Created
February 8, 2021 03:23
-
-
Save tywtyw2002/00752f88de698ac6c0d393a1301ba3f6 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [ 1276.604292] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1276.605513] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1276.606723] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1276.607942] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1276.609240] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1277.044583] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.048476] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.052363] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.057973] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.059233] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.060520] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.065908] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.067167] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.068433] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.073509] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.074801] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.076058] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.081130] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.082387] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.083643] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.088703] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.089958] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.091213] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.096269] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.097526] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.098781] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.103796] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.105093] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.106352] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.111366] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.112664] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.113925] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.118941] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.120239] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.121499] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.126521] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.127779] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.129078] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.134147] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.135405] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.136725] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.141785] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.143044] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.144343] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.149407] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.150665] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.151924] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.156992] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.158251] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.159510] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.164568] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.165827] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.167087] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.172174] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.173445] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.174697] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.179687] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.180977] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.182226] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.187206] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.188468] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.189713] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.194699] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.195915] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.197169] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.202257] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.203492] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.204695] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.217459] bnx2x: [bnx2x_bsc_read:3129(enp3s0f0)]wr 0 byte timed out after 1002 try | |
| [ 1277.218992] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.220512] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.221762] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.234474] bnx2x: [bnx2x_bsc_read:3129(enp3s0f0)]wr 0 byte timed out after 1002 try | |
| [ 1277.237724] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.238915] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.240131] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.252895] bnx2x: [bnx2x_bsc_read:3129(enp3s0f0)]wr 0 byte timed out after 1002 try | |
| [ 1277.254092] bnx2x: [bnx2x_get_module_eeprom:1539(enp3s0f0)]Failed reading A2 section | |
| [ 1277.628362] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1277.632049] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1277.635787] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1277.639536] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1277.640959] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1277.681605] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.684240] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.686826] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.693460] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.694719] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.695977] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.701113] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.702392] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.703650] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.708723] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.709981] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.711238] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.716312] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.717569] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.718845] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.723883] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.725183] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.726483] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.731499] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.732793] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.734050] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.739069] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.740363] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.741622] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.746637] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.747893] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.749194] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.754256] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.755512] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.756813] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.761879] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.763135] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.764432] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.769501] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.770758] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.772015] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.777074] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.778332] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.779593] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.784655] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.785932] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.787192] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.792259] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.793518] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.794778] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.799794] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.801092] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.802368] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.807385] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.808679] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.809932] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.814960] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.816251] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.817500] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.822501] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.823726] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.825012] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.830035] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.831253] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.832508] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.837590] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.838820] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.840010] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.852750] bnx2x: [bnx2x_bsc_read:3129(enp3s0f0)]wr 0 byte timed out after 1002 try | |
| [ 1277.854192] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.855628] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.857102] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.869898] bnx2x: [bnx2x_bsc_read:3129(enp3s0f0)]wr 0 byte timed out after 1002 try | |
| [ 1277.872123] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1277.873342] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1277.874528] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1277.887259] bnx2x: [bnx2x_bsc_read:3129(enp3s0f0)]wr 0 byte timed out after 1002 try | |
| [ 1277.888495] bnx2x: [bnx2x_get_module_eeprom:1539(enp3s0f0)]Failed reading A2 section | |
| [ 1278.317156] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.320895] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.324640] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.330189] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.331391] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.332641] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.337980] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.339182] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.340410] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.345683] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.346884] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.348112] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.353379] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.354580] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.355799] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.360766] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.361964] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.363183] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.368182] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.369413] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.370632] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.375589] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.376823] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.378042] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.382995] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.384231] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.385467] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.390427] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.391623] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.392886] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.397886] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.399081] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.400338] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.405338] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.406532] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.407749] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.412742] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.413936] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.415151] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.420146] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.421364] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.422579] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.427537] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.428772] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.429987] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.434940] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.436174] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.437406] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.442362] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.443557] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.444836] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.449827] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.451022] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.452297] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.457292] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.458481] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.459670] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.464658] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.465843] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.467026] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.472063] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.473297] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.474510] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.487253] bnx2x: [bnx2x_bsc_read:3129(enp3s0f0)]wr 0 byte timed out after 1002 try | |
| [ 1278.488573] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.489893] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.491224] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.504131] bnx2x: [bnx2x_bsc_read:3129(enp3s0f0)]wr 0 byte timed out after 1002 try | |
| [ 1278.507380] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1278.508615] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1278.509849] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1278.522583] bnx2x: [bnx2x_bsc_read:3129(enp3s0f0)]wr 0 byte timed out after 1002 try | |
| [ 1278.523778] bnx2x: [bnx2x_get_module_eeprom:1539(enp3s0f0)]Failed reading A2 section | |
| [ 1278.652437] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1278.655728] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1278.659047] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1278.662381] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1278.663790] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1279.005092] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.008998] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.012873] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.018520] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.019783] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.021072] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.026476] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.027739] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.029010] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.034352] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.035630] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.036898] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.042224] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.043485] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.044776] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.049837] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.051096] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.052418] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.057481] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.058742] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.060038] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.065102] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.066363] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.067625] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.072707] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.073967] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.075228] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.080290] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.081550] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.082812] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.087837] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.089135] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.090397] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.095416] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.096715] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.097976] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.102996] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.104299] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.105559] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.110577] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.111838] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.113139] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.118209] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.119482] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.120784] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.125850] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.127110] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.128412] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.133476] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.134732] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.136004] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.141038] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.142293] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.143542] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.148573] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.149799] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.151045] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.156090] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.157349] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.158606] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.163640] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.164883] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.166109] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.178869] bnx2x: [bnx2x_bsc_read:3129(enp3s0f0)]wr 0 byte timed out after 1002 try | |
| [ 1279.180476] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.181704] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.182884] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.195620] bnx2x: [bnx2x_bsc_read:3129(enp3s0f0)]wr 0 byte timed out after 1002 try | |
| [ 1279.198890] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1279.200081] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1279.201316] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1279.214101] bnx2x: [bnx2x_bsc_read:3129(enp3s0f0)]wr 0 byte timed out after 1002 try | |
| [ 1279.215298] bnx2x: [bnx2x_get_module_eeprom:1539(enp3s0f0)]Failed reading A2 section | |
| [ 1279.676450] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1279.680170] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1279.683874] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1279.687645] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1279.689085] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1280.700431] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1280.704333] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1280.708175] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1280.712090] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1280.716069] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1281.540093] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.544207] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.548264] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.553534] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.554856] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.556202] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.561368] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.562691] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.564012] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.569123] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.570444] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.571764] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.576882] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.578201] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.579521] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.584626] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.585944] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.587262] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.592363] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.593681] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.594999] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.600105] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.601483] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.602845] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.607900] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.609262] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.610583] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.615710] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.617068] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.618408] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.623463] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.624821] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.626141] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.631205] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.632564] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.633884] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.638959] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.640315] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.641634] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.646694] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.648011] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.649369] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.654472] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.655788] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.657167] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.662246] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.663536] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.664889] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.669980] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.671265] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.672590] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.677680] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.678959] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.680261] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.685300] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.686561] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.687816] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.692848] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.694065] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.695278] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.700362] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.701609] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.702799] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.715518] bnx2x: [bnx2x_bsc_read:3129(enp3s0f0)]wr 0 byte timed out after 1002 try | |
| [ 1281.716843] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.718047] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.719225] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.731977] bnx2x: [bnx2x_bsc_read:3129(enp3s0f0)]wr 0 byte timed out after 1002 try | |
| [ 1281.735243] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1281.736480] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1281.737712] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1281.750431] bnx2x: [bnx2x_bsc_read:3129(enp3s0f0)]wr 0 byte timed out after 1002 try | |
| [ 1281.751645] bnx2x: [bnx2x_get_module_eeprom:1539(enp3s0f0)]Failed reading A2 section | |
| [ 1281.752586] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1281.754127] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1281.755337] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1281.756600] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1281.757837] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1282.780516] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1282.784438] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1282.788282] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1282.792196] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1282.796177] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1283.804680] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1283.808748] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1283.812774] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1283.816849] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1283.818385] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1284.117050] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.121258] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.125498] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.131240] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.132613] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.134044] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.139542] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.140910] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.142324] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.147719] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.149088] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.150519] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.155911] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.157277] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.158689] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.163811] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.165210] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.166641] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.171762] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.173161] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.174540] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.179656] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.181052] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.182433] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.187568] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.188966] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.190346] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.195466] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.196865] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.198245] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.203358] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.204755] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.206136] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.211257] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.212654] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.214035] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.219153] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.220551] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.221932] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.227049] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.228439] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.229793] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.234902] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.236270] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.237635] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.242715] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.244060] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.245444] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.250566] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.251879] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.253245] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.258349] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.259639] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.260960] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.266028] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.267310] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.268611] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.273647] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.274866] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.276080] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.281149] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.282378] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.283587] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.296354] bnx2x: [bnx2x_bsc_read:3129(enp3s0f0)]wr 0 byte timed out after 1002 try | |
| [ 1284.297519] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.298677] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.299876] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.312655] bnx2x: [bnx2x_bsc_read:3129(enp3s0f0)]wr 0 byte timed out after 1002 try | |
| [ 1284.315889] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1284.317146] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1284.318382] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1284.331103] bnx2x: [bnx2x_bsc_read:3129(enp3s0f0)]wr 0 byte timed out after 1002 try | |
| [ 1284.332339] bnx2x: [bnx2x_get_module_eeprom:1539(enp3s0f0)]Failed reading A2 section | |
| [ 1284.828529] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1284.832224] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1284.835975] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1284.839734] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1284.841161] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1285.852726] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1285.856619] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1285.860466] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1285.864406] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1285.865889] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1286.876599] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1286.880686] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1286.884734] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1286.888788] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1286.890332] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1287.900781] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1287.904993] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1287.909205] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1287.913454] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1287.915045] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1288.924612] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1288.927527] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1288.930426] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1288.933403] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1288.936396] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1289.948796] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1289.951601] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1289.954392] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1289.957199] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1289.960060] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1290.972659] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1290.977338] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1290.982055] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1290.986789] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1290.988568] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1291.996926] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1292.000851] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1292.004794] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1292.008810] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1292.010615] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1293.020698] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1293.024432] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1293.028148] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1293.032750] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1293.034632] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1294.044913] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1294.050215] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1294.055504] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1294.057610] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1294.059586] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1295.068741] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1295.072361] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1295.075965] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1295.078237] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1295.080492] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1296.092945] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1296.096985] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1296.101390] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1296.105857] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1296.107839] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1297.116854] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1297.121856] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1297.127465] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1297.129497] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1297.131371] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1298.141012] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1298.146634] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1298.152242] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1298.154251] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1298.156122] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1299.164833] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1299.168573] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1299.172315] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1299.176830] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1299.178841] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1300.189046] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1300.193544] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1300.198049] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1300.202544] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1300.204537] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1301.212889] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1301.217382] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1301.222372] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1301.227358] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1301.229390] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1302.237108] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1302.242715] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1302.248338] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1302.250355] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1302.252229] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1303.260933] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1303.265021] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1303.270002] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1303.274986] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1303.277004] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1304.285140] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1304.289615] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1304.293732] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1304.297884] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1304.299889] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1305.308985] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1305.313521] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1305.318495] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1305.323451] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1305.325459] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1306.333194] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1306.338211] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1306.343820] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1306.345825] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1306.347688] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1307.357042] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1307.362083] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1307.367676] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1307.369680] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1307.371547] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1308.381233] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1308.385753] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1308.390726] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1308.395698] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1308.397704] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1309.405100] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1309.410754] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1309.416337] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1309.418341] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1309.420206] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1310.429295] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1310.434950] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1310.440537] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1310.442562] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1310.444428] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1310.490935] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.494479] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.497946] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.503642] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.505476] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.507315] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.513031] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.514803] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.516561] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.522101] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.523844] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.525642] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.531167] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.532894] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.534603] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.540047] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.541783] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.543452] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.548896] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.550550] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.552193] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.557613] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.559238] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.560836] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.566205] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.567787] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.569404] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.574762] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.576299] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.577875] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.583208] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.584724] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.586272] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.591562] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.593073] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.594556] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.599771] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.601259] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.602698] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.607869] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.609349] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.610766] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.615920] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.617338] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.618711] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.623831] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.625247] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.626598] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.631670] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.633021] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.634345] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.639396] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.640685] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.642023] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.647089] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.648351] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.649650] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.654683] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.655901] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.657154] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.662249] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.663479] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.664669] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.669608] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.670762] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.671916] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.676975] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.678152] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.679305] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.684216] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.685406] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.686559] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.691472] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.692624] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.693818] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.698774] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.699925] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.701121] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.706080] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.707232] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.708402] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.713360] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.714512] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.715664] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.720583] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.721773] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.722926] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.727837] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.729027] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.730179] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.735088] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.736238] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.737432] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.742387] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.743537] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.744687] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.749636] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.750786] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.751937] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.756890] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.758082] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.759232] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.764144] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.765330] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.766481] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1310.771396] bnx2x: [bnx2x_bsc_module_sel:3080(enp3s0f0)]Setting BSC switch | |
| [ 1310.772545] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 29 to 0 | |
| [ 1310.773737] bnx2x: [bnx2x_set_epio:395(enp3s0f0)]Setting EPIO pin 28 to 0 | |
| [ 1311.453143] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1311.456698] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1311.460244] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1311.463870] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1311.465282] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1312.477343] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1312.481096] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1312.484785] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1312.488523] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1312.489973] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1313.501176] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1313.504607] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1313.508087] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1313.512018] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1313.513529] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1314.525388] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1314.529436] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1314.533444] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1314.537551] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1314.539082] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1315.549230] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1315.553466] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1315.557678] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1315.561904] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1315.563494] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1316.573437] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1316.577794] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1316.582166] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1316.586572] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1316.588199] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1317.597302] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1317.601848] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1317.606364] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1317.610952] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1317.612644] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1318.621481] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1318.626220] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1318.630898] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1318.635607] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1318.637364] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1319.645315] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1319.649621] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1319.654494] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1319.659400] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1319.661198] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1320.669530] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1320.674576] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1320.679569] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1320.681591] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1320.683480] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1321.693377] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1321.698607] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1321.703780] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1321.705679] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1321.707445] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1322.717579] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1322.722935] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1322.728297] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1322.730237] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1322.732044] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1323.741423] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1323.746951] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1323.752432] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1323.754451] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1323.756316] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1324.765615] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1324.770651] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1324.776248] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1324.778254] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1324.780117] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1325.789457] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1325.794488] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1325.800080] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1325.802086] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1325.803969] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1326.813675] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1326.819317] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1326.824919] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1326.826922] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1326.828787] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1327.837514] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1327.843156] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1327.848743] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1327.850748] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1327.852630] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1328.861715] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1328.867353] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1328.872952] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1328.874957] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1328.876820] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1329.885562] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1329.891206] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1329.896793] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1329.898799] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1329.900661] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1330.909766] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1330.915414] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1330.921014] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1330.923023] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1330.924885] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1331.933607] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1331.939260] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1331.944839] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1331.946844] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1331.948707] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1332.957815] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1332.963458] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1332.969059] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1332.971063] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1332.972926] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1333.981652] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1333.987308] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1333.992891] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1333.994894] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1333.996757] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1335.005861] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1335.011498] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1335.017099] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1335.019104] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1335.020968] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1336.029697] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1336.035347] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1336.040929] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1336.042935] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1336.044804] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1337.053904] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1337.059545] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1337.065120] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1337.067140] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1337.069001] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1338.077748] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1338.083404] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1338.088980] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1338.090980] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1338.092843] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1339.101957] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1339.107592] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1339.113172] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1339.115172] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1339.117052] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1340.125787] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1340.130299] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1340.135281] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1340.140229] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1340.142231] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1341.150049] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1341.155687] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1341.161260] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1341.163262] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1341.165141] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1342.173835] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1342.179464] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1342.185054] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1342.187180] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1342.189153] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1343.198047] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1343.203683] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1343.207185] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1343.210615] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1343.214085] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1344.221896] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1344.227529] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1344.233118] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1344.235120] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1344.236980] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1345.246105] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1345.251751] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1345.257324] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1345.259323] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1345.261184] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1346.269934] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1346.274952] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1346.278725] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1346.282454] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1346.286189] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1347.294145] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1347.299788] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1347.305356] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1347.307357] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1347.309216] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1348.317991] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1348.323620] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1348.329207] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1348.331205] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1348.333063] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1349.342192] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1349.347834] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1349.353400] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1349.355399] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1349.357267] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1350.366031] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1350.371045] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1350.376629] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1350.378649] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1350.380509] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1351.390228] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1351.394759] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1351.399722] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1351.404670] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1351.406672] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1352.414071] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1352.419078] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1352.424036] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1352.426028] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1352.427908] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1353.438271] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1353.442786] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1353.447772] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1353.452718] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1353.454721] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1354.462118] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1354.467126] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1354.472706] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1354.474707] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1354.476568] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1355.486330] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1355.491958] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1355.497547] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1355.499552] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1355.501413] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1356.510178] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1356.515809] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1356.521382] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1356.523383] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1356.525244] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1357.534344] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1357.536742] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1357.539116] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1357.542324] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1357.545546] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1358.558313] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1358.560264] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1358.562170] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1358.564068] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1358.565986] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1359.582431] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1359.588071] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1359.593660] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1359.595671] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1359.597538] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1360.606263] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1360.611916] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1360.615698] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1360.619425] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1360.623175] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1361.574296] bnx2x: [bnx2x_nic_unload:2980(enp3s0f1)]Starting NIC unload | |
| [ 1361.580925] bnx2x: [bnx2x_vlan_mac_del_all:2065(enp3s0f1)]vlan_mac_del_all -- taking vlan_mac_lock (reader) | |
| [ 1361.585509] bnx2x: [__bnx2x_vlan_mac_h_read_lock:528(enp3s0f1)]vlan_mac_lock - locked reader - number 1 | |
| [ 1361.587523] bnx2x: [bnx2x_exe_queue_alloc_elem:251(enp3s0f1)]Allocating a new exe_queue element | |
| [ 1361.589423] bnx2x: [bnx2x_check_mac_del:702(enp3s0f1)]Checking MAC fc:15:b4:0c:2a:24 for DEL command | |
| [ 1361.591315] bnx2x: [bnx2x_vlan_mac_del_all:2085(enp3s0f1)]vlan_mac_del_all -- releasing vlan_mac_lock (reader) | |
| [ 1361.593267] bnx2x: [__bnx2x_vlan_mac_h_read_unlock:574(enp3s0f1)]vlan_mac_lock - decreased readers to 0 | |
| [ 1361.595179] bnx2x: [__bnx2x_vlan_mac_execute_step:1588(enp3s0f1)]vlan_mac_execute_step - trying to take writer lock | |
| [ 1361.597119] bnx2x: [__bnx2x_vlan_mac_h_write_trylock:438(enp3s0f1)]vlan_mac_lock writer - Taken | |
| [ 1361.599029] bnx2x: [bnx2x_check_mac_del:702(enp3s0f1)]Checking MAC fc:15:b4:0c:2a:24 for DEL command | |
| [ 1361.600993] bnx2x: [bnx2x_set_one_mac_e2:930(enp3s0f1)]About to delete MAC fc:15:b4:0c:2a:24 for Queue 2 | |
| [ 1361.602937] bnx2x: [bnx2x_sp_post:3944(enp3s0f1)]SPQE[e] (2:6df280e0) (cmd, common?) (9,1) hw_cid 0 data (2:67756000) type(0x0) left (CQ, EQ) (8,f5) | |
| [ 1361.604956] bnx2x: [bnx2x_check_mac_del:702(enp3s0f1)]Checking MAC fc:15:b4:0c:2a:24 for DEL command | |
| [ 1361.605040] bnx2x: [bnx2x_sp_task:5681(enp3s0f1)]sp task invoked | |
| [ 1361.607041] bnx2x: [bnx2x_vlan_mac_del_all:2065(enp3s0f1)]vlan_mac_del_all -- taking vlan_mac_lock (reader) | |
| [ 1361.607042] bnx2x: [__bnx2x_vlan_mac_h_read_lock:528(enp3s0f1)]vlan_mac_lock - locked reader - number 1 | |
| [ 1361.607042] bnx2x: [bnx2x_vlan_mac_del_all:2085(enp3s0f1)]vlan_mac_del_all -- releasing vlan_mac_lock (reader) | |
| [ 1361.607046] bnx2x: [__bnx2x_vlan_mac_h_read_unlock:574(enp3s0f1)]vlan_mac_lock - decreased readers to 0 | |
| [ 1361.609133] bnx2x: [bnx2x_sp_task:5690(enp3s0f1)]status 2 | |
| [ 1361.611237] bnx2x: [__bnx2x_vlan_mac_execute_step:1588(enp3s0f1)]vlan_mac_execute_step - trying to take writer lock | |
| [ 1361.611238] bnx2x: [__bnx2x_vlan_mac_h_write_trylock:438(enp3s0f1)]vlan_mac_lock writer - Taken | |
| [ 1361.611241] bnx2x: [bnx2x_state_wait:292(enp3s0f1)]waiting for state to become 0 | |
| [ 1361.613346] bnx2x: [bnx2x_sp_task:5691(enp3s0f1)]setting interrupt_occurred to 0 | |
| [ 1361.613349] bnx2x: [bnx2x_eq_int:5485(enp3s0f1)]EQ: hw_cons 8 sw_cons 7 bp->eq_spq_left f5 | |
| [ 1361.630667] bnx2x: [bnx2x_eq_int:5633(enp3s0f1)]got (un)set vlan/mac ramrod | |
| [ 1361.632778] bnx2x: [bnx2x_handle_classification_eqe:5311(enp3s0f1)]Got SETUP_MAC completions | |
| [ 1361.634908] bnx2x: [bnx2x_exe_queue_free_elem:82(enp3s0f1)]Deleting an exe_queue element | |
| [ 1361.637077] bnx2x: [__bnx2x_vlan_mac_execute_step:1588(enp3s0f1)]vlan_mac_execute_step - trying to take writer lock | |
| [ 1361.639246] bnx2x: [__bnx2x_vlan_mac_h_write_trylock:438(enp3s0f1)]vlan_mac_lock writer - Taken | |
| [ 1361.641452] bnx2x: [__bnx2x_vlan_mac_execute_step:1588(enp3s0f1)]vlan_mac_execute_step - trying to take writer lock | |
| [ 1361.641644] bnx2x: [bnx2x_analyze_link_error:13723(enp3s0f0)]Analyze TX Fault | |
| [ 1361.643698] bnx2x: [__bnx2x_vlan_mac_h_write_trylock:438(enp3s0f1)]vlan_mac_lock writer - Taken | |
| [ 1361.645908] bnx2x: [bnx2x_analyze_link_error:13729(enp3s0f0)]Link changed:[0 0]->1 | |
| [ 1361.645910] bnx2x: [bnx2x_sfp_tx_fault_detection:13877(enp3s0f0)]Change TX_Fault LED: ->0 | |
| [ 1361.648148] bnx2x: [bnx2x_vlan_mac_del_all:2065(enp3s0f1)]vlan_mac_del_all -- taking vlan_mac_lock (reader) | |
| [ 1361.650375] bnx2x: [bnx2x_set_e3_module_fault_led:8587(enp3s0f0)]Setting Fault LED to 0 using pin cfg 1 | |
| [ 1361.652601] bnx2x: [__bnx2x_vlan_mac_h_read_lock:528(enp3s0f1)]vlan_mac_lock - locked reader - number 1 | |
| [ 1361.654873] bnx2x: [bnx2x_set_gpio:2123(enp3s0f0)]Set GPIO 0 (shift 0) -> output low | |
| [ 1361.657141] bnx2x: [bnx2x_vlan_mac_del_all:2085(enp3s0f1)]vlan_mac_del_all -- releasing vlan_mac_lock (reader) | |
| [ 1361.663925] bnx2x: [__bnx2x_vlan_mac_h_read_unlock:574(enp3s0f1)]vlan_mac_lock - decreased readers to 0 | |
| [ 1361.666228] bnx2x: [__bnx2x_vlan_mac_execute_step:1588(enp3s0f1)]vlan_mac_execute_step - trying to take writer lock | |
| [ 1361.668501] bnx2x: [__bnx2x_vlan_mac_h_write_trylock:438(enp3s0f1)]vlan_mac_lock writer - Taken | |
| [ 1361.670770] bnx2x: [bnx2x_set_rx_mode_e2:2525(enp3s0f1)]About to configure 2 rules, rx_accept_flags 0x0, tx_accept_flags 0x0 | |
| [ 1361.673067] bnx2x: [bnx2x_sp_post:3944(enp3s0f1)]SPQE[f] (2:6df280f0) (cmd, common?) (10,1) hw_cid 0 data (2:67756510) type(0x0) left (CQ, EQ) (8,f5) | |
| [ 1361.675417] bnx2x: [bnx2x_config_mcast:3999(enp3s0f1)]o->total_pending_num=1 p->mcast_list_len=1 o->max_cmd_len=16 | |
| [ 1361.675674] bnx2x: [bnx2x_sp_task:5681(enp3s0f1)]sp task invoked | |
| [ 1361.677849] bnx2x: [bnx2x_mcast_handle_current_cmd:3224(enp3s0f1)]p->mcast_list_len=1 | |
| [ 1361.680275] bnx2x: [bnx2x_sp_task:5690(enp3s0f1)]status 2 | |
| [ 1361.682679] bnx2x: [bnx2x_mcast_set_one_rule_e2:2884(enp3s0f1)]Clearing bin 109 | |
| [ 1361.685068] bnx2x: [bnx2x_sp_task:5691(enp3s0f1)]setting interrupt_occurred to 0 | |
| [ 1361.685070] bnx2x: [bnx2x_eq_int:5485(enp3s0f1)]EQ: hw_cons 9 sw_cons 8 bp->eq_spq_left f5 | |
| [ 1361.687470] bnx2x: [bnx2x_mcast_hdl_del:3198(enp3s0f1)]Deleting MAC. 0 left | |
| [ 1361.689880] bnx2x: [bnx2x_eq_int:5653(enp3s0f1)]got rx_mode ramrod | |
| [ 1361.692321] bnx2x: [bnx2x_sp_post:3944(enp3s0f1)]SPQE[10] (2:6df28100) (cmd, common?) (11,1) hw_cid 0 data (2:67756618) type(0x0) left (CQ, EQ) (8,f4) | |
| [ 1361.699438] bnx2x: [bnx2x_sp_task:5681(enp3s0f1)]sp task invoked | |
| [ 1361.701837] bnx2x: [bnx2x_sp_task:5690(enp3s0f1)]status 2 | |
| [ 1361.704221] bnx2x: [bnx2x_sp_task:5691(enp3s0f1)]setting interrupt_occurred to 0 | |
| [ 1361.706647] bnx2x: [bnx2x_eq_int:5485(enp3s0f1)]EQ: hw_cons 10 sw_cons 9 bp->eq_spq_left f5 | |
| [ 1361.709044] bnx2x: [bnx2x_eq_int:5643(enp3s0f1)]got mcast ramrod | |
| [ 1361.711582] bnx2x: [bnx2x_stop_queue:8919(enp3s0f1)]stopping queue 0 cid 0 | |
| [ 1361.713931] bnx2x: [bnx2x_stop_queue:8934(enp3s0f1)]stopping tx-only queue 2 | |
| [ 1361.716308] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f1)]Good state transition: 3(9)->4 | |
| [ 1361.719104] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f1)]pending bit was=0 | |
| [ 1361.721843] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f1)]pending bit now=200 | |
| [ 1361.724564] bnx2x: [bnx2x_sp_post:3944(enp3s0f1)]SPQE[11] (2:6df28110) (cmd, common?) (7,0) hw_cid 2 data (0:0) type(0x0) left (CQ, EQ) (7,f6) | |
| [ 1361.727357] bnx2x: [bnx2x_state_wait:292(enp3s0f1)]waiting for state to become 9 | |
| [ 1361.729732] bnx2x: [bnx2x_sp_event:1818(enp3s0f1)]fp 0 cid 2 got ramrod #7 state is 4000 type is 1 | |
| [ 1361.732065] bnx2x: [bnx2x_sp_event:1849(enp3s0f1)]got MULTI[2] terminate ramrod | |
| [ 1361.734414] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f1)]Completing command 9 for queue 0, setting state to 4 | |
| [ 1361.736770] bnx2x: [bnx2x_queue_comp_cmd:4759(enp3s0f1)]primary cid 0: num tx-only cons 2 | |
| [ 1361.739075] bnx2x: [bnx2x_sp_event:1889(enp3s0f1)]bp->cq_spq_left 8 | |
| [ 1361.742512] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f1)]Good state transition: 4(8)->3 | |
| [ 1361.744814] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f1)]pending bit was=0 | |
| [ 1361.747103] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f1)]pending bit now=100 | |
| [ 1361.749406] bnx2x: [bnx2x_sp_post:3944(enp3s0f1)]SPQE[12] (2:6df28120) (cmd, common?) (4,1) hw_cid 2 data (0:0) type(0x8) left (CQ, EQ) (8,f5) | |
| [ 1361.751729] bnx2x: [bnx2x_state_wait:292(enp3s0f1)]waiting for state to become 8 | |
| [ 1361.751985] bnx2x: [bnx2x_sp_task:5681(enp3s0f1)]sp task invoked | |
| [ 1361.756397] bnx2x: [bnx2x_sp_task:5690(enp3s0f1)]status 2 | |
| [ 1361.758667] bnx2x: [bnx2x_sp_task:5691(enp3s0f1)]setting interrupt_occurred to 0 | |
| [ 1361.760931] bnx2x: [bnx2x_eq_int:5485(enp3s0f1)]EQ: hw_cons 11 sw_cons 10 bp->eq_spq_left f5 | |
| [ 1361.763733] bnx2x: [bnx2x_eq_int:5526(enp3s0f1)]got delete ramrod for MULTI[2] | |
| [ 1361.765992] bnx2x: [bnx2x_cid_to_q_obj:5447(enp3s0f1)]retrieving fp from cid 2 | |
| [ 1361.768223] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f1)]Completing command 8 for queue 0, setting state to 3 | |
| [ 1361.770466] bnx2x: [bnx2x_queue_comp_cmd:4759(enp3s0f1)]primary cid 0: num tx-only cons 1 | |
| [ 1361.774098] bnx2x: [bnx2x_stop_queue:8934(enp3s0f1)]stopping tx-only queue 4 | |
| [ 1361.776278] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f1)]Good state transition: 3(9)->4 | |
| [ 1361.778473] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f1)]pending bit was=0 | |
| [ 1361.780647] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f1)]pending bit now=200 | |
| [ 1361.782782] bnx2x: [bnx2x_sp_post:3944(enp3s0f1)]SPQE[13] (2:6df28130) (cmd, common?) (7,0) hw_cid 4 data (0:0) type(0x0) left (CQ, EQ) (7,f6) | |
| [ 1361.784991] bnx2x: [bnx2x_state_wait:292(enp3s0f1)]waiting for state to become 9 | |
| [ 1361.787173] bnx2x: [bnx2x_sp_event:1818(enp3s0f1)]fp 0 cid 4 got ramrod #7 state is 4000 type is 1 | |
| [ 1361.789377] bnx2x: [bnx2x_sp_event:1849(enp3s0f1)]got MULTI[4] terminate ramrod | |
| [ 1361.791551] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f1)]Completing command 9 for queue 0, setting state to 4 | |
| [ 1361.793750] bnx2x: [bnx2x_queue_comp_cmd:4759(enp3s0f1)]primary cid 0: num tx-only cons 1 | |
| [ 1361.795897] bnx2x: [bnx2x_sp_event:1889(enp3s0f1)]bp->cq_spq_left 8 | |
| [ 1361.799063] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f1)]Good state transition: 4(8)->2 | |
| [ 1361.801201] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f1)]pending bit was=0 | |
| [ 1361.803335] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f1)]pending bit now=100 | |
| [ 1361.805470] bnx2x: [bnx2x_sp_post:3944(enp3s0f1)]SPQE[14] (2:6df28140) (cmd, common?) (4,1) hw_cid 4 data (0:0) type(0x8) left (CQ, EQ) (8,f5) | |
| [ 1361.807619] bnx2x: [bnx2x_state_wait:292(enp3s0f1)]waiting for state to become 8 | |
| [ 1361.807676] bnx2x: [bnx2x_sp_task:5681(enp3s0f1)]sp task invoked | |
| [ 1361.812034] bnx2x: [bnx2x_sp_task:5690(enp3s0f1)]status 2 | |
| [ 1361.814187] bnx2x: [bnx2x_sp_task:5691(enp3s0f1)]setting interrupt_occurred to 0 | |
| [ 1361.816326] bnx2x: [bnx2x_eq_int:5485(enp3s0f1)]EQ: hw_cons 12 sw_cons 11 bp->eq_spq_left f5 | |
| [ 1361.818615] bnx2x: [bnx2x_eq_int:5526(enp3s0f1)]got delete ramrod for MULTI[4] | |
| [ 1361.821777] bnx2x: [bnx2x_cid_to_q_obj:5447(enp3s0f1)]retrieving fp from cid 4 | |
| [ 1361.824934] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f1)]Completing command 8 for queue 0, setting state to 2 | |
| [ 1361.828135] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f1)]Good state transition: 2(7)->6 | |
| [ 1361.830189] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f1)]pending bit was=0 | |
| [ 1361.832204] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f1)]pending bit now=80 | |
| [ 1361.834171] bnx2x: [bnx2x_sp_post:3944(enp3s0f1)]SPQE[15] (2:6df28150) (cmd, common?) (2,0) hw_cid 0 data (0:2) type(0x0) left (CQ, EQ) (7,f6) | |
| [ 1361.836220] bnx2x: [bnx2x_state_wait:292(enp3s0f1)]waiting for state to become 7 | |
| [ 1361.838270] bnx2x: [bnx2x_sp_event:1818(enp3s0f1)]fp 0 cid 0 got ramrod #2 state is 4000 type is 1 | |
| [ 1361.840321] bnx2x: [bnx2x_sp_event:1844(enp3s0f1)]got MULTI[0] halt ramrod | |
| [ 1361.842360] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f1)]Completing command 7 for queue 0, setting state to 6 | |
| [ 1361.844430] bnx2x: [bnx2x_sp_event:1889(enp3s0f1)]bp->cq_spq_left 8 | |
| [ 1361.847303] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f1)]Good state transition: 6(9)->7 | |
| [ 1361.849326] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f1)]pending bit was=0 | |
| [ 1361.851328] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f1)]pending bit now=200 | |
| [ 1361.853349] bnx2x: [bnx2x_sp_post:3944(enp3s0f1)]SPQE[16] (2:6df28160) (cmd, common?) (7,0) hw_cid 0 data (0:0) type(0x0) left (CQ, EQ) (7,f6) | |
| [ 1361.855406] bnx2x: [bnx2x_state_wait:292(enp3s0f1)]waiting for state to become 9 | |
| [ 1361.857926] bnx2x: [bnx2x_sp_event:1818(enp3s0f1)]fp 0 cid 0 got ramrod #7 state is 4000 type is 1 | |
| [ 1361.860016] bnx2x: [bnx2x_sp_event:1849(enp3s0f1)]got MULTI[0] terminate ramrod | |
| [ 1361.862116] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f1)]Completing command 9 for queue 0, setting state to 7 | |
| [ 1361.864245] bnx2x: [bnx2x_sp_event:1889(enp3s0f1)]bp->cq_spq_left 8 | |
| [ 1361.866396] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f1)]Good state transition: 7(8)->0 | |
| [ 1361.868540] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f1)]pending bit was=0 | |
| [ 1361.870704] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f1)]pending bit now=100 | |
| [ 1361.872812] bnx2x: [bnx2x_sp_post:3944(enp3s0f1)]SPQE[17] (2:6df28170) (cmd, common?) (4,1) hw_cid 0 data (0:0) type(0x8) left (CQ, EQ) (8,f5) | |
| [ 1361.875286] bnx2x: [bnx2x_state_wait:292(enp3s0f1)]waiting for state to become 8 | |
| [ 1361.877788] bnx2x: [bnx2x_sp_task:5681(enp3s0f1)]sp task invoked | |
| [ 1361.880253] bnx2x: [bnx2x_sp_task:5690(enp3s0f1)]status 2 | |
| [ 1361.882679] bnx2x: [bnx2x_sp_task:5691(enp3s0f1)]setting interrupt_occurred to 0 | |
| [ 1361.885100] bnx2x: [bnx2x_eq_int:5485(enp3s0f1)]EQ: hw_cons 13 sw_cons 12 bp->eq_spq_left f5 | |
| [ 1361.887541] bnx2x: [bnx2x_eq_int:5526(enp3s0f1)]got delete ramrod for MULTI[0] | |
| [ 1361.889673] bnx2x: [bnx2x_cid_to_q_obj:5447(enp3s0f1)]retrieving fp from cid 0 | |
| [ 1361.891772] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f1)]Completing command 8 for queue 0, setting state to 0 | |
| [ 1361.894131] bnx2x: [bnx2x_stop_queue:8919(enp3s0f1)]stopping queue 1 cid 1 | |
| [ 1361.896215] bnx2x: [bnx2x_stop_queue:8934(enp3s0f1)]stopping tx-only queue 3 | |
| [ 1361.898246] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f1)]Good state transition: 3(9)->4 | |
| [ 1361.900667] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f1)]pending bit was=0 | |
| [ 1361.903081] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f1)]pending bit now=200 | |
| [ 1361.905478] bnx2x: [bnx2x_sp_post:3944(enp3s0f1)]SPQE[18] (2:6df28180) (cmd, common?) (7,0) hw_cid 3 data (0:0) type(0x0) left (CQ, EQ) (7,f6) | |
| [ 1361.907941] bnx2x: [bnx2x_state_wait:292(enp3s0f1)]waiting for state to become 9 | |
| [ 1361.907985] bnx2x: [bnx2x_sp_event:1818(enp3s0f1)]fp 1 cid 3 got ramrod #7 state is 4000 type is 1 | |
| [ 1361.912579] bnx2x: [bnx2x_sp_event:1849(enp3s0f1)]got MULTI[3] terminate ramrod | |
| [ 1361.914726] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f1)]Completing command 9 for queue 1, setting state to 4 | |
| [ 1361.916898] bnx2x: [bnx2x_queue_comp_cmd:4759(enp3s0f1)]primary cid 1: num tx-only cons 2 | |
| [ 1361.919026] bnx2x: [bnx2x_sp_event:1889(enp3s0f1)]bp->cq_spq_left 8 | |
| [ 1361.920135] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f1)]Good state transition: 4(8)->3 | |
| [ 1361.923375] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f1)]pending bit was=0 | |
| [ 1361.925500] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f1)]pending bit now=100 | |
| [ 1361.927605] bnx2x: [bnx2x_sp_post:3944(enp3s0f1)]SPQE[19] (2:6df28190) (cmd, common?) (4,1) hw_cid 3 data (0:0) type(0x8) left (CQ, EQ) (8,f5) | |
| [ 1361.929695] bnx2x: [bnx2x_state_wait:292(enp3s0f1)]waiting for state to become 8 | |
| [ 1361.929757] bnx2x: [bnx2x_sp_task:5681(enp3s0f1)]sp task invoked | |
| [ 1361.933998] bnx2x: [bnx2x_sp_task:5690(enp3s0f1)]status 2 | |
| [ 1361.936086] bnx2x: [bnx2x_sp_task:5691(enp3s0f1)]setting interrupt_occurred to 0 | |
| [ 1361.938209] bnx2x: [bnx2x_eq_int:5485(enp3s0f1)]EQ: hw_cons 14 sw_cons 13 bp->eq_spq_left f5 | |
| [ 1361.940331] bnx2x: [bnx2x_eq_int:5526(enp3s0f1)]got delete ramrod for MULTI[3] | |
| [ 1361.942625] bnx2x: [bnx2x_cid_to_q_obj:5447(enp3s0f1)]retrieving fp from cid 3 | |
| [ 1361.944788] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f1)]Completing command 8 for queue 1, setting state to 3 | |
| [ 1361.946902] bnx2x: [bnx2x_queue_comp_cmd:4759(enp3s0f1)]primary cid 1: num tx-only cons 1 | |
| [ 1361.950098] bnx2x: [bnx2x_stop_queue:8934(enp3s0f1)]stopping tx-only queue 5 | |
| [ 1361.952139] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f1)]Good state transition: 3(9)->4 | |
| [ 1361.954213] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f1)]pending bit was=0 | |
| [ 1361.956250] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f1)]pending bit now=200 | |
| [ 1361.958433] bnx2x: [bnx2x_sp_post:3944(enp3s0f1)]SPQE[1a] (2:6df281a0) (cmd, common?) (7,0) hw_cid 5 data (0:0) type(0x0) left (CQ, EQ) (7,f6) | |
| [ 1361.961279] bnx2x: [bnx2x_state_wait:292(enp3s0f1)]waiting for state to become 9 | |
| [ 1361.961328] bnx2x: [bnx2x_sp_event:1818(enp3s0f1)]fp 1 cid 5 got ramrod #7 state is 4000 type is 1 | |
| [ 1361.966556] bnx2x: [bnx2x_sp_event:1849(enp3s0f1)]got MULTI[5] terminate ramrod | |
| [ 1361.968669] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f1)]Completing command 9 for queue 1, setting state to 4 | |
| [ 1361.970799] bnx2x: [bnx2x_queue_comp_cmd:4759(enp3s0f1)]primary cid 1: num tx-only cons 1 | |
| [ 1361.972959] bnx2x: [bnx2x_sp_event:1889(enp3s0f1)]bp->cq_spq_left 8 | |
| [ 1361.974079] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f1)]Good state transition: 4(8)->2 | |
| [ 1361.977336] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f1)]pending bit was=0 | |
| [ 1361.979479] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f1)]pending bit now=100 | |
| [ 1361.981583] bnx2x: [bnx2x_sp_post:3944(enp3s0f1)]SPQE[1b] (2:6df281b0) (cmd, common?) (4,1) hw_cid 5 data (0:0) type(0x8) left (CQ, EQ) (8,f5) | |
| [ 1361.983751] bnx2x: [bnx2x_state_wait:292(enp3s0f1)]waiting for state to become 8 | |
| [ 1361.983796] bnx2x: [bnx2x_sp_task:5681(enp3s0f1)]sp task invoked | |
| [ 1361.988008] bnx2x: [bnx2x_sp_task:5690(enp3s0f1)]status 2 | |
| [ 1361.990088] bnx2x: [bnx2x_sp_task:5691(enp3s0f1)]setting interrupt_occurred to 0 | |
| [ 1361.992171] bnx2x: [bnx2x_eq_int:5485(enp3s0f1)]EQ: hw_cons 15 sw_cons 14 bp->eq_spq_left f5 | |
| [ 1361.994278] bnx2x: [bnx2x_eq_int:5526(enp3s0f1)]got delete ramrod for MULTI[5] | |
| [ 1361.996506] bnx2x: [bnx2x_cid_to_q_obj:5447(enp3s0f1)]retrieving fp from cid 5 | |
| [ 1361.999776] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f1)]Completing command 8 for queue 1, setting state to 2 | |
| [ 1362.002131] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f1)]Good state transition: 2(7)->6 | |
| [ 1362.004167] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f1)]pending bit was=0 | |
| [ 1362.006174] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f1)]pending bit now=80 | |
| [ 1362.008191] bnx2x: [bnx2x_sp_post:3944(enp3s0f1)]SPQE[1c] (2:6df281c0) (cmd, common?) (2,0) hw_cid 1 data (0:3) type(0x0) left (CQ, EQ) (7,f6) | |
| [ 1362.010209] bnx2x: [bnx2x_state_wait:292(enp3s0f1)]waiting for state to become 7 | |
| [ 1362.010271] bnx2x: [bnx2x_sp_event:1818(enp3s0f1)]fp 1 cid 1 got ramrod #2 state is 4000 type is 1 | |
| [ 1362.015795] bnx2x: [bnx2x_sp_event:1844(enp3s0f1)]got MULTI[1] halt ramrod | |
| [ 1362.018500] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f1)]Completing command 7 for queue 1, setting state to 6 | |
| [ 1362.020988] bnx2x: [bnx2x_sp_event:1889(enp3s0f1)]bp->cq_spq_left 8 | |
| [ 1362.021911] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f1)]Good state transition: 6(9)->7 | |
| [ 1362.025587] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f1)]pending bit was=0 | |
| [ 1362.027701] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f1)]pending bit now=200 | |
| [ 1362.029759] bnx2x: [bnx2x_sp_post:3944(enp3s0f1)]SPQE[1d] (2:6df281d0) (cmd, common?) (7,0) hw_cid 1 data (0:0) type(0x0) left (CQ, EQ) (7,f6) | |
| [ 1362.031894] bnx2x: [bnx2x_state_wait:292(enp3s0f1)]waiting for state to become 9 | |
| [ 1362.031919] bnx2x: [bnx2x_sp_event:1818(enp3s0f1)]fp 1 cid 1 got ramrod #7 state is 4000 type is 1 | |
| [ 1362.036432] bnx2x: [bnx2x_sp_event:1849(enp3s0f1)]got MULTI[1] terminate ramrod | |
| [ 1362.038760] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f1)]Completing command 9 for queue 1, setting state to 7 | |
| [ 1362.041125] bnx2x: [bnx2x_sp_event:1889(enp3s0f1)]bp->cq_spq_left 8 | |
| [ 1362.042075] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f1)]Good state transition: 7(8)->0 | |
| [ 1362.046375] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f1)]pending bit was=0 | |
| [ 1362.048487] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f1)]pending bit now=100 | |
| [ 1362.050593] bnx2x: [bnx2x_sp_post:3944(enp3s0f1)]SPQE[1e] (2:6df281e0) (cmd, common?) (4,1) hw_cid 1 data (0:0) type(0x8) left (CQ, EQ) (8,f5) | |
| [ 1362.052723] bnx2x: [bnx2x_state_wait:292(enp3s0f1)]waiting for state to become 8 | |
| [ 1362.052786] bnx2x: [bnx2x_sp_task:5681(enp3s0f1)]sp task invoked | |
| [ 1362.057042] bnx2x: [bnx2x_sp_task:5690(enp3s0f1)]status 2 | |
| [ 1362.059187] bnx2x: [bnx2x_sp_task:5691(enp3s0f1)]setting interrupt_occurred to 0 | |
| [ 1362.061311] bnx2x: [bnx2x_eq_int:5485(enp3s0f1)]EQ: hw_cons 16 sw_cons 15 bp->eq_spq_left f5 | |
| [ 1362.063440] bnx2x: [bnx2x_eq_int:5526(enp3s0f1)]got delete ramrod for MULTI[1] | |
| [ 1362.065524] bnx2x: [bnx2x_cid_to_q_obj:5447(enp3s0f1)]retrieving fp from cid 1 | |
| [ 1362.068753] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f1)]Completing command 8 for queue 1, setting state to 0 | |
| [ 1362.071955] bnx2x: [bnx2x_func_chk_transition:5896(enp3s0f1)]Good function state transition: 2(2)->1 | |
| [ 1362.074053] bnx2x: [bnx2x_sp_post:3944(enp3s0f1)]SPQE[1f] (2:6df281f0) (cmd, common?) (2,1) hw_cid 0 data (0:0) type(0x8) left (CQ, EQ) (8,f5) | |
| [ 1362.076183] bnx2x: [bnx2x_state_wait:292(enp3s0f1)]waiting for state to become 2 | |
| [ 1362.076245] bnx2x: [bnx2x_sp_task:5681(enp3s0f1)]sp task invoked | |
| [ 1362.080498] bnx2x: [bnx2x_sp_task:5690(enp3s0f1)]status 2 | |
| [ 1362.082664] bnx2x: [bnx2x_sp_task:5691(enp3s0f1)]setting interrupt_occurred to 0 | |
| [ 1362.085149] bnx2x: [bnx2x_eq_int:5485(enp3s0f1)]EQ: hw_cons 17 sw_cons 16 bp->eq_spq_left f5 | |
| [ 1362.087629] bnx2x: [bnx2x_eq_int:5596(enp3s0f1)]got FUNC_STOP ramrod | |
| [ 1362.090091] bnx2x: [bnx2x_func_state_change_comp:5760(enp3s0f1)]Completing command 2 for func 0, setting state to 1 | |
| [ 1362.094107] bnx2x: [bnx2x_igu_int_disable:888(enp3s0f1)]write 1 to IGU | |
| [ 1362.096270] bnx2x: [bnx2x_free_msix_irqs:1626(enp3s0f1)]released sp irq (134) | |
| [ 1362.098379] bnx2x: [bnx2x_free_msix_irqs:1640(enp3s0f1)]about to release fp #0->136 irq | |
| [ 1362.100790] bnx2x: [bnx2x_free_msix_irqs:1640(enp3s0f1)]about to release fp #1->137 irq | |
| [ 1362.103006] bnx2x: [bnx2x_func_chk_transition:5896(enp3s0f1)]Good function state transition: 1(3)->0 | |
| [ 1362.105100] bnx2x: [bnx2x_func_hw_reset:6112(enp3s0f1)]function 1 reset_phase 20100000 | |
| [ 1362.240128] bnx2x: [bnx2x_func_state_change_comp:5760(enp3s0f1)]Completing command 3 for func 0, setting state to 0 | |
| [ 1362.245769] bnx2x: [bnx2x_state_wait:292(enp3s0f1)]waiting for state to become 3 | |
| [ 1362.286118] bnx2x: [bnx2x_vlan_mac_del_all:2065(enp3s0f1)]vlan_mac_del_all -- taking vlan_mac_lock (reader) | |
| [ 1362.290379] bnx2x: [__bnx2x_vlan_mac_h_read_lock:528(enp3s0f1)]vlan_mac_lock - locked reader - number 1 | |
| [ 1362.294647] bnx2x: [bnx2x_vlan_mac_del_all:2085(enp3s0f1)]vlan_mac_del_all -- releasing vlan_mac_lock (reader) | |
| [ 1362.298941] bnx2x: [__bnx2x_vlan_mac_h_read_unlock:574(enp3s0f1)]vlan_mac_lock - decreased readers to 0 | |
| [ 1362.301174] bnx2x: [bnx2x_config_vlan_mac:1961(enp3s0f1)]RAMROD_DRV_CLR_ONLY requested: clearing a pending bit. | |
| [ 1362.303298] bnx2x: [__bnx2x_vlan_mac_execute_step:1588(enp3s0f1)]vlan_mac_execute_step - trying to take writer lock | |
| [ 1362.305468] bnx2x: [__bnx2x_vlan_mac_h_write_trylock:438(enp3s0f1)]vlan_mac_lock writer - Taken | |
| [ 1362.307629] bnx2x: [bnx2x_vlan_mac_del_all:2065(enp3s0f1)]vlan_mac_del_all -- taking vlan_mac_lock (reader) | |
| [ 1362.309832] bnx2x: [__bnx2x_vlan_mac_h_read_lock:528(enp3s0f1)]vlan_mac_lock - locked reader - number 1 | |
| [ 1362.311970] bnx2x: [bnx2x_vlan_mac_del_all:2085(enp3s0f1)]vlan_mac_del_all -- releasing vlan_mac_lock (reader) | |
| [ 1362.314163] bnx2x: [__bnx2x_vlan_mac_h_read_unlock:574(enp3s0f1)]vlan_mac_lock - decreased readers to 0 | |
| [ 1362.316379] bnx2x: [bnx2x_config_vlan_mac:1961(enp3s0f1)]RAMROD_DRV_CLR_ONLY requested: clearing a pending bit. | |
| [ 1362.318592] bnx2x: [__bnx2x_vlan_mac_execute_step:1588(enp3s0f1)]vlan_mac_execute_step - trying to take writer lock | |
| [ 1362.320846] bnx2x: [__bnx2x_vlan_mac_h_write_trylock:438(enp3s0f1)]vlan_mac_lock writer - Taken | |
| [ 1362.323947] bnx2x: [bnx2x_free_fp_mem_at:4404(enp3s0f1)]freeing tx memory of fp 0 cos 0 cid 0 | |
| [ 1362.326225] bnx2x: [bnx2x_free_fp_mem_at:4404(enp3s0f1)]freeing tx memory of fp 0 cos 1 cid 2 | |
| [ 1362.328461] bnx2x: [bnx2x_free_fp_mem_at:4404(enp3s0f1)]freeing tx memory of fp 0 cos 2 cid 4 | |
| [ 1362.330659] bnx2x: [bnx2x_free_fp_mem_at:4404(enp3s0f1)]freeing tx memory of fp 1 cos 0 cid 1 | |
| [ 1362.332822] bnx2x: [bnx2x_free_fp_mem_at:4404(enp3s0f1)]freeing tx memory of fp 1 cos 1 cid 3 | |
| [ 1362.334971] bnx2x: [bnx2x_free_fp_mem_at:4404(enp3s0f1)]freeing tx memory of fp 1 cos 2 cid 5 | |
| [ 1362.337141] bnx2x: [bnx2x_clear_pf_load:4543(enp3s0f1)]Old GEN_REG_VAL=0x00000201 | |
| [ 1362.339215] bnx2x: [bnx2x_disable_close_the_gate:9497(enp3s0f1)]Disabling "close the gates" | |
| [ 1362.341334] bnx2x: [bnx2x_nic_unload:3152(enp3s0f1)]Ending NIC unload | |
| [ 1362.386247] bnx2x: [bnx2x_nic_unload:2980(enp3s0f0)]Starting NIC unload | |
| [ 1362.391933] bnx2x: [bnx2x_vlan_mac_del_all:2065(enp3s0f0)]vlan_mac_del_all -- taking vlan_mac_lock (reader) | |
| [ 1362.395578] bnx2x: [__bnx2x_vlan_mac_h_read_lock:528(enp3s0f0)]vlan_mac_lock - locked reader - number 1 | |
| [ 1362.398629] bnx2x: [bnx2x_exe_queue_alloc_elem:251(enp3s0f0)]Allocating a new exe_queue element | |
| [ 1362.401638] bnx2x: [bnx2x_check_mac_del:702(enp3s0f0)]Checking MAC fc:15:b4:0c:2a:20 for DEL command | |
| [ 1362.404696] bnx2x: [bnx2x_vlan_mac_del_all:2085(enp3s0f0)]vlan_mac_del_all -- releasing vlan_mac_lock (reader) | |
| [ 1362.407742] bnx2x: [__bnx2x_vlan_mac_h_read_unlock:574(enp3s0f0)]vlan_mac_lock - decreased readers to 0 | |
| [ 1362.409896] bnx2x: [__bnx2x_vlan_mac_execute_step:1588(enp3s0f0)]vlan_mac_execute_step - trying to take writer lock | |
| [ 1362.411971] bnx2x: [__bnx2x_vlan_mac_h_write_trylock:438(enp3s0f0)]vlan_mac_lock writer - Taken | |
| [ 1362.414083] bnx2x: [bnx2x_check_mac_del:702(enp3s0f0)]Checking MAC fc:15:b4:0c:2a:20 for DEL command | |
| [ 1362.416193] bnx2x: [bnx2x_set_one_mac_e2:930(enp3s0f0)]About to delete MAC fc:15:b4:0c:2a:20 for Queue 2 | |
| [ 1362.418275] bnx2x: [bnx2x_sp_post:3944(enp3s0f0)]SPQE[e] (2:69c130e0) (cmd, common?) (9,1) hw_cid 0 data (2:69040000) type(0x0) left (CQ, EQ) (8,f5) | |
| [ 1362.420429] bnx2x: [bnx2x_check_mac_del:702(enp3s0f0)]Checking MAC fc:15:b4:0c:2a:20 for DEL command | |
| [ 1362.422566] bnx2x: [bnx2x_vlan_mac_del_all:2065(enp3s0f0)]vlan_mac_del_all -- taking vlan_mac_lock (reader) | |
| [ 1362.422615] bnx2x: [bnx2x_sp_task:5681(enp3s0f0)]sp task invoked | |
| [ 1362.424847] bnx2x: [__bnx2x_vlan_mac_h_read_lock:528(enp3s0f0)]vlan_mac_lock - locked reader - number 1 | |
| [ 1362.427078] bnx2x: [bnx2x_sp_task:5690(enp3s0f0)]status 2 | |
| [ 1362.429286] bnx2x: [bnx2x_vlan_mac_del_all:2085(enp3s0f0)]vlan_mac_del_all -- releasing vlan_mac_lock (reader) | |
| [ 1362.429287] bnx2x: [__bnx2x_vlan_mac_h_read_unlock:574(enp3s0f0)]vlan_mac_lock - decreased readers to 0 | |
| [ 1362.429288] bnx2x: [__bnx2x_vlan_mac_execute_step:1588(enp3s0f0)]vlan_mac_execute_step - trying to take writer lock | |
| [ 1362.429288] bnx2x: [__bnx2x_vlan_mac_h_write_trylock:438(enp3s0f0)]vlan_mac_lock writer - Taken | |
| [ 1362.429290] bnx2x: [bnx2x_state_wait:292(enp3s0f0)]waiting for state to become 0 | |
| [ 1362.443363] bnx2x: [bnx2x_sp_task:5691(enp3s0f0)]setting interrupt_occurred to 0 | |
| [ 1362.445641] bnx2x: [bnx2x_eq_int:5485(enp3s0f0)]EQ: hw_cons 8 sw_cons 7 bp->eq_spq_left f5 | |
| [ 1362.447895] bnx2x: [bnx2x_eq_int:5633(enp3s0f0)]got (un)set vlan/mac ramrod | |
| [ 1362.450161] bnx2x: [bnx2x_handle_classification_eqe:5311(enp3s0f0)]Got SETUP_MAC completions | |
| [ 1362.452365] bnx2x: [bnx2x_exe_queue_free_elem:82(enp3s0f0)]Deleting an exe_queue element | |
| [ 1362.454576] bnx2x: [__bnx2x_vlan_mac_execute_step:1588(enp3s0f0)]vlan_mac_execute_step - trying to take writer lock | |
| [ 1362.456851] bnx2x: [__bnx2x_vlan_mac_h_write_trylock:438(enp3s0f0)]vlan_mac_lock writer - Taken | |
| [ 1362.459152] bnx2x: [__bnx2x_vlan_mac_execute_step:1588(enp3s0f0)]vlan_mac_execute_step - trying to take writer lock | |
| [ 1362.461390] bnx2x: [__bnx2x_vlan_mac_h_write_trylock:438(enp3s0f0)]vlan_mac_lock writer - Taken | |
| [ 1362.463649] bnx2x: [bnx2x_vlan_mac_del_all:2065(enp3s0f0)]vlan_mac_del_all -- taking vlan_mac_lock (reader) | |
| [ 1362.465898] bnx2x: [__bnx2x_vlan_mac_h_read_lock:528(enp3s0f0)]vlan_mac_lock - locked reader - number 1 | |
| [ 1362.468528] bnx2x: [bnx2x_vlan_mac_del_all:2085(enp3s0f0)]vlan_mac_del_all -- releasing vlan_mac_lock (reader) | |
| [ 1362.471172] bnx2x: [__bnx2x_vlan_mac_h_read_unlock:574(enp3s0f0)]vlan_mac_lock - decreased readers to 0 | |
| [ 1362.473836] bnx2x: [__bnx2x_vlan_mac_execute_step:1588(enp3s0f0)]vlan_mac_execute_step - trying to take writer lock | |
| [ 1362.476561] bnx2x: [__bnx2x_vlan_mac_h_write_trylock:438(enp3s0f0)]vlan_mac_lock writer - Taken | |
| [ 1362.478927] bnx2x: [bnx2x_set_rx_mode_e2:2525(enp3s0f0)]About to configure 2 rules, rx_accept_flags 0x0, tx_accept_flags 0x0 | |
| [ 1362.481263] bnx2x: [bnx2x_sp_post:3944(enp3s0f0)]SPQE[f] (2:69c130f0) (cmd, common?) (10,1) hw_cid 0 data (2:69040510) type(0x0) left (CQ, EQ) (8,f5) | |
| [ 1362.483629] bnx2x: [bnx2x_config_mcast:3999(enp3s0f0)]o->total_pending_num=1 p->mcast_list_len=1 o->max_cmd_len=16 | |
| [ 1362.486001] bnx2x: [bnx2x_mcast_handle_current_cmd:3224(enp3s0f0)]p->mcast_list_len=1 | |
| [ 1362.486055] bnx2x: [bnx2x_sp_task:5681(enp3s0f0)]sp task invoked | |
| [ 1362.488432] bnx2x: [bnx2x_mcast_set_one_rule_e2:2884(enp3s0f0)]Clearing bin 109 | |
| [ 1362.490827] bnx2x: [bnx2x_sp_task:5690(enp3s0f0)]status 2 | |
| [ 1362.493211] bnx2x: [bnx2x_mcast_hdl_del:3198(enp3s0f0)]Deleting MAC. 0 left | |
| [ 1362.495567] bnx2x: [bnx2x_sp_task:5691(enp3s0f0)]setting interrupt_occurred to 0 | |
| [ 1362.495570] bnx2x: [bnx2x_eq_int:5485(enp3s0f0)]EQ: hw_cons 9 sw_cons 8 bp->eq_spq_left f5 | |
| [ 1362.497909] bnx2x: [bnx2x_sp_post:3944(enp3s0f0)]SPQE[10] (2:69c13100) (cmd, common?) (11,1) hw_cid 0 data (2:69040618) type(0x0) left (CQ, EQ) (8,f4) | |
| [ 1362.500235] bnx2x: [bnx2x_eq_int:5653(enp3s0f0)]got rx_mode ramrod | |
| [ 1362.507324] bnx2x: [bnx2x_sp_task:5681(enp3s0f0)]sp task invoked | |
| [ 1362.509632] bnx2x: [bnx2x_sp_task:5690(enp3s0f0)]status 2 | |
| [ 1362.511875] bnx2x: [bnx2x_sp_task:5691(enp3s0f0)]setting interrupt_occurred to 0 | |
| [ 1362.514133] bnx2x: [bnx2x_eq_int:5485(enp3s0f0)]EQ: hw_cons 10 sw_cons 9 bp->eq_spq_left f5 | |
| [ 1362.516336] bnx2x: [bnx2x_eq_int:5643(enp3s0f0)]got mcast ramrod | |
| [ 1362.526112] bnx2x: [bnx2x_stop_queue:8919(enp3s0f0)]stopping queue 0 cid 0 | |
| [ 1362.528662] bnx2x: [bnx2x_stop_queue:8934(enp3s0f0)]stopping tx-only queue 2 | |
| [ 1362.531225] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f0)]Good state transition: 3(9)->4 | |
| [ 1362.533817] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f0)]pending bit was=0 | |
| [ 1362.536440] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f0)]pending bit now=200 | |
| [ 1362.538969] bnx2x: [bnx2x_sp_post:3944(enp3s0f0)]SPQE[11] (2:69c13110) (cmd, common?) (7,0) hw_cid 2 data (0:0) type(0x0) left (CQ, EQ) (7,f6) | |
| [ 1362.541575] bnx2x: [bnx2x_state_wait:292(enp3s0f0)]waiting for state to become 9 | |
| [ 1362.541625] bnx2x: [bnx2x_sp_event:1818(enp3s0f0)]fp 0 cid 2 got ramrod #7 state is 4000 type is 1 | |
| [ 1362.546778] bnx2x: [bnx2x_sp_event:1849(enp3s0f0)]got MULTI[2] terminate ramrod | |
| [ 1362.549434] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f0)]Completing command 9 for queue 0, setting state to 4 | |
| [ 1362.552184] bnx2x: [bnx2x_queue_comp_cmd:4759(enp3s0f0)]primary cid 0: num tx-only cons 2 | |
| [ 1362.554908] bnx2x: [bnx2x_sp_event:1889(enp3s0f0)]bp->cq_spq_left 8 | |
| [ 1362.556127] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f0)]Good state transition: 4(8)->3 | |
| [ 1362.559992] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f0)]pending bit was=0 | |
| [ 1362.562292] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f0)]pending bit now=100 | |
| [ 1362.564550] bnx2x: [bnx2x_sp_post:3944(enp3s0f0)]SPQE[12] (2:69c13120) (cmd, common?) (4,1) hw_cid 2 data (0:0) type(0x8) left (CQ, EQ) (8,f5) | |
| [ 1362.566865] bnx2x: [bnx2x_state_wait:292(enp3s0f0)]waiting for state to become 8 | |
| [ 1362.569194] bnx2x: [bnx2x_sp_task:5681(enp3s0f0)]sp task invoked | |
| [ 1362.572123] bnx2x: [bnx2x_sp_task:5690(enp3s0f0)]status 2 | |
| [ 1362.574490] bnx2x: [bnx2x_sp_task:5691(enp3s0f0)]setting interrupt_occurred to 0 | |
| [ 1362.576781] bnx2x: [bnx2x_eq_int:5485(enp3s0f0)]EQ: hw_cons 11 sw_cons 10 bp->eq_spq_left f5 | |
| [ 1362.579022] bnx2x: [bnx2x_eq_int:5526(enp3s0f0)]got delete ramrod for MULTI[2] | |
| [ 1362.581260] bnx2x: [bnx2x_cid_to_q_obj:5447(enp3s0f0)]retrieving fp from cid 2 | |
| [ 1362.583452] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f0)]Completing command 8 for queue 0, setting state to 3 | |
| [ 1362.585696] bnx2x: [bnx2x_queue_comp_cmd:4759(enp3s0f0)]primary cid 0: num tx-only cons 1 | |
| [ 1362.588098] bnx2x: [bnx2x_stop_queue:8934(enp3s0f0)]stopping tx-only queue 4 | |
| [ 1362.590289] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f0)]Good state transition: 3(9)->4 | |
| [ 1362.592434] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f0)]pending bit was=0 | |
| [ 1362.594757] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f0)]pending bit now=200 | |
| [ 1362.597629] bnx2x: [bnx2x_sp_post:3944(enp3s0f0)]SPQE[13] (2:69c13130) (cmd, common?) (7,0) hw_cid 4 data (0:0) type(0x0) left (CQ, EQ) (7,f6) | |
| [ 1362.600574] bnx2x: [bnx2x_state_wait:292(enp3s0f0)]waiting for state to become 9 | |
| [ 1362.602804] bnx2x: [bnx2x_sp_event:1818(enp3s0f0)]fp 0 cid 4 got ramrod #7 state is 4000 type is 1 | |
| [ 1362.604954] bnx2x: [bnx2x_sp_event:1849(enp3s0f0)]got MULTI[4] terminate ramrod | |
| [ 1362.607126] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f0)]Completing command 9 for queue 0, setting state to 4 | |
| [ 1362.609339] bnx2x: [bnx2x_queue_comp_cmd:4759(enp3s0f0)]primary cid 0: num tx-only cons 1 | |
| [ 1362.611492] bnx2x: [bnx2x_sp_event:1889(enp3s0f0)]bp->cq_spq_left 8 | |
| [ 1362.614726] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f0)]Good state transition: 4(8)->2 | |
| [ 1362.616871] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f0)]pending bit was=0 | |
| [ 1362.619001] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f0)]pending bit now=100 | |
| [ 1362.621129] bnx2x: [bnx2x_sp_post:3944(enp3s0f0)]SPQE[14] (2:69c13140) (cmd, common?) (4,1) hw_cid 4 data (0:0) type(0x8) left (CQ, EQ) (8,f5) | |
| [ 1362.623274] bnx2x: [bnx2x_state_wait:292(enp3s0f0)]waiting for state to become 8 | |
| [ 1362.623332] bnx2x: [bnx2x_sp_task:5681(enp3s0f0)]sp task invoked | |
| [ 1362.627672] bnx2x: [bnx2x_sp_task:5690(enp3s0f0)]status 2 | |
| [ 1362.629773] bnx2x: [bnx2x_sp_task:5691(enp3s0f0)]setting interrupt_occurred to 0 | |
| [ 1362.631873] bnx2x: [bnx2x_eq_int:5485(enp3s0f0)]EQ: hw_cons 12 sw_cons 11 bp->eq_spq_left f5 | |
| [ 1362.633982] bnx2x: [bnx2x_eq_int:5526(enp3s0f0)]got delete ramrod for MULTI[4] | |
| [ 1362.636320] bnx2x: [bnx2x_cid_to_q_obj:5447(enp3s0f0)]retrieving fp from cid 4 | |
| [ 1362.638610] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f0)]Completing command 8 for queue 0, setting state to 2 | |
| [ 1362.642116] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f0)]Good state transition: 2(7)->6 | |
| [ 1362.644133] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f0)]pending bit was=0 | |
| [ 1362.646118] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f0)]pending bit now=80 | |
| [ 1362.648102] bnx2x: [bnx2x_sp_post:3944(enp3s0f0)]SPQE[15] (2:69c13150) (cmd, common?) (2,0) hw_cid 0 data (0:2) type(0x0) left (CQ, EQ) (7,f6) | |
| [ 1362.650114] bnx2x: [bnx2x_state_wait:292(enp3s0f0)]waiting for state to become 7 | |
| [ 1362.652165] bnx2x: [bnx2x_sp_event:1818(enp3s0f0)]fp 0 cid 0 got ramrod #2 state is 4000 type is 1 | |
| [ 1362.654196] bnx2x: [bnx2x_sp_event:1844(enp3s0f0)]got MULTI[0] halt ramrod | |
| [ 1362.657137] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f0)]Completing command 7 for queue 0, setting state to 6 | |
| [ 1362.660112] bnx2x: [bnx2x_sp_event:1889(enp3s0f0)]bp->cq_spq_left 8 | |
| [ 1362.663020] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f0)]Good state transition: 6(9)->7 | |
| [ 1362.665008] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f0)]pending bit was=0 | |
| [ 1362.667001] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f0)]pending bit now=200 | |
| [ 1362.669021] bnx2x: [bnx2x_sp_post:3944(enp3s0f0)]SPQE[16] (2:69c13160) (cmd, common?) (7,0) hw_cid 0 data (0:0) type(0x0) left (CQ, EQ) (7,f6) | |
| [ 1362.671078] bnx2x: [bnx2x_state_wait:292(enp3s0f0)]waiting for state to become 9 | |
| [ 1362.673160] bnx2x: [bnx2x_sp_event:1818(enp3s0f0)]fp 0 cid 0 got ramrod #7 state is 4000 type is 1 | |
| [ 1362.673161] bnx2x: [bnx2x_sp_event:1849(enp3s0f0)]got MULTI[0] terminate ramrod | |
| [ 1362.673162] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f0)]Completing command 9 for queue 0, setting state to 7 | |
| [ 1362.673163] bnx2x: [bnx2x_sp_event:1889(enp3s0f0)]bp->cq_spq_left 8 | |
| [ 1362.682103] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f0)]Good state transition: 7(8)->0 | |
| [ 1362.684236] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f0)]pending bit was=0 | |
| [ 1362.686392] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f0)]pending bit now=100 | |
| [ 1362.688501] bnx2x: [bnx2x_sp_post:3944(enp3s0f0)]SPQE[17] (2:69c13170) (cmd, common?) (4,1) hw_cid 0 data (0:0) type(0x8) left (CQ, EQ) (8,f5) | |
| [ 1362.690639] bnx2x: [bnx2x_state_wait:292(enp3s0f0)]waiting for state to become 8 | |
| [ 1362.692842] bnx2x: [bnx2x_sp_task:5681(enp3s0f0)]sp task invoked | |
| [ 1362.695120] bnx2x: [bnx2x_sp_task:5690(enp3s0f0)]status 2 | |
| [ 1362.697330] bnx2x: [bnx2x_sp_task:5691(enp3s0f0)]setting interrupt_occurred to 0 | |
| [ 1362.699548] bnx2x: [bnx2x_eq_int:5485(enp3s0f0)]EQ: hw_cons 13 sw_cons 12 bp->eq_spq_left f5 | |
| [ 1362.701768] bnx2x: [bnx2x_eq_int:5526(enp3s0f0)]got delete ramrod for MULTI[0] | |
| [ 1362.704795] bnx2x: [bnx2x_cid_to_q_obj:5447(enp3s0f0)]retrieving fp from cid 0 | |
| [ 1362.706960] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f0)]Completing command 8 for queue 0, setting state to 0 | |
| [ 1362.710117] bnx2x: [bnx2x_stop_queue:8919(enp3s0f0)]stopping queue 1 cid 1 | |
| [ 1362.712198] bnx2x: [bnx2x_stop_queue:8934(enp3s0f0)]stopping tx-only queue 3 | |
| [ 1362.714260] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f0)]Good state transition: 3(9)->4 | |
| [ 1362.716282] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f0)]pending bit was=0 | |
| [ 1362.718464] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f0)]pending bit now=200 | |
| [ 1362.721397] bnx2x: [bnx2x_sp_post:3944(enp3s0f0)]SPQE[18] (2:69c13180) (cmd, common?) (7,0) hw_cid 3 data (0:0) type(0x0) left (CQ, EQ) (7,f6) | |
| [ 1362.724429] bnx2x: [bnx2x_state_wait:292(enp3s0f0)]waiting for state to become 9 | |
| [ 1362.726611] bnx2x: [bnx2x_sp_event:1818(enp3s0f0)]fp 1 cid 3 got ramrod #7 state is 4000 type is 1 | |
| [ 1362.728706] bnx2x: [bnx2x_sp_event:1849(enp3s0f0)]got MULTI[3] terminate ramrod | |
| [ 1362.730820] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f0)]Completing command 9 for queue 1, setting state to 4 | |
| [ 1362.732951] bnx2x: [bnx2x_queue_comp_cmd:4759(enp3s0f0)]primary cid 1: num tx-only cons 2 | |
| [ 1362.735041] bnx2x: [bnx2x_sp_event:1889(enp3s0f0)]bp->cq_spq_left 8 | |
| [ 1362.738254] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f0)]Good state transition: 4(8)->3 | |
| [ 1362.740344] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f0)]pending bit was=0 | |
| [ 1362.742471] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f0)]pending bit now=100 | |
| [ 1362.744563] bnx2x: [bnx2x_sp_post:3944(enp3s0f0)]SPQE[19] (2:69c13190) (cmd, common?) (4,1) hw_cid 3 data (0:0) type(0x8) left (CQ, EQ) (8,f5) | |
| [ 1362.746654] bnx2x: [bnx2x_state_wait:292(enp3s0f0)]waiting for state to become 8 | |
| [ 1362.748820] bnx2x: [bnx2x_sp_task:5681(enp3s0f0)]sp task invoked | |
| [ 1362.750978] bnx2x: [bnx2x_sp_task:5690(enp3s0f0)]status 2 | |
| [ 1362.753051] bnx2x: [bnx2x_sp_task:5691(enp3s0f0)]setting interrupt_occurred to 0 | |
| [ 1362.755171] bnx2x: [bnx2x_eq_int:5485(enp3s0f0)]EQ: hw_cons 14 sw_cons 13 bp->eq_spq_left f5 | |
| [ 1362.757264] bnx2x: [bnx2x_eq_int:5526(enp3s0f0)]got delete ramrod for MULTI[3] | |
| [ 1362.759888] bnx2x: [bnx2x_cid_to_q_obj:5447(enp3s0f0)]retrieving fp from cid 3 | |
| [ 1362.762532] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f0)]Completing command 8 for queue 1, setting state to 3 | |
| [ 1362.765229] bnx2x: [bnx2x_queue_comp_cmd:4759(enp3s0f0)]primary cid 1: num tx-only cons 1 | |
| [ 1362.769836] bnx2x: [bnx2x_stop_queue:8934(enp3s0f0)]stopping tx-only queue 5 | |
| [ 1362.771901] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f0)]Good state transition: 3(9)->4 | |
| [ 1362.773923] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f0)]pending bit was=0 | |
| [ 1362.776014] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f0)]pending bit now=200 | |
| [ 1362.778048] bnx2x: [bnx2x_sp_post:3944(enp3s0f0)]SPQE[1a] (2:69c131a0) (cmd, common?) (7,0) hw_cid 5 data (0:0) type(0x0) left (CQ, EQ) (7,f6) | |
| [ 1362.780164] bnx2x: [bnx2x_state_wait:292(enp3s0f0)]waiting for state to become 9 | |
| [ 1362.782291] bnx2x: [bnx2x_sp_event:1818(enp3s0f0)]fp 1 cid 5 got ramrod #7 state is 4000 type is 1 | |
| [ 1362.784388] bnx2x: [bnx2x_sp_event:1849(enp3s0f0)]got MULTI[5] terminate ramrod | |
| [ 1362.786502] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f0)]Completing command 9 for queue 1, setting state to 4 | |
| [ 1362.788627] bnx2x: [bnx2x_queue_comp_cmd:4759(enp3s0f0)]primary cid 1: num tx-only cons 1 | |
| [ 1362.790712] bnx2x: [bnx2x_sp_event:1889(enp3s0f0)]bp->cq_spq_left 8 | |
| [ 1362.793837] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f0)]Good state transition: 4(8)->2 | |
| [ 1362.795965] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f0)]pending bit was=0 | |
| [ 1362.798055] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f0)]pending bit now=100 | |
| [ 1362.800113] bnx2x: [bnx2x_sp_post:3944(enp3s0f0)]SPQE[1b] (2:69c131b0) (cmd, common?) (4,1) hw_cid 5 data (0:0) type(0x8) left (CQ, EQ) (8,f5) | |
| [ 1362.802200] bnx2x: [bnx2x_state_wait:292(enp3s0f0)]waiting for state to become 8 | |
| [ 1362.804357] bnx2x: [bnx2x_sp_task:5681(enp3s0f0)]sp task invoked | |
| [ 1362.806493] bnx2x: [bnx2x_sp_task:5690(enp3s0f0)]status 2 | |
| [ 1362.808601] bnx2x: [bnx2x_sp_task:5691(enp3s0f0)]setting interrupt_occurred to 0 | |
| [ 1362.810666] bnx2x: [bnx2x_eq_int:5485(enp3s0f0)]EQ: hw_cons 15 sw_cons 14 bp->eq_spq_left f5 | |
| [ 1362.812799] bnx2x: [bnx2x_eq_int:5526(enp3s0f0)]got delete ramrod for MULTI[5] | |
| [ 1362.815251] bnx2x: [bnx2x_cid_to_q_obj:5447(enp3s0f0)]retrieving fp from cid 5 | |
| [ 1362.817362] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f0)]Completing command 8 for queue 1, setting state to 2 | |
| [ 1362.820148] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f0)]Good state transition: 2(7)->6 | |
| [ 1362.822209] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f0)]pending bit was=0 | |
| [ 1362.824204] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f0)]pending bit now=80 | |
| [ 1362.826285] bnx2x: [bnx2x_sp_post:3944(enp3s0f0)]SPQE[1c] (2:69c131c0) (cmd, common?) (2,0) hw_cid 1 data (0:3) type(0x0) left (CQ, EQ) (7,f6) | |
| [ 1362.828824] bnx2x: [bnx2x_state_wait:292(enp3s0f0)]waiting for state to become 7 | |
| [ 1362.831332] bnx2x: [bnx2x_sp_event:1818(enp3s0f0)]fp 1 cid 1 got ramrod #2 state is 4000 type is 1 | |
| [ 1362.833868] bnx2x: [bnx2x_sp_event:1844(enp3s0f0)]got MULTI[1] halt ramrod | |
| [ 1362.836364] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f0)]Completing command 7 for queue 1, setting state to 6 | |
| [ 1362.838422] bnx2x: [bnx2x_sp_event:1889(enp3s0f0)]bp->cq_spq_left 8 | |
| [ 1362.841266] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f0)]Good state transition: 6(9)->7 | |
| [ 1362.843314] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f0)]pending bit was=0 | |
| [ 1362.845390] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f0)]pending bit now=200 | |
| [ 1362.847416] bnx2x: [bnx2x_sp_post:3944(enp3s0f0)]SPQE[1d] (2:69c131d0) (cmd, common?) (7,0) hw_cid 1 data (0:0) type(0x0) left (CQ, EQ) (7,f6) | |
| [ 1362.849525] bnx2x: [bnx2x_state_wait:292(enp3s0f0)]waiting for state to become 9 | |
| [ 1362.852087] bnx2x: [bnx2x_sp_event:1818(enp3s0f0)]fp 1 cid 1 got ramrod #7 state is 4000 type is 1 | |
| [ 1362.854178] bnx2x: [bnx2x_sp_event:1849(enp3s0f0)]got MULTI[1] terminate ramrod | |
| [ 1362.856271] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f0)]Completing command 9 for queue 1, setting state to 7 | |
| [ 1362.858393] bnx2x: [bnx2x_sp_event:1889(enp3s0f0)]bp->cq_spq_left 8 | |
| [ 1362.858838] bnx2x: [bnx2x_queue_chk_transition:5648(enp3s0f0)]Good state transition: 7(8)->0 | |
| [ 1362.862750] bnx2x: [bnx2x_queue_state_change:4670(enp3s0f0)]pending bit was=0 | |
| [ 1362.864866] bnx2x: [bnx2x_queue_state_change:4672(enp3s0f0)]pending bit now=100 | |
| [ 1362.866989] bnx2x: [bnx2x_sp_post:3944(enp3s0f0)]SPQE[1e] (2:69c131e0) (cmd, common?) (4,1) hw_cid 1 data (0:0) type(0x8) left (CQ, EQ) (8,f5) | |
| [ 1362.869127] bnx2x: [bnx2x_state_wait:292(enp3s0f0)]waiting for state to become 8 | |
| [ 1362.871938] bnx2x: [bnx2x_sp_task:5681(enp3s0f0)]sp task invoked | |
| [ 1362.874174] bnx2x: [bnx2x_sp_task:5690(enp3s0f0)]status 2 | |
| [ 1362.876315] bnx2x: [bnx2x_sp_task:5691(enp3s0f0)]setting interrupt_occurred to 0 | |
| [ 1362.878406] bnx2x: [bnx2x_eq_int:5485(enp3s0f0)]EQ: hw_cons 16 sw_cons 15 bp->eq_spq_left f5 | |
| [ 1362.880545] bnx2x: [bnx2x_eq_int:5526(enp3s0f0)]got delete ramrod for MULTI[1] | |
| [ 1362.882636] bnx2x: [bnx2x_cid_to_q_obj:5447(enp3s0f0)]retrieving fp from cid 1 | |
| [ 1362.884756] bnx2x: [bnx2x_queue_comp_cmd:4755(enp3s0f0)]Completing command 8 for queue 1, setting state to 0 | |
| [ 1362.888158] bnx2x: [bnx2x_func_chk_transition:5896(enp3s0f0)]Good function state transition: 2(2)->1 | |
| [ 1362.890287] bnx2x: [bnx2x_sp_post:3944(enp3s0f0)]SPQE[1f] (2:69c131f0) (cmd, common?) (2,1) hw_cid 0 data (0:0) type(0x8) left (CQ, EQ) (8,f5) | |
| [ 1362.892396] bnx2x: [bnx2x_state_wait:292(enp3s0f0)]waiting for state to become 2 | |
| [ 1362.894752] bnx2x: [bnx2x_sp_task:5681(enp3s0f0)]sp task invoked | |
| [ 1362.897804] bnx2x: [bnx2x_sp_task:5690(enp3s0f0)]status 2 | |
| [ 1362.900843] bnx2x: [bnx2x_sp_task:5691(enp3s0f0)]setting interrupt_occurred to 0 | |
| [ 1362.903723] bnx2x: [bnx2x_eq_int:5485(enp3s0f0)]EQ: hw_cons 17 sw_cons 16 bp->eq_spq_left f5 | |
| [ 1362.906607] bnx2x: [bnx2x_eq_int:5596(enp3s0f0)]got FUNC_STOP ramrod | |
| [ 1362.908814] bnx2x: [bnx2x_func_state_change_comp:5760(enp3s0f0)]Completing command 2 for func 0, setting state to 1 | |
| [ 1362.911639] bnx2x: [bnx2x_igu_int_disable:888(enp3s0f0)]write 1 to IGU | |
| [ 1362.913787] bnx2x: [bnx2x_free_msix_irqs:1626(enp3s0f0)]released sp irq (130) | |
| [ 1362.915933] bnx2x: [bnx2x_free_msix_irqs:1640(enp3s0f0)]about to release fp #0->132 irq | |
| [ 1362.918506] bnx2x: [bnx2x_free_msix_irqs:1640(enp3s0f0)]about to release fp #1->133 irq | |
| [ 1362.921529] bnx2x: [bnx2x_func_chk_transition:5896(enp3s0f0)]Good function state transition: 1(3)->0 | |
| [ 1362.923688] bnx2x: [bnx2x_func_hw_reset:6112(enp3s0f0)]function 0 reset_phase 20100000 | |
| [ 1363.060090] bnx2x: [bnx2x_func_state_change_comp:5760(enp3s0f0)]Completing command 3 for func 0, setting state to 0 | |
| [ 1363.064336] bnx2x: [bnx2x_state_wait:292(enp3s0f0)]waiting for state to become 3 | |
| [ 1363.126121] bnx2x: [bnx2x_vlan_mac_del_all:2065(enp3s0f0)]vlan_mac_del_all -- taking vlan_mac_lock (reader) | |
| [ 1363.130080] bnx2x: [__bnx2x_vlan_mac_h_read_lock:528(enp3s0f0)]vlan_mac_lock - locked reader - number 1 | |
| [ 1363.134010] bnx2x: [bnx2x_vlan_mac_del_all:2085(enp3s0f0)]vlan_mac_del_all -- releasing vlan_mac_lock (reader) | |
| [ 1363.137992] bnx2x: [__bnx2x_vlan_mac_h_read_unlock:574(enp3s0f0)]vlan_mac_lock - decreased readers to 0 | |
| [ 1363.140225] bnx2x: [bnx2x_config_vlan_mac:1961(enp3s0f0)]RAMROD_DRV_CLR_ONLY requested: clearing a pending bit. | |
| [ 1363.142407] bnx2x: [__bnx2x_vlan_mac_execute_step:1588(enp3s0f0)]vlan_mac_execute_step - trying to take writer lock | |
| [ 1363.144583] bnx2x: [__bnx2x_vlan_mac_h_write_trylock:438(enp3s0f0)]vlan_mac_lock writer - Taken | |
| [ 1363.146747] bnx2x: [bnx2x_vlan_mac_del_all:2065(enp3s0f0)]vlan_mac_del_all -- taking vlan_mac_lock (reader) | |
| [ 1363.148935] bnx2x: [__bnx2x_vlan_mac_h_read_lock:528(enp3s0f0)]vlan_mac_lock - locked reader - number 1 | |
| [ 1363.151078] bnx2x: [bnx2x_vlan_mac_del_all:2085(enp3s0f0)]vlan_mac_del_all -- releasing vlan_mac_lock (reader) | |
| [ 1363.153271] bnx2x: [__bnx2x_vlan_mac_h_read_unlock:574(enp3s0f0)]vlan_mac_lock - decreased readers to 0 | |
| [ 1363.155460] bnx2x: [bnx2x_config_vlan_mac:1961(enp3s0f0)]RAMROD_DRV_CLR_ONLY requested: clearing a pending bit. | |
| [ 1363.157724] bnx2x: [__bnx2x_vlan_mac_execute_step:1588(enp3s0f0)]vlan_mac_execute_step - trying to take writer lock | |
| [ 1363.159953] bnx2x: [__bnx2x_vlan_mac_h_write_trylock:438(enp3s0f0)]vlan_mac_lock writer - Taken | |
| [ 1363.163087] bnx2x: [bnx2x_free_fp_mem_at:4404(enp3s0f0)]freeing tx memory of fp 0 cos 0 cid 0 | |
| [ 1363.165332] bnx2x: [bnx2x_free_fp_mem_at:4404(enp3s0f0)]freeing tx memory of fp 0 cos 1 cid 2 | |
| [ 1363.167549] bnx2x: [bnx2x_free_fp_mem_at:4404(enp3s0f0)]freeing tx memory of fp 0 cos 2 cid 4 | |
| [ 1363.169765] bnx2x: [bnx2x_free_fp_mem_at:4404(enp3s0f0)]freeing tx memory of fp 1 cos 0 cid 1 | |
| [ 1363.171918] bnx2x: [bnx2x_free_fp_mem_at:4404(enp3s0f0)]freeing tx memory of fp 1 cos 1 cid 3 | |
| [ 1363.174106] bnx2x: [bnx2x_free_fp_mem_at:4404(enp3s0f0)]freeing tx memory of fp 1 cos 2 cid 5 | |
| [ 1363.176293] bnx2x: [bnx2x_clear_pf_load:4543(enp3s0f0)]Old GEN_REG_VAL=0x00000001 | |
| [ 1363.178372] bnx2x: [bnx2x_disable_close_the_gate:9497(enp3s0f0)]Disabling "close the gates" | |
| [ 1363.180477] bnx2x: [bnx2x_nic_unload:3152(enp3s0f0)]Ending NIC unload |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment