Created
June 13, 2013 16:54
-
-
Save vDorst/5775379 to your computer and use it in GitHub Desktop.
Bootlog commit 207f9da862e07cca8bd6d3a97dc4c8c79f318228.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 0.000000@0] Initializing cgroup subsys cpu | |
[ 0.000000@0] Linux version 3.0.50+ (root@Thirsty) (gcc version 4.7.3 20130205 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.02-01-20130221 - Linaro GCC 2013.02) ) #157 SMP Thu Jun 13 18:01:33 CEST 2013 | |
[ 0.000000@0] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d | |
[ 0.000000@0] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
[ 0.000000@0] Machine: Amlogic Meson6 G02 reference board | |
[ 0.000000@0] Ignoring unrecognised tag 0x00000000 | |
[ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc | |
[ 0.000000@0] On node 0 totalpages: 196608 | |
[ 0.000000@0] free_area_init_node: node 0, pgdat c07de5a0, node_mem_map c0967000 | |
[ 0.000000@0] Normal zone: 1280 pages used for memmap | |
[ 0.000000@0] Normal zone: 0 pages reserved | |
[ 0.000000@0] Normal zone: 97024 pages, LIFO batch:31 | |
[ 0.000000@0] HighMem zone: 768 pages used for memmap | |
[ 0.000000@0] HighMem zone: 97536 pages, LIFO batch:31 | |
[ 0.000000@0] PERCPU: Embedded 7 pages/cpu @c1173000 s5056 r8192 d15424 u32768 | |
[ 0.000000@0] pcpu-alloc: s5056 r8192 d15424 u32768 alloc=8*4096 | |
[ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 | |
[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194560 | |
[ 0.000000@0] Kernel command line: console=ttyS0,115200n8 rw mem=1024M rootwait nohlt a9_clk=800M clk81=187500000 root=/dev/nfs nfsroot=192.168.10.250:/var/lib/tftpboot/nfs ip=dhcp init=/sbin/init hdmitx=true mac=00:0d:fe:59:a0:8e | |
[ 0.000000@0] HDMI DEBUG: hdmitx_boot_para_setup [1834] | |
[ 0.000000@0] ******** uboot setup mac-addr: 0:d:fe:59:a0:8e | |
[ 0.000000@0] PID hash table entries: 2048 (order: 1, 8192 bytes) | |
[ 0.000000@0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) | |
[ 0.000000@0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) | |
[ 0.000000@0] Memory: 64MB 192MB 512MB = 768MB total | |
[ 0.000000@0] Memory: 770108k/770108k available, 16324k reserved, 393216K highmem | |
[ 0.000000@0] Virtual kernel memory layout: | |
[ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
[ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) | |
[ 0.000000@0] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) | |
[ 0.000000@0] vmalloc : 0xe8800000 - 0xf0000000 ( 120 MB) | |
[ 0.000000@0] lowmem : 0xc0000000 - 0xe8000000 ( 640 MB) | |
[ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
[ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
[ 0.000000@0] .init : 0xc0008000 - 0xc0034000 ( 176 kB) | |
[ 0.000000@0] .text : 0xc0034000 - 0xc078b000 (7516 kB) | |
[ 0.000000@0] .data : 0xc078c000 - 0xc07df0a0 ( 333 kB) | |
[ 0.000000@0] .bss : 0xc07df0c4 - 0xc096691c (1567 kB) | |
[ 0.000000@0] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
[ 0.000000@0] Hierarchical RCU implementation. | |
[ 0.000000@0] RCU debugfs-based tracing is enabled. | |
[ 0.000000@0] NR_IRQS:256 | |
[ 0.000000@0] gic_init: irq_offset=0 | |
[ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms | |
[ 0.000000@0] MESON TIMER-A c079d380 | |
[ 0.000000@0] Disable timerA | |
[ 0.000000@0] Console: colour dummy device 80x30 | |
[ 0.000000@0] console [ttyS0] enabled | |
[ 0.242065@0] Calibrating delay loop... 2387.14 BogoMIPS (lpj=11935744) | |
[ 0.300046@0] pid_max: default: 32768 minimum: 301 | |
[ 0.302292@0] Mount-cache hash table entries: 512 | |
[ 0.307536@0] Initializing cgroup subsys cpuacct | |
[ 0.311409@0] Initializing cgroup subsys freezer | |
[ 0.315983@0] CPU: Testing write buffer coherency: ok | |
[ 0.321156@0] MESON TIMER-B c079d440 | |
[ 0.324523@0] Disable timerA | |
[ 0.327379@0] Disable timerB | |
[ 0.330250@0] Disable timerA | |
[ 0.333227@0] L310 cache controller enabled | |
[ 0.337275@0] l2x0: 8 ways, CACHE_ID 0x4100a0c8, AUX_CTRL 0x7e462c01, Cache size: 524288 B | |
[ 0.345569@0] prefetch=0x71000006 | |
[ 0.348904@0] ===actlr=0x41 | |
[ 0.351686@0] ===actlr=0x4b | |
[ 0.354458@0] SCU_CTRL: scu_ctrl=0x9 | |
[ 0.358018@0] pl310: aux=0x7e462c01, prefetch=0x71000006 | |
[ 0.364087@1] CPU1: Booted secondary processor | |
[ 0.421184@1] MESON TIMER-D c079d5c0 | |
[ 0.421242@0] Brought up 2 CPUs | |
[ 0.421252@0] SMP: Total of 2 processors activated (4780.85 BogoMIPS). | |
[ 0.433181@1] Disable timerD | |
[ 0.436222@0] devtmpfs: initialized | |
[ 0.443340@0] clkrate [ xtal ] : 24000000 | |
[ 0.443509@0] clkrate [ pll_sys ] : 1200000000 | |
[ 0.447936@0] clkrate [ pll_fixed ] : 2000000000 | |
[ 0.452555@0] clkrate [ pll_vid2 ] : 378000000 | |
[ 0.456962@0] clkrate [ pll_hpll ] : 378000000 | |
[ 0.461461@0] clkrate [ pll_ddr ] : 504000000 | |
[ 0.465729@0] clkrate [ a9_clk ] : 1200000000 | |
[ 0.470134@0] clkrate [ clk81 ] : 200000000 | |
[ 0.474337@0] clkrate [ usb0 ] : 0 | |
[ 0.477717@0] clkrate [ usb1 ] : 0 | |
[ 0.481839@0] NET: Registered protocol family 16 | |
[ 0.486576@0] PSU: Enable.GPIOD_5: High. | |
[ 0.489339@0] ****** aml_eth_pinmux_setup() ****** | |
[ 0.494301@0] ****** aml_eth_clock_enable() ****** | |
[ 0.499058@0] ****** aml_eth_reset() ****** | |
[ 0.531170@0] register lm device 0 | |
[ 0.531321@0] register lm device 1 | |
[ 0.534560@0] usb_wifi_power On | |
[ 0.535441@0] aml_i2c_init | |
[ 0.538249@0] chip version=ffffffff | |
[ 0.541726@0] vdac_switch_init_module | |
[ 0.545349@0] tv_init_module | |
[ 0.548116@0] major number 254 for disp | |
[ 0.552027@0] vout_register_server | |
[ 0.555401@0] register tv module server ok | |
[ 0.559749@0] drivers/amlogic/i2c/aml_i2c.c : aml_i2c_init | |
[ 0.565151@0] drivers/amlogic/i2c/aml_i2c.c : aml_i2c_probe | |
[ 0.570680@0] master_no = 0, resource = c079f5e8, maseter_regs=f1108500 | |
[ 0.577425@0] aml-i2c aml-i2c.0: add adapter aml_i2c_adap0(e7811028) | |
[ 0.583622@0] aml-i2c aml-i2c.0: aml i2c bus driver. | |
[ 0.588659@0] drivers/amlogic/i2c/aml_i2c.c : aml_i2c_probe | |
[ 0.594128@0] master_no = 1, resource = c079f640, maseter_regs=f11087c0 | |
[ 0.600830@0] aml-i2c aml-i2c.1: add adapter aml_i2c_adap1(e7811828) | |
[ 0.607059@0] aml-i2c aml-i2c.1: aml i2c bus driver. | |
[ 0.612100@0] drivers/amlogic/i2c/aml_i2c.c : aml_i2c_probe | |
[ 0.617551@0] master_no = 2, resource = c079f698, maseter_regs=f3100500 | |
[ 0.624259@0] aml-i2c aml-i2c.2: add adapter aml_i2c_adap2(e7812028) | |
[ 0.630483@0] aml-i2c aml-i2c.2: aml i2c bus driver. | |
[ 0.635613@0] HDMI DEBUG: amhdmitx_init [1735] | |
[ 0.639882@0] HDMI DEBUG: amhdmitx_probe [1545] | |
[ 0.644693@1] Set HDMI:Chip C | |
[ 0.644714@0] HDMI: get hdmi platform data | |
[ 0.644720@0] HDMI 5V Power On | |
[ 0.654465@1] HDMI DEBUG: HDMITX_M1B_Init [3317] | |
[ 0.659042@1] HDMI DEBUG: HDMITX_M1B_Init [3320] | |
[ 0.663646@1] HDMI DEBUG: hdmi_hw_init [1221] | |
[ 0.667988@1] HDMI: get brd phy data | |
[ 0.671542@1] hdmi phy setting | |
[ 0.674638@1] HDMI: get brd phy data | |
[ 0.678135@1] hdmi phy setting | |
[ 0.681919@1] HDMI: reset intr mask | |
[ 0.685924@0] ------------[ cut here ]------------ | |
[ 0.689433@0] WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0x90/0xc4() | |
[ 0.695943@0] sysfs: cannot create duplicate filename '/module/hdmitx/version' | |
[ 0.703139@0] Modules linked in: | |
[ 0.706345@0] Backtrace: | |
[ 0.708966@0] [<c003de58>] (dump_backtrace+0x0/0x10c) from [<c05a1f68>] (dump_stack+0x18/0x1c) | |
[ 0.711202@1] HDMI DEBUG: hdmi_task_handle [1216] | |
[ 0.722241@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc | |
[ 0.727706@0] HDMI irq 1 | |
[ 0.730219@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c | |
[ 0.735867@0] r6:c0126740 r5:00000009 r4:e7843e98 r3:c07a0e24 | |
[ 0.741682@0] [<c05a1f50>] (dump_stack+0x0/0x1c) from [<c005e6dc>] (warn_slowpath_common+0x54/0x6c) | |
[ 0.750705@0] [<c005e688>] (warn_slowpath_common+0x0/0x6c) from [<c005e798>] (warn_slowpath_fmt+0x38/0x40) | |
[ 0.760341@0] r8:00000000 r7:e7822000 r6:e78b2c60 r5:e7822000 r4:ffffffef | |
[ 0.767018@0] r3:00000009 | |
[ 0.769801@0] [<c005e760>] (warn_slowpath_fmt+0x0/0x40) from [<c0126740>] (sysfs_add_one+0x90/0xc4) | |
[ 0.778830@0] r3:e7822000 r2:c06ef384 | |
[ 0.782564@0] [<c01266b0>] (sysfs_add_one+0x0/0xc4) from [<c0125754>] (sysfs_add_file_mode+0x4c/0xa4) | |
[ 0.791762@0] r7:c078a8ec r6:e78b2c00 r5:c07c32b0 r4:e78b2c60 | |
[ 0.797579@0] [<c0125708>] (sysfs_add_file_mode+0x0/0xa4) from [<c01257c0>] (sysfs_add_file+0x14/0x18) | |
[ 0.806865@0] r6:c07c32b0 r5:e78aca80 r4:c078a8e0 | |
[ 0.811639@0] [<c01257ac>] (sysfs_add_file+0x0/0x18) from [<c01258bc>] (sysfs_create_file+0x30/0x44) | |
[ 0.820757@0] [<c012588c>] (sysfs_create_file+0x0/0x44) from [<c0010324>] (param_sysfs_init+0x78/0x1c0) | |
[ 0.830136@0] [<c00102ac>] (param_sysfs_init+0x0/0x1c0) from [<c003473c>] (do_one_initcall+0x128/0x1a8) | |
[ 0.839508@0] [<c0034614>] (do_one_initcall+0x0/0x1a8) from [<c0008a28>] (kernel_init+0xa4/0x148) | |
[ 0.848366@0] [<c0008984>] (kernel_init+0x0/0x148) from [<c0061fd4>] (do_exit+0x0/0x6e8) | |
[ 0.856429@0] r5:c0008984 r4:00000000 | |
[ 0.860168@0] ---[ end trace 1b75b31a2719ed1c ]--- | |
[ 0.906149@0] bio: create slab <bio-0> at 0 | |
[ 0.907012@0] SCSI subsystem initialized | |
[ 0.908821@0] usbcore: registered new interface driver usbfs | |
[ 0.914399@0] usbcore: registered new interface driver hub | |
[ 0.919841@0] usbcore: registered new device driver usb | |
[ 0.928909@0] Advanced Linux Sound Architecture Driver Version 1.0.24. | |
[ 0.932896@0] Switching to clocksource Timer-E | |
[ 0.935888@0] cfg80211: Calling CRDA to update world regulatory domain | |
[ 0.936094@1] FS-Cache: Loaded | |
[ 0.941232@1] Switched to NOHz mode on CPU #1 | |
[ 0.947885@1] NET: Registered protocol family 2 | |
[ 0.947996@1] IP route cache hash table entries: 16384 (order: 4, 65536 bytes) | |
[ 0.948357@1] TCP established hash table entries: 65536 (order: 7, 524288 bytes) | |
[ 0.949079@1] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) | |
[ 0.950331@1] TCP: Hash tables configured (established 65536 bind 65536) | |
[ 0.950340@1] TCP reno registered | |
[ 0.950358@1] UDP hash table entries: 256 (order: 1, 12288 bytes) | |
[ 0.950381@1] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes) | |
[ 0.950733@1] NET: Registered protocol family 1 | |
[ 0.951087@1] RPC: Registered named UNIX socket transport module. | |
[ 0.951096@1] RPC: Registered udp transport module. | |
[ 0.951101@1] RPC: Registered tcp transport module. | |
[ 0.951106@1] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 0.952590@1] highmem bounce pool size: 64 pages | |
[ 0.952940@1] ashmem: initialized | |
[ 0.964638@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 0.965226@1] Registering the id_resolver key type | |
[ 0.965276@1] FS-Cache: Netfs 'nfs' registered for caching | |
[ 0.966214@1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
[ 0.966755@1] NTFS driver 2.1.30 [Flags: R/W]. | |
[ 0.967483@1] fuse init (API version 7.16) | |
[ 0.968639@1] yaffs: yaffs built Jun 13 2013 14:18:40 Installing. | |
[ 0.968682@1] msgmni has been set to 736 | |
[ 0.969719@1] io scheduler noop registered | |
[ 0.969726@1] io scheduler deadline registered (default) | |
[ 1.077977@0] Switched to NOHz mode on CPU #0 | |
[ 1.231922@1] loop: module loaded | |
[ 1.234149@1] Initializing USB Mass Storage driver... | |
[ 1.234751@1] usbcore: registered new interface driver usb-storage | |
[ 1.240832@1] USB Mass Storage support registered. | |
[ 1.245828@1] usbcore: registered new interface driver usbserial | |
[ 1.251570@1] usbserial: USB Serial Driver core | |
[ 1.256981@1] mousedev: PS/2 mouse device common for all mice | |
[ 1.262586@1] i2c /dev entries driver | |
[ 1.266461@1] cpuidle: using governor ladder | |
[ 1.269697@1] cpuidle: using governor menu | |
[ 1.274123@1] usbcore: registered new interface driver usbhid | |
[ 1.279521@1] usbhid: USB HID core driver | |
[ 1.284186@1] logger: created 256K log 'log_main' | |
[ 1.288596@1] logger: created 256K log 'log_events' | |
[ 1.293336@1] logger: created 256K log 'log_radio' | |
[ 1.298141@1] logger: created 256K log 'log_system' | |
[ 1.302795@1] vout_init_module | |
[ 1.305750@1] start init vout module | |
[ 1.309607@1] create vout attribute ok | |
[ 1.313549@1] ge2d_init | |
[ 1.315893@1] ge2d_dev major:250 | |
[ 1.319703@1] ge2d start monitor | |
[ 1.322526@1] osd_init | |
[ 1.322531@0] ge2d workqueue monitor start | |
[ 1.329039@1] TV mode 720p selected. | |
[ 1.329047@1] [0x1b7e] = 0xff | |
[ 1.331930@1] [0x105f] = 0x0 | |
[ 1.334795@1] [0x109d] = 0x814d3928 | |
[ 1.338282@1] [0x109e] = 0x6b425012 | |
[ 1.341739@1] [0x109f] = 0x110 | |
[ 1.344777@1] [0x109c] = 0x1043e | |
[ 1.347996@1] [0x1066] = 0x10843 | |
[ 1.351200@1] [0x1059] = 0x100 | |
[ 1.354238@1] [0x105f] = 0x80000 | |
[ 1.356202@0] HDMI: EDID Ready | |
[ 1.356256@0] CEC: Physical address: 0x2000 | |
[ 1.356262@0] CEC: Physical address: 2.0.0.0 | |
[ 1.368916@1] [0x105f] = 0x88001 | |
[ 1.372119@1] [0x105f] = 0x80003 | |
[ 1.375330@1] [0x104a] = 0x101 | |
[ 1.378374@1] [0x107f] = 0x8c0000c3 | |
[ 1.381840@1] [0x1bb8] = 0x52 | |
[ 1.384791@1] [0x1b62] = 0x2029 | |
[ 1.387921@1] [0x1b8d] = 0x4040 | |
[ 1.391041@1] [0x1b8e] = 0x19 | |
[ 1.393992@1] [0x1b94] = 0x288 | |
[ 1.397035@1] [0x1b95] = 0xc87 | |
[ 1.400068@1] [0x1b97] = 0xce3 | |
[ 1.403106@1] [0x1b98] = 0x50 | |
[ 1.406063@1] [0x1b99] = 0xf0 | |
[ 1.409009@1] [0x1b9a] = 0x50 | |
[ 1.411960@1] [0x1b9b] = 0x2b0 | |
[ 1.414998@1] [0x1b9c] = 0xcb0 | |
[ 1.418041@1] [0x1b9d] = 0x4 | |
[ 1.420900@1] [0x1b9e] = 0x8 | |
[ 1.423765@1] [0x1ba1] = 0x4 | |
[ 1.426637@1] [0x1ba2] = 0x8 | |
[ 1.429494@1] [0x1ba4] = 0x288 | |
[ 1.432531@1] [0x1ba3] = 0xc87 | |
[ 1.435569@1] [0x1ba6] = 0x1d | |
[ 1.438527@1] [0x1baf] = 0x2ec | |
[ 1.441559@1] [0x1ba7] = 0x100 | |
[ 1.444597@1] [0x1ba8] = 0xa8 | |
[ 1.447553@1] [0x1ba9] = 0xa8 | |
[ 1.450499@1] [0x1baa] = 0x100 | |
[ 1.453537@1] [0x1bab] = 0x0 | |
[ 1.456406@1] [0x1bac] = 0x5 | |
[ 1.459266@1] [0x1bae] = 0x2ed | |
[ 1.462304@1] [0x1b68] = 0x100 | |
[ 1.465342@1] [0x1b60] = 0x0 | |
[ 1.468212@1] [0x1b6e] = 0x200 | |
[ 1.471244@1] [0x1b58] = 0x0 | |
[ 1.474109@1] [0x1b7e] = 0x0 | |
[ 1.476978@1] [0x1b64] = 0x9061 | |
[ 1.480098@1] [0x1b65] = 0xa061 | |
[ 1.483223@1] [0x1b66] = 0xb061 | |
[ 1.486353@1] [0x1b78] = 0x1 | |
[ 1.489212@1] [0x1b79] = 0x1 | |
[ 1.492076@1] [0x1b7a] = 0x1 | |
[ 1.494941@1] [0x1b7b] = 0x1 | |
[ 1.497810@1] [0x1b7c] = 0x1 | |
[ 1.500669@1] [0x1b7d] = 0x1 | |
[ 1.503534@1] [0x271a] = 0xa | |
[ 1.506403@1] [0x1bfc] = 0x1000 | |
[ 1.509523@1] [0x1c0d] = 0x3102 | |
[ 1.512648@1] [0x1c0e] = 0x54 | |
[ 1.515599@1] [0x1b80] = 0x1 | |
[ 1.518468@1] [0x1b57] = 0x0 | |
[ 1.521328@1] tvoutc_setmode[267] | |
[ 1.524627@1] mode is: 6 | |
[ 1.527150@1] VPU_VIU_VENC_MUX_CTRL: 0xa | |
[ 1.531049@1] viu chan = 1 | |
[ 1.533740@1] VPU_VIU_VENC_MUX_CTRL: 0xa | |
[ 1.537666@0] HDMI: get current mode: 720p | |
[ 1.537683@1] [osd0] 0x84100000-0x850fffff | |
[ 1.538209@1] Frame buffer memory assigned at phy:0x84100000, vir:0xe9000000, size=16384K | |
[ 1.538217@1] ---------------clear framebuffer0 memory | |
[ 1.559445@0] set mode VIC 4 (cd0,cs0,pm1,vd0,1) | |
[ 1.559453@0] HDMI DEBUG: hdmi_hw_reset [1394] | |
[ 1.559465@0] HDMI: get brd phy data | |
[ 1.559469@0] hdmi phy setting | |
[ 1.560582@0] HDMI: get brd phy data | |
[ 1.560586@0] hdmi phy setting | |
[ 1.560649@0] HDMI DEBUG: hdmitx_set_pll [2068] | |
[ 1.560654@0] param->VIC:4 | |
[ 1.560659@0] mode is: 6 | |
[ 1.560664@0] VPU_VIU_VENC_MUX_CTRL: 0xa | |
[ 1.560668@0] viu chan = 1 | |
[ 1.560672@0] VPU_VIU_VENC_MUX_CTRL: 0xa | |
[ 1.561691@0] Sink is HDMI device | |
[ 1.561698@0] Source in HDMI Mode | |
[ 1.608586@1] CEC not ready | |
[ 1.633115@0] Console: switching to colour frame buffer device 240x67 | |
[ 1.666378@0] [osd1] 0x85100000-0x860fffff | |
[ 1.666608@0] Frame buffer memory assigned at phy:0x85100000, vir:0xeb000000, size=16384K | |
[ 1.672985@0] ---------------clear framebuffer1 memory | |
[ 1.715898@1] current VIC: 4 | |
[ 1.715918@1] audio sample rate: 0 | |
[ 1.716305@0] osd probe ok | |
[ 1.719469@1] HDMI: reset audio N para | |
[ 1.723209@1] PCM out to HDMI | |
[ 1.735660@1] Time out: AIU_HDMI_CLK_DATA_CTRL | |
[ 1.742419@0] DI: di_init | |
[ 1.742470@0] DI: di_probe | |
[ 1.743342@0] set pinmux c079f894 | |
[ 1.743372@0] set pinmux c079f89c | |
[ 1.747145@1] Time out: AIU_HDMI_CLK_DATA_CTRL | |
[ 1.748909@1] Enable audio spdif to HDMI | |
[ 1.752900@1] HDMI: set audio param | |
[ 1.845959@0] UART_ttyS0:(irq = 122) | |
[ 1.885926@0] UART_ttyS1:(irq = 58) | |
[ 1.886077@0] dwc_otg: version 2.94a 05-DEC-2012 | |
[ 1.888396@0] dwc_otg lm0: dwc_otg_driver_probe(e78cc600) | |
[ 1.888404@0] dwc_otg lm0: start=0xf3240000 | |
[ 2.387645@0] USB (0) use clock source: XTAL input | |
[ 2.388672@0] dwc_otg lm0: base=0xf3240000 | |
[ 2.388679@0] dwc_otg lm0: dwc_otg_device=0xe7a5b600 | |
[ 2.588429@0] Core Release: 2.94a | |
[ 2.588452@0] Setting default values for core params | |
[ 2.591072@0] dwc_otg lm0: DMA config: BURST_DEFAULT | |
[ 2.745891@1] HDMITX: HDCP Key error | |
[ 2.745917@1] HDMITX: HDCP Key error | |
[ 2.990608@0] Using Buffer DMA mode | |
[ 2.990630@0] OTG VER PARAM: 1, OTG VER FLAG: 1 | |
[ 2.992963@0] Working on port type = OTG | |
[ 2.996875@0] Current port type: SLAVE | |
[ 3.000649@0] dwc_otg lm0: DWC OTG Controller | |
[ 3.005022@0] dwc_otg lm0: new USB bus registered, assigned bus number 1 | |
[ 3.011660@0] dwc_otg lm0: irq 62, io mem 0x00000000 | |
[ 3.016631@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
[ 3.023517@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 3.030907@0] usb usb1: Product: DWC OTG Controller | |
[ 3.035757@0] usb usb1: Manufacturer: Linux 3.0.50+ dwc_otg_hcd | |
[ 3.041665@0] usb usb1: SerialNumber: lm0 | |
[ 3.046437@1] hub 1-0:1.0: USB hub found | |
[ 3.049567@1] hub 1-0:1.0: 1 port detected | |
[ 3.053744@1] Dedicated Tx FIFOs mode | |
[ 3.057417@1] using timer detect id change, e7a7d000 | |
[ 3.062253@1] dwc_otg lm1: dwc_otg_driver_probe(e78cc800) | |
[ 3.062260@1] dwc_otg lm1: start=0xf32c0000 | |
[ 3.062267@1] dwc_otg lm1: base=0xf32c0000 | |
[ 3.062273@1] dwc_otg lm1: dwc_otg_device=0xe7387e00 | |
[ 3.165901@0] HOST mode | |
[ 3.262048@1] Core Release: 2.94a | |
[ 3.262069@1] Setting default values for core params | |
[ 3.264684@1] dwc_otg lm1: DMA config: BURST_DEFAULT | |
[ 3.365647@0] Using Buffer DMA mode | |
[ 3.365670@0] OTG VER PARAM: 1, OTG VER FLAG: 1 | |
[ 3.418950@0] Init: Port Power? op_state=1 | |
[ 3.418973@0] Init: Power Port (0) | |
[ 3.664166@1] Using Buffer DMA mode | |
[ 3.664188@1] OTG VER PARAM: 1, OTG VER FLAG: 1 | |
[ 3.666527@1] Working on port type = HOST | |
[ 3.670567@1] dwc_otg lm1: DWC OTG Controller | |
[ 3.674888@1] dwc_otg lm1: new USB bus registered, assigned bus number 2 | |
[ 3.681572@1] dwc_otg lm1: irq 63, io mem 0x00000000 | |
[ 3.685909@0] Indeed it is in host mode hprt0 = 00021501 | |
[ 3.694834@1] Init: Port Power? op_state=1 | |
[ 3.695858@1] Init: Power Port (0) | |
[ 3.699290@1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
[ 3.706199@1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 3.713567@1] usb usb2: Product: DWC OTG Controller | |
[ 3.718434@1] usb usb2: Manufacturer: Linux 3.0.50+ dwc_otg_hcd | |
[ 3.724329@1] usb usb2: SerialNumber: lm1 | |
[ 3.729157@1] hub 2-0:1.0: USB hub found | |
[ 3.732239@1] hub 2-0:1.0: 1 port detected | |
[ 3.736589@1] Amlogic nand flash Kernel driver, Version K1.05.014 (c) 2010 Amlogic Inc. | |
[ 3.744293@1] ####Version of Uboot must be newer than U1.05.011!!!!! | |
[ 3.750770@1] 1 | |
[ 3.752455@1] chip->controller=c093c4e0 | |
[ 3.756313@1] init bus_cycle=17, bus_timing=10, start_cycle=10, end_cycle=10,system=5.0ns | |
[ 3.764858@1] No NAND device found. | |
[ 3.768150@1] NAND device id: 2c 68 4 4a a9 0 | |
[ 3.772335@1] NAND device: Manufacturer ID: 0x2c, Chip ID: 0x2c (Micron C revision NAND 4GiB MT29F32G-C) | |
[ 3.781971@1] #####aml_nand_init, with RB pins and chip->chip_delay:20 | |
[ 3.788317@1] bus_cycle=4, bus_timing=5, start_cycle=5, end_cycle=6,system=5.0ns | |
[ 3.795681@1] oob size is not enough for selected bch mode: NAND_BCH60_1K_MODE force bch to mode: NAND_BCH30_1K_MODE | |
[ 3.806191@1] aml_chip->oob_fill_cnt =0,aml_chip->oob_size =224,bch_bytes =54 | |
[ 3.813303@1] oob layout use nand base oob layout oobsize = 16,oobmul =2,mtd->oobsize =448,aml_chip->oob_size =224 | |
[ 3.838110@1] aml nand env valid addr: 38000 | |
[ 3.838136@1] CONFIG_ENV_SIZE=0x8000; ENV_SIZE=0x7ffc; bbt=0x1330; default_environment_size=0x0 | |
[ 3.855924@0] usb 1-1: new high speed USB device number 2 using dwc_otg | |
[ 3.857133@0] Indeed it is in host mode hprt0 = 00001101 | |
[ 3.863439@1] nand env: nand_env_probe. | |
[ 3.868234@1] NAND bbt detect Bad block at 5a00000 | |
[ 3.871087@1] Creating 6 MTD partitions on "C revision NAND 4GiB MT29F32G-C": | |
[ 3.878212@1] 0x000000800000-0x000000c00000 : "logo" | |
[ 3.884418@1] 0x000000c00000-0x000001400000 : "boot" | |
[ 3.889283@1] 0x000001400000-0x000021400000 : "system" | |
[ 3.893178@1] NAND bbt detect Bad block at 5a00000 | |
[ 3.899358@1] 0x000021400000-0x000040800000 : "cache" | |
[ 3.904314@1] 0x000040800000-0x000053400000 : "backup" | |
[ 3.909457@1] 0x000053400000-0x000100000000 : "userdata" | |
[ 3.914919@1] ethernetinit(dbg[c093c51c]=0) | |
[ 3.917972@1] find phy phy_Identifier=7c0f1 | |
[ 3.921903@1] write mac add to:e739c008: 00 0d fe 59 a0 8e |...Y..| | |
[ 3.928584@1] eth0: mixed no checksumming and other settings. | |
[ 3.934237@1] Amlogic A/V streaming port init | |
[ 3.941668@1] regist mpeg12 codec profile | |
[ 3.942314@1] regist mpeg4 codec profile | |
[ 3.946245@1] amvdec_vc1 module init | |
[ 3.949894@1] regist vc1 codec profile | |
[ 3.953411@1] amvdec_h264 module init | |
[ 3.957231@1] regist h264 codec profile | |
[ 3.960877@1] amvdec_h264mvc module init | |
[ 3.964979@1] regist mjpeg codec profile | |
[ 3.968722@1] amvdec_real module init | |
[ 3.972458@1] regist real codec profile | |
[ 3.977414@1] SARADC Driver init. | |
[ 3.979713@1] Remote Driver | |
[ 3.982583@1] input: aml_keypad as /devices/platform/meson-remote/input/input0 | |
[ 3.990245@1] meson_remote_pinmux_setup() | |
[ 3.993429@1] Remote platform_data g_remote_base=f3100480 | |
[ 3.998822@1] Remote date_valye======0,status == 8915d20 | |
[ 4.004137@1] remote config major:246 | |
[ 4.008373@1] physical address:0xa70b4000 | |
[ 4.011936@1] ADC Keypad Driver init. | |
[ 4.015522@1] chan #4 used for ADC key | |
[ 4.019219@1] power key(116) registed. | |
[ 4.023138@1] input: adc_keypad as /devices/platform/m1-adckp.0/input/input1 | |
[ 4.030399@1] adc keypad register input device completed. | |
[ 4.035446@1] adc keypad major:245 | |
[ 4.039581@1] Meson KeyInput init | |
[ 4.042262@1] Key 116 registed. | |
[ 4.045525@1] input: key_input as /devices/platform/meson-keyinput.0/input/input2 | |
[ 4.053209@1] Meson KeyInput register RTC interrupt | |
[ 4.057297@0] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610 | |
[ 4.057306@0] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
[ 4.057314@0] usb 1-1: Product: USB2.0 Hub | |
[ 4.075951@1] Meson KeyInput major=244 | |
[ 4.076565@0] hub 1-1:1.0: USB hub found | |
[ 4.076888@0] hub 1-1:1.0: 4 ports detected | |
[ 4.078759@0] Indeed it is in host mode hprt0 = 00021501 | |
[ 4.094122@1] spi_nor apollospi:0: mx25l3205d (4096 Kbytes) | |
[ 4.098560@1] Creating 2 MTD partitions on "apollospi:0": | |
[ 4.103927@1] 0x000000000000-0x000000200000 : "bootloader" | |
[ 4.110859@1] 0x00000003e000-0x000000040000 : "ubootenv" | |
[ 4.116495@1] Memory Card media Major: 254 | |
[ 4.118911@1] card max_req_size is 128K | |
[ 4.123303@1] card creat process sucessful | |
[ 4.126935@1] [dsp]DSP start addr 0xc4000000 | |
[ 4.131027@1] [dsp]register dsp to char divece(232) | |
[ 4.139922@1] DSP pcmenc stream buffer to [0xa6401000-0xa6601000] | |
[ 4.141941@1] amlogic audio dsp pcmenc device init! | |
[ 4.147446@1] amlogic audio spdif interface device init! | |
[ 4.153182@1] using rtc device, aml_rtc, for alarms | |
[ 4.156891@1] aml_rtc aml_rtc: rtc core: registered aml_rtc as rtc0 | |
[ 4.164026@1] gpio dev major number:241 | |
[ 4.168099@1] create gpio device success | |
[ 4.171020@1] WDT driver for Amlogic platform initialising. | |
[ 4.177159@1] aml_wdt name is aml_wdt | |
[ 4.180308@1] disable watchdog: aml_wdt | |
[ 4.184127@1] aml_wdt: off, 0ms | |
[ 4.187250@1] total state: off | |
[ 4.190288@1] total time out: 10000 | |
[ 4.193761@1] aml_wdt: off, 0ms | |
[ 4.196885@1] total state: off | |
[ 4.199923@1] total time out: 10000 | |
[ 4.203428@1] reset watchdog: aml_wdt | |
[ 4.208969@1] rtl8192cu driver version=v4.0.1_6911.20130308 | |
[ 4.212597@1] build time: Jun 13 2013 17:58:02 | |
[ 4.217226@1] usbcore: registered new interface driver rtl8192cu | |
[ 4.223675@1] freescale_init | |
[ 4.227145@1] aml_hw_crypto initialization. | |
[ 4.233307@1] enter aml_dai_probe | |
[ 4.233429@1] enter dummy_codec_audio_probe | |
[ 4.235037@1] aml-pcm 0:playback preallocate_dma_buffer: area=ffd80000, addr=a7940000, size=131072 | |
[ 4.244059@1] iec958 0: preallocate dma buffer start=ffd00000, size=80000 | |
[ 4.250610@1] aml-pcm 1:capture preallocate_dma_buffer: area=ffce0000, addr=a7080000, size=65536 | |
[ 4.255937@0] usb 2-1: new high speed USB device number 2 using dwc_otg | |
[ 4.256210@0] Indeed it is in host mode hprt0 = 00001101 | |
[ 4.270597@1] asoc: dummy_codec <-> aml-dai0 mapping ok | |
[ 4.277339@1] Audio: Setup pinmux | |
[ 4.279204@1] ALSA device list: | |
[ 4.282210@1] #0: Dummy 1 | |
[ 4.284988@1] #1: AML-DUMMY-CODEC | |
[ 4.288646@1] TCP cubic registered | |
[ 4.291848@1] NET: Registered protocol family 17 | |
[ 4.296509@1] NET: Registered protocol family 15 | |
[ 4.301072@1] Registering the dns_resolver key type | |
[ 4.305946@1] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
[ 4.313721@1] ThumbEE CPU extension supported. | |
[ 4.318236@1] enter meson_pm_probe! | |
[ 4.321621@1] meson_pm_probe done ! | |
[ 4.327655@1] aml_rtc aml_rtc: setting system clock to 1970-01-01 09:38:47 UTC (34727) | |
[ 4.332992@1] CEC not init | |
[ 4.336247@1] netdev_open | |
[ 4.338283@1] Ethernet reset | |
[ 4.341149@1] NET MDA descpter start addr=e7128800 | |
[ 4.346160@1] phy_reset! | |
[ 4.348820@1] --1--write mac add to:e739c008: 00 0d fe 59 a0 8e |...Y..| | |
[ 4.355121@1] --2--write mac add to:e739c008: 00 0d fe 59 a0 8e |...Y..| | |
[ 4.361805@1] write mac add to:e739c008: 00 0d fe 59 a0 8e |...Y..| | |
[ 4.368056@1] Current DMA mode=0, set mode=621c100 | |
[ 4.372852@1] ether leave promiscuous mode | |
[ 4.376916@1] ether leave all muticast mode | |
[ 4.381134@1] changed the Multicast,mcount=1 | |
[ 4.385332@1] add mac address:01:00:5e:00:00:01,bit=32 | |
[ 4.390457@1] set hash low=0,high=1 | |
[ 4.393921@1] changed the filter setting to :4 | |
[ 4.457215@0] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610 | |
[ 4.458456@0] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
[ 4.465744@0] usb 2-1: Product: USB2.0 Hub | |
[ 4.471024@0] hub 2-1:1.0: USB hub found | |
[ 4.474030@0] hub 2-1:1.0: 4 ports detected | |
[ 4.556216@0] usb 1-1.3: new full speed USB device number 3 using dwc_otg | |
[ 4.657335@0] usb 1-1.3: New USB device found, idVendor=2548, idProduct=1001 | |
[ 4.658746@0] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
[ 4.746265@0] usb 1-1.4: new low speed USB device number 4 using dwc_otg | |
[ 4.852100@0] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c313 | |
[ 4.853511@0] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
[ 4.860993@0] usb 1-1.4: Product: USB Multimedia Keyboard | |
[ 4.866370@0] usb 1-1.4: Manufacturer: BTC | |
[ 4.875549@0] input: BTC USB Multimedia Keyboard as /devices/lm0/usb1/1-1/1-1.4/1-1.4:1.0/input/input3 | |
[ 4.880339@0] generic-usb 0003:046D:C313.0001: input: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-lm0-1.4/input0 | |
[ 4.898878@0] input: BTC USB Multimedia Keyboard as /devices/lm0/usb1/1-1/1-1.4/1-1.4:1.1/input/input4 | |
[ 4.903170@0] generic-usb 0003:046D:C313.0002: input: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-lm0-1.4/input1 | |
[ 5.006240@0] usb 2-1.1: new high speed USB device number 3 using dwc_otg | |
[ 5.107455@0] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=8176 | |
[ 5.108876@0] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[ 5.116355@0] usb 2-1.1: Product: 802.11n WLAN Adapter | |
[ 5.121458@0] usb 2-1.1: Manufacturer: Realtek | |
[ 5.125897@0] usb 2-1.1: SerialNumber: 00e04c000001 | |
[ 5.131883@0] | |
[ 5.131887@0] usb_endpoint_descriptor(0): | |
[ 5.136419@0] bLength=7 | |
[ 5.138818@0] bDescriptorType=5 | |
[ 5.141943@0] bEndpointAddress=81 | |
[ 5.145241@0] wMaxPacketSize=200 | |
[ 5.148462@0] bInterval=0 | |
[ 5.151058@0] RT_usb_endpoint_is_bulk_in = 1 | |
[ 5.155307@0] | |
[ 5.155309@0] usb_endpoint_descriptor(1): | |
[ 5.160959@0] bLength=7 | |
[ 5.163391@0] bDescriptorType=5 | |
[ 5.166519@0] bEndpointAddress=2 | |
[ 5.169717@0] wMaxPacketSize=200 | |
[ 5.172928@0] bInterval=0 | |
[ 5.175532@0] RT_usb_endpoint_is_bulk_out = 2 | |
[ 5.179892@0] | |
[ 5.179894@0] usb_endpoint_descriptor(2): | |
[ 5.185526@0] bLength=7 | |
[ 5.187953@0] bDescriptorType=5 | |
[ 5.191073@0] bEndpointAddress=3 | |
[ 5.194283@0] wMaxPacketSize=200 | |
[ 5.197505@0] bInterval=0 | |
[ 5.200100@0] RT_usb_endpoint_is_bulk_out = 3 | |
[ 5.204436@0] | |
[ 5.204438@0] usb_endpoint_descriptor(3): | |
[ 5.210089@0] bLength=7 | |
[ 5.212510@0] bDescriptorType=5 | |
[ 5.215633@0] bEndpointAddress=84 | |
[ 5.218946@0] wMaxPacketSize=40 | |
[ 5.222057@0] bInterval=1 | |
[ 5.224661@0] RT_usb_endpoint_is_int_in = 4, Interval = 1 | |
[ 5.230053@0] nr_endpoint=4, in_num=2, out_num=2 | |
[ 5.230056@0] | |
[ 5.236308@0] USB_SPEED_HIGH | |
[ 5.239178@0] CHIP TYPE: RTL8188C_8192C | |
[ 5.243001@0] register rtw_netdev_ops to netdev_ops | |
[ 5.247855@0] rtw_handle_dualmac(): pbuddy_padapter == NULL, Set pbuddy_padapter | |
[ 5.255221@0] rtw_wdev_alloc(padapter=e889b000) | |
[ 5.260120@0] Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C. | |
[ 5.265371@0] RF_Type is 3!! | |
[ 5.268605@0] EEPROM type is E-FUSE | |
[ 5.271706@0] ====> ReadAdapterInfo8192C | |
[ 5.275731@0] Boot from EFUSE, Autoload OK ! | |
[ 5.413273@0] EEPROMVID = 0x0bda | |
[ 5.413294@0] EEPROMPID = 0x8176 | |
[ 5.414071@0] EEPROMCustomerID : 0x00 | |
[ 5.417737@0] EEPROMSubCustomerID: 0x00 | |
[ 5.421542@0] RT_CustomerID: 0x00 | |
[ 5.424843@0] _ReadMACAddress MAC Address from EFUSE = 00:11:7f:15:b9:e2 | |
[ 5.431536@0] EEPROMRegulatory = 0x0 | |
[ 5.435087@0] _ReadBoardType(0) | |
[ 5.438216@0] BT Coexistance = disable | |
[ 5.441940@0] mlmepriv.ChannelPlan = 0x0a | |
[ 5.445946@0] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0) | |
[ 5.454183@0] ### PS params=> power_mgnt(1),usbss_enable(0) ### | |
[ 5.460176@0] ### AntDivCfg(0) | |
[ 5.463206@0] readAdapterInfo_8192CU(): REPLACEMENT = 1 | |
[ 5.468424@0] <==== ReadAdapterInfo8192C in 200 ms | |
[ 5.474154@0] rtw_register_early_suspend | |
[ 5.477181@0] rtw_macaddr_cfg MAC Address = 00:11:7f:15:b9:e2 | |
[ 5.482916@0] MAC Address from pnetdev->dev_addr= 00:11:7f:15:b9:e2 | |
[ 6.387521@1] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0 | |
[ 6.389144@1] register rtw_netdev_ops to netdev_ops | |
[ 6.393962@1] register rtw_netdev_if2_ops to netdev_ops | |
[ 6.399220@1] rtw_wdev_alloc(padapter=e88ec000) | |
[ 6.404179@0] Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C. | |
[ 6.409431@0] RF_Type is 3!! | |
[ 6.412235@0] Sending DHCP requests .rtw_register_early_suspend | |
[ 6.418148@0] MAC Address (if2) = 02:11:7f:15:b9:e2 | |
[ 6.423264@0] , OK | |
[ 6.455950@0] IP-Config: Got DHCP answer from 192.168.10.250, my address is 192.168.10.25 | |
[ 6.458652@0] IP-Config: Complete: | |
[ 6.461882@0] device=eth0, addr=192.168.10.25, mask=255.255.255.0, gw=192.168.10.250, | |
[ 6.469872@0] host=192.168.10.25, domain=IsErOok.NL, nis-domain=(none), | |
[ 6.476914@0] bootserver=192.168.10.250, rootserver=192.168.10.250, rootpath= | |
[ 6.495916@0] Changing baud from 0 to 115200 | |
[ 6.515908@0] BUG: spinlock bad magic on CPU#0, swapper/1 | |
[ 6.515941@0] lock: c093bb44, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 | |
[ 6.523125@0] Backtrace: | |
[ 6.525751@0] [<c003de58>] (dump_backtrace+0x0/0x10c) from [<c05a1f68>] (dump_stack+0x18/0x1c) | |
[ 6.534323@0] r6:00000000 r5:c071e3a0 r4:c093bb44 r3:c07a0e24 | |
[ 6.540145@0] [<c05a1f50>] (dump_stack+0x0/0x1c) from [<c05a507c>] (spin_bug+0x94/0xa8) | |
[ 6.548135@0] [<c05a4fe8>] (spin_bug+0x0/0xa8) from [<c02c6a38>] (do_raw_spin_lock+0x160/0x178) | |
[ 6.556804@0] r6:e7ae1000 r5:e7842000 r4:20000013 | |
[ 6.561585@0] [<c02c68d8>] (do_raw_spin_lock+0x0/0x178) from [<c05a949c>] (_raw_spin_lock_irqsave+0x18/0x20) | |
[ 6.571394@0] [<c05a9484>] (_raw_spin_lock_irqsave+0x0/0x20) from [<c02f8aa0>] (uart_dtr_rts+0x20/0x78) | |
[ 6.580761@0] r4:c093bb44 r3:80000000 | |
[ 6.584501@0] [<c02f8a80>] (uart_dtr_rts+0x0/0x78) from [<c02ea5e8>] (tty_port_block_til_ready+0x150/0x300) | |
[ 6.594215@0] r5:e7842000 r4:e7815000 | |
[ 6.597953@0] [<c02ea498>] (tty_port_block_til_ready+0x0/0x300) from [<c02faa10>] (uart_open+0x138/0x1a0) | |
[ 6.607500@0] [<c02fa8d8>] (uart_open+0x0/0x1a0) from [<c02e3798>] (tty_open+0x1e0/0x4ec) | |
[ 6.615654@0] r8:00000001 r7:c07aa8b0 r6:e7ae1000 r5:00500001 r4:e712a000 | |
[ 6.622338@0] r3:00010004 | |
[ 6.625123@0] [<c02e35b8>] (tty_open+0x0/0x4ec) from [<c00d8744>] (chrdev_open+0xc0/0x1b4) | |
[ 6.633370@0] [<c00d8684>] (chrdev_open+0x0/0x1b4) from [<c00d30cc>] (__dentry_open.isra.13+0x140/0x2a8) | |
[ 6.642823@0] r7:e74466e0 r6:e7ae1000 r5:00000000 r4:00000000 | |
[ 6.648644@0] [<c00d2f8c>] (__dentry_open.isra.13+0x0/0x2a8) from [<c00d3fcc>] (nameidata_to_filp+0x48/0x54) | |
[ 6.658454@0] [<c00d3f84>] (nameidata_to_filp+0x0/0x54) from [<c00e1a64>] (do_last.isra.32+0x290/0x6ac) | |
[ 6.667821@0] r6:00000002 r5:00000000 r4:e7843f10 r3:00000000 | |
[ 6.673643@0] [<c00e17d4>] (do_last.isra.32+0x0/0x6ac) from [<c00e2084>] (path_openat+0xc0/0x3a8) | |
[ 6.682496@0] [<c00e1fc4>] (path_openat+0x0/0x3a8) from [<c00e2460>] (do_filp_open+0x34/0x88) | |
[ 6.691002@0] [<c00e242c>] (do_filp_open+0x0/0x88) from [<c00d40c4>] (do_sys_open+0xec/0x184) | |
[ 6.699503@0] r7:ffffff9c r6:00000000 r5:e7823000 r4:00000002 | |
[ 6.705324@0] [<c00d3fd8>] (do_sys_open+0x0/0x184) from [<c00d4180>] (sys_open+0x24/0x28) | |
[ 6.713484@0] [<c00d415c>] (sys_open+0x0/0x28) from [<c0008a40>] (kernel_init+0xbc/0x148) | |
[ 6.721644@0] [<c0008984>] (kernel_init+0x0/0x148) from [<c0061fd4>] (do_exit+0x0/0x6e8) | |
[ 6.729709@0] r5:c0008984 r4:00000000 | |
[ 6.740300@0] VFS: Mounted root (nfs filesystem) on device 0:14. | |
[ 6.741110@0] devtmpfs: mounted | |
[ 6.743858@0] Freeing init memory: 176K | |
[ 7.293278@1] udevd[1481]: starting version 182 | |
[ 7.693821@1] disable watchdog: aml_wdt | |
[ 7.693867@1] suspend_watchdog: off, 0ms | |
[ 7.695926@1] aml_wdt: off, 0ms | |
[ 7.699050@1] total state: off | |
[ 7.702088@1] total time out: 10000 | |
[ 7.705561@1] suspend_watchdog: off, 0ms | |
[ 7.709466@1] aml_wdt: off, 0ms | |
[ 7.712590@1] total state: off | |
[ 7.715629@1] total time out: 10000 | |
[ 7.719102@1] set watchdog time out: aml_wdt | |
[ 7.723354@1] suspend_watchdog: off, 0ms | |
[ 7.727260@1] aml_wdt: off, 40000ms | |
[ 7.730731@1] total state: off | |
[ 7.733769@1] total time out: 10000 | |
[ 7.737388@1] enable watchdog: aml_wdt | |
[ 7.740982@1] suspend_watchdog: off, 0ms | |
[ 7.744892@1] aml_wdt: on, 40000ms | |
[ 7.748271@1] total state: off | |
[ 7.751310@1] total time out: 40000 | |
[ 7.757177@1] enable watchdog: aml_wdt | |
[ 7.758511@1] suspend_watchdog: off, 0ms | |
[ 7.762415@1] aml_wdt: on, 40000ms | |
[ 7.765798@1] total state: on | |
[ 7.768750@1] total time out: 40000 | |
[ 7.773142@1] disable watchdog: aml_wdt | |
[ 7.776046@1] suspend_watchdog: off, 0ms | |
[ 7.779948@1] aml_wdt: off, 40000ms | |
[ 7.783419@1] total state: on | |
[ 7.786371@1] total time out: 10000 | |
[ 7.789844@1] suspend_watchdog: off, 0ms | |
[ 7.793749@1] aml_wdt: off, 40000ms | |
[ 7.797220@1] total state: off | |
[ 7.800259@1] total time out: 10000 | |
[ 7.803732@1] set watchdog time out: aml_wdt | |
[ 7.807984@1] suspend_watchdog: off, 0ms | |
[ 7.811890@1] aml_wdt: off, 60000ms | |
[ 7.815361@1] total state: off | |
[ 7.818400@1] total time out: 10000 | |
[ 7.823435@1] name is aml_wdt | |
[ 7.824825@1] reset watchdog: aml_wdt | |
[ 8.802341@0] changed the Multicast,mcount=2 | |
[ 8.802421@0] add mac address:01:00:5e:00:00:01,bit=32 | |
[ 8.806161@0] add mac address:01:00:5e:00:00:fb,bit=48 | |
[ 8.811253@0] set hash low=0,high=10001 | |
[ 8.815065@0] changed the filter setting to :4 | |
[ 9.091304@0] UMP<2>: Inserting UMP device driver. Compiled: Jun 13 2013, time: 13:31:23 | |
[ 9.094533@0] UMP<2>: Using OS memory backend, allocation limit: 268435456 | |
[ 9.100656@0] UMP: UMP device driver 0000 loaded | |
[ 9.247244@0] mail version=-1 | |
[ 9.247309@0] Mali pp1 MMU register mapped at e881e000... | |
[ 9.249997@0] Mali pp2 MMU register mapped at e89f2000... | |
[ 9.305320@0] mali_meson_poweron: Interrupt received. | |
[ 9.355323@0] mail version=1 | |
[ 9.358160@1] Mali: Mali device driver loaded | |
[ 23.932180@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c | |
[ 23.932219@0] HDMI irq 2 | |
[ 23.934633@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc | |
[ 23.985891@1] HDMITX: HDCP disable | |
[ 23.985927@1] HDMI: reset IP: 0x10 | |
[ 24.213342@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc | |
[ 24.213382@0] HDMI irq 1 | |
[ 24.215701@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c | |
[ 24.826183@1] HDMI: EDID Ready | |
[ 24.826243@1] CEC: Physical address: 0x2000 | |
[ 24.827760@1] CEC: Physical address: 2.0.0.0 | |
[ 24.832055@1] HDMI: get current mode: 720p | |
[ 24.836122@1] set mode VIC 4 (cd0,cs0,pm1,vd0,1) | |
[ 24.840781@1] HDMI DEBUG: hdmi_hw_reset [1394] | |
[ 24.845211@1] HDMI: get brd phy data | |
[ 24.848776@1] hdmi phy setting | |
[ 24.852900@1] HDMI: get brd phy data | |
[ 24.855360@1] hdmi phy setting | |
[ 24.858471@1] HDMI DEBUG: hdmitx_set_pll [2068] | |
[ 24.862913@1] param->VIC:4 | |
[ 24.865604@1] mode is: 6 | |
[ 24.868134@1] VPU_VIU_VENC_MUX_CTRL: 0xa | |
[ 24.872027@1] viu chan = 1 | |
[ 24.874717@1] VPU_VIU_VENC_MUX_CTRL: 0xa | |
[ 24.879646@1] Sink is HDMI device | |
[ 24.881924@1] Source in HDMI Mode | |
[ 24.885296@1] CEC not ready | |
[ 24.995894@1] current VIC: 4 | |
[ 24.995899@1] audio sample rate: 0 | |
[ 24.995904@1] HDMI: reset audio N para | |
[ 24.995921@1] PCM out to HDMI | |
[ 25.007446@1] Time out: AIU_HDMI_CLK_DATA_CTRL | |
[ 25.017249@1] Time out: AIU_HDMI_CLK_DATA_CTRL | |
[ 25.017274@1] Enable audio spdif to HDMI | |
[ 25.020037@1] HDMI: set audio param | |
[ 26.005901@1] HDMITX: HDCP Key error | |
[ 67.829908@1] name is aml_wdt | |
[ 67.829932@1] reset watchdog: aml_wdt |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment