gistfile1.txt

3369846 bytes read
## Booting kernel from Legacy Image at 82000000 ...
   Image Name:   Linux-3.0.8+
   Image Type:   ARM Linux Kernel Image (lzma compressed)
   Data Size:    3369782 Bytes = 3.2 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Using machid 0xb8e from environment

Starting kernel ...

[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.8+ (root@Thirsty) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #58 PREEMPT Sat Apr 6 20:15:41 CEST 2013
[    0.000000] CPU: ARMv7 Processor [412fc094] revision 4 (ARMv7), cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Amlogic Meson3 reference development platform (legacy)
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] BUG: mapping for 0x84000000 at 0xc4000000 overlaps vmalloc space
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 244480
[    0.000000] Kernel command line: root=/dev/mtdblock2 rw rootfstype=yaffs2 init=/bin/sh rootwait console=ttyS0,115200n8 mem=1024M nohlt a9_clk=800M clk81=187500000 hdmitx=true mac=00:0d:fe:59:a0:8e
[    0.000000] (CTS_DDR_CLK) = 504MHz
[    0.000000] (CTS_MALI_CLK) = 252MHz
[    0.000000] (CTS_A9_CLK) = 800MHz
[    0.000000] CLK81(from MSR_CLK_REG) = 187000000MHz, a9_clk(from args) = 187500000
[    0.000000] set CLK81 to 177MHz
[    0.000000] HDMI DEBUG: hdmitx_boot_para_setup [1629]
[    0.000000] hdmi: disable cec function
[    0.000000] HDMI hdmi_cec_func_config:0x0
[    0.000000] ******** uboot setup mac-addr: 0:d:fe:59:a0:8e
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 64MB 387MB 512MB = 963MB total
[    0.000000] Memory: 967484k/967484k available, 18628k reserved, 393216K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
[    0.000000]     vmalloc : 0xe8800000 - 0xf0000000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe8000000   ( 640 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .init : 0xc0008000 - 0xc002f000   ( 156 kB)
[    0.000000]       .text : 0xc002f000 - 0xc082d000   (8184 kB)
[    0.000000]       .data : 0xc082e000 - 0xc0884320   ( 345 kB)
[    0.000000]        .bss : 0xc0884344 - 0xc09d3f28   (1343 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:128
[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000] MESON TIMER-A c0839660
[    0.000000] Disable timerA
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [ttyS0] enabled
[    0.244359] Calibrating delay loop... 1528.62 BogoMIPS (lpj=7643136)
[    0.280035] pid_max: default: 32768 minimum: 301
[    0.282004] Mount-cache hash table entries: 512
[    0.286779] Initializing cgroup subsys cpuacct
[    0.290816] Initializing cgroup subsys freezer
[    0.295225] CPU: Testing write buffer coherency: ok
[    0.300835] devtmpfs: initialized
[    0.307091] print_constraints: dummy:
[    0.307356] NET: Registered protocol family 16
[    0.314712] L310 cache controller enabled
[    0.315455] l2x0: 8 ways, CACHE_ID 0x4100a0c8, AUX_CTRL 0x7e420001, Cache size: 131072 B
[    0.323674] power hold set high!
[    0.326709] set_vccio and set_vccx2 power up
[    0.330979] set_hdmi power up
[    0.335971] ****** aml_eth_pinmux_setup() ******
[    0.338491] ****** aml_eth_clock_enable() ******
[    0.343229] P_HHI_ETH_CLK_CNTL = 0x4f00
[    0.346891] ****** aml_eth_reset() ******
[    0.380216] chip version=e34c3110
[    0.380248] tv_init_module
[    0.380671] major number 254 for disp
[    0.384386] vout_register_server
[    0.387590] register tv module server ok
[    0.391895] major number 0 for disp
[    0.395213] register tv module server ok
[    0.399449] drivers/amlogic/i2c/aml_i2c.c : aml_i2c_init
[    0.404668] drivers/amlogic/i2c/aml_i2c.c : aml_i2c_probe
[    0.409941] master_no = 0, resource = c083a764, maseter_regs=f1108500
[    0.416580] i2c i2c-0: Invalid 7-bit I2C address 0xb6
[    0.421445] i2c i2c-0: Can't create device at 0xb6
[    0.426142] aml-i2c aml-i2c.0: add adapter aml_i2c_adap0(e7806828)
[    0.432318] aml-i2c aml-i2c.0: aml i2c bus driver.
[    0.437344] HDMI DEBUG: amhdmitx_init [1529]
[    0.441400] HDMI DEBUG: amhdmitx_probe [1340]
[    0.446111] Set HDMI:Chip C
[    0.448397] HDMI DEBUG: hdmi_hw_init [1137]
[    0.452631] amhdmitx amhdmitx.0: HDMI: cannot get platform data
[    0.458780] hdmitx: register switch dev failed
[    0.463518] HDMI irq 1
[    0.465218] HDMI DEBUG: hdmi_task_handle [1076]
[    0.469723] amhdmitx: probe of amhdmitx.0 failed with error -2
[    0.475560] HDMI DEBUG: amhdmitx_probe [1340]
[    0.479853] ------------[ cut here ]------------
[    0.484466] WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0xa4/0xbc()
[    0.490764] sysfs: cannot create duplicate filename '/class/amhdmitx'
[    0.497156] Modules linked in:
[    0.500187] Backtrace:
[    0.502637] [<c0039a64>] (dump_backtrace+0x0/0x110) from [<c06a481c>] (dump_stack+0x18/0x1c)
[    0.511021]  r6:000001c7 r5:c0145204 r4:e7839d30 r3:e7838000
[    0.516657] [<c06a4804>] (dump_stack+0x0/0x1c) from [<c0053cfc>] (warn_slowpath_common+0x5c/0x6c)
[    0.525494] [<c0053ca0>] (warn_slowpath_common+0x0/0x6c) from [<c0053db0>] (warn_slowpath_fmt+0x38/0x40)
[    0.534925]  r8:e7832ed0 r7:e7811000 r6:e7832ed0 r5:e7811000 r4:ffffffef
[    0.541416] r3:00000009
[    0.544021] [<c0053d78>] (warn_slowpath_fmt+0x0/0x40) from [<c0145204>] (sysfs_add_one+0xa4/0xbc)
[    0.552854]  r3:e7811000 r2:c0795578
[    0.556407] [<c0145160>] (sysfs_add_one+0x0/0xbc) from [<c0145d8c>] (create_dir+0x6c/0xc0)
[    0.564633]  r7:00000000 r6:e781c150 r5:00000001 r4:e7831188
[    0.570265] [<c0145d20>] (create_dir+0x0/0xc0) from [<c0145e70>] (sysfs_create_dir+0x90/0x110)
[    0.578844] [<c0145de0>] (sysfs_create_dir+0x0/0x110) from [<c03614b0>] (kobject_add_internal+0xbc/0x1e4)
[    0.588366]  r6:c09c0bd4 r5:e7831188 r4:e7838000
[    0.592958] [<c03613f4>] (kobject_add_internal+0x0/0x1e4) from [<c0361600>] (kset_register+0x28/0x4c)
[    0.602137]  r8:c0839da8 r7:c085106c r6:c09c0bd4 r5:e7831188 r4:e78353c0
[    0.608627] r3:c0361694
[    0.611242] [<c03615d8>] (kset_register+0x0/0x4c) from [<c03bf700>] (__class_register+0xe0/0x218)
[    0.620066]  r5:e7831180 r4:e78353c0
[    0.623620] [<c03bf620>] (__class_register+0x0/0x218) from [<c03bf89c>] (__class_create+0x64/0x84)
[    0.632538]  r8:c0839da8 r7:c09c0bd4 r6:e78353c0 r5:c0789488 r4:00000000
[    0.639028] r3:00000000
[    0.641645] [<c03bf838>] (__class_create+0x0/0x84) from [<c04e8ca8>] (amhdmitx_probe+0x64/0x334)
[    0.650381]  r7:00000000 r6:c0839db0 r5:c0851140 r4:c09c1b60
[    0.656015] [<c04e8c44>] (amhdmitx_probe+0x0/0x334) from [<c03bfafc>] (platform_drv_probe+0x20/0x24)
[    0.665114] [<c03bfadc>] (platform_drv_probe+0x0/0x24) from [<c03be488>] (driver_probe_device+0x84/0x180)
[    0.674640] [<c03be404>] (driver_probe_device+0x0/0x180) from [<c03be618>] (__driver_attach+0x94/0x98)
[    0.683899]  r8:00000000 r7:c03be584 r6:c0839de4 r5:c086575c r4:c0839db0
[    0.690395] r3:00000000
[    0.692997] [<c03be584>] (__driver_attach+0x0/0x98) from [<c03bdbb0>] (bus_for_each_dev+0x68/0x94)
[    0.701915]  r6:e7839ee0 r5:00000000 r4:c086575c r3:00000000
[    0.707548] [<c03bdb48>] (bus_for_each_dev+0x0/0x94) from [<c03be2f4>] (driver_attach+0x24/0x28)
[    0.716294]  r7:00000000 r6:e7834480 r5:c0851140 r4:c086575c
[    0.721926] [<c03be2d0>] (driver_attach+0x0/0x28) from [<c03bd478>] (bus_add_driver+0x1fc/0x2c8)
[    0.730679] [<c03bd27c>] (bus_add_driver+0x0/0x2c8) from [<c03bec5c>] (driver_register+0x80/0x194)
[    0.739596] [<c03bebdc>] (driver_register+0x0/0x194) from [<c03c0010>] (platform_driver_register+0x58/0x60)
[    0.749293]  r8:00000000 r7:c0021914 r6:00000000 r5:c0029fc0 r4:c09c1b60
[    0.755783] r3:00000000
[    0.758396] [<c03bffb8>] (platform_driver_register+0x0/0x60) from [<c0021974>] (amhdmitx_init+0x60/0x8c)
[    0.767840] [<c0021914>] (amhdmitx_init+0x0/0x8c) from [<c002f3e0>] (do_one_initcall+0x3c/0x18c)
[    0.776576]  r4:c0884360 r3:e7838000
[    0.780136] [<c002f3a4>] (do_one_initcall+0x0/0x18c) from [<c0008448>] (kernel_init+0x98/0x124)
[    0.788783]  r9:00000000 r8:00000000 r7:00000013 r6:c00583cc r5:c0029fc0
[    0.795279] r4:c0029a4c
[    0.797889] [<c00083b0>] (kernel_init+0x0/0x124) from [<c00583cc>] (do_exit+0x0/0x7c8)
[    0.805765]  r5:c00083b0 r4:00000000
[    0.809328] ---[ end trace 1b75b31a2719ed1c ]---
[    0.813917] kobject_add_internal failed for amhdmitx with -EEXIST, don't try to register things with the same name in the same directory.
[    0.826205] Backtrace:
[    0.828637] [<c0039a64>] (dump_backtrace+0x0/0x110) from [<c06a481c>] (dump_stack+0x18/0x1c)
[    0.837034]  r6:c09c0bd4 r5:e7831188 r4:ffffffef r3:e7838000
[    0.842666] [<c06a4804>] (dump_stack+0x0/0x1c) from [<c03615d4>] (kobject_add_internal+0x1e0/0x1e4)
[    0.851677] [<c03613f4>] (kobject_add_internal+0x0/0x1e4) from [<c0361600>] (kset_register+0x28/0x4c)
[    0.860851]  r8:c0839da8 r7:c085106c r6:c09c0bd4 r5:e7831188 r4:e78353c0
[    0.867341] r3:c0361694
[    0.869949] [<c03615d8>] (kset_register+0x0/0x4c) from [<c03bf700>] (__class_register+0xe0/0x218)
[    0.878780]  r5:e7831180 r4:e78353c0
[    0.882333] [<c03bf620>] (__class_register+0x0/0x218) from [<c03bf89c>] (__class_create+0x64/0x84)
[    0.891252]  r8:c0839da8 r7:c09c0bd4 r6:e78353c0 r5:c0789488 r4:00000000
[    0.897743] r3:00000000
[    0.900354] [<c03bf838>] (__class_create+0x0/0x84) from [<c04e8ca8>] (amhdmitx_probe+0x64/0x334)
[    0.909089]  r7:00000000 r6:c0839db0 r5:c0851140 r4:c09c1b60
[    0.914728] [<c04e8c44>] (amhdmitx_probe+0x0/0x334) from [<c03bfafc>] (platform_drv_probe+0x20/0x24)
[    0.923827] [<c03bfadc>] (platform_drv_probe+0x0/0x24) from [<c03be488>] (driver_probe_device+0x84/0x180)
[    0.933354] [<c03be404>] (driver_probe_device+0x0/0x180) from [<c03be618>] (__driver_attach+0x94/0x98)
[    0.942613]  r8:00000000 r7:c03be584 r6:c0839de4 r5:c086575c r4:c0839db0
[    0.949104] r3:00000000
[    0.951711] [<c03be584>] (__driver_attach+0x0/0x98) from [<c03bdbb0>] (bus_for_each_dev+0x68/0x94)
[    0.960629]  r6:e7839ee0 r5:00000000 r4:c086575c r3:00000000
[    0.966262] [<c03bdb48>] (bus_for_each_dev+0x0/0x94) from [<c03be2f4>] (driver_attach+0x24/0x28)
[    0.975286] HDMI: EDID Ready
[    0.977869] CEC: Physical address: 2.0.0.0
[    0.981947]  r7:00000000 r6:e7834480 r5:c0851140 r4:c086575c
[    0.987572] [<c03be2d0>] (driver_attach+0x0/0x28) from [<c03bd478>] (bus_add_driver+0x1fc/0x2c8)
[    0.996604] [<c03bd27c>] (bus_add_driver+0x0/0x2c8) from [<c03bec5c>] (driver_register+0x80/0x194)
[    1.005305] [<c03bebdc>] (driver_register+0x0/0x194) from [<c03c0010>] (platform_driver_register+0x58/0x60)
[    1.014954]  r8:00000000 r7:c0021914 r6:00000000 r5:c0029fc0 r4:c09c1b60
[    1.021427] r3:00000000
[    1.024039] [<c03bffb8>] (platform_driver_register+0x0/0x60) from [<c0021974>] (amhdmitx_init+0x60/0x8c)
[    1.033484] [<c0021914>] (amhdmitx_init+0x0/0x8c) from [<c002f3e0>] (do_one_initcall+0x3c/0x18c)
[    1.042220]  r4:c0884360 r3:e7838000
[    1.045775] [<c002f3a4>] (do_one_initcall+0x0/0x18c) from [<c0008448>] (kernel_init+0x98/0x124)
[    1.054432]  r9:00000000 r8:00000000 r7:00000013 r6:c00583cc r5:c0029fc0
[    1.060927] r4:c0029a4c
[    1.063533] [<c00083b0>] (kernel_init+0x0/0x124) from [<c00583cc>] (do_exit+0x0/0x7c8)
[    1.071408]  r5:c00083b0 r4:00000000
[    1.074972] amhdmitx: probe of amhdmitx failed with error -1
[    1.131141] bio: create slab <bio-0> at 0
[    1.132577] SCSI subsystem initialized
[    1.134174] usbcore: registered new interface driver usbfs
[    1.139145] usbcore: registered new interface driver hub
[    1.144523] usbcore: registered new device driver usb
[    1.153059] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    1.156749] cfg80211: Calling CRDA to update world regulatory domain
[    1.162444] Switching to clocksource Timer-E
[    1.170046] Switched to NOHz mode on CPU #0
[    1.187112] NET: Registered protocol family 2
[    1.187241] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.193348] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.202625] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[    1.207546] TCP: Hash tables configured (established 131072 bind 65536)
[    1.213545] TCP reno registered
[    1.216706] UDP hash table entries: 512 (order: 1, 8192 bytes)
[    1.222484] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[    1.228912] NET: Registered protocol family 1
[    1.233287] RPC: Registered named UNIX socket transport module.
[    1.238976] RPC: Registered udp transport module.
[    1.243599] RPC: Registered tcp transport module.
[    1.248287] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.274927] highmem bounce pool size: 64 pages
[    1.275339] ashmem: initialized
[    1.289892] VFS: Disk quotas dquot_6.5.2
[    1.290289] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.299501] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.304063] NTFS driver 2.1.30 [Flags: R/W].
[    1.305537] fuse init (API version 7.16)
[    1.310372] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[    1.319795] msgmni has been set to 1121
[    1.321919] io scheduler noop registered
[    1.324558] io scheduler deadline registered (default)
[    1.755590] brd: module loaded
[    1.760893] loop: module loaded
[    1.764970] usbcore: registered new interface driver cdc_acm
[    1.765081] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.773370] Initializing USB Mass Storage driver...
[    1.778194] usbcore: registered new interface driver usb-storage
[    1.783875] USB Mass Storage support registered.
[    1.788936] usbcore: registered new interface driver usbserial
[    1.794269] usbserial: USB Serial Driver core
[    1.798846] USB Serial support registered for GSM modem (1-port)
[    1.804777] usbcore: registered new interface driver option
[    1.810186] option: v0.7.2:USB Driver for GSM modems
[    1.816327] mousedev: PS/2 mouse device common for all mice
[    1.821948] i2c /dev entries driver
[    1.824943] cpuidle: using governor ladder
[    1.828290] cpuidle: using governor menu
[    1.833290] usbcore: registered new interface driver usbhid
[    1.837711] usbhid: USB HID core driver
[    1.842709] logger: created 256K log 'log_main'
[    1.846582] logger: created 256K log 'log_events'
[    1.851151] logger: created 256K log 'log_radio'
[    1.855696] logger: created 256K log 'log_system'
[    1.860335] vout_init_module
[    1.862870] ge2d_init
[    1.864956] ge2d_dev major:250
[    1.868998] ge2d start monitor
[    1.871271] osd_init
[    1.873413] [0x1b7e] = 0xff
[    1.876223] ge2d workqueue monitor start
[    1.880109] [0x105f] = 0x0
[    1.882788] [0x104f] = 0x40003
[    1.885819] [0x1058] = 0x40e8
[    1.888794] [0x107f] = 0x8c0000c3
[    1.892056] [0x105c] = 0x1043e
[    1.895086] [0x1066] = 0x10843
[    1.898135] [0x1059] = 0x100
[    1.900976] [0x105f] = 0x80000
[    1.904008] [0x105f] = 0x88001
[    1.907048] [0x105f] = 0x80003
[    1.910071] [0x104a] = 0x101
[    1.912929] [0x1bb8] = 0x52
[    1.915700] [0x1b62] = 0x2029
[    1.918652] [0x1b8d] = 0x40
[    1.921417] [0x1b8e] = 0x19
[    1.924188] [0x1b94] = 0x288
[    1.927054] [0x1b95] = 0xc87
[    1.929905] [0x1b97] = 0xce3
[    1.932763] [0x1b98] = 0x50
[    1.935535] [0x1b99] = 0xf0
[    1.938313] [0x1b9a] = 0x50
[    1.941078] [0x1b9b] = 0x2b0
[    1.943936] [0x1b9c] = 0xcb0
[    1.946801] [0x1b9d] = 0x4
[    1.949480] [0x1b9e] = 0x8
[    1.952165] [0x1ba1] = 0x4
[    1.954849] [0x1ba2] = 0x8
[    1.957541] [0x1ba4] = 0x288
[    1.960393] [0x1ba3] = 0xc87
[    1.963251] [0x1ba6] = 0x1d
[    1.966032] [0x1baf] = 0x2ec
[    1.968881] [0x1ba7] = 0x100
[    1.971739] [0x1ba8] = 0xa8
[    1.974511] [0x1ba9] = 0xa8
[    1.977289] [0x1baa] = 0x100
[    1.980141] [0x1bab] = 0x0
[    1.982826] [0x1bac] = 0x5
[    1.985511] [0x1bae] = 0x2ed
[    1.988384] [0x1b68] = 0x100
[    1.991227] [0x1b60] = 0x0
[    1.993912] [0x1b6e] = 0x200
[    1.996779] [0x1b58] = 0x0
[    1.999455] [0x1b7e] = 0x0
[    2.002141] [0x1b64] = 0x9061
[    2.005085] [0x1b65] = 0xa061
[    2.008038] [0x1b66] = 0xb061
[    2.010975] [0x1b78] = 0x1
[    2.013660] [0x1b79] = 0x1
[    2.016352] [0x1b7a] = 0x1
[    2.019030] [0x1b7b] = 0x1
[    2.021715] [0x1b7c] = 0x1
[    2.024400] [0x1b7d] = 0x1
[    2.027092] [0x271a] = 0xa
[    2.029770] [0x1bfc] = 0x1000
[    2.032715] [0x1c0d] = 0x3210
[    2.035660] [0x1c0e] = 0x54
[    2.038438] [0x1b80] = 0x1
[    2.041116] [0x1b57] = 0x0
[    2.043803] tvoutc_setmode[267]
[    2.046927] mode is: 6
[    2.049260] VPU_VIU_VENC_MUX_CTRL: 0xa
[    2.052982] viu chan = 1
[    2.055494] VPU_VIU_VENC_MUX_CTRL: 0xa
[    2.059300]  clk_util_clk_msr 6 = 149
[    2.062922]  clk_util_clk_msr 7 = 187
[    2.066569]  clk_util_clk_msr 8 = 149
[    2.070197]  clk_util_clk_msr 9 = 149
[    2.073835]  clk_util_clk_msr 10 = 149
[    2.077567]  clk_util_clk_msr 27 = 149
[    2.081284]  clk_util_clk_msr 29 = 149
[    2.084974] [osd0] 0x84100000-0x844fffff
[    2.088950] Frame buffer memory assigned at phy:0x84100000, vir:0xe9000000, size=4096K
[    2.096753] ---------------clear framebuffer0 memory
[    2.135655] Console: switching to colour frame buffer device 160x45
[    2.154235] [osd1] 0x84500000-0x845fffff
[    2.155210] Frame buffer memory assigned at phy:0x84500000, vir:0xe8a00000, size=1024K
[    2.163076] ---------------clear framebuffer1 memory
[    2.170845] osd probe ok
[    2.171189] vout2_init_module enter
[    2.174736]  set pinmux c083a78c
[    2.178831] UART_ttyS0:(irq = 90)
[    2.181181] dwc_otg: version 2.20a 13-Jan-2012
[    2.185622] Amlogic nand flash uboot driver, Version K1.01.003 (c) 2010 Amlogic Inc.
[    2.193202] ####Version of Uboot must be newer than U1.01.001!!!!!
[    2.199417] 1
[    2.200909] chip->controller=c09b7e60
[    2.204639] init bus_cycle=17, bus_timing=10, start_cycle=10, end_cycle=10,system=5.3ns
[    2.212978] No NAND device found.
[    2.216053] NAND device id: 2c 68 4 4a a9 0
[    2.220053] NAND device: Manufacturer ID: 0x2c, Chip ID: 0x2c (Micron C revision NAND 4GiB MT29F32G-C)
[    2.229490] #####aml_nand_init, with RB pins and chip->chip_delay:20
[    2.235646] bus_cycle=4, bus_timing=5, start_cycle=5, end_cycle=6,system=5.3ns
[    2.242847]  oob layout use nand base oob layout oobsize = 16,oobmul =2,mtd->oobsize =448,aml_chip->oob_size =224
[    2.278033] aml nand env valid addr: 74000
[    2.329180]  NAND bbt detect Bad block at 5a00000
[    2.329260] Creating 5 MTD partitions on "C revision NAND 4GiB MT29F32G-C":
[    2.335349] 0x000000800000-0x000000c00000 : "logo"
[    2.342275] 0x000000c00000-0x000001400000 : "boot"
[    2.347007] 0x000001400000-0x000021400000 : "system"
[    2.349816]  NAND bbt detect Bad block at 5a00000
[    2.356779] 0x000021400000-0x000034000000 : "cache"
[    2.361510] 0x000034000000-0x000100000000 : "userdata"
[    2.367157] ethernetinit(dbg[c09b7e7c]=0)
[    2.368714] find phy phy_Identifier=7c0f1
[    2.372511] write mac add to:e79ed108: 00 0d fe 59 a0 8e |...Y..|
[    2.378889] eth0: mixed no checksumming and other settings.
[    2.384609] SARADC Driver init.
[    2.387727] Remote Driver
[    2.390000] ADC Keypad Driver init.
[    2.393346] chan #4 used for ADC key
[    2.396956] menu key(139) registed.
[    2.400304] vol- key(114) registed.
[    2.403775] vol+ key(115) registed.
[    2.407270] exit key(158) registed.
[    2.410696] home key(102) registed.
[    2.414445] input: adc_keypad as /devices/platform/m1-adckp.0/input/input0
[    2.421739] adc keypad register input device completed.
[    2.426417] adc keypad major:249
[    2.430583] Meson KeyInput init
[    2.432761] Key 116 registed.
[    2.435957] input: key_input as /devices/platform/meson-keyinput.0/input/input1
[    2.443659] Meson KeyInput register RTC interrupt
[    2.447549] Meson KeyInput major=248
[    2.453103] Memory Card media Major: 254
[    2.455272] card max_req_size is 128K
[    2.459510] card creat process sucessful
[    2.464340] using rtc device, aml_rtc, for alarms
[    2.467318] aml_rtc aml_rtc: rtc core: registered aml_rtc as rtc0
[    2.474559] efuse--------------------------------------------
[    2.479404] platform_driver_register--aml_keys_driver--------------------
[    2.485878] rtw driver version=v4.0.0_4932.20120822
[    2.491035] Build at: Apr  5 2013 18:13:59
[    2.494885] ##########rtw_suspend_lock_init ###########
[    2.500343] usbcore: registered new interface driver rtl8192cu
[    2.511091] ALSA device list:
[    2.511117]   #0: Dummy 1
[    2.511905] Netfilter messages via NETLINK v0.30.
[    2.516502] nf_conntrack version 0.5.0 (15116 buckets, 60464 max)
[    2.522871] ctnetlink v0.93: registering with nfnetlink.
[    2.527626] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    2.534380] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    2.541108] xt_time: kernel timezone is -0000
[    2.544720] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.550178] arp_tables: (C) 2002 David S. Miller
[    2.554446] TCP cubic registered
[    2.557658] NET: Registered protocol family 17
[    2.562034] NET: Registered protocol family 15
[    2.566463] lib80211: common routines for IEEE802.11 drivers
[    2.572070] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    2.579832] ThumbEE CPU extension supported.
[    2.583992] enter meson_pm_probe!
[    2.587254] meson_pm_probe done 0x0 200!
[    2.595273] aml_rtc aml_rtc: setting system clock to 1970-01-01 01:49:09 UTC (6549)
[    2.616013] Changing baud from 0 to 115200
[    2.636303] yaffs: dev is 32505858 name is "mtdblock2" rw
[    2.636334] yaffs: passed flags ""
[    2.653007] VFS: Mounted root (yaffs2 filesystem) on device 31:2.
[    2.657958] devtmpfs: mounted
[    2.658043] Freeing init memory: 156K
[    2.666032]
[    2.666040] SD/MMC initialization started......
/bin/sh: can't access tty; job control turned off
/ # [    3.106213] sd_mmc_info->card_type=0
[    3.106240] begin SDIO check ......
[    3.131782] sdio_timeout_int_times = 0; timeout = 498
[    3.155886] sdio_timeout_int_times = 0; timeout = 498
[    3.155913] SEND OP timeout @1
[    3.158620] begin SD&SDHC check ......
[    3.176542] set type to SDHC
[    3.356956] Actual delay time in sd_voltage_validation() = 110 ms
[    3.357490] Change from 2 to SD
[    3.360599] S18A : 0
[    3.416541] Got RCA = 43690
[    3.417341]
[    3.417345] ***********CID*************
[    3.419060] 03:53:44:53:55:30:32:47:80:00:86:47:da:00:9b:00:
[    3.424500] MID[8]=3
[    3.426843] OID[16]=SD
[    3.429166] PNM[40]=SU02G
[    3.431758] PRV[8]=128
[    3.434091] PSN[32]=0xda478600
[    3.437124] Reserved[4]=0
[    3.439707] year[8].month[4]=2009.11
[    3.443249] NotUsed[1]=0
[    3.445754] CRC[7]=0
[    3.445757]
[    3.450292]
[    3.450295] ********** CSD v1 **************
[    3.455088] 00:26:00:32:5f:5a:83:ae:fe:fb:cf:ff:92:80:40:00:
[    3.460529] CSD_STRUCTURE[2]=0
[    3.463726] MMC_SPEC_VERS[4]=0
[    3.466758] Reserved1[2]=0
[    3.469431] TAAC[8]=38
[    3.471761] NSAC[8]=0
[    3.474007] TRAN_SPEED[8]=50
[    3.476989] CCC[8+4]=1525
[    3.479451] READ_BL_LEN[4]=10
[    3.482388] READ_BL_PARTIAL[1]=1
[    3.485589] WRITE_BLK_MISALIGN[1]=0
[    3.489049] READ_BLK_MISALIGN[1]=0
[    3.492411] DSR_IMP[1]=0
[    3.494916] Reserved2[2]=0
[    3.497615] C_SIZE[2+8+2]=3771
[    3.500619] VDD_R_CURR_MIN[3]=7
[    3.503732] VDD_R_CURR_MAX[3]=6
[    3.506969] VDD_W_CURR_MIN[3]=7
[    3.509950] VDD_W_CURR_MAX[3]=6
[    3.513060] C_SIZE_MULT[2+1]=7
[    3.516093] ERASE_BLK_EN[1]=1
[    3.519025] SECTOR_SIZE[6+1]=31
[    3.522132] WP_GRP_SIZE[7]=127
[    3.525156] Reserved3[2]=0
[    3.527850] R2W_FACTOR[3]=4
[    3.530600] WRITE_BL_LEN[2+2]=10
[    3.533796] WRITE_BL_PARTIAL[1]=0
[    3.537210] Reserved4[5]=0
[    3.539758] WP_GRP_ENABLE[1]=1
[    3.542782] FILE_FORMAT_GRP[1]=0
[    3.545987] COPY[1]=1
[    3.548225] PERM_WRITE_PROTECT[1]=0
[    3.551684] TMP_WRITE_PROTECT[1]=0
[    3.555050] FILE_FORMAT[2]=0
[    3.557909] Reserved5[2]=0
[    3.560580] CRC[7]=0
[    3.562740] NotUsed[1]=0
[    3.562743]
[    3.566843] !!! convert blk_len !!!
[    3.570617] total block nums : 0x3af000(3862528)
[    3.576049]
[    3.576052] ***********SCR*************
[    3.580020] 02:25:80:00:00:00:00:00:
[    3.583390] SD_SPEC[4]=2
[    3.586081] SCR_STRUCTURE[4]=0
[    3.589092] SD_BUS_WIDTHS[4]=5
[    3.592116] SD_SECURITY[3]=2
[    3.594967] DATA_STAT_AFTER_ERASE[1]=0
[    3.598813] Rsv1[7]=0
[    3.600929] SD_SPEC3[1]=1
[    3.603524] CMD_SUPPORT[2]=0
[    3.606380] Rsv2[6]=0
[    3.608619] Reserved2[32]=0
[    3.608622]
[    3.615034] 00008001 80018001 8001c001 80010000
[    3.617431] 0f000000 00000000 00000000 00000000
[    3.622010] 00000000 00000000 00000000 00000000
[    3.626590] 00000000 00000000 00000000 00000000
[    3.631172] #SD_ERROR_SWITCH_FUNCTION_COMUNICATION error occured in sd_switch_funtion()
[    3.639139] sd_mmc_init() is completed successfully!
[    3.644047] This SD card is working in Wide Bus and at 23MHz Normal Speed mode!
[    3.644052]
[    3.690580]  cardblksd: cardblksd1
[    3.691250] monitor : INSERT