vgary06

## jellyfin-samsung.md

      
              1 file
            
          
              2 forks
            
          
                27 comments
              
            
              54 stars
            
          
                SayantanRC
                / jellyfin-samsung.md
            
            
              Last active
              September 27, 2025 19:45
            
              
                Sign Jellyfin for Samsung TVs
              
          
    Prerequisite

This guide is based on using an Ubuntu VM. The whole process will take several hours when doing for the first time. I faced issues with Windows 11, but you are free to try it. There are helpful comments below for Windows users.
Please read all the steps first before proceeding.
Steps


Get ubuntu 18.04 LTS. Create a VM if needed.
Install Tizen Studio from here: https://developer.tizen.org/development/tizen-studio/download
Run the .bin file from terminal


## noip2.service
# Simple No-ip.com Dynamic DNS Updater
#
# By Nathan Giesbrecht (http://nathangiesbrecht.com)
#
# 1) Install binary as described in no-ip.com's source file (assuming results in /usr/local/bin)
# 2) Run sudo /usr/local/bin/noip2 -C to generate configuration file
# 3) Copy this file noip2.service to /etc/systemd/system/
# 4) Execute `sudo systemctl daemon-reload`
# 5) Execute `sudo systemctl enable noip2`
# 6) Execute `sudo systemctl start noip2`
	# Simple No-ip.com Dynamic DNS Updater
	#
	# By Nathan Giesbrecht (http://nathangiesbrecht.com)
	#
	# 1) Install binary as described in no-ip.com's source file (assuming results in /usr/local/bin)
	# 2) Run sudo /usr/local/bin/noip2 -C to generate configuration file
	# 3) Copy this file noip2.service to /etc/systemd/system/
	# 4) Execute `sudo systemctl daemon-reload`
	# 5) Execute `sudo systemctl enable noip2`
	# 6) Execute `sudo systemctl start noip2`