06.0: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.228136] pci 0000:00:06.0: bridge window [mem 0xf7c00000-0xf7cfffff 64bit pref]
[ 0.228265] pci 0000:03:00.0: [168c:002a] type 0 class 0x000280
[ 0.228302] pci 0000:03:00.0: reg 10: [mem 0x00000000-0x0000ffff 64bit]
[ 0.228455] pci 0000:03:00.0: supports D1
[ 0.228461] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.228503] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.228523] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 0.228537] pci 0000:00:07.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.228685] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.228704] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.228712] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.228721] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.228729] pci 0000:00:14.4: bridge window [mem 0x7f000000-0xffffffff] (subtractive decode)
[ 0.228820] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 0.228888] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.229559] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBR5._PRT]
[ 0.229676] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBR6._PRT]
[ 0.229787] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBR7._PRT]
[ 0.229897] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
[ 0.230033] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PIBR._PRT]
[ 0.230498] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.230678] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.250878] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.251131] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.251377] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.251620] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.251864] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.252127] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
[ 0.252365] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.252607] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.253097] vgaarb: loaded
[ 0.253097] PCI: Using ACPI for IRQ routing
[ 0.253097] PCI: pci_cache_line_size set to 64 bytes
[ 0.253097] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.253097] reserve RAM buffer: 000000007e14e000 - 000000007fffffff
[ 0.253097] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.253097] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.256070] Switching to clocksource hpet
[ 0.261494] pnp: PnP ACPI init
[ 0.261549] ACPI: bus type pnp registered
[ 0.261888] pnp 00:00: [bus 00-ff]
[ 0.261897] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.261905] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.261912] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.261920] pnp 00:00: [mem 0x000a0000-0x000bffff]
[ 0.261927] pnp 00:00: [mem 0x7f000000-0xffffffff window]
[ 0.262070] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.262615] pnp 00:01: [irq 8]
[ 0.262622] pnp 00:01: [io 0x0070-0x0071]
[ 0.262716] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.262753] pnp 00:02: [io 0x0061]
[ 0.262848] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.262888] pnp 00:03: [dma 4]
[ 0.262895] pnp 00:03: [io 0x0000-0x000f]
[ 0.262901] pnp 00:03: [io 0x0081-0x0083]
[ 0.262907] pnp 00:03: [io 0x0087]
[ 0.262913] pnp 00:03: [io 0x0089-0x008b]
[ 0.262919] pnp 00:03: [io 0x008f]
[ 0.262928] pnp 00:03: [io 0x00c0-0x00df]
[ 0.263023] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.263059] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.263120] pnp 00:04: [irq 13]
[ 0.263215] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.263708] pnp: PnP ACPI: found 5 devices
[ 0.263714] ACPI: ACPI bus type pnp unregistered
[ 0.282228] PCI: max bus depth: 1 pci_try_num: 2
[ 0.282351] pci 0000:00:05.0: PCI bridge to [bus 01-01]
[ 0.282363] pci 0000:00:05.0: bridge window [io 0x1000-0x1fff]
[ 0.282374] pci 0000:00:05.0: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.282385] pci 0000:00:05.0: bridge window [mem 0xf7a00000-0xf7afffff 64bit pref]
[ 0.282398] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.282406] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
[ 0.282416] pci 0000:00:06.0: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.282425] pci 0000:00:06.0: bridge window [mem 0xf7c00000-0xf7cfffff 64bit pref]
[ 0.282445] pci 0000:03:00.0: BAR 0: assigned [mem 0xf7e00000-0xf7e0ffff 64bit]
[ 0.282461] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 0.282470] pci 0000:00:07.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.282484] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 0.282553] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 0.282625] pci 0000:00:05.0: setting latency timer to 64
[ 0.282654] pci 0000:00:06.0: setting latency timer to 64
[ 0.282683] pci 0000:00:07.0: setting latency timer to 64
[ 0.282727] pci 0000:00:15.0: setting latency timer to 64
[ 0.282737] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.282744] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.282751] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.282758] pci_bus 0000:00: resource 7 [mem 0x7f000000-0xffffffff]
[ 0.282766] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.282772] pci_bus 0000:01: resource 1 [mem 0xf7b00000-0xf7bfffff]
[ 0.282779] pci_bus 0000:01: resource 2 [mem 0xf7a00000-0xf7afffff 64bit pref]
[ 0.282787] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.282793] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.282800] pci_bus 0000:02: resource 2 [mem 0xf7c00000-0xf7cfffff 64bit pref]
[ 0.282808] pci_bus 0000:03: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.282816] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.282822] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.282828] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.282835] pci_bus 0000:04: resource 7 [mem 0x7f000000-0xffffffff]
[ 0.283101] NET: Registered protocol family 2
[ 0.283537] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.285706] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.289741] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.290569] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.290576] TCP reno registered
[ 0.290607] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.290663] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.291209] NET: Registered protocol family 1
[ 0.291666] PCI: CLS 64 bytes, default 64
[ 0.291827] Unpacking initramfs...
[ 0.983833] Freeing initrd memory: 10624k freed
[ 0.993691] perf: AMD IBS detected (0x000000ff)
[ 0.994648] audit: initializing netlink socket (disabled)
[ 0.994682] type=2000 audit(1407066482.992:1): initialized
[ 1.036403] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.038306] VFS: Disk quotas dquot_6.5.2
[ 1.038452] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.038701] msgmni has been set to 3960
[ 1.039678] alg: No test for stdrng (krng)
[ 1.039819] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.039831] io scheduler noop registered
[ 1.039837] io scheduler deadline registered
[ 1.039935] io scheduler cfq registered (default)
[ 1.040322] pcieport 0000:00:05.0: setting latency timer to 64
[ 1.040414] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
[ 1.040570] pcieport 0000:00:06.0: setting latency timer to 64
[ 1.040640] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 1.040779] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.040847] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
[ 1.041035] pcieport 0000:00:15.0: setting latency timer to 64
[ 1.041126] pcieport 0000:00:15.0: irq 43 for MSI/MSI-X
[ 1.041412] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[ 1.041421] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.041431] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[ 1.041478] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[ 1.041485] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.041494] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
[ 1.041538] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[ 1.041545] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.041555] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
[ 1.041648] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.041659] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 1.041719] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.041789] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.041795] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.042700] ERST: Table is not found!
[ 1.042760] GHES: Failed to enable APEI firmware first mode.
[ 1.043126] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.063841] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.108871] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.130492] Linux agpgart interface v0.103
[ 1.130898] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.992252] Refined TSC clocksource calibration: 999.999 MHz.
[ 1.992269] Switching to clocksource tsc
[ 3.084422] i8042: No controller found
[ 3.088735] mousedev: PS/2 mouse device common for all mice
[ 3.088911] rtc_cmos 00:01: RTC can wake from S4
[ 3.089306] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 3.089411] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 3.089453] cpuidle: using governor ladder
[ 3.089459] cpuidle: using governor menu
[ 3.090024] TCP cubic registered
[ 3.090172] NET: Registered protocol family 10
[ 3.091535] Mobile IPv6
[ 3.091543] NET: Registered protocol family 17
[ 3.091556] Registering the dns_resolver key type
[ 3.092174] PM: Hibernation image not present or could not be loaded.
[ 3.092220] registered taskstats version 1
[ 3.093271] rtc_cmos 00:01: setting system clock to 2014-08-03 11:48:05 UTC (1407066485)
[ 3.093365] Initializing network drop monitor service
[ 3.097390] Freeing unused kernel memory: 580k freed
[ 3.097889] Write protecting the kernel read-only data: 6144k
[ 3.105989] Freeing unused kernel memory: 648k freed
[ 3.114862] Freeing unused kernel memory: 688k freed
[ 3.157604] udevd[48]: starting version 175
[ 3.231409] usbcore: registered new interface driver usbfs
[ 3.231483] usbcore: registered new interface driver hub
[ 3.241539] SCSI subsystem initialized
[ 3.255000] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.255112] r8169 0000:01:00.0: setting latency timer to 64
[ 3.255197] r8169 0000:01:00.0: irq 44 for MSI/MSI-X
[ 3.265226] usbcore: registered new device driver usb
[ 3.266474] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.266625] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 3.266692] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 3.266761] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.266811] QUIRK: Enable AMD PLL fix
[ 3.266881] ehci_hcd 0000:00:12.2: debug port 1
[ 3.266942] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf7f08400
[ 3.269143] r8169 0000:01:00.0: eth0: RTL8168e/8111e at 0xffffc9000030e000, 00:0d:b9:34:31:b1, XID 0c200000 IRQ 44
[ 3.269157] r8169 0000:01:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.271017] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.271152] r8169 0000:02:00.0: setting latency timer to 64
[ 3.271238] r8169 0000:02:00.0: irq 45 for MSI/MSI-X
[ 3.271921] libata version 3.00 loaded.
[ 3.272689] r8169 0000:02:00.0: eth1: RTL8168e/8111e at 0xffffc900008b4000, 00:0d:b9:34:31:b2, XID 0c200000 IRQ 45
[ 3.272700] r8169 0000:02:00.0: eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.276150] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 3.276241] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.276249] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.276257] usb usb1: Product: EHCI Host Controller
[ 3.276263] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 3.276269] usb usb1: SerialNumber: 0000:00:12.2
[ 3.276697] hub 1-0:1.0: USB hub found
[ 3.276713] hub 1-0:1.0: 5 ports detected
[ 3.277156] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 3.277183] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 3.277248] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.277304] ehci_hcd 0000:00:13.2: debug port 1
[ 3.277342] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf7f08500
[ 3.281012] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.288162] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 3.288291] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.288300] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.288308] usb usb2: Product: EHCI Host Controller
[ 3.288314] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 3.288320] usb usb2: SerialNumber: 0000:00:13.2
[ 3.289464] hub 2-0:1.0: USB hub found
[ 3.289481] hub 2-0:1.0: 5 ports detected
[ 3.289911] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 3.289940] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 3.290009] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.290063] ehci_hcd 0000:00:16.2: debug port 1
[ 3.290099] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf7f08600
[ 3.300179] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 3.300293] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.300302] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.300310] usb usb3: Product: EHCI Host Controller
[ 3.300316] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 3.300322] usb usb3: SerialNumber: 0000:00:16.2
[ 3.300718] hub 3-0:1.0: USB hub found
[ 3.300733] hub 3-0:1.0: 4 ports detected
[ 3.301891] ahci 0000:00:11.0: version 3.0
[ 3.302306] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 3.302318] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
[ 3.333211] scsi0 : ahci
[ 3.338433] scsi1 : ahci
[ 3.338754] scsi2 : ahci
[ 3.338976] scsi3 : ahci
[ 3.339192] scsi4 : ahci
[ 3.339420] scsi5 : ahci
[ 3.339939] ata1: SATA max UDMA/133 abar m1024@0xf7f08000 port 0xf7f08100 irq 19
[ 3.339950] ata2: SATA max UDMA/133 abar m1024@0xf7f08000 port 0xf7f08180 irq 19
[ 3.339959] ata3: SATA max UDMA/133 abar m1024@0xf7f08000 port 0xf7f08200 irq 19
[ 3.339968] ata4: SATA max UDMA/133 abar m1024@0xf7f08000 port 0xf7f08280 irq 19
[ 3.339977] ata5: SATA max UDMA/133 abar m1024@0xf7f08000 port 0xf7f08300 irq 19
[ 3.339986] ata6: SATA max UDMA/133 abar m1024@0xf7f08000 port 0xf7f08380 irq 19
[ 3.340374] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 3.340416] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 3.340542] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf7f04000
[ 3.400347] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.400359] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.400367] usb usb4: Product: OHCI Host Controller
[ 3.400373] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 3.400379] usb usb4: SerialNumber: 0000:00:12.0
[ 3.400983] hub 4-0:1.0: USB hub found
[ 3.401052] hub 4-0:1.0: 5 ports detected
[ 3.401450] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.401476] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 3.401572] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf7f05000
[ 3.460339] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.460351] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.460359] usb usb5: Product: OHCI Host Controller
[ 3.460365] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 3.460371] usb usb5: SerialNumber: 0000:00:13.0
[ 3.461015] hub 5-0:1.0: USB hub found
[ 3.461084] hub 5-0:1.0: 5 ports detected
[ 3.461530] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 3.461561] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 3.461659] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf7f06000
[ 3.520328] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.520341] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.520349] usb usb6: Product: OHCI Host Controller
[ 3.520355] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 3.520361] usb usb6: SerialNumber: 0000:00:14.5
[ 3.520989] hub 6-0:1.0: USB hub found
[ 3.521058] hub 6-0:1.0: 2 ports detected
[ 3.522076] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 3.522104] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 3.522211] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf7f07000
[ 3.580343] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.580355] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.580363] usb usb7: Product: OHCI Host Controller
[ 3.580369] usb usb7: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 3.580375] usb usb7: SerialNumber: 0000:00:16.0
[ 3.580997] hub 7-0:1.0: USB hub found
[ 3.581066] hub 7-0:1.0: 4 ports detected
[ 3.660340] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.660404] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.660454] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.660491] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.660558] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.712306] usb 3-1: new high-speed USB device number 2 using ehci_hcd
[ 3.832307] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.832864] ata1.00: ATA-7: SuperSSpeed S238 16GB, V4629N, max UDMA/133
[ 3.832876] ata1.00: 31248704 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.833465] ata1.00: configured for UDMA/133
[ 3.834091] scsi 0:0:0:0: Direct-Access ATA SuperSSpeed S238 V462 PQ: 0 ANSI: 5
[ 3.846954] usb 3-1: New USB device found, idVendor=058f, idProduct=6366
[ 3.846967] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.846975] usb 3-1: Product: Flash Card Reader/Writer
[ 3.846981] usb 3-1: Manufacturer: Generic
[ 3.846986] usb 3-1: SerialNumber: 058F63666485
[ 3.851026] sd 0:0:0:0: [sda] 31248704 512-byte logical blocks: (15.9 GB/14.9 GiB)
[ 3.851212] sd 0:0:0:0: [sda] Write Protect is off
[ 3.851222] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.851536] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.853251] sda: sda1 sda2 < sda5 >
[ 3.854305] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.858254] Initializing USB Mass Storage driver...
[ 3.859703] scsi6 : usb-storage 3-1:1.0
[ 3.859945] usbcore: registered new interface driver usb-storage
[ 3.859952] USB Mass Storage support registered.
[ 3.861006] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.984276] usb 5-1: new full-speed USB device number 2 using ohci_hcd
[ 4.079731] device-mapper: uevent: version 1.0.3
[ 4.079944] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 4.157388] usb 5-1: New USB device found, idVendor=05c6, idProduct=1000
[ 4.157403] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.157413] usb 5-1: Product: USB MMC Storage
[ 4.157420] usb 5-1: Manufacturer: Qualcomm, Incorporated
[ 4.157427] usb 5-1: SerialNumber: 000000000002
[ 4.165670] scsi7 : usb-storage 5-1:1.0
[ 4.288644] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 4.857498] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 4
[ 4.858923] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 4.861892] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 4.874290] udevd[334]: starting version 175
[ 5.074292] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 5.074315] ACPI: Power Button [PWRB]
[ 5.074515] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 5.074526] ACPI: Power Button [PWRF]
[ 5.081083] cfg80211: Calling CRDA to update world regulatory domain
[ 5.084581] ACPI: acpi_idle registered with cpuidle
[ 5.169395] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SMB0 [io 0xb00-0xb0b]
[ 5.169406] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.177457] scsi 7:0:0:0: CD-ROM GT HSDPA Modem 3.00 PQ: 0 ANSI: 2
[ 5.179454] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 5.179664] SP5100 TCO timer: Watchdog reboot detected.
[ 5.180365] SP5100 TCO timer: initialized (0xffffc900008b6000). heartbeat=60 sec (nowayout=0)
[ 5.181231] scsi 7:0:0:0: Attached scsi generic sg2 type 5
[ 5.189702] ath9k 0000:03:00.0: enabling device (0000 -> 0002)
[ 5.189742] ath9k 0000:03:00.0: setting latency timer to 64
[ 5.309174] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 5.334255] powernow-k8: Found 1 AMD G-T40E Processor (2 cpu cores) (version 2.20.00)
[ 5.334678] powernow-k8: 0 : pstate 0 (1000 MHz)
[ 5.334685] powernow-k8: 1 : pstate 1 (800 MHz)
[ 5.385569] Error: Driver 'pcspkr' is already registered, aborting...
[ 5.516527] sr0: scsi-1 drive
[ 5.516540] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.517634] sr 7:0:0:0: Attached scsi CD-ROM sr0
[ 5.624523] ath: EEPROM regdomain: 0x0
[ 5.624534] ath: EEPROM indicates default country code should be used
[ 5.624539] ath: doing EEPROM country->regdmn map search
[ 5.624547] ath: country maps to regdmn code: 0x3a
[ 5.624552] ath: Country alpha2 being used: US
[ 5.624557] ath: Regpair used: 0x3a
[ 5.650890] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.653022] Registered led device: ath9k-phy0
[ 5.653039] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc90000920000, irq=19
[ 5.661457] cfg80211: World regulatory domain updated:
[ 5.661470] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5.661480] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 5.661488] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 5.661495] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 5.661502] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 5.661509] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 5.661516] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 5.661553] cfg80211: Calling CRDA for country: US
[ 5.680455] cfg80211: Regulatory domain changed to country: US
[ 5.680467] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5.680476] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 5.680484] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
[ 5.680491] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
[ 5.680498] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
[ 5.680505] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 6.290927] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 6.419869] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 6.510182] loop: module loaded
[ 8.834257] r8169 0000:01:00.0: firmware: agent loaded rtl_nic/rtl8168e-2.fw into memory
[ 8.975965] r8169 0000:01:00.0: eth0: link down
[ 8.976121] r8169 0000:01:00.0: eth0: link down
[ 8.977724] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.268184] r8169 0000:02:00.0: firmware: agent loaded rtl_nic/rtl8168e-2.fw into memory
[ 9.407977] r8169 0000:02:00.0: eth1: link down
[ 9.408135] r8169 0000:02:00.0: eth1: link down
[ 9.409734] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 9.713934] PPP generic driver version 2.4.2
[ 9.891998] IPv6 over IPv4 tunneling driver
[ 10.470139] RPC: Registered named UNIX socket transport module.
[ 10.470152] RPC: Registered udp transport module.
[ 10.470158] RPC: Registered tcp transport module.
[ 10.470165] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.487323] FS-Cache: Loaded
[ 10.511363] FS-Cache: Netfs 'nfs' registered for caching
[ 10.527427] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 11.284104] r8169 0000:01:00.0: eth0: link up
[ 11.285212] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.323421] IPv4 over IPv4 tunneling driver
[ 11.495039] r8169 0000:02:00.0: eth1: link up
[ 11.498546] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 11.801762] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.818423] NET: Registered protocol family 24
[ 16.792123] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 16.859633] ip6_tables: (C) 2000-2006 Netfilter Core Team
Raw
lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Complex
00:05.0 PCI bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Port
00:06.0 PCI bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Port
00:07.0 PCI bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Port
00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:15.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
Raw
lsusb
Bus 004 Device 002: ID 05c6:1000 Qualcomm, Inc. Mass Storage Device
Bus 005 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment