GCode to print ♥ DNA on a Petri Dish (Z=18.5)

petri-dna-pattern_0014_output.gcode

; Home
G28
; Header
; Generated by gcodetools from Inkscape.
; Using default header. To add your own header create file "header" in the output dir.
; Header end.
; Start cutting path id: path5
; Change tool to Default tool
G0 F1000 Z32.500000
G0 F1000 X87.463705 Y79.185740
G0 F1000 Z18.500000 F100.0
G0 F1000 X78.176174 Y88.460310 Z18.500000 F400.000000
G0 F1000 X77.475252 Y89.317661 Z18.500000
G0 F1000 X76.974637 Y90.268169 Z18.500000
G0 F1000 X76.674321 Y91.280771 Z18.500000
G0 F1000 X76.574295 Y92.324406 Z18.500000
G0 F1000 X76.674549 Y93.368012 Z18.500000
G0 F1000 X76.975075 Y94.380525 Z18.500000
G0 F1000 X77.475863 Y95.330886 Z18.500000
G0 F1000 X78.176906 Y96.188030 Z18.500000
G0 F1000 X79.035251 Y96.888185 Z18.500000
G0 F1000 X79.986943 Y97.388340 Z18.500000
G0 F1000 X81.000875 Y97.688486 Z18.500000
G0 F1000 X82.045941 Y97.788614 Z18.500000
G0 F1000 X83.091035 Y97.688714 Z18.500000
G0 F1000 X84.105053 Y97.388778 Z18.500000
G0 F1000 X85.056886 Y96.888796 Z18.500000
G0 F1000 X85.915431 Y96.188760 Z18.500000
G0 F1000 X87.463339 Y94.643020 Z18.500000
G0 F1000 X89.011247 Y96.188760 Z18.500000
G0 F1000 X89.869792 Y96.888697 Z18.500000
G0 F1000 X90.821626 Y97.388605 Z18.500000
G0 F1000 X91.835643 Y97.688489 Z18.500000
G0 F1000 X92.880738 Y97.788355 Z18.500000
G0 F1000 X93.925805 Y97.688209 Z18.500000
G0 F1000 X94.939738 Y97.388058 Z18.500000
G0 F1000 X95.891431 Y96.887906 Z18.500000
G0 F1000 X96.749779 Y96.187760 Z18.500000
G0 F1000 X97.450941 Y95.330616 Z18.500000
G0 F1000 X97.951825 Y94.380256 Z18.500000
G0 F1000 X98.252430 Y93.367743 Z18.500000
G0 F1000 X98.352757 Y92.324140 Z18.500000
G0 F1000 X98.252805 Y91.280509 Z18.500000
G0 F1000 X97.952574 Y90.267912 Z18.500000
G0 F1000 X97.452066 Y89.317411 Z18.500000
G0 F1000 X96.751279 Y88.460070 Z18.500000
G0 F1000 X87.463705 Y79.185740 Z18.500000
G0 F1000 Z32.500000
; End cutting path id: path5
; Start cutting path id: path1998
; Change tool to Default tool
G0 F1000 Z32.500000
G0 F1000 X80.507712 Y68.798822
G0 F1000 Z18.500000 F100.0
G0 F1000 X80.332066 Y67.397517 Z18.500000 I-5.677622 J0.000000 F400.000000
G0 F1000 X79.846249 Y66.201707 Z18.500000 I-4.595701 J1.170486
G0 F1000 X79.072850 Y65.169483 Z18.500000 I-4.740640 J2.746102
G0 F1000 X78.175183 Y64.447088 Z18.500000 I-3.166059 J3.015295
G0 F1000 X77.387712 Y64.060895 Z18.500000 I-2.569881 J4.244200
G0 F1000 X76.511081 Y63.806513 Z18.500000 I-1.930557 J5.015253
G0 F1000 X75.600770 Y63.677481 Z18.500000 I-1.593992 J7.969914
G0 F1000 X74.366545 Y63.625479 Z18.500000 I-1.234225 J14.620740
G0 F1000 X70.711088 Y63.625479 Z18.500000
G0 F1000 X70.711088 Y73.993052 Z18.500000
G0 F1000 X74.470986 Y73.993052 Z18.500000
G0 F1000 X75.731024 Y73.931003 Z18.500000 I-0.000000 J-12.824987
G0 F1000 X76.657299 Y73.777205 Z18.500000 I-0.697999 J-7.070043
G0 F1000 X77.550113 Y73.504415 Z18.500000 I-1.417297 J-6.236105
G0 F1000 X78.203035 Y73.178407 Z18.500000 I-1.411696 J-3.644148
G0 F1000 X79.155878 Y72.409760 Z18.500000 I-2.445484 J-4.006423
G0 F1000 X79.888026 Y71.409863 Z18.500000 I-3.482464 J-3.317938
G0 F1000 X80.336902 Y70.258229 Z18.500000 I-3.902325 J-2.184318
G0 F1000 X80.507712 Y68.798822 Z18.500000 I-6.149190 J-1.459406
G0 F1000 X80.507712 Y68.798822 Z18.500000
G0 F1000 Z32.500000
; Change tool to Default tool
G0 F1000 Z32.500000
G0 F1000 X77.743492 Y68.819711
G0 F1000 Z18.500000 F100.0
G0 F1000 X77.637391 Y69.817335 Z18.500000 I-4.743205 J-0.000000 F400.000000
G0 F1000 X77.367502 Y70.567367 Z18.500000 I-2.927297 J-0.629777
G0 F1000 X76.901275 Y71.201557 Z18.500000 I-2.120179 J-1.070189
G0 F1000 X76.190792 Y71.709261 Z18.500000 I-2.035653 J-2.097717
G0 F1000 X75.769893 Y71.879488 Z18.500000 I-1.381985 J-2.811605
G0 F1000 X75.348296 Y71.980809 Z18.500000 I-0.876587 J-2.719670
G0 F1000 X74.921280 Y72.031823 Z18.500000 I-0.641605 J-3.557931
G0 F1000 X74.060183 Y72.057401 Z18.500000 I-0.861097 J-14.481867
G0 F1000 X73.384794 Y72.057401 Z18.500000
G0 F1000 X73.384794 Y65.568094 Z18.500000
G0 F1000 X74.060183 Y65.568094 Z18.500000
G0 F1000 X75.011446 Y65.596464 Z18.500000 I-0.000000 J15.962023
G0 F1000 X75.459701 Y65.651647 Z18.500000 I-0.214238 J3.588481
G0 F1000 X75.893493 Y65.774748 Z18.500000 I-0.590244 J2.905801
G0 F1000 X76.330047 Y65.971935 Z18.500000 I-1.155648 J3.140341
G0 F1000 X76.972764 Y66.472633 Z18.500000 I-1.421349 J2.487361
G0 F1000 X77.402315 Y67.085980 Z18.500000 I-1.743551 J1.678168
G0 F1000 X77.645261 Y67.811790 Z18.500000 I-2.682802 J1.301561
G0 F1000 X77.743492 Y68.819711 Z18.500000 I-5.121875 J1.007921
G0 F1000 X77.743492 Y68.819711 Z18.500000
G0 F1000 Z32.500000
; End cutting path id: path1998
; Start cutting path id: path2000
; Change tool to Default tool
G0 F1000 Z32.500000
G0 F1000 X91.975404 Y63.625479
G0 F1000 Z18.500000 F100.0
G0 F1000 X89.399177 Y63.625479 Z18.500000 F400.000000
G0 F1000 X84.998702 Y70.741437 Z18.500000
G0 F1000 X84.998702 Y63.625479 Z18.500000
G0 F1000 X82.547807 Y63.625479 Z18.500000
G0 F1000 X82.547807 Y73.993052 Z18.500000
G0 F1000 X85.743720 Y73.993052 Z18.500000
G0 F1000 X89.524507 Y68.053804 Z18.500000
G0 F1000 X89.524507 Y73.993052 Z18.500000
G0 F1000 X91.975404 Y73.993052 Z18.500000
G0 F1000 X91.975404 Y63.625479 Z18.500000
G0 F1000 Z32.500000
; End cutting path id: path2000
; Start cutting path id: path2002
; Change tool to Default tool
G0 F1000 Z32.500000
G0 F1000 X104.215963 Y63.625479
G0 F1000 Z18.500000 F100.0
G0 F1000 X101.451741 Y63.625479 Z18.500000 F400.000000
G0 F1000 X100.734574 Y65.721275 Z18.500000
G0 F1000 X96.891122 Y65.721275 Z18.500000
G0 F1000 X96.173958 Y63.625479 Z18.500000
G0 F1000 X93.479364 Y63.625479 Z18.500000
G0 F1000 X97.308889 Y73.993052 Z18.500000
G0 F1000 X100.386436 Y73.993052 Z18.500000
G0 F1000 X104.215963 Y63.625479 Z18.500000
G0 F1000 Z32.500000
; Change tool to Default tool
G0 F1000 Z32.500000
G0 F1000 X100.087036 Y67.622113
G0 F1000 Z18.500000 F100.0
G0 F1000 X98.812848 Y71.340235 Z18.500000 F400.000000
G0 F1000 X97.538661 Y67.622113 Z18.500000
G0 F1000 X100.087036 Y67.622113 Z18.500000
G0 F1000 Z32.500000
; End cutting path id: path2002
; Footer
G0 F1000 X0.0000 Y0.0000
; Using default footer. To add your own footer create file "footer" in the output dir.
; end