Created
January 2, 2014 13:45
-
-
Save uplink/8219351 to your computer and use it in GitHub Desktop.
arcconf-getconfig.out
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Controllers found: 1 | |
| ---------------------------------------------------------------------- | |
| Controller information | |
| ---------------------------------------------------------------------- | |
| Controller Status : Optimal | |
| Channel description : SAS/SATA | |
| Controller Model : Adaptec 5405 | |
| Controller Serial Number : 1D091194E9A | |
| Physical Slot : 55 | |
| Temperature : 74 C/ 165 F (Normal) | |
| Installed memory : 256 MB | |
| Copyback : Disabled | |
| Background consistency check : Enabled | |
| Automatic Failover : Enabled | |
| Global task priority : High | |
| Performance Mode : Default/Dynamic | |
| Stayawake period : Disabled | |
| Spinup limit internal drives : 0 | |
| Spinup limit external drives : 0 | |
| Defunct disk drive count : 0 | |
| Logical devices/Failed/Degraded : 1/0/0 | |
| SSDs assigned to MaxCache pool : 0 | |
| Maximum SSDs allowed in MaxCache pool : 8 | |
| MaxCache Read Cache Pool Size : 0.000 GB | |
| MaxCache flush and fetch rate : 0 | |
| MaxCache Read, Write Balance Factor : 3,1 | |
| NCQ status : Enabled | |
| Statistics data collection mode : Enabled | |
| -------------------------------------------------------- | |
| Controller Version Information | |
| -------------------------------------------------------- | |
| BIOS : 5.2-0 (18948) | |
| Firmware : 5.2-0 (18948) | |
| Driver : 1.1-7 (28000) | |
| Boot Flash : 5.2-0 (18948) | |
| -------------------------------------------------------- | |
| Controller Battery Information | |
| -------------------------------------------------------- | |
| Status : Not Installed | |
| ---------------------------------------------------------------------- | |
| Logical device information | |
| ---------------------------------------------------------------------- | |
| Logical device number 0 | |
| Logical device name : plop | |
| RAID level : 5 | |
| Status of logical device : Optimal | |
| Size : 3809270 MB | |
| Stripe-unit size : 256 KB | |
| Read-cache mode : Enabled | |
| MaxCache preferred read cache setting : Disabled | |
| MaxCache read cache setting : Disabled | |
| Write-cache mode : Disabled (write-through) | |
| Write-cache setting : Disabled (write-through) | |
| Partitioned : Yes | |
| Protected by Hot-Spare : No | |
| Bootable : Yes | |
| Failed stripes : No | |
| Power settings : Disabled | |
| -------------------------------------------------------- | |
| Logical device segment information | |
| -------------------------------------------------------- | |
| Segment 0 : Present (Controller:1,Connector:0,Device:0) Y2O483PAS | |
| Segment 1 : Present (Controller:1,Connector:0,Device:1) Y2O3MYTGS | |
| Segment 2 : Present (Controller:1,Connector:0,Device:2) Y2O3M8RGS | |
| ---------------------------------------------------------------------- | |
| Physical Device information | |
| ---------------------------------------------------------------------- | |
| Device #0 | |
| Device is a Hard drive | |
| State : Online | |
| Supported : Yes | |
| Transfer Speed : SATA 3.0 Gb/s | |
| Reported Channel,Device(T:L) : 0,0(0:0) | |
| Reported Location : Connector 0, Device 0 | |
| Vendor : | |
| Model : TOSHIBA DT01ACA2 | |
| Firmware : MX4OABB0 | |
| Serial number : Y2O483PAS | |
| Size : 1907729 MB | |
| Write Cache : Enabled (write-back) | |
| FRU : None | |
| S.M.A.R.T. : No | |
| S.M.A.R.T. warnings : 0 | |
| Power State : Full rpm | |
| Supported Power States : Full rpm,Powered off,Reduced rpm | |
| SSD : No | |
| MaxCache Capable : No | |
| MaxCache Assigned : No | |
| NCQ status : Enabled | |
| Device #1 | |
| Device is a Hard drive | |
| State : Online | |
| Supported : Yes | |
| Transfer Speed : SATA 3.0 Gb/s | |
| Reported Channel,Device(T:L) : 0,1(1:0) | |
| Reported Location : Connector 0, Device 1 | |
| Vendor : | |
| Model : TOSHIBA DT01ACA2 | |
| Firmware : MX4OABB0 | |
| Serial number : Y2O3MYTGS | |
| Size : 1907729 MB | |
| Write Cache : Enabled (write-back) | |
| FRU : None | |
| S.M.A.R.T. : No | |
| S.M.A.R.T. warnings : 0 | |
| Power State : Full rpm | |
| Supported Power States : Full rpm,Powered off,Reduced rpm | |
| SSD : No | |
| MaxCache Capable : No | |
| MaxCache Assigned : No | |
| NCQ status : Enabled | |
| Device #2 | |
| Device is a Hard drive | |
| State : Online | |
| Supported : Yes | |
| Transfer Speed : SATA 3.0 Gb/s | |
| Reported Channel,Device(T:L) : 0,2(2:0) | |
| Reported Location : Connector 0, Device 2 | |
| Vendor : | |
| Model : TOSHIBA DT01ACA2 | |
| Firmware : MX4OABB0 | |
| Serial number : Y2O3M8RGS | |
| Size : 1907729 MB | |
| Write Cache : Enabled (write-back) | |
| FRU : None | |
| S.M.A.R.T. : No | |
| S.M.A.R.T. warnings : 0 | |
| Power State : Full rpm | |
| Supported Power States : Full rpm,Powered off,Reduced rpm | |
| SSD : No | |
| MaxCache Capable : No | |
| MaxCache Assigned : No | |
| NCQ status : Enabled | |
| Device #3 | |
| Device is a Hard drive | |
| State : Online (JBOD) | |
| Supported : Yes | |
| Transfer Speed : SATA 3.0 Gb/s | |
| Reported Channel,Device(T:L) : 0,3(3:0) | |
| Reported Location : Connector 0, Device 3 | |
| Vendor : | |
| Model : ST3000DM001-9YN1 | |
| Firmware : CC4H | |
| Serial number : S1F02BSH | |
| Size : 2861588 MB | |
| Write Cache : Enabled (write-back) | |
| FRU : None | |
| S.M.A.R.T. : No | |
| S.M.A.R.T. warnings : 0 | |
| Power State : Full rpm | |
| Supported Power States : Full rpm,Powered off,Reduced rpm | |
| SSD : No | |
| MaxCache Capable : No | |
| MaxCache Assigned : No | |
| NCQ status : Enabled | |
| Command completed successfully. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment