Skip to content

Instantly share code, notes, and snippets.

@unraze
Created August 24, 2022 03:45
Show Gist options
  • Save unraze/77e6cf15b3074d7d05e5b6ce1e53cc40 to your computer and use it in GitHub Desktop.
Save unraze/77e6cf15b3074d7d05e5b6ce1e53cc40 to your computer and use it in GitHub Desktop.
Official Elegoo Neptune 3 Cura Machine Profile
{
"version": 2,
"name": "ELEGOO NEPTUNE 3",
"inherits": "fdmprinter",
"metadata": {
"visible": true,
"author": "ELEGOO",
"manufacturer": "ELEGOO",
"category": "ELEGOO",
"file_formats": "text/x-gcode",
"icon": "wanhao-icon.png",
"has_materials": true,
"exclude_materials": ["generic_pla", "generic_pla_g"],
"preferred_material": "generic_pla",
"machine_extruder_trains": {
"0": "custom_extruder_9",
"1": "custom_extruder_10"
},
"platform_offset": [
0,
-28,
5
]
},
"overrides": {
"machine_name": {
"default_value": "ELEGOO NEPTUNE 3"
},
"machine_width": {
"default_value": 235
},
"machine_height": {
"default_value": 285
},
"machine_depth": {
"default_value": 235
},
"layer_height":{
"default_value": 0.2
},
"layer_height_0":{
"default_value": 0.25
},
"retraction_combing":{
"default_value": "noskin"
},
"retraction_combing_max_distance":{
"default_value": 10
},
"optimize_wall_printing_order":{
"default_value": true
},
"travel_compensate_overlapping_walls_0_enabled":{
"default_value": false
},
"z_seam_type":{
"default_value": "back"
},
"z_seam_corner":{
"default_value": "z_seam_corner_weighted"
},
"material_initial_print_temperature":{
"default_value": 205,
"value": "max(-273.15, material_print_temperature)"
},
"material_final_print_temperature":{
"default_value": 205,
"value": "max(-273.15, material_print_temperature)"
},
"wall_thickness":{
"default_value": 1.2
},
"wall_line_count":{
"default_value": 3
},
"top_bottom_thickness":{
"default_value": 1.2
},
"top_thickness":{
"default_value": 1.2
},
"bottom_thickness":{
"default_value": 1.2
},
"infill_sparse_density":{
"default_value": 15
},
"machine_heated_bed": {
"default_value": true
},
"speed_print":{
"default_value": 50
},
"material_print_temperature":{
"default_value": 205
},
"material_standby_temperature":{
"default_value": 205,
"settable_per_extruder": false
},
"speed_wall_x":{
"default_value": 25,
"value": "speed_wall"
},
"speed_travel":{
"default_value": 70,
"value": "speed_print if magic_spiralize else 70"
},
"speed_print_layer_0":{
"default_value": 20,
"value": "speed_layer_0 - 5"
},
"retraction_enable":{
"default_value": true
},
"retraction_amount":{
"default_value": 5
},
"retraction_speed":{
"default_value": 45
},
"adhesion_type":{
"default_value": "skirt"
},
"adhesion_extruder_nr":{
"default_value": "0",
"value": "int(1) if extruders_enabled_count > 1 else int(0)"
},
"switch_extruder_retraction_amount":{
"default_value": 10,
"value": "10 if extruders_enabled_count > 1 else machine_heat_zone_length"
},
"raft_margin":{
"default_value": 5
},
"raft_airgap":{
"default_value": 0.25
},
"brim_width":{
"default_value": 5
},
"retraction_hop_enabled":{
"default_value": false
},
"support_infill_rate":{
"default_value": 15
},
"prime_tower_enable": {
"default_value": true
},
"prime_tower_size": {
"default_value": 30
},
"prime_tower_min_volume":{
"default_value": 90
},
"machine_gcode_flavor": {
"default_value": "RepRap (Marlin/Sprinter)"
},
"machine_start_gcode": {
"default_value": "G28 ;home\nG92 E0 ;Reset Extruder\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X1.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X1.1 Y80.0 Z0.28 F1500.0 E10 ;Draw the first line\nG1 X1.4 Y80.0 Z0.28 F5000.0 ;Move to side a little\nG1 X1.4 Y20 Z0.28 F1500.0 E20 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up",
"value": "machine_start_gcode_1 if machine_extruder_count > 1 else machine_start_gcode_2"
},
"machine_end_gcode": {
"default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"value": "machine_end_gcode_1 if machine_extruder_count > 1 else machine_end_gcode_0"
}
}
}
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment