Created
May 21, 2024 10:48
-
-
Save uditkumarti/23a00c313e1c28b62537aab733a585df to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot SPL 2024.07-rc2-00403-gacdd712ee6-dirty (May 21 2024 - 16:04:11 +0530) | |
| SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)') | |
| Trying to boot from UART | |
| CSkipping authentication on GP device | |
| Skipping authentication on GP device | |
| Skipping authentication on GP device | |
| Skipping authentication on GP device | |
| Loaded 976091 bytes | |
| Loading Environment from nowhere... OK | |
| init_env from device 7 not supported! | |
| Starting ATF on ARM64 core... | |
| NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb3-dirty | |
| NOTICE: BL31: Built : 00:42:57, Jan 13 2023 | |
| I/TC: | |
| I/TC: OP-TEE version: 3.20.0 (gcc version 11.3.0 (GCC)) #1 Fri Jan 20 15:42:54 UTC 2023 aarch64 | |
| I/TC: WARNING: This OP-TEE configuration might be insecure! | |
| I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html | |
| I/TC: Primary CPU initializing | |
| I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)') | |
| I/TC: HUK Initialized | |
| I/TC: Activated SA2UL device | |
| I/TC: Fixing SA2UL firewall owner for GP device | |
| I/TC: Enabled firewalls for SA2UL TRNG device | |
| I/TC: SA2UL TRNG initialized | |
| I/TC: SA2UL Drivers initialized | |
| I/TC: Primary CPU switching to normal world boot | |
| U-Boot SPL 2024.07-rc2-00403-gacdd712ee6-dirty (May 21 2024 - 16:04:26 +0530) | |
| SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)') | |
| Detected: J7X-BASE-CPB rev E3 | |
| Detected: J7X-VSC8514-ETH rev E2 | |
| Trying to boot from UART | |
| CSkipping authentication on GP device | |
| Loaded 1219115 bytes | |
| U-Boot 2024.07-rc2-00403-gacdd712ee6-dirty (May 21 2024 - 16:04:26 +0530) | |
| SoC: J7200 SR2.0 GP | |
| Model: Texas Instruments J7200 EVM | |
| Board: J7200X-PM2-SOM rev E8 | |
| DRAM: 4 GiB | |
| Core: 91 devices, 30 uclasses, devicetree: separate | |
| Flash: 0 Bytes | |
| MMC: mmc@4f80000: 0, mmc@4fb0000: 1 | |
| Loading Environment from nowhere... OK | |
| In: serial@2800000 | |
| Out: serial@2800000 | |
| Err: serial@2800000 | |
| am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1 | |
| Detected: J7X-BASE-CPB rev E3 | |
| Detected: J7X-VSC8514-ETH rev E2 | |
| Net: eth0: ethernet@46000000port@1 | |
| Hit any key to stop autoboot: 2 0 | |
| => | |
| => | |
| => | |
| => | |
| => #-----------------counter=0----------------- | |
| => version | |
| U-Boot 2024.07-rc2-00403-gacdd712ee6-dirty (May 21 2024 - 16:04:26 +0530) | |
| => setenv dorprocboot 1 | |
| => run boot_rprocs | |
| k3_r5f_rproc r5f@41000000: Core 1 is already in use. No rproc commands work | |
| k3_r5f_rproc r5f@41400000: Core 2 is already in use. No rproc commands work | |
| 73912 bytes read in 16 ms (4.4 MiB/s) | |
| Load Remote Processor 2 with data@addr=0x82000000 73912 bytes: Success! | |
| 73912 bytes read in 16 ms (4.4 MiB/s) | |
| Load Remote Processor 3 with data@addr=0x82000000 73912 bytes: Success! | |
| => |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot SPL 2024.07-rc2-00403-gacdd712ee6-dirty (May 21 2024 - 16:04:11 +0530) | |
| SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.3--v09.02.03 (Kool Koala)') | |
| Trying to boot from UART | |
| CLoaded 976091 bytes | |
| Loading Environment from nowhere... OK | |
| init_env from device 7 not supported! | |
| Starting ATF on ARM64 core... | |
| NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb3-dirty | |
| NOTICE: BL31: Built : 00:42:57, Jan 13 2023 | |
| I/TC: | |
| I/TC: OP-TEE version: 3.20.0 (gcc version 11.3.0 (GCC)) #1 Fri Jan 20 15:42:54 UTC 2023 aarch64 | |
| I/TC: WARNING: This OP-TEE configuration might be insecure! | |
| I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html | |
| I/TC: Primary CPU initializing | |
| I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.3--v09.02.03 (Kool Koala)') | |
| I/TC: HUK Initialized | |
| I/TC: Activated SA2UL device | |
| I/TC: Enabled firewalls for SA2UL TRNG device | |
| I/TC: SA2UL TRNG initialized | |
| I/TC: SA2UL Drivers initialized | |
| I/TC: Primary CPU switching to normal world boot | |
| U-Boot SPL 2024.07-rc2-00403-gacdd712ee6-dirty (May 21 2024 - 16:04:26 +0530) | |
| SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.3--v09.02.03 (Kool Koala)') | |
| Detected: J7X-BASE-CPB rev E3 | |
| Detected: J7X-VSC8514-ETH rev E2 | |
| Trying to boot from UART | |
| CLoaded 1219115 bytes | |
| U-Boot 2024.07-rc2-00403-gacdd712ee6-dirty (May 21 2024 - 16:04:26 +0530) | |
| SoC: J7200 SR2.0 HS-SE | |
| Model: Texas Instruments J7200 EVM | |
| Board: J7200X-PM2-SOM rev E8 | |
| DRAM: 4 GiB | |
| Core: 93 devices, 32 uclasses, devicetree: separate | |
| Flash: 0 Bytes | |
| MMC: mmc@4f80000: 0, mmc@4fb0000: 1 | |
| Loading Environment from nowhere... OK | |
| In: serial@2800000 | |
| Out: serial@2800000 | |
| Err: serial@2800000 | |
| am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1 | |
| Detected: J7X-BASE-CPB rev E3 | |
| Detected: J7X-VSC8514-ETH rev E2 | |
| Net: eth0: ethernet@46000000port@1 | |
| Hit any key to stop autoboot: 2 0 | |
| => | |
| => | |
| => | |
| => | |
| => #-----------------counter=0----------------- | |
| => version | |
| U-Boot 2024.07-rc2-00403-gacdd712ee6-dirty (May 21 2024 - 16:04:26 +0530) | |
| => setenv dorprocboot 1 | |
| => run boot_rprocs | |
| k3_r5f_rproc r5f@41000000: Core 1 is already in use. No rproc commands work | |
| k3_r5f_rproc r5f@41400000: Core 2 is already in use. No rproc commands work | |
| 75592 bytes read in 93 ms (793 KiB/s) | |
| Authentication passed | |
| Load Remote Processor 2 with data@addr=0x82000000 75592 bytes: Success! | |
| 75592 bytes read in 97 ms (760.7 KiB/s) | |
| Authentication passed | |
| Load Remote Processor 3 with data@addr=0x82000000 75592 bytes: Success! | |
| => |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment