title.json

title.json

[  
   "titel":[  
      "ABS00001.pdf":"O 001 - DEVELOPMENT OF QUICK DRYING CASING MATERIAL FOR ABLAST FURNACE",
      "ABS00002.pdf":"O 002 - ASSESSING THE CHEMICAL WEAR RESISTANCE OF BLASTFURNACE CERAMIC CUP MATERIALS AT TATA STEEL IN IJMUIDEN",
      "ABS00003.pdf":"O 003 - SHOTCRETING CASTABLES FOR BLAST-FURNACE HOT REPAIRS",
      "ABS00004.pdf":"O 004 - PREMATURE WEAR IN THE HEARTH OF A BLAST FURNACE ANDITS DIMINUTION BY THE APPLICATION OF TITANIUM DIOXIDE",
      "ABS00005.pdf":"O 007 - REFRACTORY CASTABLES FOR MAIN RUNNERS - DEVELOPMENTSFOR NEW CHALLENGES IN BLAST FURNACE CASTHOUSE OPERATION",
      "ABS00006.pdf":"O 008 - COMPARISON OF BLAST FURNACE PLUGGING PRACTICE INEUROPE AND INDIA",
      "ABS00007.pdf":"O 009 - TILTING RUNNERS: REFRACTORY SOLUTIONS FOR HIGH IRONIMPACT RESISTANCE",
      "ABS00008.pdf":"O 010 - IMPROVEMENT OF HOT METAL LADLE LIFE WITH LININGTEMPERATURE CONTROL",
      "ABS00009.pdf":"O 011 - IMPROVEMENT OF THE REFRACTORY LINING IN THE LD- VESSELAT VOESTALPINE STAHL GMBH LINZ",
      "ABS00010.pdf":"O 012 - HIGH PERFORMANCE SCRAP IMPACT PANEL IN CONVERTERSDEVELOPED USING INNOVATIVE TEST METHOD",
      "ABS00011.pdf":"O 013 - MICRO-ZONING OF REFRACTORIES IN STEEL LADLES - A LOGICALAPPROACH FOR EFFECTIVE PERFORMANCE CUSTOMIZATION",
      "ABS00012.pdf":"O 014 - OPTIMIZATION OF THE STEEL LADLE TOP TING AT HKM",
      "ABS00013.pdf":"O 015 - DEVELOPMENT OF HIGH PERFORMANCE SPINEL BRICK FORSTEEL LADLE APPLICATIONS",
      "ABS00014.pdf":"O 016 - INFLUENCE OF MICROSTRUCTURAL DEVELOPMENT ON SLAGCORROSION RESISTANCE OF UNBURNED AL2O3-MGO BRICK",
      "ABS00015.pdf":"O 017 - SLAG ENTRAINMENT IN STEEL LADLES IMPACTING REFRACTORYWEAR",
      "ABS00016.pdf":"O 018 - IMPROVEMENT OF BOF LINING LIFE AFTER REVAMPING ATISDEMIR WORKS",
      "ABS00017.pdf":"O 019 - WEAR OF MAGNESIA BRICKS IN THE PERMANENT LINING OF ALADLE TANK DEGASSING UNIT",
      "ABS00018.pdf":"O 020 - LATEST DEVELOPMENTS IN RH DEGASSER SNORKELS",
      "ABS00019.pdf":"O 021 - INFLUENCE OF CREEP ON THE THERMOMECHANICAL BEHAVIOROF A RH-SNORKEL",
      "ABS00020.pdf":"O 022 - DEVELOPMENT OF RH-DEGASSER LINING CONCEPTS ATVOESTALPINE STAHL GMBH - AN OVERVIEW",
      "ABS00021.pdf":"O 023 - PROPERTIES OF MGO-SPINEL BRICK AND ITS APPLICATION IN RHDEGASSER IN CHINA",
      "ABS00022.pdf":"O 024 - SPINEL FORMATION AND TECHNICAL PROPERTIES OFALUMAGCARBON BRICKS WITH DIFFERENT ALUMINA AGGREGATES",
      "ABS00023.pdf":"O 026 - DEVELOPMENT OF A NOVEL HYBRID METHOD FOR THEPRODUCTION OF MACROPOROUS FOAM CERAMICS",
      "ABS00024.pdf":"O 027 - A WATER MODELLING COMPARISON OF HYBRID PLUG, SLOTPLUG AND POROUS PLUG DESIGNS",
      "ABS00025.pdf":"O 028 - DYNAMIC PURGE PLUG; A NEW DIMENSION TO STEEL LADLE GASPURGING TECHNOLOGIES",
      "ABS00026.pdf":"O 029 - LADLE WELL FILLER - THE KEY TO HIGH FREE OPENING RATES",
      "ABS00027.pdf":"O 030 - NEW SLIDE GATE SYSTEM FOR HIGH REFRACTORIES LIFE",
      "ABS00028.pdf":"O 031 - IMPROVEMENT OF CORROSION RESISTANCE BY THE FORMATIONOF DENSE LAYER IN SLIDE GATE PLATE",
      "ABS00029.pdf":"O 032 - INFLUENCE OF SPECIMEN SHAPE AND THE SPECIMEN/PRESSUREPLATE INTERFACE ON THE COLD CRUSHING STRENGTH",
      "ABS00030.pdf":"O 033 - MICROSTRUCTURAL DETERIORATION OF ALUMINA-CARBONREFRACTORIES FOR SLIDING GATE PLATES DUE TO REACTION WITHMOLTEN STEEL",
      "ABS00031.pdf":"O 034 - DESIGN OF HIGH PERFORMING CHEMICALLY BONDED SLIDEGATE PLATES FOR CASTING OF ALLOY STEEL AND MILD STEEL",
      "ABS00032.pdf":"O 035 - THE ACTUAL TEST RESULTS OF A SLIDE GATE PLATE USING LOWTHERMAL EXPANSION ZRO2 SYSTEM RAW MATERIALS",
      "ABS00033.pdf":"O 036 - CARBON BONDED REFRACTORY COMPOSITES",
      "ABS00034.pdf":"O 037 - FLOW CONTROL REFRACTORY DESIGN OPTIMISATION BYMODELLING AND SIMULATION",
      "ABS00035.pdf":"O 038 - SAFE USE OF ISOSTATICALLY PRODUCED REFRACTORYCOMPONENTS AT CC DUISBURG-BRUCKHAUSEN (TKSE AG)",
      "ABS00036.pdf":"O 039 - CORROSION OF ALUMINA REFRACTORY BY INGOT CASTINGSTEELS",
      "ABS00037.pdf":"O 040 - HIGH DURABILITY CARBON-FREE LINER SUBMERGED ENTRYNOZZLE",
      "ABS00038.pdf":"O 041 - APPLICATION OF DRY COATING TECHNIQUE FOR CC TUNDISH",
      "ABS00039.pdf":"O 042 - COMPARISON OF TWO DIFFERENT TUNDISH LININGS ATVOESTALPINE STAHL GMBH IN LINZ, AUSTRIA - A CHEMICAL ANDMINERALOGICAL APPROACH",
      "ABS00040.pdf":"O 043 - ALUMINA-GRAPHITE BASED FUNCTIONAL COMPONENTS FORAPPLICATION UNDER INDUSTRIAL CONDITIONS",
      "ABS00041.pdf":"O 044 - INFLUENCE OF MOLTEN STEEL ON EROSION RESISTANCE OFMGO-GRAPHITE MATERIAL FOR CONTINUOUS CASTING",
      "ABS00042.pdf":"O 045 - PRODUCTION TECHNOLOGIES FOR AND PROPERTIES OF PLANARAND CYLINDRICAL REFRACTORIES WITH GRADED MICROSTRUCTURE",
      "ABS00043.pdf":"O 046 - IMPROVING CASTABLES WITH RECYCLED AGGREGATESTHROUGH AN OPTIMIZED MONO-CALCIUM BINDER",
      "ABS00044.pdf":"O 047 - HYDRATION OF CALCIUM ALUMINATE CEMENT PHASES CA ANDCA2 IN REFRACTORY APPLICATIONS",
      "ABS00045.pdf":"O 048 - THE OPTIMISATION OF THE CARBON FOOTPRINT OF CALCIUMALUMINATE CEMENT CONTAINING CASTABLES",
      "ABS00046.pdf":"O 049 - EFFECT OF MAGNESIUM FLUORIDE ON THE HYDRATION OFMAGNESIA CASTABLES",
      "ABS00047.pdf":"O 050 - INFLUENCE OF ADDITIVES ON THE CRYSTALLISATION OFCALCIUM SILICATE HYDRATES UNDER HYDROTHERMAL CONDITIONS",
      "ABS00048.pdf":"O 051 - INFLUENCE OF BINDING SYSTEM ON PROPERTIES OF HIGHALUMINA CASTABLES INCORPORATED WITH SILICON POWDER AFTERCARBON EMBEDED FIRING",
      "ABS00049.pdf":"O 052 - EFFECT OF BINDING TYPES ON MICROSTURCTURE OF HIGHALUMINA CASTABLES CONTAINING SI POWDERS AFTER NITRIDATION",
      "ABS00050.pdf":"O 053 - SOL-BONDED ALUMINA-SILICA MONOLITHICS - FUNDAMENTALS,PROPERTIES AND APPLICATIONS",
      "ABS00051.pdf":"O 054 - PREPARATION OF AL2O3-SIO2 SOL AND APPLICATION INCORUNDUM-MULLITE CASTABLE",
      "ABS00052.pdf":"O 055 - REFRACTORY GEL-BONDED CASTABLES WITH REDUCED AMOUNTOF WATER AND HIGHER FLOW",
      "ABS00053.pdf":"O 056 - INFLUENCE OF DISPERSANTS TYPE AND AMOUNT ON THESTRUCTURE RHEOLOGICAL PROPERTIES OF VIBROCAST GRAIN MIXESFROM CAO-STABILIZED ZRO2",
      "ABS00054.pdf":"O 057 - CASE STUDIES - STEAM EXPLOSION ON LOW CEMENT CASTABLEDURING INDUSTRIAL APPLICATION",
      "ABS00055.pdf":"O 058 - THE IMPACT OF PERMEABILITY ENHANCERS IN RAPID DRYINGCASTABLES ON THERMOMECHANICAL PROPERTIES AND WEARRESISTANCE",
      "ABS00056.pdf":"O 059 - ENHANCEMENT OF PERMEABILITY FOR A RAPID DRY-OUT OFREFRACTORY CASTABLES",
      "ABS00057.pdf":"O 060 - TOWARDS ROBUST SINTERING OF DRY VIBRATED LININGS ININDUCTION FURNACES IN VERSATILE CONDITIONS: A SOLUTION WITHREFRACTORY PAINTS",
      "ABS00058.pdf":"O 061 - INFLUENCE OF THE COUPLED EFFECT OF THERMAL GRADIENTAND CHEMICAL ATTACK ON THE SPALLING BEHAVIOR OF AN ALUMINAREFRACTORY CASTABLE",
      "ABS00059.pdf":"O 062 - GEL BONDED CEMENT FREE SHOTCRETE",
      "ABS00060.pdf":"O 063 - DESIGN OF HIGH-ALUMINA MGO-BONDED REFRACTORIES BASEDON THE BNG (BOUNDARY NUCLEATION AND GROWTH) MODEL",
      "ABS00061.pdf":"O 064 - THE VALUE OF ADDITIVES IN REFRACTORY CASTABLES -CASTABLES WITHOUT SILICA FUME",
      "ABS00062.pdf":"O 065 - THE VALUE OF ADDITIVES IN REFRACTORY CASTABLES - SILICAFUME CONTAINING CASTABLES",
      "ABS00063.pdf":"O 066 - EFFECT OF SODIUM ON THE THERMOMECHANICAL PROPERTIESAND MICROSTRUCTURE OF CALCIUM ALUMINATE CEMENT-BONDEDCASTABLES",
      "ABS00064.pdf":"O 067 - MAGNESIA - CARBON MONOLITHIC, NOVEL REFRACTORYSOLUTION",
      "ABS00065.pdf":"O 068 - DEVEOPMENT OF CEMENT-FREE MGO CASTABLE BYCONTROLLING ITS HYDRATION BEHAVIOUR",
      "ABS00066.pdf":"O 069 - INFLUENCE OF ZIRCONIA DOPING AGENT ON THE FATIGUE OFHIGH ALUMINA REFRACTORY CASTABLES AT ELEVATED TEMPERATURE",
      "ABS00067.pdf":"O 070 - EFFECT OF MICROSILICA ADDITION ON THE PROPERTIES OFBAUXITE-ANDALUSITE BASED CASTABLES AT THE PRESENCE OFCOLLOIDAL SILICA BINDER",
      "ABS00068.pdf":"O 071 - EFFECT OF THE REACTIONS AMONG SPINEL,MGO AND AL2O3 ONTHE MICROSTRUCTURES AND PROPERTIES OF THE MATRICES OF AL2O3-MGO CASTABLES",
      "ABS00069.pdf":"O 072 - PROPERTIES IMPROVEMENT OF MULLITE BASED LIGHTWEIGHTCASTABLE BY ADDING RAW AND LIGHT-CALCINED COAL MEASUREKAOLIN",
      "ABS00070.pdf":"O 073 - NEW LIGHTWEIGHT AGGREGATES AND INSULATING CASTABLESCOMPRISING OF THEM",
      "ABS00071.pdf":"O 074 - THERMOMECHANICAL AND THERMO-HYDRAL SIMULATIONS OFTHE FIRST DRYING STAGE OF A REFRACTORY CONCRETE PART",
      "ABS00072.pdf":"O 075 - THE BINARY ZRO2-SIO2 AS EXPLORED BY CONTAINERLESS AEROACOUSTICLEVITATION",
      "ABS00073.pdf":"O 076 - VIBROCAST SHAPES FOR GLASS APPLICATIONS",
      "ABS00074.pdf":"O 077 - COMPARISM OF MECHANISMS AND CORROSION RESISTANCE OFMG- AND Y-STABILIZED ZIRCONIA IN SILICATE SLAGS",
      "ABS00075.pdf":"O 078 - STUDY OF THE PLASTICITY INDUCED BY THE ZIRCONIA PHASETRANSFORMATION IN HIGH ZIRCONIA REFRACTORIES",
      "ABS00076.pdf":"O 079 - THERMOMECHANICAL NUMERICAL SIMULATION OF THE COOLINGDOWNOF HIGH ZIRCONIA FUSED-CAST REFRACTORY BLOCKS",
      "ABS00077.pdf":"O 080 - INFLUENCE OF THE SURFACE CHEMISTRY ON THE FILTRATIONOF ALUMINUM",
      "ABS00078.pdf":"O 082 - EVALUATION OF DEHYDRATION MECHANISM DURING HEATING OFHYDRATED CALCIUM ZIRCONIUM ALUMINATE PASTE",
      "ABS00079.pdf":"O 083 - THERMO-MECHANICAL BENEFITS OF A RIGID INSULATION LAYERON IRON AND STEEL LADLE SHELL LIFESPAN",
      "ABS00080.pdf":"O 084 - REFRACTORY WEAR IN LEAD, ZINC AND COPPER FURNACES",
      "ABS00081.pdf":"O 085 - INFLUENCE OF FEO/SIO2 RATIO OF ZNO-RICH FAYALITE SLAGSON THE DEGRADATION OF MAGNESIA-CHROMITE REFRACTORIES UNDERREDUCING ATMOSPHERE",
      "ABS00082.pdf":"O 086 - UNDERSTANDING THE INTERACTION OF CALCIUM ZIRCONATE INCONTACT WITH TITANIUM AND TITANIUM ALLOY MELTS",
      "ABS00083.pdf":"O 087 - INTERFACIAL REACTION BETWEEN MAGNESIA-CHROMEREFRACTORY AND IRON SILICATE SLAG MELT",
      "ABS00084.pdf":"O 088 - PROTECTING METALLIC ANCHORS AND VESSEL FROM ALKALICORROSION : A SOLUTION WITH REFRACTORY PAINTS",
      "ABS00085.pdf":"O 089 - EFFECT OF SPINEL CONTENT OF LIGHTWEIGHT AGGREGATES ONTHE REACTION CHARATERISTICS OF PERICLASE-SPINEL REFRACTORIESWITH CEMENT CLINKER",
      "ABS00086.pdf":"O 090 - SUSTAINABLE INSULATION TECHNOLOGY FOR ENERGY SAVING ININDUSTRIAL KILNS",
      "ABS00087.pdf":"O 091 - MONOLITHIC SOLUTION FOR LINING CEMENT KILNS: INNOVATIVECONCEPT & COMPARISON VERSUS BRICKS",
      "ABS00088.pdf":"O 092 - ROTARY DRUM FURNACE FOR TESTING THE STABILITY OFREFRACTORIES USED IN CEMENT ROTARY KILNS AT THE PRESENCE OFSECONDARY FUEL RESIDUES",
      "ABS00089.pdf":"O 093 - MAGNESIA BRICKS CONTAINING IRON SPINEL -TROUBLESHOOTERS FOR THERMOMECHANICALLY STRESSED KILNS",
      "ABS00090.pdf":"O 094 - STRUCTURAL AND MICROSTRUCTURAL STUDY ON HERCYNITEAND ITS SOLID SOLUTIONS",
      "ABS00091.pdf":"O 095 - REACTIVITY OF SEMI-ANTHRACITE COAL AND SINTERED MGOCHROMEREFRACTORIES IN ROTARY KILN",
      "ABS00092.pdf":"O 096 - THE CORROSION BEHAVIOR OF MGO/CAZRO3 MATRIX INCONTACT WITH PORTLAND CLINKER",
      "ABS00093.pdf":"O 097 - MICROSTRUCTURAL CHARACTERIZATION OF ARC-MELTEDREFRACTORY PRODUCTS",
      "ABS00094.pdf":"O 098 - FUTURE CHALLENGES OF REFRACTORY RESEARCH ANDINDUSTRY",
      "ABS00095.pdf":"O 099 - POLITICAL & ECONOMIC CHALLENGES FACING INDIANREFRACTORY INDUSTRY",
      "ABS00096.pdf":"O 101 - ALKALI SALT CORROSION OF CALCIUM SILICATES",
      "ABS00097.pdf":"O 102 - PENETRATION OF COAL TAR INTO GLAZE COATED COKE OVENDOOR BLOCKS",
      "ABS00098.pdf":"O 103 - PRECAST COKE OVEN DOOR: A FUTURISTIC PRODUCT",
      "ABS00099.pdf":"O 104 - COKE DEPOSITION IN THE REFRACTORY LINING OF FLUIDCATALYTIC CRACKING UNIT (FCCU) - A CASE STUDY",
      "ABS00100.pdf":"O 105 - SEEKING SUITABLE REFRACTORIES TO LIMIT THE WEAR INROTARY KILNS FOR INDUSTRIAL WASTE INCINERATION",
      "ABS00101.pdf":"O 106 - INFLUENCE OF APPLICATION METHOD AND SINTERINGTEMPERATURE ON POROSITY AND THERMAL CONDUCTIVITY OF TWOCOMMERCIAL SILICON CARBIDE BASED CASTABLES",
      "ABS00102.pdf":"O 107 - NEW CONCEPT OF REFRACTORY LININGS FOR ENTRAINED FLOWREACTORS: APPLICATION TO BIOMASS GASIFICATION",
      "ABS00103.pdf":"O 108 - EVALUATION OF NEW CHROMIA FREE REFRACTORIES BY FIELDTEST IN A SLAGGING GASIFIER",
      "ABS00104.pdf":"O 109 - CAUSES OF PHOSPHORUS MIGRATION IN HIGH CR2O3 GASIFIERREFRACTORIES AND THE IMPACT ON SLAG WEAR AND SPALLING",
      "ABS00105.pdf":"O 110 - CORRELATION OF PHOSPHATE AMOUNT IN BIOMASS SLAGS ANDTHE MICROSTRUCTURAL CHANGES DUE TO CORROSION OF ALUMINAAND ANDALUSITE REFRACTORIES",
      "ABS00106.pdf":"O 111 - PROPERTIES OF NATURAL AND SYNTHETIC ITACOLUMITICMICROSTRUCTURES - RULES FOR GENERATING GEOMIMETIC FLEXIBLEREFRACTORIES",
      "ABS00107.pdf":"O 112 - ALF3 MECHANISM AND ITS INFLUENCE ON THE CALCINEDALUMINA PROPERTIES",
      "ABS00108.pdf":"O 113 - INFLUENCE OF DIFFERENT RAW MATERIALS ON THE BEHAVIOUROF LOW CEMENT CASTABLES",
      "ABS00109.pdf":"O 114 - CHARACTERISTICS OF MICROPORED SINTERED ALUMINA AND ITSUSE AS AGGREGATES IN AL2O3-MGO CASTABLE",
      "ABS00110.pdf":"O 115 - EFFECT OF MGO ADDTION ON MULLITIZATION AND SINTERINGBEHAVIOR OF ANDALUSITE POWDER",
      "ABS00111.pdf":"O 116 - THE DISTRIBUTION CHARACTER OF GLASS PHASE IN THEBAUXITE-BASED HOMOGENIZED GROG",
      "ABS00112.pdf":"O 117 - ACOUSTIC EMISSION OF THE BENDING FRACTURE OF MGO-CBRICKS IN THE 3-POINT BENDING TEST",
      "ABS00113.pdf":"O 118 - RESONANT FREQUENCY YOUNG'S MODULUS DETERMINATION OFCYLINDRICAL SAMPLES WITH INCONGRUOUS GEOMETRY",
      "ABS00114.pdf":"O 119 - TENSILE AND COMPRESSIVE CREEP TESTING OF REFRACTORIESAT SERVICE RELATED LOADS",
      "ABS00115.pdf":"O 120 - SINTERING BEHAVIOUR OF REFRACTORY CASTABLES DETECTEDBY CHANGES OF THEIR THERMAL DIFFUSIVITY",
      "ABS00116.pdf":"O 121 - NONLINEAR TEMPERATURE PROFILING IN CALORIMETRICTHERMAL CONDUCTIVITY DETERMINATIONS",
      "ABS00117.pdf":"O 122 - HEAT CONDUCTIVITY MEASUREMENT OF REFRACTORIES -COMPARISON OF METHODS AND CRITICAL REVIEW OF APPLYINGRESULTS",
      "ABS00118.pdf":"O 123 - IN-SITU DETERMINATION OF SINTERING PROCESSES INREFRACTORY MATERIALS BY THE METHOD OF MONOTONIC HEATING(MMH)",
      "ABS00119.pdf":"O 124 - DETECTION OF MELT FORMATION IN A LCC SPIKED WITHSINTERING AIDS BY THE METHOD OF MONOTONIC HEATING (MMH)",
      "ABS00120.pdf":"O 125 - EFFECT OF SINTERING AIDS ON THE THERMO-MECHANICALPROPERTIES OF A LCC DETERMINED BY WEDGE SPLITTING TESTS ATCRITICAL TEMPERATURES IDENTIFIED BY THE METHOD OF MONOTONICHEATING (MMH)",
      "ABS00121.pdf":"O 126 - COUPLING BETWEEN HOMOGENIZATION TECHNIQUES ANDBRITTLE MECHANICS FOR MODELLING THE VISCOPLASTIC BEHAVIOUROF MICRO-CRACKED REFRACTORY LININGS",
      "ABS00122.pdf":"O 127 - THERMAL SHOCK BEHAVIOR OF CARBON-REDUCEDREFRACTORIES",
      "ABS00123.pdf":"O 128 - PRODUCTION PROCESS FOR NEW LIGHTWEIGHT KILN FURNITUREAND THEIR RELEVANCE FOR THE TEMPERATURE DISTRIBUTION WITHINTHE KILN",
      "ABS00124.pdf":"O 129 - IMPROVEMENT OF THERMAL SHOCK RESISTANCE OF LOWCARBON CARBON-CONTAINING REFRACTORIES",
      "ABS00125.pdf":"O 130 - FACTORS AFFECTING THE REPRODUCIBILITY AND REPETABILITYOF SPECIMEN PREPARATION OF MONOLITHIC REFRACTORIES IN THE ISO1927 AND RELATED STANDARDS",
      "ABS00126.pdf":"O 131 - DETERMINATION OF THE RHEOLOGICAL BEHAVIOR OFREFRACTORY CASTABLES BY USING THE BALL MEASUREMENT SYSTEM(BMS)",
      "ABS00127.pdf":"O 132 - THE FORMATION VELOCITY OF CA HYDRATE PHASES INREFRACTORY CASTABLES AFTER WATER ADDITION",
      "ABS00128.pdf":"O 133 - STRUCTURE EVOLUTION DURING DEHYDRATION PROCESS ANDITS EFFECT ON MECHANICAL PROPERTIES OF CAC-BONDED ALUMINACASTABLES",
      "ABS00129.pdf":"O 134 - EFFECT OF MICROWAVE CURING AND DRYING ON PROPERTIESOF ALUMINA LOW-CEMENT CASTABLES",
      "ABS00130.pdf":"O 135 - MOLAR VOLUME MODEL AND DATABASE FOR MOLTEN SLAGS",
      "ABS00131.pdf":"O 136 - EXPERIMENTAL STUDY TO DETERMINE THE REOXIDATIONSTABILITY OF REFRACTORY MATERIALS",
      "ABS00132.pdf":"O 137 - INFLUENCE OF SECONDARY PHASES ON CARBOTHERMICREDUCTION IN MAGNESIA-CARBON BRICKS",
      "ABS00133.pdf":"O 138 - EUROPEAN REFRACTORIES RECYCLING - CURRENT TRENDS ANDPROSPECTS",
      "ABS00134.pdf":"O 139 - RECYCLING OF SPENT REFRACTORIES",
      "ABS00135.pdf":"O 140 - CRITERIA FOR APPLICATION OF EXTERNAL RECYCLED SCRAPS INREFRACTORY PRODUCTS",
      "ABS00136.pdf":"O 141 - INNOVATIVE SEPARATION TECHNOLOGIES FOR REFRACTORYWASTE",
      "ABS00137.pdf":"O 142 - PROCESSING OF SPENT MGO-C REFRACTORIES: A COMPARATIVESTUDY BETWEEN CONVENTIONAL COMMINUTION AND ALTERNATIVEMETHODS FOR THE LIBERATION OF MAGNESIA AND CARBON",
      "ABS00138.pdf":"O 143 - RESTAR - COLLABORATIVE INITIATIVE IN THE EUROPEANREFRACTORY SECTOR TO REVIEW AND IMPROVE TESTING STANDARDS",
      "ABS00139.pdf":"O 144 - INVESTIGATION ON THE FACTORS INFLUENCING PERMANENTLINEAR CHANGE TESTING FOR DENSE REFRACTORY CASTABLES",
      "ABS00140.pdf":"O 145 - INVESTIGATION OF THE PARAMETERS INFLUENCING THEREFRACTORINESS UNDER LOAD (RUL) TESTING RESULTS FORREFRACTORY MATERIALS",
      "ABS00141.pdf":"O 146 - INVESTIGATION OF THE FACTORS INFLUENCING THE BULKDENSITY AND OPEN POROSITY TESTING RESULTS FOR REFRACTORYMATERIALS",
      "ABS00142.pdf":"O 147 - INVESTIGATION INTO FACTORS INFLUENCING THE COLDCRUSHING STRENGTH RESULTS OF DENSE SHAPED REFRACTORIES",
      "ABS00143.pdf":"O 148 - REAPPRAISAL OF CURRENT STANDARD TESTING METHODS FORTHE DETERMINATION OF THE MODULUS OF RUPTURE (MOR) OFREFRACTORY PRODUCTS",
      "ABS00144.pdf":"O 149 - IMPROVEMENT OF MGO-C BRICKS FOR TUYERE OF CONVERTERBOTTOM",
      "ABS00145.pdf":"O 150 - INFLUENCING THE THERMO MECHANICAL BEHAVIOUR OF MGO-CBRICKS; A SYSTEMATIC APPROACH",
      "ABS00146.pdf":"O 151 - CARBON BONDED MGO-C REFRACTORIES WITH LOW PAHCONTAINING BINDER SYSTEM",
      "ABS00147.pdf":"O 152 - HIGH TEMPERATURE BEHAVIOUR OF CARBON BONDEDMAGNESIA (MGO-C) AT TEMPERATURES UP TO 1500 ∞C",
      "ABS00148.pdf":"O 153 - BIO INSPIRED REFRACTORY DEVELOPMENT (B.I.R.D.): HIGHSTRENGTH AND TOUGH MGO-C BRICKS FOR BOF",
      "ABS00149.pdf":"O 154 - FIRING RESEARCH FOR REFRACTORIES IN STEEL LADLEAPPLICATIONS",
      "ABS00150.pdf":"O 155 - HIGHER EDUCATION IN THE FIELDS OF CERAMICS - POSSIBILITIESAND LIMITATIONS",
      "ABS00151.pdf":"O 157 - DEVELOPMENT OF IMPACT RESISTANT MGO-C BRICKS ATROURKELA STEEL PLANT",
      "ABS00152.pdf":"O 158 - EFFECT OF MICROSTRUCTURE ON SLAG CORROSIONRESISTANCE OF MAGNESIA CARBON BRICKS",
      "ABS00153.pdf":"O 159 - IMPROVEMENT IN THE PERFORMANCE OF MGO-CAO-CREFRACTORIES BY NOVEL HEAT TREATMENT PROCESS",
      "ABS00154.pdf":"O 160 - CONTROLLED FORMATION OF CERAMIC PHASES IN MGO-CREFRACTORIES WITH AL AND SI ADDITIVES",
      "ABS00155.pdf":"O 161 - EFFECTS OF DOPING RARE EARTH OXIDES ON PROPERTIES OFMGO-CAO REFRACTORIES",
      "ABS00156.pdf":"O 162 - MINERALS MATTER: REFRACTORY RAW MATERIAL SUPPLYTRENDS AND DEVELOPMENTS",
      "ABS00157.pdf":"O 163 - FIRED DOLOMITE REFRACTORIES BASED ON VARIOUS KINDS OFDOLOMA AND DOLOMA-MAGNESIA CLINKERS",
      "ABS00158.pdf":"O 164 - LASER-INDUCED BREAKDOWN SPECTROSCOPY AS A POWERFULTOOL FOR ON-LINE QUALITY CONTROL IN THE REFRACTORY INDUSTRY",
      "ABS00159.pdf":"O 165 - FUSED REFRACTORY RAW MATERIALS - CHALLENGING ASPECTSFOR THEIR PRODUCTION",
      "ABS00160.pdf":"O 166 - NATURAL GRAPHITE RAW MATERIAL TRENDS TO 2020",
      "ABS00161.pdf":"O 167 - EXPERIMENTAL STUDY OF THE COMPRESSION BEHAVIOUR OFREFRACTORY CASTABLES USING IN-SITU X-RAY MICROTOMOGRAPHY",
      "ABS00162.pdf":"O 168 - ADDITIVE MANUFACTURING AS A NOVEL APPROACH FORPRODUCING CERAMIC PARTS",
      "ABS00163.pdf":"O 169 - THE INFLUENCE OF DIFFERENT PYROLYSIS TEMPERATURES ONTHE HIGH TEMPERATURE YOUNG'S MODULUS OF AL2O3-C",
      "ABS00164.pdf":"O 170 - POTASSIUM ALUMINATES AS REFRACTORY MATERIALS",
      "ABS00165.pdf":"O 171 - PRODUCTION PROCESS FOR NEW LIGHTWEIGHT KILN FURNITUREAND THEIR RELEVANCE FOR THE TEMPERATURE DISTRIBUTION WITHINTHE KILN",
      "ABS00166.pdf":"O 172 - THE EFFECT OF STOICHIOMETRY ON THE MGAL2O3 SPINELEXPANSION",
      "ABS00167.pdf":"O 173 - CHARACTERISTICS OF ALUMINA-SPINEL CASTABLE USING NEWBIPHASE ALUMINA BASED AGGREGATES",
      "ABS00168.pdf":"O 174 - A NEW FIRING TECHNOLOGY FOR RAW MATERIALS CONTAININGHIGH ENERGETIC ADDITIVES",
      "ABS00169.pdf":"O 175 - THERMAL, CHEMICAL AND MECHANICAL EVALUATION OF AL2O3-MGO-C BRICKS UNDER OXIDANT CONDITIONS",
      "ABS00170.pdf":"O 176 - EFFECT OF PYROPHYLLITE ON DURABILITY OF AL2O3-SIC-CBRICKS",
      "ABS00171.pdf":"O 177 - EFFECTS OF DIFFERENT ADDITIVES ON THE SETTING BEHAVIORAND GREEN STRENGTH OF COLLOIDAL SILICA BONDED AL2O3-SIC-CCASTABLES",
      "ABS00172.pdf":"O 178 - MECHANICAL CHARACTERISATION OF CARBON BONDED ALUMINA(AL2O3-C) AT TEMPERATURES UP TO 1500 ∞C",
      "ABS00173.pdf":"O 179 - IMPROVEMENT OF THE OXIDATION RESISTANCE BY MGOADDITION TO AL2O3-SIC-C BRICKS",
      "ABS00174.pdf":"O 180 - AL2O3-C REFRACTORIES WITH INCREASED THERMAL SHOCKRESISTANCE BY THE ADDITION OF FIBRES AND NANOPARTICLES",
      "ABS00175.pdf":"O 181 - PREPARATION OF SIC-ZRSIO4 POROUS COMPOSITES AND ITSHIGH TEMPERATURE OXIDATION BEHAVIOR",
      "ABS00176.pdf":"O 182 - REVISION OF THERMODYNAMIC DATABASE FOR UNARY, BINARYAND TERNARY ZRO2 CONTAINING SYSTEMS",
      "ABS00177.pdf":"O 183 - INFLUENCE OF ANTIOXIDANT ON ABRASION RESISTANCE OF SICCONTAINING CASTABLES",
      "ABS00178.pdf":"O 184 - INVESTIGATION OF INTERFACIAL REACTION OF FE-C ALLOYS ONSPINEL SUBSTRATES AND SILICON CARBIDE SUBSTRATES",
      "ABS00179.pdf":"O 185 - MICROSTRUCTURE AND PROPERTIES OF ALUMINA-CARBONCASTABLES USING CARBIDE COATED CARBON",
      "ABS00180.pdf":"P001 - EQUILIBRIUM PHASE RELATIONS IN THE AL2O3-CAO-CR2O3SYSTEM IN AIR",
      "ABS00181.pdf":"P002 - CATION DISTRIBUTION AND PHASE STABILITY OFPSUEDOBROOKITE-TYPE OXIDES",
      "ABS00182.pdf":"P003 - SYNTHESIS OF MAGNESIUM ALUMINATE SPINEL AGGREGATESFROM NATURAL AND SYNTHETIC RAW MATERIALS",
      "ABS00183.pdf":"P004 - PROPERTIES EVALUATION AND MICROSTRUCTURE ANALYSIS OFMATERIALS WITH RECYCLING REFRACTORY AGGREGATES",
      "ABS00184.pdf":"P006 - DEVELIOPMENT OF ALUMINA-MAGNESIA CASTABLE WHICHCONTAINS RECYCLED MAGNESIA-CARBON BRICKS AND ALUMINAMAGNESIACASTABLE",
      "ABS00185.pdf":"P007 - MONITORING TOOLS DEDICATED TO THE DRYING OF CASTABLESCOUPLED TO A NUMERICAL MODEL: A POWERFUL METHOD FOR A SAFEAND FAST DRYING OF REFRACTORY CONCRETE LININGS",
      "ABS00186.pdf":"P008 - THERMO-OPTICAL MEASURING METHODS FOR HIGHTEMPERATURE CHARACTERIZATION OF REFRACTORIES",
      "ABS00187.pdf":"P010 - DETERMINATION OF FRACTURE ENERGY OF REFRACTORYMATERIALS BY WEDGE SPLITTING TEST",
      "ABS00188.pdf":"P012 - MODULUS OF RUPTURE OF REFRACTORY CASTABLES:OPTIMIZATION OF TEST PARAMETERS",
      "ABS00189.pdf":"P013 - NUMERICAL TREATMENT OF THE INELASTIC BEHAVIOUR OFREFRACTORY MATERIALS",
      "ABS00190.pdf":"P014 - THE INFLUENCE OF HEATING RATE ON TORSION STRENGTH OFREFRACTORIES AT ELEVATED TEMPERATURES",
      "ABS00191.pdf":"P016 - CHARACTERIZATION OF THE COMPRESSIVE CREEP BEHAVIOR OFCLAY REFRACTORY MATERIALS - DEVELOPMENT OF A ìTIME LAWî",
      "ABS00192.pdf":"P017 - ASSESSMENT OF THERMAL SHOCK RESISTANCE BY HMOR TESTWITH HIGH HEATING RATE",
      "ABS00193.pdf":"P018 - A COMPARATIVE EVALUATION STUDY OF METHODS FOR THERMALSHOCK ASSESSMENT",
      "ABS00194.pdf":"P019 - INVESTIGATION OF THERMAL SHOCK BEHAVIOUR OFREFRACTORY CERAMICS BASED ON THE CALCIUM-ALUMINATE",
      "ABS00195.pdf":"P020 - INFLUENCE OF MICROSTRUCTURE ON FRACTURE BEHAVIOR OFMAGNESIA-SPINEL REFRACTORY BRICKS",
      "ABS00196.pdf":"P021 - AN EASY-TO-USE METHOD TO CARRY OUT QUANTITATIVEANALYSIS OF MULLITE",
      "ABS00197.pdf":"P022 - SIMULTANEOUS PHASE AND CHEMISTRY ANALYSIS IN YSZ BYRAMAN SPECTROSCOPY",
      "ABS00198.pdf":"P024 - CORROSION KINETICS OF HIGH ALUMINA REFRACTORIES BY LIMEALUMINA-SILICA SLAG",
      "ABS00199.pdf":"P026 - EFFECTS OF ADDITION OF SIC WITH DIFFERENT PARTICLE SIZEON PROPERTIES OF SILICA BRICK",
      "ABS00200.pdf":"P027 - TAILORING THE MORPHOLOGIES OF CALCIUM HEXALUMINATE INTHE PRESENCE OF DIFFERENT TYPES OF AL2O3 SOURCE",
      "ABS00201.pdf":"P028 - THE EFFECTS OF DIFFERENT TYPE OF BONDS ON BAUXITEREFRACTORIES",
      "ABS00202.pdf":"P030 - EFFECT OF HOMOGENIZED BAUXITE AGGREGATE ON PROPERTIESOF AL2O3-SIC-C CASTABLE",
      "ABS00203.pdf":"P031 - EFFECT OF FE2O3 AND/OR MNO2 ADDITIVES ON MICROWAVEHEATING OF AL2O3-SIO2 COMPOSITE",
      "ABS00204.pdf":"P032 - THE EFFECT OF PENTAVALENT OXIDES ADDITIVES ON THEPHYSICAL AND MECHANICAL PROPERTIES OF · ALUMINA CERAMICS",
      "ABS00205.pdf":"P033 - DEVELOPMENT OF AL2O3-CR2O3 REFRACTORIES BY REACTIONSINTERING OF HYDRATED ALUMINA AND CHROMIC OXIDE",
      "ABS00206.pdf":"P034 - EFFECT OF NANO- TIO2 ADDITION ON SINTERINGCHARACTERISTIC OF CORUNDUM BRICK",
      "ABS00207.pdf":"P036 - PHASE EVOLUTION OF HIGH-ALUMINA PHOSPHATE-BONDEDREFRACTORY CASTABLES",
      "ABS00208.pdf":"P037 - INFLUENCE RESEARCH OF FERROSILICON ADDITION AMOUNT ONSIALON SYNTHESIS AND PROPERTIES OF SIALON BOND CORUNDUMREFRACTORIES",
      "ABS00209.pdf":"P038 - EFFECT OF IN-SITU FORMATION OF AL5O6N ON THE MECHANICALPROPERTIES OF AL2O3-C REFRACTORIES",
      "ABS00210.pdf":"P039 - SPECIALLY TREATED GRAPHITE FORTIFIED ALUMINA-SILICONCARBIDE-CARBON REFRACTORIES",
      "ABS00211.pdf":"P040 - PROPERTIES OF AL2O3-C REFRACTORIES BONDED WITHORGANIC/INORGANIC COMPOSITE PHENOLIC RESIN",
      "ABS00212.pdf":"P041 - INFLUENCE OF NANOPARTICLES AND SEMICONDUCTOR ON THEMECHANICAL AND THERMO-MECHANICAL PROPERTIES OF CARBONBONDED ALUMINA REFRACTORIES",
      "ABS00213.pdf":"P042 - EFFECT OF ADDITIVES ON THE SINTERING PERFORMANCE OFTITANIUM CALCIUM ALUMINATE-CALCIUM ALUMINATE-CALCIUM TITANATEMULTIPHASE MATERIALS",
      "ABS00214.pdf":"P043 - PREPARATION OF MICRO-SIZED ·-AL2O3 PLATELETS FROM MILLEDAL(OH)3 PRECURSOR WITH NH4F AND NH4CL ADDITIVES",
      "ABS00215.pdf":"P044 - EFFECT OF DIFFERENT ALUMINA ON THE PERFORMANCE OFTABULAR ALUMINA",
      "ABS00216.pdf":"P045 - MOLTEN SALT SYNTHESIS OF MGAL2O4 SPINEL IN ALKALICHLORIDES-KF SYSTEM",
      "ABS00217.pdf":"P046 - THE EFFECTS OF IRANIAN NANO DOLOMITE IN THE FORMATION OFSPINEL- HIGH ALUMINA CEMENTS REFRACTORIES",
      "ABS00218.pdf":"P047 - EFFECT OF RARE EARTH OXIDES ADDITION ON THE SINTERINGPROPERTIES OF MAGNESIA",
      "ABS00219.pdf":"P051 - FORMATION OF NANOSTRUCTURED CARBONS IN MGO-C BODIES",
      "ABS00220.pdf":"P052 - INFLUENCE OF HERCYNITE CONTENT ON THERMO-MECHANICALAND CORROSION BEHAVIOUR OF SPINEL BONDED MAGNESIAREFRACTORIES",
      "ABS00221.pdf":"P053 - PHASE EVOLUTION, MICROSTRUCTURE AND THERMOMECHANICALCHARACTERISTICS OF TITANIA BEARING SPINELPERICLASEREFRACTORIES FOR RH DEGASSER",
      "ABS00222.pdf":"P054 - INFLUENCE OF ZINC ADDITION ON IN-SITU REACTION OF METALCOMPOSITE MGO-C REFRACTORIES",
      "ABS00223.pdf":"P055 - THE MECHANICAL PROPERTIES AND SLAG RESISTANCE OF MGOCAOBRICKS USING ONE-STEP CALCINED DOLOMA CLINKER AS RAWMATERIAL",
      "ABS00224.pdf":"P056 - INVESTIGATION ON THERMOLITH OLIVINE",
      "ABS00225.pdf":"P057 - STUDIES ON DEVELOPMENT OF MAGNESIA REFRACTORYAGGREGATES FROM INDIAN MAGNESITE USING FE2O3 AS AN ADDITIVE",
      "ABS00226.pdf":"P058 - ASSESSMENT OF SUITABILITY OF DOLOMITES FROM ìNEWDEPOSITî OF SILESIA REGION FOR PRODUCTION OF REFRACTORYMATERIALS",
      "ABS00227.pdf":"P059 - ROLE AND POSITION OF IRON IN MAGNESIA AGGREGATS",
      "ABS00228.pdf":"P060 - EXPLORING THE MIXING PROPERTIES OF CERAMIC MATERIALS",
      "ABS00229.pdf":"P061 - SLIP CASTING AND REORHOLOGY CONTROL OF SIALON CERAMICS",
      "ABS00230.pdf":"P063 - NITRIDATION ENHANCING EFFECT OF FE, CO AND NINANOPARTICLES ON SILICON POWDERS",
      "ABS00231.pdf":"P064 - A NOVEL METHOD FOR SYNTHESIS OF PARTIALLY STABILIZEDNANO ZIRCONIA",
      "ABS00232.pdf":"P065 - STUDY ON THE PREPARATION AND PROPERTIES OF ALUMINAHEAT INSULATION MATERIAL WITH HIGH PURITY",
      "ABS00233.pdf":"P066 - THE ROLE OF LA2O3 ON THE PERFORMANCES OF CAO-MGO-SIO2CERAMIC FIBER",
      "ABS00234.pdf":"P067 - THERMAL CHANGES OF CORUNDUM-BASED AND MULLITE-BASEDWOOL HEATED IN HYDROGEN ATMOSPHERE",
      "ABS00235.pdf":"P068 - DENSIFICATION AND CHARACTERIZATION OF MULLITE-BASEDCOMPOSITES",
      "ABS00236.pdf":"P069 - WAYS TO OVERCOME THE PREHEATING EXPLOSION OF ALUMINASPINEL-FORMING CASTABLE",
      "ABS00237.pdf":"P070 - EFFECT OF SODIUM TRIPOLYPHOSPHATE ON HYDRATIONBEHAVIOR OF DIFFERENT CALCIUM ALUMINATE CEMENTS",
      "ABS00238.pdf":"P071 - EFFECT OF SULFUR ON THE PROPERTIES OF CALCIUM ALUMINATECEMENT IN A CONVENTIONAL REFRACTORY CONCRETE",
      "ABS00239.pdf":"P072 - STUDY ON MECHANISM OF EXPLOSIVE SPALLING OF ULCCASTABLES DURING RAPID DRYING",
      "ABS00240.pdf":"P073 - THE EFFECT OF DIFFERENT BINDING AGENTS ON THE MATRIXPHASE DEVELOPMENT AND HIGH TEMPERATURE SAGGING OF A 80WT%AL2O3 REFRACTORY CASTABLE",
      "ABS00241.pdf":"P074 - INFLUENCE OF ANTIFREEZING AGENT ADDITION ON ALUMINATECEMENT BONDED REFRACTORY CASTABLE USED AT NEGATIVETEMPERATURE",
      "ABS00242.pdf":"P075 - THERMAL EXPANSION AND PHASE CHANGES IN HIGH ALUMINAULTRA-LOW CEMENT CASTABLE REFRACTORIES",
      "ABS00243.pdf":"P077 - THE DISSOLUTION BEHAVIOR OF AL2O3 IN LOW-MELTING PHASECONTAINING TIO2 FOR ALUMINA-MAGNESIA CEMENT-BONDEDCASTABLES",
      "ABS00244.pdf":"P078 - INVESTIGATION ON HOT STRENGTH DECLINE OF IN-SITUNONOXIDE COMPOSITED ALUMINA BASED CASTABLES BY HOT STRESSSTRAINAPPROACH",
      "ABS00245.pdf":"P080 - STUDY ON BASIC CERAMIC BINDER",
      "ABS00246.pdf":"P084 - THE INFLUENCE OF ALUMINA POWDER ON THE HYDRATIONBEHAVIOR OF DIFFERENT CALCIUM ALUMINATE CEMENTS",
      "ABS00247.pdf":"P085 - EFFECT OF CITRIC ACID ON HYDRATION BEHAVIOR OF DIFFERENTCALCIUM ALUMINATE CEMENTS",
      "ABS00248.pdf":"P086 - DESIGNING OF MATRIX AND ITS INFLUENCE ON DIFFERENTPROPERTIES IN LOW CEMENT CASTABLES",
      "ABS00249.pdf":"P087 - HIGH TEMPERATURE CHARACTERISTICS OF POTASIUMGEOPOLYMERS",
      "ABS00250.pdf":"P089 - IMPACT OF DRY GUNNING ON THE DRYING PROPERTIES OFREFRACTORY MONOLITHS",
      "ABS00251.pdf":"P090 - LOWERING OF THE REFRACTORY CORROSION IN HIGHTEMPERATURE PROCESSES",
      "ABS00252.pdf":"P091 - ADVANCES ON CERAMIC FILTERS FABRICATION PROCESS",
      "ABS00253.pdf":"P092 - NITROGEN-FREE MONOMERS FOR FOAM CERAMIC PRODUCTSMADE BY THE GELCASTING METHOD",
      "ABS00254.pdf":"P094 - EFFECT OF PARTICLE SIZE CHANGE ON HYDRATION BEHAVIOR OFDIFFERENT CALCIUM ALUMINATE CEMENTS",
      "ABS00255.pdf":"P097 - INFLUENCE OF CACL2 ADDITION ON THE HYDRATION BEHAVIOROF CALCIUM MAGNESIUM ALUMINATE CEMENT AT ROOMTEMPERATURES",
      "ABS00256.pdf":"P098 - ALTERNATIVE ADVANCED ALUMINAS FOR REFRACTORYCASTABLES (PART 2)",
      "ABS00257.pdf":"P099 - OXIDATION RESISTANCE TO HIGH TEMPERATURE VAPOR OFNITRIDE BONDED SILICON CARBIDE REFRACTORIES FOR CALCINER",
      "ABS00258.pdf":"P100 - DEVELOPMENT OF LOW THERMAL EXPANSION SILICA BRICKS FORHOT REPAIR OF COKE OVENS",
      "ABS00259.pdf":"P101 - CFD SIMULATION OF A SINTER-FURNACE INCLUDING CONVECTIVEAND RADIATIVE HEAT TRANSPORT",
      "ABS00260.pdf":"P102 - INFLUENCES OF CRUDE BIOGAS ON REFRACTORY MATERIALS INTHE GLASS MELTING PROCESS",
      "ABS00261.pdf":"P103 - NEW MATERIALS AND IMPROVEMENTS FOR THE GLASS INDUSTRYPART2",
      "ABS00262.pdf":"P104 - MODIFIED RADIATIVE HEAT TRANSFER IN COMBINATION WITH AHIGHER SERVICE LIFE OF THE SILICA CROWN IN GLASS FURNACES",
      "ABS00263.pdf":"P105 - THE STUDIES ON THE REFRACTORY LINING OF THE CS2PRODUCING FURNACE",
      "ABS00264.pdf":"P106 - PROPERTIES OF CA900 CEMENT BONDED MULLITE CASTABLE FORROTARY KILN LINING",
      "ABS00265.pdf":"P108 - INFLUENCE OF TIO2 AND ZRO2 COMPOSITE ADDITIVE ON THESTRUCTURE AND PROPERTIES OF MGO-MGAL2O4 REFRACTORIES",
      "ABS00266.pdf":"P109 - DEVELOPMENT OF MGO-CAO-ZRO2 BASED REFRACTORIES(CHROME FREE) WITH ADDITION OF SPINEL",
      "ABS00267.pdf":"P111 - PERFORMANCE OF REFRACTORY IN EXTREME SERVICECONDITIONS IN REFINERY AND PETROCHEMICAL INDUSTRIES",
      "ABS00268.pdf":"P112 - ON THE WEAR OF A BLAST FURNACE WALL AND THE DETECTIONTHEREOF, A FINITE ELEMENT NODAL WEAR APPROACH",
      "ABS00269.pdf":"P114 - DEVELOPMENT OF TAPHOLE CLAY USING GLYCOL-BASEDADDITIVE FOR IMPROVEMENT OF PLUGGING PROPERTIES",
      "ABS00270.pdf":"P116 - COLLOIDAL SILICA BONDED CASTABLES FOR HIGH ENDREFRACTORY APPLICATIONS",
      "ABS00271.pdf":"P117 - MAGNESIA CARBON REPLACEMENT OF DOLOMITE IN LADLELININGS BY PROCESS AND LADLE SLAG PROCESS MANIPULATION IN ANALUMINIUM KILLED EAF MELT SHOP",
      "ABS00272.pdf":"P118 - A COMPARATIVE STUDY ON SLAG RESISTANCE PROPERTIES OFRH REFINING FURNACE REFRACTORIES",
      "ABS00273.pdf":"P120 - LAB EVALUATION OF LADLE LINING GRANULAR MATERIALS UNDERIN SERVICE CONDITIONS",
      "ABS00274.pdf":"P121 - NEW DEVELOPMENTS FOR STEEL LADLE BOTTOM IMPACT PAD",
      "ABS00275.pdf":"P123 - RELATION BETWEEN STRUCTURE, MICROSTRUCTURE ANDCORROSION RESISTANCE TO SLAG OF REFRACTORIES IN TEEMINGLADLES - ROLE OF PERMEABILITY",
      "ABS00276.pdf":"P124 - NO-CEMENT ALUMINA-MAGNESIA CASTABLES FOR STEEL LADLE",
      "ABS00277.pdf":"P125 - EFFECTS OF AL2O3 CONTENT ON THE PROPERTIES OF MAGNESIAMAGNESIUMALUMINATE SPINEL MATERIALS USED IN RH SNORKEL",
      "ABS00278.pdf":"P126 - IMPROVEMENT AND APPLICATION OF AL2O3-MGO GUNNING MIX INREFINING LADLES",
      "ABS00279.pdf":"P127 - THE NEW INNOVATION ON LIFE-TIME OF MSCO STEELMAKINGLADLES BY USING IMPROVED SMART AMC REFRACTORIES",
      "ABS00280.pdf":"P128 - DESIGN OF MAGNESIA-CARBON LADLE PRODUCTS IN ORDER TOMAXIMISE PERFORMANCE WHEN PRODUCING A RANGE OF STEELQUALITIES",
      "ABS00281.pdf":"P129 - IMPROVEMENT OF THE CORROSION RESISTANCE FOR SPINELGRAPHITE MATERIALS",
      "ABS00282.pdf":"P130 - A NOVEL DESIGN OF SUB ENTRY NOZZLE TO OPTIMIZE MOULDTURBULENCE FOR PRODUCING CLEANER STEEL & TO WITHSTANDLONGER SEQUENCE CASTING",
      "ABS00283.pdf":"P131 - THE INFLUENCE OF SUBMERGED ENTRY NOZZLE AND TUNDISHNOZZLE DESIGN ON THE FLOW CHARACTER FOR THE SLAB QUALITY",
      "ABS00284.pdf":"P132 - HIGH PERFORMANCE REFRACTORY DEVELOPMENTS FORCONTINUOUS CASTING OF QUALITY STEELS",
      "ABS00285.pdf":"P133 - ELECTRON BACKSCATTER DIFFRACCION APPLICATION ON STEELCONTINUOUS CASTING NOZZLES TO INCREASE THE KNOWLEDGE OFWEAR MECHANISMS",
      "ABS00286.pdf":"P134 - OPTIMISATION OF PROCESS PARAMETERS IN SYNTHESIS OFSINTERED MAGNESIA DOPED ZIRCONIA NOZZLES",
      "ABS00287.pdf":"P135 - HIGH-TEMPERATURE CORROSION OF ZIRCONIA REFRACTORIESBY LIQUID STEEL AND SLAG",
      "ABS00288.pdf":"P136 - REFRACTORY CASTABLES FOR MAIN RUNNERS - DEVELOPMENTSFOR NEW CHALLENGES IN BLAST FURNACE CASTHOUSE OPERATION",
      "ABS00289.pdf":"P137 - THE OPTIMAL BASIC INSULATING SPRAYING REFRACTORY DESIGNFOR TUNDISHWITH THE PREDICTABLE FIELD RESULT",
      "ABS00290.pdf":"P138 - POST MORTEM STUDY OF UNFIRED AL-ZN INCORPORATED AL2O3-C SLIDE PLATES",
      "ABS00291.pdf":"P140 - DESIGN OF CHEMISTRY OF HOLLOWWARE REFRACTORIES FORINGOT CASTING APPLICATIONS",
      "ABS00292.pdf":"P141 - CHEMICAL INTERACTION BETWEEN MAGNESIA-CHROMITEREFRACTORY BRICKS AND PRIMARY PGM MATTE",
      "ABS00293.pdf":"P142 - INVESTIGATION OF CORROSION OF N-SIC MATERIAL BY THE MELTOF COPPER AND THE COPPER SLAG",
      "ABS00294.pdf":"P143 - EFFECT OF TIO2 ADDITION TO A CHROME-MAGNESIA BRICK ON ITSPHYSICAL, MECHANICAL AND THERMO-MECHANICAL PROPERTIES, ASWELL AS ITS MATTE PENETRATION AND SLAG CORROSION RESISTANCE",
      "ABS00295.pdf":"P144 - RHI'S INTERACTION WITHIN ITS NONFERROUS MAGNESIACHROMITE-BASED REFRACTORY ENVIRONMENT",
      "ABS00296.pdf":"P145 - NOVEL MULTILAYER REFRACTORIES DERIVED OF CAST CERAMICGREEN TAPES AND PRECERAMIC PAPERS",
      "ABS00297.pdf":"P146 - MANUFACTURE AND CHARACTERISATION OF NOVELREFRACTORIES BASED ON MULTI-LAYERED CERAMICS FOR STEELCASTING APPLICATIONS",
      "ABS00298.pdf":"P147 - ADVANCED PRECERAMIC PAPER DERIVED MULTILAYERREFRACTORIES WITH INTEGRATED LACRO3 BASED SENSORS FOR ONLINESTRUCTURE HEALTH MONOTORING",
      "ABS00299.pdf":"P148 - TESTING OF MGO-C BRICKS FOR BOF: FROM LABORATORY TOINDUSTRIAL TESTS",
      "ABS00300.pdf":"P149 - IMPROVED CASTABLE FOR STEEL LADLE BOTTOMS",
      "ABS00301.pdf":"P150 - INVESTIGATION OF THE EFFECT OF TIO2 ADDITION ONCORROSION BEHAVIOUR OF MGO-SPINEL COMPOSITE REFRACTORIES"
   ]
]