Skip to content

Instantly share code, notes, and snippets.

@unclewalter
unclewalter / stop_audio.applescript
Created June 18, 2023 10:32
Stop all audio cues
tell application id "com.figure53.QLab.5" to tell front workspace
set the_cues to (active cues as list)
repeat with the_cue in the_cues
if q type of the_cue is "Audio" then
stop the_cue
end if
end repeat
end tell
@unclewalter
unclewalter / Wineskin-digico.md
Last active March 7, 2019 04:55
Wineskin setup for DiGiCo offline software

Setting up DiGiCo offline software on OS X

Requirements

Installation

Wineskin First Run

@unclewalter
unclewalter / yeeessss.txt
Last active November 15, 2017 02:08
Australia Voted Yessss!
💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙
💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙
💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙
💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙
💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙
💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙
💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙
💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙
💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙
💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙💚💛💜❤️💙
@unclewalter
unclewalter / fmPhaseEtude.scd
Created March 7, 2016 01:37
Weekly Beats Wk 9
s.boot;
// Defining FM Synth
SynthDef(\fmsynth, {arg freq1, freq2, freq3;
var signal, env;
signal = SinOsc.ar(freq1 * (SinOsc.ar(freq2) + SinOsc.ar(freq3)));
Out.ar(0, signal!2);
}).add;
// Instantiating synth instances
@unclewalter
unclewalter / NixieTubes.ino
Created July 5, 2015 09:22
A very quick crude demonstration of Binary Code Modulation for Angus Gratton which I did on the way home from OpenLab. I haven't tested this, so no guarantees.
// I've written this for nixie tubes since you already have them. This should be able to run this on a Arduino Uno.
// Pin assignments live in globals.h
#include <avr/io.h>
#include <avr/interrupt.h>
#include "globals.h"
volatile byte bit= 128;
volatile Nixie tubes[MAX_TUBES];
// Select all and press shift-return
s = Server.local;
s.meter;
s.waitForBoot({
// Instantiate variables to hold tasks for this scope.