- 1 * Crypto-Case- purchase either 6 or 8 GPU crypto-case depending on your budget:
- EVGA PSUs (Power-Supply): 2 EVGA SuperNOVA 1000 G3, 80 Plus Gold 1000W
- 1 * PSU SPLITTER
- 1 * ASRock H110 Pro BTC+ 13GPU Mining Motherboard CryptoCurrency
- 1 * Intel Pentium G Series 3.50 GHz Dual-Core LGA 1151 Processor
- Not necessary, but 1 heat-sink compound is recommended
- At least 1 (ideally 2) * CORSAIR Vengeance LPX 8GB (1 x 8GB) DDR4 DRAM 2400MHz C16
- GPUs- depending on your crypto-case size, purchase 6 or 8 of the following:
- 1 * 6-pack, or 2 * 6-packs if building for 8 GPUs, PCIe Risers
- Purchase 1 of the following SSD hard-drives:
- If you just want to learn how to mine, purchase a low-cost, SSD-harddrive
- If you wish to learn more about mining or plan to build more than two miners, purchase a Samsung SSD >= 250 GB.
- 1 * Cable Matters USB 3.0 SATA HDD/SSD Docking Station
- 1 * Electop 2 Pack 2 Pin SW PC Power Cable on/off Push Button
- 1 * Trezor Bitcoin wallet
- 1 * 50 ft CAT-6 Ethernet Cable (or however long of a throw it is to your modem or router)
- VGA to HDMI cable
- 4 * Rosewill Case Fan Splitter Cable
- 2 * Rosewill 120mm Case Fan 4-Pack, Long Life Sleeve Bearing Computer Case Fan ROCF-13001
- 1 * ethOS license.
- 1 * Killawatt
- 1 * Indoor air-quality monitor
- 1 * Power-Squid Surge-Protector
- PLEASE NOTE: if you need an extension cable for the power-squid, please be sure to purchase >= 12 gauge power-extension- cable- highly recommend the 25-100 ft cables by Amazon Basics.
- 1 * 16 GB SSD USB thumb-drive for driver downloads and ethOS install.
- If you don't own a keyboard and mouse, purchase a combo-pack from Amazon Basics ($15)
- If you don't own a spare monitor, you can plug the rig into any flat-screen TV with an HDMI port.