Skip to content

Instantly share code, notes, and snippets.

@ukBaz

ukBaz/db410c dmesg Secret

Created August 30, 2018 20:37
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save ukBaz/11eb0fd5ea2ddf84a926ee1a03ab4db2 to your computer and use it in GitHub Desktop.
Save ukBaz/11eb0fd5ea2ddf84a926ee1a03ab4db2 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
db410c dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.0-qcomlt-arm64 (abuild@r2-a19) (gcc version 7.2.0 (Debian 7.2.0-19)) #1 SMP PREEMPT Fri Feb 2 21:19:01 UTC 2018
[ 0.000000] Boot CPU: AArch64 Processor [410fd030]
[ 0.000000] Machine model: Qualcomm Technologies, Inc. APQ 8016 SBC
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 16 MiB at 0x00000000bec00000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000bfffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0xbfe96580-0xbfe9807f]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x0000000085ffffff]
[ 0.000000] node 0: [mem 0x0000000089f00000-0x000000008e9fffff]
[ 0.000000] node 0: [mem 0x000000008eb00000-0x00000000bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] On node 0 totalpages: 245760
[ 0.000000] DMA zone: 3840 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 245760 pages, LIFO batch:31
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] random: fast init done
[ 0.000000] percpu: Embedded 23 pages/cpu @ffff80003fe35000 s55704 r8192 d30312 u94208
[ 0.000000] pcpu-alloc: s55704 r8192 d30312 u94208 alloc=23*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM errata 826319, 827319, 824069
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 241920
[ 0.000000] Policy zone: DMA
[ 0.000000] Kernel command line: root=/dev/disk/by-partlabel/rootfs rw rootwait console=tty0 console=ttyMSM0,115200n8 androidboot.emmc=true androidboot.serialno=c4532528 androidboot.baseband=apq mdss_mdp.panel=0:dsi:0:
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 925932K/983040K available (10492K kernel code, 1548K rwdata, 4808K rodata, 1152K init, 422K bss, 40724K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
[ 0.000000] .text : 0xffff000008080000 - 0xffff000008ac0000 ( 10496 KB)
[ 0.000000] .rodata : 0xffff000008ac0000 - 0xffff000008f80000 ( 4864 KB)
[ 0.000000] .init : 0xffff000008f80000 - 0xffff0000090a0000 ( 1152 KB)
[ 0.000000] .data : 0xffff0000090a0000 - 0xffff000009223200 ( 1549 KB)
[ 0.000000] .bss : 0xffff000009223200 - 0xffff00000928cc68 ( 423 KB)
[ 0.000000] fixed : 0xffff7dfffe7fb000 - 0xffff7dfffec00000 ( 4116 KB)
[ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
[ 0.000000] 0xffff7e0000000000 - 0xffff7e0001000000 ( 16 MB actual)
[ 0.000000] memory : 0xffff800000000000 - 0xffff800040000000 ( 1024 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000745] Console: colour dummy device 80x25
[ 0.001431] console [tty0] enabled
[ 0.001498] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[ 0.001529] pid_max: default: 32768 minimum: 301
[ 0.001627] Security Framework initialized
[ 0.002185] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.002476] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.002518] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.002547] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.019264] ASID allocator initialised with 65536 entries
[ 0.027253] Hierarchical SRCU implementation.
[ 0.040072] EFI services will not be available.
[ 0.047998] smp: Bringing up secondary CPUs ...
[ 0.076283] Detected VIPT I-cache on CPU1
[ 0.076332] CPU1: Booted secondary processor [410fd030]
[ 0.104334] Detected VIPT I-cache on CPU2
[ 0.104375] CPU2: Booted secondary processor [410fd030]
[ 0.132396] Detected VIPT I-cache on CPU3
[ 0.132431] CPU3: Booted secondary processor [410fd030]
[ 0.132511] smp: Brought up 1 node, 4 CPUs
[ 0.132589] SMP: Total of 4 processors activated.
[ 0.132605] CPU features: detected feature: 32-bit EL0 Support
[ 0.132840] CPU: All CPU(s) started at EL1
[ 0.132868] alternatives: patching kernel code
[ 0.133603] devtmpfs: initialized
[ 0.145335] Registered cp15_barrier emulation handler
[ 0.145367] Registered setend emulation handler
[ 0.145627] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.145698] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 0.146442] pinctrl core: initialized pinctrl subsystem
[ 0.148734] DMI not present or invalid.
[ 0.149126] NET: Registered protocol family 16
[ 0.151878] cpuidle: using governor menu
[ 0.153682] vdso: 2 pages (1 code @ ffff000008ac6000, 1 data @ ffff0000090a5000)
[ 0.153718] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.154972] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.155460] Serial: AMBA PL011 UART driver
[ 0.187759] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.188874] ACPI: Interpreter disabled.
[ 0.190895] vgaarb: loaded
[ 0.191197] SCSI subsystem initialized
[ 0.191402] libata version 3.00 loaded.
[ 0.191654] usbcore: registered new interface driver usbfs
[ 0.191724] usbcore: registered new interface driver hub
[ 0.191820] usbcore: registered new device driver usb
[ 0.193974] pps_core: LinuxPPS API ver. 1 registered
[ 0.193997] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.194047] PTP clock support registered
[ 0.194252] EDAC MC: Ver: 3.0.0
[ 0.194570] dmi: Firmware registration failed.
[ 0.196612] Advanced Linux Sound Architecture Driver Initialized.
[ 0.197664] clocksource: Switched to clocksource arch_sys_counter
[ 0.197845] VFS: Disk quotas dquot_6.6.0
[ 0.197915] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.198089] pnp: PnP ACPI: disabled
[ 0.206073] NET: Registered protocol family 2
[ 0.206623] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.206748] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.206916] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.207057] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.207109] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.207281] NET: Registered protocol family 1
[ 0.207660] RPC: Registered named UNIX socket transport module.
[ 0.207679] RPC: Registered udp transport module.
[ 0.207693] RPC: Registered tcp transport module.
[ 0.207706] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.207726] PCI: CLS 0 bytes, default 128
[ 0.207881] Unpacking initramfs...
[ 0.447888] Freeing initrd memory: 3908K
[ 0.448745] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.449104] kvm [1]: HYP mode not available
[ 0.450550] audit: initializing netlink subsys (disabled)
[ 0.450672] audit: type=2000 audit(0.447:1): state=initialized audit_enabled=0 res=1
[ 0.451042] workingset: timestamp_bits=44 max_order=18 bucket_order=0
[ 0.458588] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.459315] NFS: Registering the id_resolver key type
[ 0.459354] Key type id_resolver registered
[ 0.459368] Key type id_legacy registered
[ 0.459389] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.459578] 9p: Installing v9fs 9p2000 file system support
[ 0.462458] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.462597] io scheduler noop registered
[ 0.462853] io scheduler cfq registered (default)
[ 0.462872] io scheduler mq-deadline registered
[ 0.462886] io scheduler kyber registered
[ 0.486302] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.488914] SuperH (H)SCI(F) driver initialized
[ 0.489700] msm_serial 78af000.serial: msm_serial: detected port #1
[ 0.489817] msm_serial 78af000.serial: uartclk = 19200000
[ 0.489896] 78af000.serial: ttyMSM1 at MMIO 0x78af000 (irq = 9, base_baud = 1200000) is a MSM
[ 0.490474] msm_serial 78b0000.serial: msm_serial: detected port #0
[ 0.490560] msm_serial 78b0000.serial: uartclk = 7372800
[ 0.490624] 78b0000.serial: ttyMSM0 at MMIO 0x78b0000 (irq = 10, base_baud = 460800) is a MSM
[ 0.490658] msm_serial: console setup on port #0
[ 1.329825] console [ttyMSM0] enabled
[ 1.335035] msm_serial: driver initialized
[ 1.339291] qcom-iommu 1ef0000.iommu: iommu sec: pgtable size: 94208
[ 1.354773] loop: module loaded
[ 1.359344] spi_qup 78b7000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 1.360641] spi_qup 78b9000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 1.366982] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
[ 1.381083] s1: supplied by regulator-dummy
[ 1.381449] s2: supplied by regulator-dummy
[ 1.384393] s3: supplied by regulator-dummy
[ 1.388464] s4: supplied by regulator-dummy
[ 1.392616] l1: supplied by regulator-dummy
[ 1.396842] l2: supplied by regulator-dummy
[ 1.400958] l3: supplied by regulator-dummy
[ 1.405120] l4: supplied by regulator-dummy
[ 1.409306] l5: supplied by regulator-dummy
[ 1.413453] l6: supplied by regulator-dummy
[ 1.417632] l7: supplied by regulator-dummy
[ 1.421816] l8: supplied by regulator-dummy
[ 1.425950] l9: supplied by regulator-dummy
[ 1.430125] l10: supplied by regulator-dummy
[ 1.434314] l11: supplied by regulator-dummy
[ 1.438807] l12: supplied by regulator-dummy
[ 1.443046] l13: supplied by regulator-dummy
[ 1.447333] l14: supplied by regulator-dummy
[ 1.451571] l15: supplied by regulator-dummy
[ 1.455826] l16: supplied by regulator-dummy
[ 1.460090] l17: supplied by regulator-dummy
[ 1.464322] l18: supplied by regulator-dummy
[ 1.469609] libphy: Fixed MDIO Bus: probed
[ 1.473231] tun: Universal TUN/TAP device driver, 1.6
[ 1.478273] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.481644] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.487445] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 1.493209] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.500189] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 1.505712] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.514234] sky2: driver version 1.30
[ 1.520003] usbcore: registered new interface driver rtl8150
[ 1.523288] usbcore: registered new interface driver r8152
[ 1.529013] usbcore: registered new interface driver asix
[ 1.534301] usbcore: registered new interface driver ax88179_178a
[ 1.539914] VFIO - User Level meta-driver version: 0.3
[ 1.547765] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.550873] ehci-pci: EHCI PCI platform driver
[ 1.557395] ehci-platform: EHCI generic platform driver
[ 1.562004] ehci-orion: EHCI orion driver
[ 1.567067] ehci-exynos: EHCI EXYNOS driver
[ 1.571222] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[ 1.575190] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.580631] ohci-pci: OHCI PCI platform driver
[ 1.586915] ohci-platform: OHCI generic platform driver
[ 1.591471] ohci-exynos: OHCI EXYNOS driver
[ 1.597163] usbcore: registered new interface driver usb-storage
[ 1.600678] usbcore: registered new interface driver usbserial
[ 1.606868] usbcore: registered new interface driver usbserial_generic
[ 1.612514] usbserial: USB Serial support registered for generic
[ 1.639379] usb3503 usb2513: switched to HUB mode
[ 1.639410] usb3503 usb2513: usb3503_probe: probed in hub mode
[ 1.655892] msm_hsusb 78d9000.usb: 78d9000.usb supply vbus not found, using dummy regulator
[ 1.658753] input: pm8941_pwrkey as /devices/platform/soc/200f000.spmi/spmi-0/0-00/200f000.spmi:pm8916@0:pwrkey@800/input/input0
[ 1.664517] i2c /dev entries driver
[ 1.675887] i2c_qup 78b6000.i2c: using default clock-frequency 100000
[ 1.678102] i2c_qup 78b6000.i2c:
tx channel not available
[ 1.685392] i2c_qup 78b8000.i2c: using default clock-frequency 100000
[ 1.691462] i2c_qup 78b8000.i2c:
tx channel not available
[ 1.698852] i2c_qup 78ba000.i2c: using default clock-frequency 100000
[ 1.704828] i2c_qup 78ba000.i2c:
tx channel not available
[ 1.715860] qcom-tsens 4a8000.thermal-sensor: tsens calibration failed
[ 1.720301] sdhci: Secure Digital Host Controller Interface driver
[ 1.724795] sdhci: Copyright(c) Pierre Ossman
[ 1.731276] Synopsys Designware Multimedia Card Interface Driver
[ 1.736748] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.743990] sdhci_msm 7864900.sdhci: Got CD GPIO
[ 1.750362] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.753116] usbcore: registered new interface driver usbhid
[ 1.757691] usbhid: USB HID core driver
[ 1.766205] usbcore: registered new interface driver snd-usb-audio
[ 1.768350] NET: Registered protocol family 10
[ 1.773859] Segment Routing with IPv6
[ 1.777503] NET: Registered protocol family 17
[ 1.781299] 9pnet: Installing 9P2000 support
[ 1.785605] Key type dns_resolver registered
[ 1.791281] registered taskstats version 1
[ 1.814385] s1: supplied by regulator-dummy
[ 1.814447] s1: Bringing 0uV into 375000-375000uV
[ 1.817437] msm_hsusb 78d9000.usb: 78d9000.usb supply vbus not found, using dummy regulator
[ 1.826908] s2: supplied by regulator-dummy
[ 1.830632] s3: supplied by regulator-dummy
[ 1.836172] sdhci_msm 7864900.sdhci: Got CD GPIO
[ 1.838987] s3: Bringing 0uV into 375000-375000uV
[ 1.844558] s4: supplied by regulator-dummy
[ 1.850131] s4: Bringing 0uV into 1800000-1800000uV
[ 1.850932] input: gpio_keys as /devices/platform/gpio_keys/input/input1
[ 1.851207] hctosys: unable to open rtc device (rtc0)
[ 1.851654] ALSA device list:
[ 1.851656] No soundcards found.
[ 1.854735] sdhci_msm 7864900.sdhci: Got CD GPIO
[ 1.875662] l1: supplied by s3
[ 1.880044] l1: Bringing 0uV into 375000-375000uV
[ 1.883290] l2: supplied by s3
[ 1.887661] l2: Bringing 0uV into 1200000-1200000uV
[ 1.890989] l3: supplied by s3
[ 1.895370] l3: Bringing 0uV into 375000-375000uV
[ 1.898857] l4: supplied by s4
[ 1.903312] l4: Bringing 0uV into 1750000-1750000uV
[ 1.906731] l5: supplied by s4
[ 1.906793] l5: Bringing 0uV into 1750000-1750000uV
[ 1.906853] Freeing unused kernel memory: 1152K
[ 1.914023] l6: supplied by s4
[ 1.918007] l6: Bringing 0uV into 1800000-1800000uV
[ 1.921799] l7: supplied by s4
[ 1.926126] l7: Bringing 0uV into 1750000-1750000uV
[ 1.931256] l8: supplied by regulator-dummy
[ 1.936959] l8: Bringing 0uV into 1750000-1750000uV
[ 1.937405] l9: supplied by regulator-dummy
[ 1.941055] l9: Bringing 0uV into 1750000-1750000uV
[ 1.945635] l10: supplied by regulator-dummy
[ 1.950112] l10: Bringing 0uV into 1750000-1750000uV
[ 1.955010] l11: supplied by regulator-dummy
[ 1.959552] l11: Bringing 0uV into 1750000-1750000uV
[ 1.964348] l12: supplied by regulator-dummy
[ 1.968747] l12: Bringing 0uV into 1750000-1750000uV
[ 1.973597] l13: supplied by regulator-dummy
[ 1.977979] l13: Bringing 0uV into 1750000-1750000uV
[ 1.982746] l14: supplied by regulator-dummy
[ 1.987148] l14: Bringing 0uV into 1750000-1750000uV
[ 1.991797] l15: supplied by regulator-dummy
[ 1.996347] l15: Bringing 0uV into 1750000-1750000uV
[ 2.001398] l16: supplied by regulator-dummy
[ 2.005587] l16: Bringing 0uV into 1750000-1750000uV
[ 2.010214] l17: supplied by regulator-dummy
[ 2.014752] l17: Bringing 0uV into 3300000-3300000uV
[ 2.020050] l18: supplied by regulator-dummy
[ 2.023957] l18: Bringing 0uV into 1750000-1750000uV
[ 2.081816] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit
[ 2.083425] sdhci_msm 7864900.sdhci: Got CD GPIO
[ 2.142153] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADMA 64-bit
[ 2.153030] mmc0: new HS200 MMC card at address 0001
[ 2.153693] mmcblk0: mmc0:0001 DS2008 7.28 GiB
[ 2.157424] mmcblk0boot0: mmc0:0001 DS2008 partition 1 4.00 MiB
[ 2.165593] mmcblk0boot1: mmc0:0001 DS2008 partition 2 4.00 MiB
[ 2.169014] mmcblk0rpmb: mmc0:0001 DS2008 partition 3 4.00 MiB
[ 2.177765] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 2.179053] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[ 2.189329] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
[ 2.197710] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 2.198505] hub 1-0:1.0: USB hub found
[ 2.202185] hub 1-0:1.0: 1 port detected
[ 2.208607] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 200000000, volt: 1050000, enabled: 1. New: freq: 200000000, volt: 1050000, enabled: 1
[ 2.541916] usb 1-1: new high-speed USB device number 2 using ci_hdrc
[ 2.702618] hub 1-1:1.0: USB hub found
[ 2.702853] hub 1-1:1.0: 3 ports detected
[ 3.005803] usb 1-1.1: new high-speed USB device number 3 using ci_hdrc
[ 3.119275] hub 1-1.1:1.0: USB hub found
[ 3.119599] hub 1-1.1:1.0: 4 ports detected
[ 3.410016] usb 1-1.1.2: new full-speed USB device number 4 using ci_hdrc
[ 7.621153] EXT4-fs (mmcblk0p10): recovery complete
[ 7.622063] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null)
[ 7.888022] systemd[1]: System time before build time, advancing clock.
[ 7.930981] x_tables: Unknown symbol __arch_clear_user (err 0)
[ 7.966906] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 7.967236] systemd[1]: Detected architecture arm64.
[ 8.013042] systemd[1]: Set hostname to <linaro-alip>.
[ 8.191347] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 8.191431] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 8.399084] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.426414] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 8.446575] systemd[1]: Created slice system-getty.slice.
[ 8.467804] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 8.491368] systemd[1]: Listening on udev Kernel Socket.
[ 8.744029] EXT4-fs (mmcblk0p10): re-mounted. Opts: data=ordered
[ 9.171313] systemd-journald[1597]: Received request to flush runtime journal from PID 1
[ 9.881982] qcom-apq8016-sbc 7702000.sound: error getting cpu dai name
[ 9.882114] qcom-apq8016-sbc 7702000.sound: Error resolving dai links: -517
[ 9.908515] rtc-pm8xxx 200f000.spmi:pm8916@0:rtc@6000: rtc core: registered pm8xxx_rtc as rtc0
[ 9.912508] qcom-apq8016-sbc 7702000.sound: error getting cpu dai name
[ 9.920816] qcom-apq8016-sbc 7702000.sound: Error resolving dai links: -517
[ 9.976185] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional mi2s-osr-clk0: -2
[ 9.976273] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional mi2s-osr-clk1: -2
[ 9.986987] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional mi2s-osr-clk2: -2
[ 9.994388] media: Linux media interface: v0.10
[ 9.996287] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: DT property missing, MBHC btn detection disabled
[ 10.001715] videodev: Unknown symbol __arch_copy_in_user (err 0)
[ 10.001805] videodev: Unknown symbol __arch_clear_user (err 0)
[ 10.008655] qcom-apq8016-sbc 7702000.sound: error getting cpu dai name
[ 10.008661] qcom-apq8016-sbc 7702000.sound: Error resolving dai links: -517
[ 10.036047] videodev: Unknown symbol __arch_copy_in_user (err 0)
[ 10.036143] videodev: Unknown symbol __arch_clear_user (err 0)
[ 10.050678] drm: Unknown symbol __arch_clear_user (err 0)
[ 10.060906] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional mi2s-osr-clk3: -2
[ 10.067979] qcom-apq8016-sbc 7702000.sound: error getting codec dai name
[ 10.077234] qcom-apq8016-sbc 7702000.sound: Error resolving dai links: -517
[ 10.085537] qcom-apq8016-sbc 7702000.sound: error getting codec dai name
[ 10.090774] qcom-apq8016-sbc 7702000.sound: Error resolving dai links: -517
[ 10.190570] spidev spi1.0: buggy DT: spidev listed directly in DT
[ 10.196205] ------------[ cut here ]------------
[ 10.203216] WARNING: CPU: 3 PID: 1670 at drivers/spi/spidev.c:730 spidev_probe+0x1f4/0x280 [spidev]
[ 10.203247] Modules linked in: spidev(+) msm_rng snd_soc_msm8916_digital media snd_soc_msm8916_analog rng_core snd_soc_lpass_apq8016 snd_soc_lpass_cpu snd_soc_lpass_platform rtc_pm8xxx snd_soc_apq8016_sbc rpmsg_char i2c_qcom_cci
[ 10.211161] drm: Unknown symbol __arch_clear_user (err 0)
[ 10.231708] CPU: 3 PID: 1670 Comm: systemd-udevd Not tainted 4.14.0-qcomlt-arm64 #1
[ 10.237000] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[ 10.244464] task: ffff80003ce41d00 task.stack: ffff00000c998000
[ 10.251416] PC is at spidev_probe+0x1f4/0x280 [spidev]
[ 10.257058] LR is at spidev_probe+0x1f0/0x280 [spidev]
[ 10.262258] pc : [<ffff000000c78394>] lr : [<ffff000000c78390>] pstate: 40000145
[ 10.267392] sp : ffff00000c99ba80
[ 10.267395] x29: ffff00000c99ba80 x28: ffff80003cf42dd0
[ 10.267404] x27: 00000000014000c0 x26: 0000000000000124
[ 10.267409] x25: ffff80003ce040c8 x24: 0000000000000022
[ 10.267413] x23: 0000000000000000 x22: 0000000000000000
[ 10.267418] x21: 0000000000000000 x20: ffff80003d65c800
[ 10.267423] x19: ffff000000c7a1d8 x18: 0000000000000010
[ 10.267427] x17: 0000ffffbb40ef38 x16: ffff000008230580
[ 10.267432] x15: ffffffffffffffff x14: 0720072007200720
[ 10.267436] x13: 0720072007200720 x12: 0000000000000010
[ 10.267441] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f
[ 10.267445] x9 : 00fefeff36ff7564 x8 : 7f7f7f7fffffffff
[ 10.267450] x7 : 63686f72fefefefe x6 : 0000800080808000
[ 10.267454] x5 : 0000000000000000 x4 : 0000000000000000
[ 10.267459] x3 : ffff000000c7a4f8 x2 : 000000000000d3ea
[ 10.267463] x1 : ffff80003ce41d00 x0 : 0000000000000000
[ 10.267468] Call trace:
[ 10.267472] Exception stack(0xffff00000c99b940 to 0xffff00000c99ba80)
[ 10.267476] b940: 0000000000000000 ffff80003ce41d00 000000000000d3ea ffff000000c7a4f8
[ 10.267480] b960: 0000000000000000 0000000000000000 0000800080808000 63686f72fefefefe
[ 10.267484] b980: 7f7f7f7fffffffff 00fefeff36ff7564 7f7f7f7f7f7f7f7f 0101010101010101
[ 10.267488] b9a0: 0000000000000010 0720072007200720 0720072007200720 ffffffffffffffff
[ 10.267493] b9c0: ffff000008230580 0000ffffbb40ef38 0000000000000010 ffff000000c7a1d8
[ 10.267496] b9e0: ffff80003d65c800 0000000000000000 0000000000000000 0000000000000000
[ 10.267501] ba00: 0000000000000022 ffff80003ce040c8 0000000000000124 00000000014000c0
[ 10.267505] ba20: ffff80003cf42dd0 ffff00000c99ba80 ffff000000c78390 ffff00000c99ba80
[ 10.267509] ba40: ffff000000c78394 0000000040000145 ffff000000c7a1d8 ffff80003d65c800
[ 10.267513] ba60: 0001000000000000 0000000000000000 ffff00000c99ba80 ffff000000c78394
[ 10.267526] [<ffff000000c78394>] spidev_probe+0x1f4/0x280 [spidev]
[ 10.267532] [<ffff00000867b100>] spi_drv_probe+0x78/0xc8
[ 10.267538] [<ffff0000085d0454>] driver_probe_device+0x324/0x460
[ 10.267543] [<ffff0000085d065c>] __driver_attach+0xcc/0x118
[ 10.267548] [<ffff0000085ce0f4>] bus_for_each_dev+0x4c/0x98
[ 10.267552] [<ffff0000085cfbc0>] driver_attach+0x20/0x28
[ 10.267556] [<ffff0000085cf588>] bus_add_driver+0x1f8/0x298
[ 10.267562] [<ffff0000085d10d8>] driver_register+0x60/0xf8
[ 10.267565] [<ffff00000867b038>] __spi_register_driver+0x58/0x60
[ 10.267574] [<ffff000000c84088>] spidev_init+0x88/0x1000 [spidev]
[ 10.267579] [<ffff0000080839b0>] do_one_initcall+0x38/0x128
[ 10.267584] [<ffff000008156820>] do_init_module+0x58/0x1b0
[ 10.267588] [<ffff0000081556c8>] load_module+0x1e98/0x2398
[ 10.267592] [<ffff000008155e60>] SyS_finit_module+0xd0/0xe8
[ 10.267595] Exception stack(0xffff00000c99bec0 to 0xffff00000c99c000)
[ 10.267598] bec0: 0000000000000007 0000ffffaf517a88 0000000000000000 0000000000000007
[ 10.267602] bee0: 0000000000000000 0000aaab0065c3f0 0000000000000003 0000000000000003
[ 10.267606] bf00: 0000000000000111 0000ffffaf6da3a0 0000000000000001 0000000000000000
[ 10.267610] bf20: 0000000000000001 000000000000270f 0000000000000002 0000000000000000
[ 10.267615] bf40: 0000ffffaf529f90 0000ffffaf5f9b30 0000ffffaf682a70 0000aaab00667920
[ 10.267618] bf60: 0000ffffaf517a88 0000000000000000 0000000000020000 0000aaab006b2f10
[ 10.267622] bf80: 0000aaab00667920 0000000000000000 0000000000000001 0000ffffdb72b8f0
[ 10.267627] bfa0: 0000000000000000 0000ffffdb72b750 0000ffffaf51041c 0000ffffdb72b750
[ 10.267631] bfc0: 0000ffffaf5f9b54 0000000040000000 0000000000000007 0000000000000111
[ 10.267635] bfe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 10.267639] [<ffff000008083808>] __sys_trace_return+0x0/0x4
[ 10.267641] ---[ end trace 17bfb79acbb29350 ]---
[ 10.271514] qcom-apq8016-sbc 7702000.sound: error getting codec dai name
[ 10.271520] qcom-apq8016-sbc 7702000.sound: Error resolving dai links: -517
[ 10.271981] spidev spi0.0: buggy DT: spidev listed directly in DT
[ 10.272022] ------------[ cut here ]------------
[ 10.272037] WARNING: CPU: 3 PID: 1670 at drivers/spi/spidev.c:730 spidev_probe+0x1f4/0x280 [spidev]
[ 10.272039] Modules linked in: spidev(+) msm_rng snd_soc_msm8916_digital media snd_soc_msm8916_analog rng_core snd_soc_lpass_apq8016 snd_soc_lpass_cpu snd_soc_lpass_platform rtc_pm8xxx snd_soc_apq8016_sbc rpmsg_char i2c_qcom_cci
[ 10.272063] CPU: 3 PID: 1670 Comm: systemd-udevd Tainted: G W 4.14.0-qcomlt-arm64 #1
[ 10.272065] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[ 10.272068] task: ffff80003ce41d00 task.stack: ffff00000c998000
[ 10.272076] PC is at spidev_probe+0x1f4/0x280 [spidev]
[ 10.272083] LR is at spidev_probe+0x1f0/0x280 [spidev]
[ 10.272085] pc : [<ffff000000c78394>] lr : [<ffff000000c78390>] pstate: 40000145
[ 10.272087] sp : ffff00000c99ba80
[ 10.272088] x29: ffff00000c99ba80 x28: ffff80003cf42dd0
[ 10.272092] x27: 00000000014000c0 x26: 0000000000000124
[ 10.272096] x25: ffff80003ce040c8 x24: 0000000000000023
[ 10.272100] x23: 0000000000000000 x22: 0000000000000000
[ 10.272103] x21: 0000000000000000 x20: ffff80003d65d800
[ 10.272107] x19: ffff000000c7a1d8 x18: 0000000000000001
[ 10.272111] x17: 0000ffffbb4ddbc8 x16: ffff00000821b7c0
[ 10.272115] x15: ffff0000090c4000 x14: 00000000fffffff0
[ 10.272119] x13: ffff000009232900 x12: 0000000000000010
[ 10.272122] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f
[ 10.272126] x9 : fffefeff00fefeff x8 : 7f7f7f7f7f7f7f7f
[ 10.272130] x7 : 00fefeff5fff7564 x6 : 0000800080808000
[ 10.272134] x5 : 0080808000800000 x4 : 0000000000000000
[ 10.272138] x3 : ffff000000c7a4f8 x2 : 000000000000d75f
[ 10.272141] x1 : ffff80003ce41d00 x0 : 0000000000000000
[ 10.272145] Call trace:
[ 10.272148] Exception stack(0xffff00000c99b940 to 0xffff00000c99ba80)
[ 10.272152] b940: 0000000000000000 ffff80003ce41d00 000000000000d75f ffff000000c7a4f8
[ 10.272156] b960: 0000000000000000 0080808000800000 0000800080808000 00fefeff5fff7564
[ 10.272159] b980: 7f7f7f7f7f7f7f7f fffefeff00fefeff 7f7f7f7f7f7f7f7f 0101010101010101
[ 10.272163] b9a0: 0000000000000010 ffff000009232900 00000000fffffff0 ffff0000090c4000
[ 10.272167] b9c0: ffff00000821b7c0 0000ffffbb4ddbc8 0000000000000001 ffff000000c7a1d8
[ 10.272171] b9e0: ffff80003d65d800 0000000000000000 0000000000000000 0000000000000000
[ 10.272174] ba00: 0000000000000023 ffff80003ce040c8 0000000000000124 00000000014000c0
[ 10.272178] ba20: ffff80003cf42dd0 ffff00000c99ba80 ffff000000c78390 ffff00000c99ba80
[ 10.272183] ba40: ffff000000c78394 0000000040000145 ffff000000c7a1d8 ffff80003d65d800
[ 10.272186] ba60: 0001000000000000 0000000000000000 ffff00000c99ba80 ffff000000c78394
[ 10.272196] [<ffff000000c78394>] spidev_probe+0x1f4/0x280 [spidev]
[ 10.272202] [<ffff00000867b100>] spi_drv_probe+0x78/0xc8
[ 10.272208] [<ffff0000085d0454>] driver_probe_device+0x324/0x460
[ 10.272213] [<ffff0000085d065c>] __driver_attach+0xcc/0x118
[ 10.272218] [<ffff0000085ce0f4>] bus_for_each_dev+0x4c/0x98
[ 10.272222] [<ffff0000085cfbc0>] driver_attach+0x20/0x28
[ 10.272226] [<ffff0000085cf588>] bus_add_driver+0x1f8/0x298
[ 10.272230] [<ffff0000085d10d8>] driver_register+0x60/0xf8
[ 10.272234] [<ffff00000867b038>] __spi_register_driver+0x58/0x60
[ 10.272242] [<ffff000000c84088>] spidev_init+0x88/0x1000 [spidev]
[ 10.272247] [<ffff0000080839b0>] do_one_initcall+0x38/0x128
[ 10.272252] [<ffff000008156820>] do_init_module+0x58/0x1b0
[ 10.272256] [<ffff0000081556c8>] load_module+0x1e98/0x2398
[ 10.272260] [<ffff000008155e60>] SyS_finit_module+0xd0/0xe8
[ 10.272262] Exception stack(0xffff00000c99bec0 to 0xffff00000c99c000)
[ 10.272266] bec0: 0000000000000007 0000ffffaf517a88 0000000000000000 0000000000000007
[ 10.272269] bee0: 0000000000000000 0000aaab0065c3f0 0000000000000003 0000000000000003
[ 10.272273] bf00: 0000000000000111 0000ffffaf6da3a0 0000000000000001 0000000000000000
[ 10.272276] bf20: 0000000000000001 000000000000270f 0000000000000002 0000000000000000
[ 10.272280] bf40: 0000ffffaf529f90 0000ffffaf5f9b30 0000ffffaf682a70 0000aaab00667920
[ 10.272283] bf60: 0000ffffaf517a88 0000000000000000 0000000000020000 0000aaab006b2f10
[ 10.272287] bf80: 0000aaab00667920 0000000000000000 0000000000000001 0000ffffdb72b8f0
[ 10.272290] bfa0: 0000000000000000 0000ffffdb72b750 0000ffffaf51041c 0000ffffdb72b750
[ 10.272294] bfc0: 0000ffffaf5f9b54 0000000040000000 0000000000000007 0000000000000111
[ 10.272297] bfe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 10.272300] [<ffff000008083808>] __sys_trace_return+0x0/0x4
[ 10.272302] ---[ end trace 17bfb79acbb29351 ]---
[ 10.273895] qcom-apq8016-sbc 7702000.sound: error getting codec dai name
[ 10.273900] qcom-apq8016-sbc 7702000.sound: Error resolving dai links: -517
[ 10.327798] remoteproc: Unknown symbol dev_coredumpv (err 0)
[ 10.526960] dm9601 1-1.1.2:1.0 eth0: register 'dm9601' at usb-ci_hdrc.0-1.1.2, Davicom DM96xx USB 10/100 Ethernet, 00:e0:4c:53:44:58
[ 10.528340] qcom-apq8016-sbc 7702000.sound: error getting codec dai name
[ 10.528345] qcom-apq8016-sbc 7702000.sound: Error resolving dai links: -517
[ 10.528483] usbcore: registered new interface driver dm9601
[ 10.532135] usbcore: registered new interface driver sr9700
[ 10.543688] dm9601 1-1.1.2:1.0 enx00e04c534458: renamed from eth0
[ 12.338121] IPv6: ADDRCONF(NETDEV_UP): enx00e04c534458: link is not ready
[ 12.384191] dm9601 1-1.1.2:1.0 enx00e04c534458: link up, 100Mbps, full-duplex, lpa 0xFFFF
[ 12.430059] IPv6: ADDRCONF(NETDEV_UP): enx00e04c534458: link is not ready
[ 12.430125] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04c534458: link becomes ready
[ 12.436044] usb 1-1.1.2: unexpected tiny rx frame
[ 56.992122] random: crng init done
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment