For iphone 6, ipad and ipad mini
-
Consists of rubber bumper (like here) with magnet connectors for charger and headphones, and rubber buttons for volume and power, and rotating knob for ring/mute (like in catalyst)
-
2 special adaptors with magnets for charging cable and for headphone cable like here for charger, and like here for audio
-
Additional back cover and additional front cover with glass for water/dust protection.
-
Back cover snaps on to the bumper and partially covers it for rugged feel.
-
Back cover should have an openable stand for keeping the device up in horizontal position
-
Front cover also snaps on to the bumper. Glass is right on the screen for easy swiping and touching. Finger sensor for unlocking the device (like catalyst). No rainbow effect ! (like catalyst).
-
Back cover has 4 small holes (rings) on each corner for connecting nylon straps or extendable holders. This way one can keep the phone in a pocket and connect it to the belt via any ring, or use all four rings and mount the phone/tablet on any construction. An example DIY project, showing the idea.
-
Another, optional back cover, with same features as regular back cover, but larger (bulkier) and has the following additional features:
- External battery, which connects to the phone via bumper (magnet to magnet) and charges it. Has it's own magnet connector for charge-through (something similar on kickstarter)
- 4 bright LED lights on front and 4 on back (on each corner), which turn on automatically when device falls into water. Example
- 3 rubber buttons (switches ?) on the back side to set light, color and mode of the LEDs:
- Lights: only front, only back, back and front, none
- 5 light modes: 3 types of light intensity, flashing, SOS
- Two led colors: white and yellow (for using as reading light)
- Made of foam rubber (?) so the device will float
-
As slim as possible
-
Up to 10 meters under water, up to an hour
-
Up to 6 meters fall
-
Orange color, so it will be visible in sea and from far away
Manufacturers:
Reviews: