urjitbhatia/beanstalkd

## beanstalkd
#!/bin/sh
#
# Copyright (c) 2007 Javier Fernandez-Sanguino <jfs@debian.org>
#
# This is free software; you may redistribute it and/or modify
# it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2,
# or (at your option) any later version.
#
# This is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License with
# the Debian operating system, in /usr/share/common-licenses/GPL;  if
# not, write to the Free Software Foundation, Inc., 59 Temple Place,
# Suite 330, Boston, MA 02111-1307 USA
#
### BEGIN INIT INFO
# Provides:          beanstalkd
# Required-Start:    $remote_fs $network $local_fs
# Required-Stop:     $remote_fs $network $local_fs
# Should-Start:      $named
# Should-Stop:
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: in-memory workqueue service
# Description:       beanstalk is a simple, fast, queueing server. Its
#                    interface is generic, but was originally designed
#                    for reducing the latency of page views in high-volume
#                    web applications by running time-consuming tasks
#                    asynchronously.
### END INIT INFO

PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin

DAEMON=/usr/bin/beanstalkd  # Introduce the server's location here
NAME=beanstalkd             # Introduce the short server's name here
DESC="in-memory queueing server" # Introduce a short description here
LOGDIR=/var/log/beanstalkd  # Log directory to use

PIDFILE=/var/run/$NAME.pid

test -x $DAEMON || exit 0

. /lib/lsb/init-functions

# Default options, these can be overriden by the information
# at /etc/default/$NAME
BEANSTALKD_LISTEN_ADDR="127.0.0.1"
BEANSTALKD_LISTEN_PORT=11300
BEANSTALKD_EXTRA=""
BEANSTALKD_BINLOG_DIR="/mnt/beanstalkd_ebs/binlog/" # The binary log file to use
#DIETIME=10              # Time to wait for the server to die, in seconds
                        # If this value is set too low you might not
                        # let some servers to die gracefully and
                        # 'restart' will not work

STARTTIME=1             # Time to wait for the server to start, in seconds
                        # If this value is set each time the server is
                        # started (on start or restart) the script will
                        # stall to try to determine if it is running
                        # If it is not set and the server takes time
                        # to setup a pid file the log message might
                        # be a false positive (says it did not start
                        # when it actually did)

LOGFILE=$LOGDIR/$NAME.log  # Server logfile
DAEMONUSER=beanstalkd   # Users to run the daemons as. If this value
                        # is set start-stop-daemon will chuid the server

# Include defaults if available
if [ -f /etc/default/$NAME ] ; then
    . /etc/default/$NAME
fi

DAEMON_OPTS="-l $BEANSTALKD_LISTEN_ADDR -p $BEANSTALKD_LISTEN_PORT $BEANSTALKD_EXTRA"

# Check that the user exists (if we set a user)
# Does the user exist?
if [ -n "$DAEMONUSER" ] ; then
    if getent passwd | grep -q "^$DAEMONUSER:"; then
        # Obtain the uid and gid
        DAEMONUID=`getent passwd |grep "^$DAEMONUSER:" | awk -F : '{print $3}'`
        DAEMONGID=`getent passwd |grep "^$DAEMONUSER:" | awk -F : '{print $4}'`
    else
        log_failure_msg "The user $DAEMONUSER, required to run $NAME does not exist."
        exit 0
    fi
fi


set -e

running_pid() {
# Check if a given process pid's cmdline matches a given name
    pid=$1
    name=$2
    [ -z "$pid" ] && return 1
    [ ! -d /proc/$pid ] &&  return 1
    cmd=`cat /proc/$pid/cmdline | tr "\000" "\n"|head -n 1 |cut -d : -f 1`
    # Is this the expected server
    [ "$cmd" != "$name" ] &&  return 1
    return 0
}

running() {
# Check if the process is running looking at /proc
# (works for all users)

    # No pidfile, probably no daemon present
    [ ! -f "$PIDFILE" ] && return 1
    pid=`cat $PIDFILE`
    running_pid $pid $DAEMON || return 1
    return 0
}

start_server() {
# Ensure binary log file location exists
    if [ "${BEANSTALKD_BINLOG_DIR}" != "" ]; then
        if [ ! -d "${BEANSTALKD_BINLOG_DIR}" ]; then
            echo "Creating binlog directory (${BEANSTALKD_BINLOG_DIR})"
            CMDSTATUS=$(mkdir -p ${BEANSTALKD_BINLOG_DIR} && chown ${DAEMONUSER}:${DAEMONUSER} ${BEANSTALKD_BINLOG_DIR})
        fi
        DAEMON_OPTS="${DAEMON_OPTS} -b ${BEANSTALKD_BINLOG_DIR}"
        if [ "${BEANSTALKD_BINLOG_SIZE}" != "" ]; then
            DAEMON_OPTS="${DAEMON_OPTS} -s ${BEANSTALKD_BINLOG_SIZE}"
        fi
    fi
    echo "Daemon opts $DAEMON_OPTS"
# Start the process using the wrapper
        if [ -z "$DAEMONUSER" ] ; then
            start_daemon -p $PIDFILE $DAEMON $DAEMON_OPTS
            errcode=$?
        else
# if we are using a daemonuser then change the user id
            start-stop-daemon --start --quiet --pidfile $PIDFILE \
                        --chuid $DAEMONUSER --make-pidfile --oknodo \
                        --background --exec $DAEMON -- $DAEMON_OPTS
            errcode=$?
        fi
        return $errcode
}

stop_server() {
# Stop the process using the wrapper
        if [ -z "$DAEMONUSER" ] ; then
            killproc -p $PIDFILE $DAEMON
            errcode=$?
        else
# if we are using a daemonuser then look for process that match
            start-stop-daemon --stop --quiet --pidfile $PIDFILE \
                        --user $DAEMONUSER \
                        --exec $DAEMON
            errcode=$?
        fi
        rm -f $PIDFILE

        return $errcode
}

reload_server() {
    [ ! -f "$PIDFILE" ] && return 1
    pid=pidofproc $PIDFILE # This is the daemon's pid
    # Send a SIGHUP
    kill -1 $pid
    return $?
}

force_stop() {
# Force the process to die killing it manually
    [ ! -e "$PIDFILE" ] && return
    if running ; then
        kill -15 $pid
        # Is it really dead?
        sleep "$DIETIME"s
        if running ; then
            kill -9 $pid
            sleep "$DIETIME"s
            if running ; then
                echo "Cannot kill $NAME (pid=$pid)!"
                exit 0
            fi
        fi
    fi
    rm -f $PIDFILE
}


case "$1" in
  start)
        log_daemon_msg "Starting $DESC " "$NAME"
        # Check if it's running first
        if running ;  then
            log_progress_msg "apparently already running"
            log_end_msg 0
            exit 0
        fi
        if start_server ; then
            # NOTE: Some servers might die some time after they start,
            # this code will detect this issue if STARTTIME is set
            # to a reasonable value
            [ -n "$STARTTIME" ] && sleep $STARTTIME # Wait some time
            if  running ;  then
                # It's ok, the server started and is running
                log_end_msg 0
            else
                # It is not running after we did start
                log_end_msg 1
            fi
        else
            # Either we could not start it
            log_end_msg 1
        fi
        ;;
  stop)
        log_daemon_msg "Stopping $DESC" "$NAME"
        if running ; then
            # Only stop the server if we see it running
            errcode=0
            stop_server || errcode=$?
            log_end_msg $errcode
        else
            # If it's not running don't do anything
            log_progress_msg "apparently not running"
            log_end_msg 0
            exit 0
        fi
        ;;
  force-stop)
        # First try to stop gracefully the program
        $0 stop
        if running; then
            # If it's still running try to kill it more forcefully
            log_daemon_msg "Stopping (force) $DESC" "$NAME"
            errcode=0
            force_stop || errcode=$?
            log_end_msg $errcode
        fi
        ;;
  restart|force-reload)
        log_daemon_msg "Restarting $DESC" "$NAME"
        errcode=0
        stop_server || errcode=$?
        # Wait some sensible amount, some server need this
        [ -n "$DIETIME" ] && sleep $DIETIME
        start_server || errcode=$?
        [ -n "$STARTTIME" ] && sleep $STARTTIME
        running || errcode=$?
        log_end_msg $errcode
        ;;
  status)

        log_daemon_msg "Checking status of $DESC" "$NAME"
        if running ;  then
            log_progress_msg "running"
            log_end_msg 0
        else
            log_progress_msg "apparently not running ... "
            log_end_msg 1
            exit 0
        fi
        ;;
  reload)
        log_warning_msg "Reloading $NAME daemon: not implemented (use restart)."
        ;;
  *)
        N=/etc/init.d/$NAME
        echo "Usage: $N {start|stop|force-stop|restart|force-reload|status}" >&2
        exit 1
        ;;
esac

exit 0
	#!/bin/sh
	#
	# Copyright (c) 2007 Javier Fernandez-Sanguino <jfs@debian.org>
	#
	# This is free software; you may redistribute it and/or modify
	# it under the terms of the GNU General Public License as
	# published by the Free Software Foundation; either version 2,
	# or (at your option) any later version.
	#
	# This is distributed in the hope that it will be useful, but
	# WITHOUT ANY WARRANTY; without even the implied warranty of
	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	# GNU General Public License for more details.
	#
	# You should have received a copy of the GNU General Public License with
	# the Debian operating system, in /usr/share/common-licenses/GPL; if
	# not, write to the Free Software Foundation, Inc., 59 Temple Place,
	# Suite 330, Boston, MA 02111-1307 USA
	#
	### BEGIN INIT INFO
	# Provides: beanstalkd
	# Required-Start: $remote_fs $network $local_fs
	# Required-Stop: $remote_fs $network $local_fs
	# Should-Start: $named
	# Should-Stop:
	# Default-Start: 2 3 4 5
	# Default-Stop: 0 1 6
	# Short-Description: in-memory workqueue service
	# Description: beanstalk is a simple, fast, queueing server. Its
	# interface is generic, but was originally designed
	# for reducing the latency of page views in high-volume
	# web applications by running time-consuming tasks
	# asynchronously.
	### END INIT INFO

	PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin

	DAEMON=/usr/bin/beanstalkd # Introduce the server's location here
	NAME=beanstalkd # Introduce the short server's name here
	DESC="in-memory queueing server" # Introduce a short description here
	LOGDIR=/var/log/beanstalkd # Log directory to use

	PIDFILE=/var/run/$NAME.pid

	test -x $DAEMON \|\| exit 0

	. /lib/lsb/init-functions

	# Default options, these can be overriden by the information
	# at /etc/default/$NAME
	BEANSTALKD_LISTEN_ADDR="127.0.0.1"
	BEANSTALKD_LISTEN_PORT=11300
	BEANSTALKD_EXTRA=""
	BEANSTALKD_BINLOG_DIR="/mnt/beanstalkd_ebs/binlog/" # The binary log file to use
	#DIETIME=10 # Time to wait for the server to die, in seconds
	# If this value is set too low you might not
	# let some servers to die gracefully and
	# 'restart' will not work

	STARTTIME=1 # Time to wait for the server to start, in seconds
	# If this value is set each time the server is
	# started (on start or restart) the script will
	# stall to try to determine if it is running
	# If it is not set and the server takes time
	# to setup a pid file the log message might
	# be a false positive (says it did not start
	# when it actually did)

	LOGFILE=$LOGDIR/$NAME.log # Server logfile
	DAEMONUSER=beanstalkd # Users to run the daemons as. If this value
	# is set start-stop-daemon will chuid the server

	# Include defaults if available
	if [ -f /etc/default/$NAME ] ; then
	. /etc/default/$NAME
	fi

	DAEMON_OPTS="-l $BEANSTALKD_LISTEN_ADDR -p $BEANSTALKD_LISTEN_PORT $BEANSTALKD_EXTRA"

	# Check that the user exists (if we set a user)
	# Does the user exist?
	if [ -n "$DAEMONUSER" ] ; then
	if getent passwd \| grep -q "^$DAEMONUSER:"; then
	# Obtain the uid and gid
	DAEMONUID=`getent passwd \|grep "^$DAEMONUSER:" \| awk -F : '{print $3}'`
	DAEMONGID=`getent passwd \|grep "^$DAEMONUSER:" \| awk -F : '{print $4}'`
	else
	log_failure_msg "The user $DAEMONUSER, required to run $NAME does not exist."
	exit 0
	fi
	fi


	set -e

	running_pid() {
	# Check if a given process pid's cmdline matches a given name
	pid=$1
	name=$2
	[ -z "$pid" ] && return 1
	[ ! -d /proc/$pid ] && return 1
	cmd=`cat /proc/$pid/cmdline \| tr "\000" "\n"\|head -n 1 \|cut -d : -f 1`
	# Is this the expected server
	[ "$cmd" != "$name" ] && return 1
	return 0
	}

	running() {
	# Check if the process is running looking at /proc
	# (works for all users)

	# No pidfile, probably no daemon present
	[ ! -f "$PIDFILE" ] && return 1
	pid=`cat $PIDFILE`
	running_pid $pid $DAEMON \|\| return 1
	return 0
	}

	start_server() {
	# Ensure binary log file location exists
	if [ "${BEANSTALKD_BINLOG_DIR}" != "" ]; then
	if [ ! -d "${BEANSTALKD_BINLOG_DIR}" ]; then
	echo "Creating binlog directory (${BEANSTALKD_BINLOG_DIR})"
	CMDSTATUS=$(mkdir -p ${BEANSTALKD_BINLOG_DIR} && chown ${DAEMONUSER}:${DAEMONUSER} ${BEANSTALKD_BINLOG_DIR})
	fi
	DAEMON_OPTS="${DAEMON_OPTS} -b ${BEANSTALKD_BINLOG_DIR}"
	if [ "${BEANSTALKD_BINLOG_SIZE}" != "" ]; then
	DAEMON_OPTS="${DAEMON_OPTS} -s ${BEANSTALKD_BINLOG_SIZE}"
	fi
	fi
	echo "Daemon opts $DAEMON_OPTS"
	# Start the process using the wrapper
	if [ -z "$DAEMONUSER" ] ; then
	start_daemon -p $PIDFILE $DAEMON $DAEMON_OPTS
	errcode=$?
	else
	# if we are using a daemonuser then change the user id
	start-stop-daemon --start --quiet --pidfile $PIDFILE \
	--chuid $DAEMONUSER --make-pidfile --oknodo \
	--background --exec $DAEMON -- $DAEMON_OPTS
	errcode=$?
	fi
	return $errcode
	}

	stop_server() {
	# Stop the process using the wrapper
	if [ -z "$DAEMONUSER" ] ; then
	killproc -p $PIDFILE $DAEMON
	errcode=$?
	else
	# if we are using a daemonuser then look for process that match
	start-stop-daemon --stop --quiet --pidfile $PIDFILE \
	--user $DAEMONUSER \
	--exec $DAEMON
	errcode=$?
	fi
	rm -f $PIDFILE

	return $errcode
	}

	reload_server() {
	[ ! -f "$PIDFILE" ] && return 1
	pid=pidofproc $PIDFILE # This is the daemon's pid
	# Send a SIGHUP
	kill -1 $pid
	return $?
	}

	force_stop() {
	# Force the process to die killing it manually
	[ ! -e "$PIDFILE" ] && return
	if running ; then
	kill -15 $pid
	# Is it really dead?
	sleep "$DIETIME"s
	if running ; then
	kill -9 $pid
	sleep "$DIETIME"s
	if running ; then
	echo "Cannot kill $NAME (pid=$pid)!"
	exit 0
	fi
	fi
	fi
	rm -f $PIDFILE
	}


	case "$1" in
	start)
	log_daemon_msg "Starting $DESC " "$NAME"
	# Check if it's running first
	if running ; then
	log_progress_msg "apparently already running"
	log_end_msg 0
	exit 0
	fi
	if start_server ; then
	# NOTE: Some servers might die some time after they start,
	# this code will detect this issue if STARTTIME is set
	# to a reasonable value
	[ -n "$STARTTIME" ] && sleep $STARTTIME # Wait some time
	if running ; then
	# It's ok, the server started and is running
	log_end_msg 0
	else
	# It is not running after we did start
	log_end_msg 1
	fi
	else
	# Either we could not start it
	log_end_msg 1
	fi
	;;
	stop)
	log_daemon_msg "Stopping $DESC" "$NAME"
	if running ; then
	# Only stop the server if we see it running
	errcode=0
	stop_server \|\| errcode=$?
	log_end_msg $errcode
	else
	# If it's not running don't do anything
	log_progress_msg "apparently not running"
	log_end_msg 0
	exit 0
	fi
	;;
	force-stop)
	# First try to stop gracefully the program
	$0 stop
	if running; then
	# If it's still running try to kill it more forcefully
	log_daemon_msg "Stopping (force) $DESC" "$NAME"
	errcode=0
	force_stop \|\| errcode=$?
	log_end_msg $errcode
	fi
	;;
	restart\|force-reload)
	log_daemon_msg "Restarting $DESC" "$NAME"
	errcode=0
	stop_server \|\| errcode=$?
	# Wait some sensible amount, some server need this
	[ -n "$DIETIME" ] && sleep $DIETIME
	start_server \|\| errcode=$?
	[ -n "$STARTTIME" ] && sleep $STARTTIME
	running \|\| errcode=$?
	log_end_msg $errcode
	;;
	status)

	log_daemon_msg "Checking status of $DESC" "$NAME"
	if running ; then
	log_progress_msg "running"
	log_end_msg 0
	else
	log_progress_msg "apparently not running ... "
	log_end_msg 1
	exit 0
	fi
	;;
	reload)
	log_warning_msg "Reloading $NAME daemon: not implemented (use restart)."
	;;
	*)
	N=/etc/init.d/$NAME
	echo "Usage: $N {start\|stop\|force-stop\|restart\|force-reload\|status}" >&2
	exit 1
	;;
	esac

	exit 0