unphased

# Description: Boxstarter Script
# Author: Jess Frazelle <jess@linux.com>
# Last Updated: 2017-09-11
#
# Install boxstarter:
# 	. { iwr -useb http://boxstarter.org/bootstrapper.ps1 } | iex; get-boxstarter -Force
#
# You might need to set: Set-ExecutionPolicy RemoteSigned
#
# Run this boxstarter by calling the following from an **elevated** command-prompt:

unphased

Routing tips for VPNs on OS X

When VPNs Just Work™, they're a fantastic way of allowing access to a private network from remote locations. When they don't work it can be an experience in frustration. I've had situations where I can connect to a VPN from my Mac, but various networking situations cause routing conflicts. Here are a couple of cases and how I've been able to get around them.

Specific cases

Case 1: conflicting additional routes.

In this example the VPN we are connecting to has a subnet that does not conflict with our local IP, but has additional routes that conflict in some way with our local network's routing. In my example the remote subnet is 10.0.x.0/24, my local subnet is 10.0.y.0/24, and the conflicting route is 10.0.0.0/8. Without the later route, I can't access all hosts on the VPN without manually adding the route after connecting to the VPN:

unphased

I use tmux splits (panes). Inside one of these panes there's a Vim process, and it has its own splits (windows).

In Vim I have key bindings C-h/j/k/l set to switch windows in the given direction. (Vim default mappings for windows switching are the same, but prefixed with C-W.) I'd like to use the same keystrokes for switching tmux panes.

An extra goal that I've solved with a dirty hack is to toggle between last active panes with C-\.

Here's how it should work: