Skip to content

Instantly share code, notes, and snippets.

@vDorst

vDorst/gist:5390024

Created April 15, 2013 18:04
Show Gist options
  • Save vDorst/5390024 to your computer and use it in GitHub Desktop.
Save vDorst/5390024 to your computer and use it in GitHub Desktop.
Download ZIP
A11, dmesg: CEC messages with LG
Raw
gistfile1.txt
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.34 (xbmc@debian2) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #1 Sat Apr 13 08:06:21 EDT 2013
[ 0.000000] CPU: ARMv7 Processor [412fc094] revision 4 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: AMLOGIC MESON3 8726M SKT SH
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] bankstart=0x8cb00000, size=0x13400000
[ 0.000000] bankstart=0xa0000000, size=0x20000000
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 226304
[ 0.000000] free_area_init_node: node 0, pgdat c09242e0, node_mem_map c09aa000
[ 0.000000] Normal zone: 1280 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126720 pages, LIFO batch:31
[ 0.000000] HighMem zone: 768 pages used for memmap
[ 0.000000] HighMem zone: 97536 pages, LIFO batch:31
[ 0.000000] BUG: mapping for 0x84000000 at 0xc4000000 overlaps vmalloc space
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 224256
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rw rootfstype=yaffs2 init=/sbin/init rootwait console=ttyS0,115200n8 nohlt logo=osd1,0x84100000,loaded,1080p androidboot.resolution=1080p resolution_size=1920,1080 mem=1024M a9_clk=800M clk81=187500000 mac=00:0d:fe:59:a0:8e hdmitx=true
[ 0.000000] osd1:1
[ 0.000000] loaded:268435459
[ 0.000000] logo has been loaded
[ 0.000000] 1080p:8
[ 0.000000] (CTS_DDR_CLK) = 408MHz
[ 0.000000] (CTS_MALI_CLK) = 204MHz
[ 0.000000] (CTS_A9_CLK) = 800MHz
[ 0.000000] CLK81(from MSR_CLK_REG) = 187000000MHz, a9_clk(from args) = 187500000
[ 0.000000] set CLK81 to 177MHz
[ 0.000000] ******** uboot setup mac-addr: 0:d:fe:59:a0:8e
[ 0.000000] HDMI DEBUG: hdmitx_boot_para_setup [1540]
[ 0.000000] hdmi: enable cec function
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 64MB 308MB 128MB 384MB = 884MB total
[ 0.000000] Memory: 887844k/887844k available, 17372k reserved, 393216K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xe8800000 - 0xf0000000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0038000 ( 192 kB)
[ 0.000000] .text : 0xc0038000 - 0xc08d3024 (8813 kB)
[ 0.000000] .data : 0xc08d4000 - 0xc0924be0 ( 323 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:128
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [ttyS0] enabled
[ 0.249944] Calibrating delay loop... 1222.24 BogoMIPS (lpj=6111232)
[ 0.490154] Mount-cache hash table entries: 512
[ 0.492232] Initializing cgroup subsys cpuacct
[ 0.496176] Initializing cgroup subsys freezer
[ 0.500676] CPU: Testing write buffer coherency: ok
[ 0.506314] devtmpfs: initialized
[ 0.510905] NET: Registered protocol family 16
[ 0.513798] L2X0 cache controller enabled
[ 0.517131] +++ hardware id = 0x2 +++
[ 0.520816] power hold set high!
[ 0.523972] set_vccio and set_vcck power up
[ 0.528131] set_hdmi power up
[ 0.531086] select eth clk-7,source=50000000,out=50000000
[ 0.536654] meson_eth_reset
[ 0.640060] ***m1_init_machine: usb set mode.
[ 0.640084] USB PHY clock souce: XTAL input divided by 2
[ 0.644154] register lm device 0
[ 0.647391] register lm device 1
[ 0.650636] chip version=e34c3110
[ 0.653871] major number 0 for disp
[ 0.657400] register tv module server ok
[ 0.661527] major number 0 for disp
[ 0.665022] register tv module server ok
[ 0.687299] bio: create slab <bio-0> at 0
[ 0.687882] SCSI subsystem initialized
[ 0.689658] libata version 3.00 loaded.
[ 0.689822] usbcore: registered new interface driver usbfs
[ 0.695094] usbcore: registered new interface driver hub
[ 0.700361] usbcore: registered new device driver usb
[ 0.708356] Advanced Linux Sound Architecture Driver Version 1.0.22.1.
[ 0.712156] Bluetooth: Core ver 2.15
[ 0.715480] NET: Registered protocol family 31
[ 0.719709] Bluetooth: HCI device and connection manager initialized
[ 0.726065] Bluetooth: HCI socket layer initialized
[ 0.731098] cfg80211: Calling CRDA to update world regulatory domain
[ 0.737361] Switching to clocksource Timer-E
[ 0.742227] NET: Registered protocol family 2
[ 0.745933] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.753392] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.761023] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.767121] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.773076] TCP reno registered
[ 0.776188] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.782008] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.788365] NET: Registered protocol family 1
[ 0.792854] RPC: Registered udp transport module.
[ 0.797229] RPC: Registered tcp transport module.
[ 0.801941] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.825957] highmem bounce pool size: 64 pages
[ 0.830984] VFS: Disk quotas dquot_6.5.2
[ 0.831221] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.837508] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.843443] Slow work thread pool: Starting up
[ 0.846238] Slow work thread pool: Ready
[ 0.849969] NTFS driver 2.1.29 [Flags: R/W].
[ 0.854722] yaffs built Apr 13 2013 08:02:06 Installing.
[ 0.854773] fuse init (API version 7.13)
[ 0.858679] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[ 0.867535] msgmni has been set to 966
[ 0.873134] alg: No test for stdrng (krng)
[ 0.874114] io scheduler noop registered (default)
[ 0.878811] io scheduler deadline registered
[ 0.883443] io scheduler cfq registered
[ 0.895743] brd: module loaded
[ 0.897862] loop: module loaded
[ 0.899227] usbcore: registered new interface driver cdc_acm
[ 0.902085] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.910485] Initializing USB Mass Storage driver...
[ 0.915462] usbcore: registered new interface driver usb-storage
[ 0.921311] USB Mass Storage support registered.
[ 0.926096] usbcore: registered new interface driver usbserial
[ 0.931772] USB Serial support registered for generic
[ 0.936768] usbcore: registered new interface driver usbserial_generic
[ 0.943240] usbserial: USB Serial Driver core
[ 0.947589] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[ 0.955840] usbcore: registered new interface driver belkin
[ 0.961325] belkin_sa: v1.2:USB Belkin Serial converter driver
[ 0.967170] USB Serial support registered for cp210x
[ 0.972125] usbcore: registered new interface driver cp210x
[ 0.977609] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
[ 0.984412] USB Serial support registered for FTDI USB Serial Device
[ 0.990746] usbcore: registered new interface driver ftdi_sio
[ 0.996422] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
[ 1.002252] USB Serial support registered for GSM modem (1-port)
[ 1.008226] usbcore: registered new interface driver option
[ 1.013742] option: v0.7.2:USB Driver for GSM modems
[ 1.018841] mice: PS/2 mouse device common for all mice
[ 1.024115] i2c /dev entries driver
[ 1.027420] Linux video capture interface: v2.00
[ 1.031989] au0828 driver loaded
[ 1.035185] usbcore: registered new interface driver au0828
[ 1.040664] uvc_init amlogic
[ 1.043596] usbcore: registered new interface driver uvcvideo
[ 1.049238] USB Video Class driver (v1.1.0)
[ 1.054399] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 1.062361] Registered led device: Powerled
[ 1.062438] Registered led device: Statusled
[ 1.063678] usbcore: registered new interface driver hiddev
[ 1.067383] usbcore: registered new interface driver usbhid
[ 1.072935] usbhid: USB HID core driver
[ 1.076750] start init vout module
[ 1.080299] create vout attribute ok
[ 1.084113] ge2d_init
[ 1.086329] ge2d_dev major:253
[ 1.089622] ge2d start monitor
[ 1.092683] osd_init
[ 1.094755] [osd0] 0x84100000-0x848fffff
[ 1.098775] Frame buffer memory assigned at phy:0x84100000, vir:0xe9000000, size=8192K
[ 1.106529] ---------------clear framebuffer0 memory size=800000.
[ 1.119800] ge2d workqueue monitor start
[ 1.120105] [osd1] 0x84900000-0x850fffff
[ 1.122363] Frame buffer memory assigned at phy:0x84900000, vir:0xea000000, size=8192K
[ 1.130032] init fbdev bpp is :24
[ 1.133687] osd probe ok
[ 1.136234] vout2_init_module enter
[ 1.139676] start init vout2 module
[ 1.143381] create vout2 attribute ok
[ 1.147962] UART_ttyS0:(irq = 90, address = 0xf81004c0)
[ 1.152447] UART_ttyS1:(irq = 26, address = 0xf11084c0)
[ 1.157583] UART_ttyS2:(irq = 75, address = 0xf11084dc)
[ 1.162799] UART_ttyS3:(irq = 93, address = 0xf1108700)
[ 1.167968] Port 0 = IRQ 90
[ 1.170739] Port 1 = IRQ 26
[ 1.173523] Port 2 = IRQ 75
[ 1.176283] Port 3 = IRQ 93
[ 1.179058] Amlogic nand flash AVOS driver for M3, Version 1.1 (c) 2010 Amlogic Inc.
[ 1.186919] bus_cycle=17, bus_timing=10, start_cycle=10, end_cycle=10,system=5.3ns
[ 1.194733] No NAND device found.
[ 1.197874] NAND device id: 2c 68 4 4a a9 0
[ 1.201861] NAND device: Manufacturer ID: 0x2c, Chip ID: 0x2c (Micron C revision NAND 4GiB MT29F32G-C)
[ 1.942139] 1 NAND chips detected
[ 1.942200] #####aml_nand_init, with RB pins and chip->chip_delay:20
[ 1.946304] bus_cycle=4, bus_timing=5, start_cycle=5, end_cycle=6,system=5.3ns
[ 1.953433] oob size is not enough for selected bch mode: NAND_BCH60_1K_MODE force bch to mode: NAND_BCH30_1K_MODE
[ 1.963736] oob layout use nand base oob layout oobsize = 16,oobmul =2,mtd->oobsize =448,aml_chip->oob_size =224
[ 2.003669] aml nand env valid addr: 9e000
[ 2.003691] CONFIG_ENV_SIZE=0x2000; ENV_SIZE=0x1ffc; bbt=0x1330; default_environment_size=0x0
[ 2.046836] set nand parts for chip 4096MB
[ 2.046865] nand env: nand_env_probe.
[ 2.049374] set nand parts for chip 4096MB
[ 2.054482] Creating 6 MTD partitions on "C revision NAND 4GiB MT29F32G-C":
[ 2.060108] 0x000000800000-0x000000c00000 : "logo"
[ 2.065470] 0x000000c00000-0x000001400000 : "boot"
[ 2.070092] 0x000001400000-0x000021400000 : "system"
[ 2.074622] NAND bbt detect Bad block at 5a00000
[ 2.079815] 0x000021400000-0x000034000000 : "cache"
[ 2.084676] 0x000034000000-0x000074000000 : "NFTL_Part"
[ 2.089872] 0x000074000000-0x000100000000 : "userdata"
[ 2.305940] nftl initilize completely dev size: 0x36000000 2
[ 2.306705] avnftl4: p1
[ 2.308915] nftl release flush cache data: 0
[ 2.313108] ethernetinit(dbg[c096b0b4]=0)
[ 2.316944] find phy phy_Identifier=7c0f1
[ 2.320766] write mac add to:e7ebb208: 00 0d fe 59 a0 8e |...Y..|
[ 2.326851] eth0: mixed no checksumming and other settings.
[ 2.332944] ethernet_pm_driver init
[ 2.335880] ethernet_pm_driver probe!
[ 2.339522] dwc_otg: version 2.60a 22-NOV-2006
[ 2.343966] dwc_otg lm0: start=0xf9040000
[ 2.343976] dwc_otg lm0: core work at High speed.
[ 2.343983] dwc_otg lm0: DMA config: BURST_SINGLE
[ 2.761493] dwc_otg lm0: Working on port type = HOST
[ 2.761514] DWC_otg: Using DMA mode
[ 2.761531] dwc_otg lm0: DWC OTG Controller
[ 2.763667] dwc_otg lm0: new USB bus registered, assigned bus number 1
[ 2.770125] dwc_otg lm0: irq 30, io mem 0x00000000
[ 2.774919] DWC_otg: Init: Port Power? op_state=1
[ 2.779539] DWC_otg: Init: Power Port (0)
[ 2.784034] hub 1-0:1.0: USB hub found
[ 2.787262] hub 1-0:1.0: 1 port detected
[ 2.791383] dwc_otg lm1: start=0xf90c0000
[ 2.791393] dwc_otg lm1: core work at High speed.
[ 2.791400] dwc_otg lm1: DMA config: BURST_SINGLE
[ 3.211495] dwc_otg lm1: Working on port type = HOST
[ 3.211514] DWC_otg: Using DMA mode
[ 3.211532] dwc_otg lm1: DWC OTG Controller
[ 3.213644] dwc_otg lm1: new USB bus registered, assigned bus number 2
[ 3.220122] dwc_otg lm1: irq 31, io mem 0x00000000
[ 3.224915] DWC_otg: Init: Port Power? op_state=1
[ 3.229539] DWC_otg: Init: Power Port (0)
[ 3.233536] set usb b port power on.
[ 3.237557] hub 2-0:1.0: USB hub found
[ 3.240812] hub 2-0:1.0: 1 port detected
[ 3.245084] Amlogic A/V streaming port init
[ 3.249949] regist mpeg12 codec profile
[ 3.252764] regist mpeg4 codec profile
[ 3.256388] amvdec_vc1 module init
[ 3.259801] regist vc1 codec profile
[ 3.263335] amvdec_avs module init
[ 3.266736] amvdec_h264 module init
[ 3.270192] regist h264 codec profile
[ 3.273818] amvdec_h264mvc module init
[ 3.277612] regist mjpeg codec profile
[ 3.281246] amvdec_real module init
[ 3.284816] regist real codec profile
[ 3.288945] Vsync pts inc(before): 1500
[ 3.292210] Vsync pts inc(after): 1497
[ 3.296675] pdev_id = 0, plat_udelay = 2, plat_timeout = 100
[ 3.301954] aml gpio i2c bus [0] initialized
[ 3.305884] Keypad Driver
[ 3.308869] input: aml_keypad as /devices/platform/m1-kp.0/input/input0
[ 3.315068] <FIQ>:Deinterlace: Init 100us T
[ 3.315075] 0
[ 3.321051] remote config major:249
[ 3.324504] physical address:0xa7ff4000
[ 3.328153] SARADC Driver init.
[ 3.331360] ADC Keypad Driver init.
[ 3.334768] chan #4 used for ADC key
[ 3.338239] recovery key(200) registed.
[ 3.342304] input: adc_keypad as /devices/platform/m1-adckp.0/input/input1
[ 3.349078] adc keypad register input device completed.
[ 3.354231] adc keypad major:248
[ 3.357693] Key input Driver init.
[ 3.360901] Key 116 registed.
[ 3.363991] input: key_input as /devices/platform/m1-keyinput.0/input/input2
[ 3.370959] Key input register input device completed.
[ 3.376047] key_input major:247
[ 3.379591] spi_nor apollospi:0: mx25l3205d (4096 Kbytes)
[ 3.384619] Creating 2 MTD partitions on "apollospi:0":
[ 3.389785] 0x00000004e000-0x000000050000 : "ubootenv"
[ 3.395414] 0x0000003fe000-0x000000400000 : "ids"
[ 3.400759] Memory Card media Major: 253
[ 3.403683] card max_req_size is 128K
[ 3.407615] card creat process sucessful
[ 3.411185] [dsp]DSP start addr 0xc4000000
[ 3.415314] [dsp]register dsp to char divece(232)
[ 3.424539] DSP pcmenc stream buffer to [0xa6801000-0xa6a01000]
[ 3.425719] amlogic audio dsp pcmenc device init!
[ 3.430678] amlogic audio spdif interface device init!
[ 3.437504] DSP log stream buffer to [0xa7280000-0xa72fffe0]
[ 3.441135] amlogic audio dsp log device init!
[ 3.446123] aml_rtc aml_rtc: rtc core: registered aml_rtc as rtc0
[ 3.452466] amlogic power supply init
[ 3.455340] gpio dev major number:240
[ 3.459287] create gpio device success
[ 3.462963] efuse===========================================
[ 3.468532] efuse: device efuse created
[ 3.472265] efuse--------------------------------------------
[ 3.478248] HDMI DEBUG: amhdmitx_init [1448]
[ 3.482233] HDMI DEBUG: amhdmitx_probe [1285]
[ 3.486764] hdmin get hdmi platform data
[ 3.490333] HDMI DEBUG: amhdmitx_probe [1357]
[ 3.494848] HDMITX_M1B_InitSet HDMI:Chip C
[ 3.498814] hdmin get brd phy data
[ 3.502143] hdmi phy setting
[ 3.505068] hdmin get brd phy data
[ 3.508346] hdmi phy setting
[ 3.511315] CEC Init
[ 3.513775] aml_wdt_init, register platform driver...
[ 3.518659] aml_wdt_probe, driver probe ok
[ 3.522749] Bluetooth: Virtual HCI driver ver 1.3
[ 3.527313] Bluetooth: Broadcom Blutonium firmware driver ver 1.2
[ 3.533743] input: Unspecified device as /devices/virtual/input/input3
[ 3.539880] CEC Init done
[ 3.544731] usbcore: registered new interface driver bcm203x
[ 3.547939] Bluetooth: Digianswer Bluetooth USB driver ver 0.10
[ 3.554032] HDMI irq 0
[ 3.556166] HDMI Error: Unkown HDMI Interrupt source Process_Irq
[ 3.562265] usbcore: registered new interface driver bpa10x
[ 3.567685] Bluetooth: BlueFRITZ! USB driver ver 1.2
[ 3.572728] HDMI DEBUG: hdmi_task_handle [1017]
[ 3.577222] usbcore: registered new interface driver bfusb
[ 3.582732] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 3.588229] usbcore: registered new interface driver btusb
[ 3.593612] Bluetooth: Atheros AR30xx firmware driver ver 1.0
[ 3.599376] usbcore: registered new interface driver ath3k
[ 3.605278] usbcore: registered new interface driver snd-usb-audio
[ 3.611040] No device for DAI aml-dai0
[ 3.614910] ***Entered sound/soc/aml/aml_m3.c:aml_m3_audio_probe
[ 3.620955] ***Entered sound/soc/aml/aml_m3_codec.c:aml_m3_register
[ 3.626918]
[ 3.626924] SD/MMC initialization started......
[ 3.632909] usb 2-1: new high speed USB device using dwc_otg and address 2
[ 3.736576] HDMI irq 1
[ 3.736593] hpd rising
[ 3.791608] hdmi_task_handle
[ 3.843789] hub 2-1:1.0: USB hub found
[ 3.844189] hub 2-1:1.0: 4 ports detected
[ 4.071705] begin SDIO check ......
[ 4.119876] SEND OP timeout @1
[ 4.120097] begin SD&SDHC check ......
[ 4.131932] set type to SDHC
[ 4.271848] aml-pcm 0:preallocate_dma_buffer: area=ffc24000, addr=a7240000, size=65536
[ 4.274747] iec958 -3977216: preallocate dma buffer start=00040000, size=c09924b4
[ 4.282003] aml-pcm 1:preallocate_dma_buffer: area=ffc75000, addr=a7260000, size=65536
[ 4.289544] asoc: AML-M3 <-> aml-dai0 mapping ok
[ 4.294268] ***Entered sound/soc/aml/aml_m3.c:aml_m3_codec_init:
[ 4.300173] dapm: AML_M3_CODEC: configuring unknown pin LINPUT1
[ 4.306160] dapm: AML_M3_CODEC: configuring unknown pin RINPUT1
[ 4.311912] dapm: AML_M3_CODEC: configuring unknown pin HP MIC
[ 4.317685] dapm: AML_M3_CODEC: configuring unknown pin FM IN
[ 4.324172] HDMI: EDID Ready
[ 4.326281] CEC: Physical address: 1.0.0.0
[ 4.330706] input: AML-M3 hp_switch as /devices/platform/soc-audio/sound/card0/input4
[ 4.338759] Actual delay time in sd_voltage_validation() = 100 ms
[ 4.344241] Change from 2 to SD
[ 4.347307] S18A : 0
[ 4.350064] ALSA device list:
[ 4.352486] #0: AML-M3 (AML_M3_CODEC)
[ 4.356573] Netfilter messages via NETLINK v0.30.
[ 4.360949] nf_conntrack version 0.5.0 (13872 buckets, 55488 max)
[ 4.367833] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 4.374382] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 4.382236] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 4.388854] ctnetlink v0.93: registering with nfnetlink.
[ 4.393874] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 4.400576] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 4.406611] xt_time: kernel timezone is -0000
[ 4.412144] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.416099] arp_tables: (C) 2002 David S. Miller
[ 4.420645] TCP cubic registered
[ 4.424467] Got RCA = 43690
[ 4.427099] NET: Registered protocol family 10
[ 4.431003]
[ 4.431008] ***********CID*************
[ 4.436313] 03:53:44:53:55:30:32:47:80:00:86:47:da:00:9b:00:
[ 4.441737] MID[8]=3
[ 4.444052] OID[16]=SD
[ 4.446391] PNM[40]=SU02G
[ 4.448988] PRV[8]=128
[ 4.451327] PSN[32]=0xda478600
[ 4.454490] Reserved[4]=0
[ 4.456969] year[8].month[4]=2009.11
[ 4.460518] NotUsed[1]=0
[ 4.463038] CRC[7]=0
[ 4.463042]
[ 4.469146] IPv6 over IPv4 tunneling driver
[ 4.472471] NET: Registered protocol family 17
[ 4.475288] NET: Registered protocol family 15
[ 4.479927] Bridge firewalling registered
[ 4.483855] CEC: poll online logic device: 0x4 BOOL: 0
[ 4.488757] CEC: Set logical address: 4
[ 4.492647] Bluetooth: L2CAP ver 2.14
[ 4.496197] Bluetooth: L2CAP socket layer initialized
[ 4.501224] Bluetooth: SCO (Voice Link) ver 0.6
[ 4.505751] Bluetooth: SCO socket layer initialized
[ 4.510773] CEC: CEC task process
[ 4.514124]
[ 4.514131] ********** CSD v1 **************
[ 4.519582] 00:26:00:32:5f:5a:83:ae:fe:fb:cf:ff:92:80:40:00:
[ 4.525035] CSD_STRUCTURE[2]=0
[ 4.528241] MMC_SPEC_VERS[4]=0
[ 4.531271] Reserved1[2]=0
[ 4.533971] TAAC[8]=38
[ 4.536295] NSAC[8]=0
[ 4.538547] TRAN_SPEED[8]=50
[ 4.541405] CCC[8+4]=1525
[ 4.544128] READ_BL_LEN[4]=10
[ 4.546949] C_SIZE_high[2]=3
[ 4.549806] Reserved2[2]=0
[ 4.552504] READ_BL_PARTIAL[1]=1
[ 4.555696] WRITE_BLK_MISALIGN[1]=0
[ 4.559160] READ_BLK_MISALIGN[1]=0
[ 4.562549] DSR_IMP[1]=0
[ 4.565051] Reserved2[2]=0
[ 4.567735] C_SIZE[2+8+2]=3771
[ 4.570767] VDD_R_CURR_MIN[3]=7
[ 4.574007] VDD_R_CURR_MAX[3]=6
[ 4.577003] VDD_W_CURR_MIN[3]=7
[ 4.580121] VDD_W_CURR_MAX[3]=6
[ 4.583249] C_SIZE_MULT[2+1]=7
[ 4.586271] ERASE_BLK_EN[1]=1
[ 4.589215] SECTOR_SIZE[6+1]=31
[ 4.592343] WP_GRP_SIZE[7]=127
[ 4.595365] Reserved3[2]=0
[ 4.598050] R2W_FACTOR[3]=4
[ 4.600821] WRITE_BL_LEN[2+2]=10
[ 4.604148] WRITE_BL_PARTIAL[1]=0
[ 4.607318] Reserved4[5]=0
[ 4.610003] WP_GRP_ENABLE[1]=1
[ 4.613044] FILE_FORMAT_GRP[1]=0
[ 4.616239] COPY[1]=1
[ 4.618490] PERM_WRITE_PROTECT[1]=0
[ 4.621965] TMP_WRITE_PROTECT[1]=0
[ 4.625333] FILE_FORMAT[2]=0
[ 4.628191] Reserved5[2]=0
[ 4.630876] CRC[7]=0
[ 4.633164] NotUsed[1]=0
[ 4.633167]
[ 4.637065] CEC: poll online logic device: 0x4 BOOL: 0
[ 4.642169] CEC: Set logical address: 4
[ 4.646075] Bluetooth: RFCOMM TTY layer initialized
[ 4.650807] Bluetooth: RFCOMM socket layer initialized
[ 4.655948] Bluetooth: RFCOMM ver 1.11
[ 4.659637] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.665046] Bluetooth: BNEP filters: protocol multicast
[ 4.670115] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 4.676081] set mode VIC 16 (cd0,cs0,pm1,vd0,1)
[ 4.680598] param->VIC:16
[ 4.683218] mode is: 8
[ 4.685533] VPU_VIU_VENC_MUX_CTRL: 0xa
[ 4.689253] viu chan = 1
[ 4.691894] VPU_VIU_VENC_MUX_CTRL: 0xa
[ 4.695519] hdmin get brd phy data
[ 4.698868] hdmi phy setting
[ 4.703372] hdmin get brd phy data
[ 4.705104] hdmi phy setting
[ 4.708098] Sink is HDMI device
[ 4.712505] No sink attached
[ 4.714199] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 4.720697] All bugs added by David S. Miller <davem@redhat.com>
[ 4.726920] lib80211: common routines for IEEE802.11 drivers
[ 4.732452] lib80211_crypt: registered algorithm 'NULL'
[ 4.732462] ThumbEE CPU extension supported.
[ 4.736613] enter meson_pm_probe!
[ 4.739856] meson_pm_probe done 0x0 200!
[ 4.743851] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 4.752128] registered taskstats version 1
[ 4.756756] aml_rtc aml_rtc: setting system clock to 1970-01-01 00:00:11 UTC (11)
[ 4.763428] yaffs: dev is 32505858 name is "mtdblock2" rw
[ 4.768248] yaffs: passed flags ""
[ 4.771686] yaffs: Attempting MTD mount of 31.2,"mtdblock2"
[ 4.771817] yaffs2 check point success.
[ 4.783281] yaffs: restored from checkpoint
[ 4.783714] yaffs_read_super: isCheckpointed 1
[ 4.783767] VFS: Mounted root (yaffs2 filesystem) on device 31:2.
[ 4.788844] devtmpfs: mounted
[ 4.788880] init_post.
[ 4.789659] Freeing init memory: 192K
[ 4.793330] run_init_process /sbin/init.
[ 4.813330]
[ 4.813339] ***********SCR*************
[ 4.813361] 02:25:80:00:00:00:00:00:
[ 4.816472] SD_SPEC[4]=2
[ 4.819157] SCR_STRUCTURE[4]=0
[ 4.822219] SD_BUS_WIDTHS[4]=5
[ 4.825220] SD_SECURITY[3]=2
[ 4.828078] DATA_STAT_AFTER_ERASE[1]=0
[ 4.831823] Rsv1[7]=0
[ 4.834056] SD_SPEC3[1]=1
[ 4.836652] CMD_SUPPORT[2]=0
[ 4.839510] Rsv2[6]=0
[ 4.841897] Reserved2[32]=0
[ 4.841900]
[ 4.846054] current VIC: 16
[ 4.848784] audio sample rate: 0
[ 4.852047] PCM out to HDMI
[ 4.866877] Time out: AIU_HDMI_CLK_DATA_CTRL
[ 4.879124] Time out: AIU_HDMI_CLK_DATA_CTRL
[ 4.879142] Enable audio spdif to HDMI
[ 4.881895] HDMI: set audio param
[ 4.928472] #SD_ERROR_SWITCH_FUNCTION_COMUNICATION error occured in sd_switch_funtion()
[ 4.930928] sd_mmc_init() is completed successfully!
[ 4.936038] This SD card is working in Wide Bus and Normal Speed mode!
[ 4.936046]
[ 4.947106] cardblksd: cardblksd1
[ 4.972115] monitor : INSERT
[ 5.178396] save exit: isCheckpointed 1
[ 5.208998] yaffs: dev is 32505859 name is "mtdblock3" rw
[ 5.209024] yaffs: passed flags ""
[ 5.212349] yaffs: Attempting MTD mount of 31.3,"mtdblock3"
[ 5.212492] yaffs2 check point success.
[ 5.216741] yaffs: restored from checkpoint
[ 5.216927] yaffs_read_super: isCheckpointed 1
[ 5.787522] yaffs: dev is 32505861 name is "mtdblock5" rw
[ 5.787557] yaffs: passed flags ""
[ 5.790754] yaffs: Attempting MTD mount of 31.5,"mtdblock5"
[ 5.790886] yaffs2 check point success.
[ 5.801147] yaffs: restored from checkpoint
[ 5.801771] yaffs_read_super: isCheckpointed 1
[ 5.883485] <30>udevd[110]: starting version 173
[ 7.049044] HDMI irq 2
[ 7.049061] hpd falling
[ 7.644269] nftl release flush cache data: 0
[ 7.841687] nftl creat stucture completely free blk: 2 erased blk: 508
[ 7.885871] nftl release flush cache data: 0
[ 7.886059] nftl release flush cache data: 0
[ 7.990178] netdev_open
[ 7.990202] Ethernet reset
[ 7.990218] NET MDA descpter start addr=e64af000
[ 7.995211] write mac add to:e7ebb208: 00 0d fe 59 a0 8e |...Y..|
[ 8.000422] Current DMA mode=0
[ 8.013818] ether leave promisc module
[ 8.013844] ether leave all muticast module
[ 8.016203] set hash low=2,high=0
[ 8.019870] set hash low=2,high=1
[ 8.023923] set hash low=8000002,high=1
[ 9.440486] Mali<2>:
[ 9.440507] Mali<2>: Inserting Mali v9 device driver.
[ 9.442397] Mali<2>: Compiled: Apr 13 2013, time: 08:06:50.
[ 9.447868] Mali<2>: Svn revision:
[ 9.461711] Mali<2>: MMU memory system initializing
[ 9.461747] Mali<2>: Rendercore: subsystem global mutex initialized
[ 9.467281] Mali<2>: Core: subsystem_init: Mali-400 PP
[ 9.472445] Mali<2>: Core: subsystem_init: Mali-400 GP
[ 9.477499] Mali<2>: Mali L2 cache system initializing
[ 9.559151] mali_meson_poweron: Interrupt received.
[ 9.559580] Mali<2>: MMU registered
[ 9.562063] Mali<2>: MMU registered
[ 9.565413] Mali<2>: Mali OS memory allocator created with max allocation size of 0x8000000 bytes, cpu_usage_adjust 0x00000000
[ 9.576822] Mali<2>: Memory Validator 'Framebuffer' installed for Mali physical address base==0x84000000, size==0x06000000, cpu_adjust==0x00000000
[ 9.589981] Mali<2>: Creating Mali L2 cache: Mali-400 L2 cache
[ 9.595710] Mali<1>: Mali memory allocators will be used in this order of preference (lowest numbered first) :
[ 9.605628] Mali<1>: 5: Mali Memory
[ 9.609846] Mali<2>: Attach mmu: 0xe66dec60 to core: Mali-400 PP in subsystem: Mali-400 PP
[ 9.617532] Mali<2>: Attach mmu: 0xe66dec00 to core: Mali-400 GP in subsystem: Mali-400 GP
[ 9.625625] Mali<2>: Mali L2 cache system load complete
[ 9.630834] Mali: Mali device driver loaded
[ 9.635051] Mali<2>: malidrv_build_info
[ 9.727331] warning: `proftpd' uses 32-bit capabilities (legacy support in use)
[ 10.197667] HDMI irq 1
[ 10.197685] hpd rising
[ 10.211974] hdmi_task_handle
[ 10.722475] HDMI: EDID Ready
[ 10.722512] CEC: Physical address: 1.0.0.0
[ 10.905303] vendor_id: 0xe091
[ 11.141717] CEC: poll online logic device: 0x4 BOOL: 1
[ 11.321808] CEC: poll online logic device: 0x8 BOOL: 0
[ 11.321843] CEC: Set logical address: 8
[ 11.325229] set mode VIC 16 (cd0,cs0,pm1,vd0,1)
[ 11.329798] param->VIC:16
[ 11.332427] mode is: 8
[ 11.334734] VPU_VIU_VENC_MUX_CTRL: 0xa
[ 11.338455] viu chan = 1
[ 11.340967] VPU_VIU_VENC_MUX_CTRL: 0xa
[ 11.344732] hdmin get brd phy data
[ 11.348071] hdmi phy setting
[ 11.352699] hdmin get brd phy data
[ 11.354306] hdmi phy setting
[ 11.357301] Sink is HDMI device
[ 11.361679] No sink attached
[ 11.531797] current VIC: 16
[ 11.531815] audio sample rate: 0
[ 11.532302] PCM out to HDMI
[ 11.547166] Time out: AIU_HDMI_CLK_DATA_CTRL
[ 11.559305] Time out: AIU_HDMI_CLK_DATA_CTRL
[ 11.559324] Enable audio spdif to HDMI
[ 11.562198] HDMI: set audio param
[ 12.643397] aml_m3_codec_mute mute=1
[ 12.649066] aml_m3_codec_mute mute=1
[ 12.654674] aml_m3_codec_mute mute=1
[ 12.661005] aml_m3_codec_mute mute=1
[ 12.668805] aml_m3_codec_mute mute=1
[ 13.161208] buf=0
[ 13.161229] IEC958_mode_raw=0
[ 13.172134] ***Entered sound/soc/aml/aml_dai.c:aml_dai_hw_params
[ 13.173140] I2S hw init,i2s mode 0
[ 13.175980] iec958 mode PCM16
[ 13.178923] IEC958 16bit
[ 13.181432] iec958 nodify hdmi audio type 1
[ 13.185784] audio info changed.notify to hdmi: type 1,sr 44100
[ 13.191440] HDMI: aout notify rate 44100
[ 13.195325] HDMI: aout notify format PCM
[ 13.199274] aml_m3_codec_mute mute=0
[ 13.208666] I2S hw init,i2s mode 0
[ 13.208690] iec958 mode PCM16
[ 13.209472] IEC958 16bit
[ 13.212174] iec958 nodify hdmi audio type 1
[ 13.216168] current VIC: 16
[ 13.218910] audio sample rate: 2
[ 13.222175] PCM out to HDMI
[ 13.237053] Time out: AIU_HDMI_CLK_DATA_CTRL
[ 13.249300] Time out: AIU_HDMI_CLK_DATA_CTRL
[ 13.249319] Enable audio spdif to HDMI
[ 13.251813] HDMI Audio Type: PCM
[ 13.255214] HDMI: set audio param
[ 13.258337] aml_m3_codec_mute mute=0
[ 13.284956] ***Entered sound/soc/aml/aml_pcm.c:aml_audio_clock_gating_enable
[ 13.465717] set hash low=8000002,high=10001
[ 16.498257] Mali<2>: MMU session begin
[ 16.498322] Mali<2>: Page directory for session 0xe61015a0 placed at physical address 0xA61C4000
[ 16.509332] Mali<2>: MMU session begin: success
[ 16.509724] Mali<2>: Core: session_begin: for Mali-400 PP
[ 16.515123] Mali<2>: Core: session_begin: for Mali-400 GP
[ 16.539470] tvmode set to 720p
[ 16.539505] TV mode 720p selected.
[ 16.539512] [0x1b7e] = 0xff
[ 16.539842] [0x1b80] = 0x0
[ 16.542729] [0x1b57] = 0x0
[ 16.545211] [0x104f] = 0x40003
[ 16.548239] [0x1058] = 0x40e8
[ 16.551184] [0x107f] = 0x8c0000c3
[ 16.554510] [0x105c] = 0x1043e
[ 16.557509] [0x1066] = 0x10843
[ 16.560538] [0x1bb8] = 0x52
[ 16.563326] [0x1b62] = 0x2029
[ 16.566255] [0x1b8d] = 0x4040
[ 16.569199] [0x1b8e] = 0x19
[ 16.572097] [0x1b94] = 0x288
[ 16.574830] [0x1b95] = 0xc87
[ 16.577688] [0x1b97] = 0xce3
[ 16.580577] ----cec_input_handle_messageOP code----: 0
[ 16.585727] [0x1b98] = 0x50
[ 16.588429] [0x1b99] = 0xf0
[ 16.591200] [0x1b9a] = 0x50
[ 16.593987] [0x1b9b] = 0x2b0
[ 16.596830] [0x1b9c] = 0xcb0
[ 16.599687] [0x1b9d] = 0x4
[ 16.602497] [0x1b9e] = 0x8
[ 16.605057] [0x1ba1] = 0x4
[ 16.607742] [0x1ba2] = 0x8
[ 16.610435] [0x1ba4] = 0x288
[ 16.613299] [0x1ba3] = 0xc87
[ 16.616144] [0x1ba6] = 0x1d
[ 16.618915] [0x1baf] = 0x2ec
[ 16.621784] [0x1ba7] = 0x100
[ 16.624632] [0x1ba8] = 0xa8
[ 16.627403] [0x1ba9] = 0xa8
[ 16.630175] [0x1baa] = 0x100
[ 16.633169] [0x1bab] = 0x0
[ 16.635719] [0x1bac] = 0x5
[ 16.638403] [0x1bae] = 0x2ed
[ 16.641261] [0x1b68] = 0x100
[ 16.644133] [0x1b60] = 0x0
[ 16.646805] [0x1b6e] = 0x200
[ 16.649690] ----cec_input_handle_messageOP code----: 8c
[ 16.654914] [0x1b58] = 0x0
[ 16.657545] [0x1b7e] = 0x0
[ 16.660230] [0x1b64] = 0x9061
[ 16.663298] [0x1b65] = 0xa061
[ 16.666120] [0x1b66] = 0xb061
[ 16.669064] [0x1b78] = 0x1
[ 16.671761] [0x1b79] = 0x1
[ 16.674435] [0x1b7a] = 0x1
[ 16.677119] [0x1b7b] = 0x1
[ 16.679804] [0x1b7c] = 0x1
[ 16.682515] [0x1b7d] = 0x1
[ 16.685176] [0x1bfc] = 0x1000
[ 16.688119] [0x1c0d] = 0x3210
[ 16.691064] [0x1c0e] = 0x54
[ 16.693960] [0x1b57] = 0x0
[ 16.696536] [0x1b80] = 0x1
[ 16.699208] mode is: 6
[ 16.701561] VPU_VIU_VENC_MUX_CTRL: 0xa
[ 16.705268] viu chan = 1
[ 16.707780] VPU_VIU_VENC_MUX_CTRL: 0xa
[ 16.711532] new mode 720p set ok
[ 16.724975] Vsync pts inc(before): 1500
[ 16.724995] Vsync pts inc(after): 1497
[ 16.727007] set mode VIC 4 (cd0,cs0,pm1,vd0,1)
[ 16.731544] param->VIC:4
[ 16.734001] mode is: 6
[ 16.736339] VPU_VIU_VENC_MUX_CTRL: 0xa
[ 16.740061] viu chan = 1
[ 16.742593] VPU_VIU_VENC_MUX_CTRL: 0xa
[ 16.746338] hdmin get brd phy data
[ 16.749687] hdmi phy setting
[ 16.754302] hdmin get brd phy data
[ 16.755912] hdmi phy setting
[ 16.758913] Sink is HDMI device
[ 16.763290] No sink attached
[ 16.765127] osd0 free scale DISABLE
[ 16.768434] osd1 free scale DISABLE
[ 16.796701] video disable try be changed to 0 by xbmc.bin
[ 16.796791] video disable try be changed to 1 by xbmc.bin
[ 16.802171] osd0=>x:0 ,y:0,w:1279,h:719
[ 16.802176] osd1=> x:0,y:0,w:0,h:0
[ 16.821545] current VIC: 4
[ 16.821551] audio sample rate: 2
[ 16.821590] PCM out to HDMI
[ 16.833732] Time out: AIU_HDMI_CLK_DATA_CTRL
[ 16.846007] Time out: AIU_HDMI_CLK_DATA_CTRL
[ 16.846013] Enable audio spdif to HDMI
[ 16.846073] HDMI Audio Type: PCM
[ 16.846348] HDMI: set audio param
[ 16.906208] ----cec_input_handle_messageOP code----: 8c
[ 17.135824] ----cec_input_handle_messageOP code----: 8c
[ 17.365450] ----cec_input_handle_messageOP code----: 8c
[ 17.595065] ----cec_input_handle_messageOP code----: 8c
[ 17.824686] ----cec_input_handle_messageOP code----: 8c
[ 18.054301] ----cec_input_handle_messageOP code----: 8c
[ 18.191738] Headphone unpluged
[ 18.283905] ----cec_input_handle_messageOP code----: 8c
[ 18.513522] ----cec_input_handle_messageOP code----: 8c
[ 18.741528] eth0: no IPv6 routers present
[ 19.563084] vendor_id: 0xe091
[ 20.982280] ----cec_input_handle_messageOP code----: 0
[ 21.017976] ----cec_input_handle_messageOP code----: 0
[ 21.053685] ----cec_input_handle_messageOP code----: 0
[ 21.089375] ----cec_input_handle_messageOP code----: 0
[ 23.272870] aml_m3_codec_mute mute=1
[ 24.846637] Wrong custom code is 0xba45fb04
[ 26.513429] Wrong custom code is 0xbb44fb04
[ 28.255929] Wrong custom code is 0xba45fb04
[ 29.275486] Wrong custom code is 0xbb44fb04
[ 29.720256] Wrong custom code is 0xba45fb04
[ 30.408403] Wrong custom code is 0xf906fb04
[ 33.928843] Wrong custom code is 0xbb44fb04
[ 35.528279] Wrong custom code is 0xf906fb04
[ 36.107891] Wrong custom code is 0xf807fb04
[ 39.456815] ----cec_input_handle_messageOP code----: 0
[ 39.462079] Wrong custom code is 0xf708fb04
[ 39.492511] ----cec_input_handle_messageOP code----: 0
[ 39.528209] ----cec_input_handle_messageOP code----: 0
[ 39.563925] ----cec_input_handle_messageOP code----: 0
[ 39.628422] ----cec_input_handle_messageOP code----: 36
[ 39.628536] CEC: System will be in standby mode
[ 39.889954] ----cec_input_handle_messageOP code----: 36
[ 39.890044] CEC: System will be in standby mode
[ 40.066138] HDMI irq 2
[ 40.066169] hpd falling
[ 40.403573] HDMI irq 1
[ 40.403597] hpd rising
[ 40.511679] hdmi_task_handle
[ 41.030035] HDMI: EDID Ready
[ 41.030084] CEC: Physical address: 1.0.0.0
[ 41.211622] CEC: poll online logic device: 0x4 BOOL: 0
[ 41.211679] CEC: Set logical address: 4
[ 41.215060] set mode VIC 4 (cd0,cs0,pm1,vd0,1)
[ 41.219533] param->VIC:4
[ 41.222082] mode is: 6
[ 41.224385] VPU_VIU_VENC_MUX_CTRL: 0xa
[ 41.228104] viu chan = 1
[ 41.230681] VPU_VIU_VENC_MUX_CTRL: 0xa
[ 41.234542] hdmin get brd phy data
[ 41.237719] hdmi phy setting
[ 41.242254] hdmin get brd phy data
[ 41.243955] hdmi phy setting
[ 41.246973] Sink is HDMI device
[ 41.251309] No sink attached
[ 41.381736] current VIC: 4
[ 41.381761] audio sample rate: 2
[ 41.382162] PCM out to HDMI
[ 41.402443] Time out: AIU_HDMI_CLK_DATA_CTRL
[ 41.420073] Time out: AIU_HDMI_CLK_DATA_CTRL
[ 41.420100] Enable audio spdif to HDMI
[ 41.422595] HDMI Audio Type: PCM
[ 41.426015] HDMI: set audio param
[ 43.739092] Wrong custom code is 0xf708fb04
[ 45.829194] HDMI irq 2
[ 45.829217] hpd falling
[ 49.039874] HDMI irq 1
[ 49.039898] hpd rising
[ 49.131528] hdmi_task_handle
[ 49.642441] HDMI: EDID Ready
[ 49.642492] CEC: Physical address: 1.0.0.0
[ 49.884313] CEC: recevie error[0xf]
[ 51.821638]
[ 51.821653] CEC POLLING TIMEOUT!
[ 51.821699] CEC: poll online logic device: 0x4 BOOL: 0
[ 51.825936] CEC: Set logical address: 4
[ 51.829887] set mode VIC 4 (cd0,cs0,pm1,vd0,1)
[ 51.834308] param->VIC:4
[ 51.836751] mode is: 6
[ 51.839102] VPU_VIU_VENC_MUX_CTRL: 0xa
[ 51.842835] viu chan = 1
[ 51.845323] VPU_VIU_VENC_MUX_CTRL: 0xa
[ 51.849080] hdmin get brd phy data
[ 51.852558] hdmi phy setting
[ 51.856951] hdmin get brd phy data
[ 51.858661] hdmi phy setting
[ 51.861694] Sink is HDMI device
[ 51.866034] No sink attached
[ 51.981609] current VIC: 4
[ 51.981634] audio sample rate: 2
[ 51.982031] PCM out to HDMI
[ 52.002429] Time out: AIU_HDMI_CLK_DATA_CTRL
[ 52.019930] Time out: AIU_HDMI_CLK_DATA_CTRL
[ 52.019956] Enable audio spdif to HDMI
[ 52.022505] HDMI Audio Type: PCM
[ 52.025878] HDMI: set audio param
[ 52.467064] ----cec_input_handle_messageOP code----: 0
[ 52.502753] ----cec_input_handle_messageOP code----: 0
[ 52.538457] ----cec_input_handle_messageOP code----: 0
[ 52.574156] ----cec_input_handle_messageOP code----: 0
[ 52.644285] ----cec_input_handle_messageOP code----: 0
[ 52.679992] ----cec_input_handle_messageOP code----: 0
[ 52.715697] ----cec_input_handle_messageOP code----: 0
[ 52.751388] ----cec_input_handle_messageOP code----: 0
[ 52.822528] ----cec_input_handle_messageOP code----: 0
[ 52.858223] ----cec_input_handle_messageOP code----: 0
[ 52.893936] ----cec_input_handle_messageOP code----: 0
[ 52.929626] ----cec_input_handle_messageOP code----: 0
[ 56.673500] vendor_id: 0xe091
[ 57.187901] Wrong custom code is 0xbe41fb04
[ 57.386363] ----cec_input_handle_messageOP code----: 0
[ 57.422066] ----cec_input_handle_messageOP code----: 0
[ 57.457766] ----cec_input_handle_messageOP code----: 0
[ 57.493462] ----cec_input_handle_messageOP code----: 0
[ 57.680908] Wrong custom code is 0xbe41fb04
[ 58.162378] Wrong custom code is 0xbf40fb04
[ 58.849767] Wrong custom code is 0xf807fb04
[ 59.361748] Wrong custom code is 0xf906fb04
[ 61.881909] fcode map = 0 press ircode = 0x41, scancode = 0x000e
[ 62.151598] fcode map = 0 release ircode = 0x41, scancode = 0x000e
[ 63.198769] Wrong custom code is 0xf906fb04
[ 63.852433] Wrong custom code is 0xf807fb04
[ 65.079552] Wrong custom code is 0xba45fb04
[ 66.006426] Wrong custom code is 0xba45fb04
[ 67.181639] Wrong custom code is 0x817efb04
[ 68.649481] Wrong custom code is 0x817efb04
[ 69.689627] Wrong custom code is 0xf906fb04
[ 70.341120] Wrong custom code is 0xf807fb04
[ 71.772100] Wrong custom code is 0xdf20fb04
[ 72.371266] Wrong custom code is 0xde21fb04
[ 72.847427] Wrong custom code is 0xc639fb04
[ 73.316447] Wrong custom code is 0x42bdfb04
[ 73.983138] Wrong custom code is 0xdf20fb04
[ 74.707277] ----cec_input_handle_messageOP code----: 0
[ 74.714744] Wrong custom code is 0x8d72fb04
[ 74.742973] ----cec_input_handle_messageOP code----: 0
[ 74.778676] ----cec_input_handle_messageOP code----: 0
[ 74.814374] ----cec_input_handle_messageOP code----: 0
[ 75.174991] Wrong custom code is 0x8e71fb04
[ 75.726203] Wrong custom code is 0x9c63fb04
[ 76.198244] Wrong custom code is 0x9e61fb04
[ 79.880932] Wrong custom code is 0xbe41fb04
[ 80.381634] Wrong custom code is 0xbf40fb04
[ 80.830968] Wrong custom code is 0xbb44fb04
[ 81.401678] Wrong custom code is 0xf807fb04
[ 82.002992] Wrong custom code is 0xbb44fb04
[ 83.927264] Wrong custom code is 0xf708fb04
[ 84.026870] ----cec_input_handle_messageOP code----: 36
[ 84.026983] CEC: System will be in standby mode
[ 84.291059] ----cec_input_handle_messageOP code----: 36
[ 84.291142] CEC: System will be in standby mode
[ 84.467246] HDMI irq 2
[ 84.467271] hpd falling
[ 84.797504] HDMI irq 1
[ 84.797536] hpd rising
[ 84.811513] hdmi_task_handle
[ 85.322387] HDMI: EDID Ready
[ 85.322444] CEC: Physical address: 1.0.0.0
[ 85.501600] CEC: poll online logic device: 0x4 BOOL: 0
[ 85.501645] CEC: Set logical address: 4
[ 85.505043] set mode VIC 4 (cd0,cs0,pm1,vd0,1)
[ 85.509514] param->VIC:4
[ 85.512198] mode is: 6
[ 85.514364] VPU_VIU_VENC_MUX_CTRL: 0xa
[ 85.518083] viu chan = 1
[ 85.520595] VPU_VIU_VENC_MUX_CTRL: 0xa
[ 85.524385] hdmin get brd phy data
[ 85.527699] hdmi phy setting
[ 85.532231] hdmin get brd phy data
[ 85.533934] hdmi phy setting
[ 85.536945] Sink is HDMI device
[ 85.541294] No sink attached
[ 85.671679] current VIC: 4
[ 85.671704] audio sample rate: 2
[ 85.672088] PCM out to HDMI
[ 85.692462] Time out: AIU_HDMI_CLK_DATA_CTRL
[ 85.709990] Time out: AIU_HDMI_CLK_DATA_CTRL
[ 85.710017] Enable audio spdif to HDMI
[ 85.712516] HDMI Audio Type: PCM
[ 85.715939] HDMI: set audio param
[ 90.435559] Wrong custom code is 0xf708fb04
[ 92.517980] HDMI irq 2
[ 92.518004] hpd falling
[ 95.735696] HDMI irq 1
[ 95.735720] hpd rising
[ 95.841538] hdmi_task_handle
[ 96.352483] HDMI: EDID Ready
[ 96.352540] CEC: Physical address: 1.0.0.0
[ 96.600133] CEC: recevie error[0xf]
[ 98.531634]
[ 98.531648] CEC POLLING TIMEOUT!
[ 98.531693] CEC: poll online logic device: 0x4 BOOL: 0
[ 98.535925] CEC: Set logical address: 4
[ 98.539752] set mode VIC 4 (cd0,cs0,pm1,vd0,1)
[ 98.544270] param->VIC:4
[ 98.546743] mode is: 6
[ 98.549082] VPU_VIU_VENC_MUX_CTRL: 0xa
[ 98.552843] viu chan = 1
[ 98.555325] VPU_VIU_VENC_MUX_CTRL: 0xa
[ 98.559070] hdmin get brd phy data
[ 98.562555] hdmi phy setting
[ 98.566941] hdmin get brd phy data
[ 98.568654] hdmi phy setting
[ 98.571686] Sink is HDMI device
[ 98.576005] No sink attached
[ 98.701639] current VIC: 4
[ 98.701673] audio sample rate: 2
[ 98.702056] PCM out to HDMI
[ 98.722444] Time out: AIU_HDMI_CLK_DATA_CTRL
[ 98.739959] Time out: AIU_HDMI_CLK_DATA_CTRL
[ 98.739987] Enable audio spdif to HDMI
[ 98.742598] HDMI Audio Type: PCM
[ 98.745911] HDMI: set audio param
[ 99.182845] ----cec_input_handle_messageOP code----: 0
[ 99.218560] ----cec_input_handle_messageOP code----: 0
[ 99.254248] ----cec_input_handle_messageOP code----: 0
[ 99.289954] ----cec_input_handle_messageOP code----: 0
[ 99.360065] ----cec_input_handle_messageOP code----: 0
[ 99.395765] ----cec_input_handle_messageOP code----: 0
[ 99.431463] ----cec_input_handle_messageOP code----: 0
[ 99.467169] ----cec_input_handle_messageOP code----: 0
[ 99.538312] ----cec_input_handle_messageOP code----: 0
[ 99.574001] ----cec_input_handle_messageOP code----: 0
[ 99.609708] ----cec_input_handle_messageOP code----: 0
[ 99.645403] ----cec_input_handle_messageOP code----: 0
[ 103.375625] vendor_id: 0xe091
[ 104.087993] ----cec_input_handle_messageOP code----: 0
[ 104.123695] ----cec_input_handle_messageOP code----: 0
[ 104.159394] ----cec_input_handle_messageOP code----: 0
[ 104.195090] ----cec_input_handle_messageOP code----: 0
[ 105.970720] fcode map = 0 press ircode = 0x41, scancode = 0x000e
[ 106.241584] fcode map = 0 release ircode = 0x41, scancode = 0x000e
[ 108.022271] Wrong custom code is 0xf807fb04
[ 108.607835] Wrong custom code is 0xf906fb04
[ 109.091357] Wrong custom code is 0xbe41fb04
[ 109.248551] Wrong custom code is 0xf807fb04
[ 109.581709] Wrong custom code is 0xf807fb04
[ 109.984815] Wrong custom code is 0xf906fb04
[ 110.332138] Wrong custom code is 0xbb44fb04
[ 110.774086] Wrong custom code is 0xbf40fb04
[ 111.327354] Wrong custom code is 0xbe41fb04
[ 112.233522] Wrong custom code is 0xbb44fb04
[ 112.770594] Wrong custom code is 0xf906fb04
[ 113.216988] Wrong custom code is 0xf906fb04
[ 113.550251] Wrong custom code is 0xbe41fb04
[ 115.334873] Wrong custom code is 0x817efb04
[ 119.167778] Wrong custom code is 0x817efb04
[ 121.517911] ----cec_input_handle_messageOP code----: 0
[ 121.553614] ----cec_input_handle_messageOP code----: 0
[ 121.589330] ----cec_input_handle_messageOP code----: 0
[ 121.625014] ----cec_input_handle_messageOP code----: 0
[ 138.443324] ----cec_input_handle_messageOP code----: 0
[ 138.479010] ----cec_input_handle_messageOP code----: 0
[ 138.514715] ----cec_input_handle_messageOP code----: 0
[ 138.550437] ----cec_input_handle_messageOP code----: 0
[ 155.369307] ----cec_input_handle_messageOP code----: 0
[ 155.405005] ----cec_input_handle_messageOP code----: 0
[ 155.440709] ----cec_input_handle_messageOP code----: 0
[ 155.476405] ----cec_input_handle_messageOP code----: 0
[ 172.296728] ----cec_input_handle_messageOP code----: 0
[ 172.332433] ----cec_input_handle_messageOP code----: 0
[ 172.368132] ----cec_input_handle_messageOP code----: 0
[ 172.403836] ----cec_input_handle_messageOP code----: 0
[ 189.230605] ----cec_input_handle_messageOP code----: 0
[ 189.266311] ----cec_input_handle_messageOP code----: 0
[ 189.302000] ----cec_input_handle_messageOP code----: 0
[ 189.337707] ----cec_input_handle_messageOP code----: 0
[ 206.161486] ----cec_input_handle_messageOP code----: 0
[ 206.278553] ----cec_input_handle_messageOP code----: 8c
[ 206.508158] ----cec_input_handle_messageOP code----: 8c
[ 206.737774] ----cec_input_handle_messageOP code----: 8c
[ 206.967392] ----cec_input_handle_messageOP code----: 8c
[ 207.197016] ----cec_input_handle_messageOP code----: 8c
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment