Skip to content

Instantly share code, notes, and snippets.

@vinnix
Created September 11, 2012 18:42
Show Gist options
  • Save vinnix/3700744 to your computer and use it in GitHub Desktop.
Save vinnix/3700744 to your computer and use it in GitHub Desktop.
root (hd0)
Filesystem type is ext2fs, using whole disk
kernel /boot/vmlinuz-2.6.32-279.5.2.el6.x86_64 ro root=/dev/xvda1 init=/sbin/in
it rootfstype=ext3
initrd /boot/initramfs-2.6.32-279.5.2.el6.x86_64.img
close blk: backend at /local/domain/0/backend/vbd/1008/2049
close blk: backend at /local/domain/0/backend/vbd/1008/2051
close blk: backend at /local/domain/0/backend/vbd/1008/2256
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-279.5.2.el6.x86_64 (mockbuild@c6b10.bsys.dev.centos.org) (gcc version 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) ) #1 SMP Fri Aug 24 01:07:11 UTC 2012
Command line: ro root=/dev/xvda1 init=/sbin/init rootfstype=ext3
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
ACPI in unprivileged domain disabled
released 0 pages of unused memory
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000000000a0000 (usable)
Xen: 00000000000a0000 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 000000006a400000 (usable)
DMI not present or invalid.
last_pfn = 0x6a400 max_arch_pfn = 0x400000000
init_memory_mapping: 0000000000000000-000000006a400000
RAMDISK: 02033000 - 04935000
No NUMA configuration found
Faking a node at 0000000000000000-000000006a400000
Bootmem setup node 0 0000000000000000-000000006a400000
NODE_DATA [0000000000008000 - 000000000003bfff]
bootmap [000000000003c000 - 000000000004947f] pages e
(7 early reservations) ==> bootmem [0000000000 - 006a400000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0004c8a000 - 0004cb5000] XEN PAGETABLES ==> [0004c8a000 - 0004cb5000]
#2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#3 [0001000000 - 0002012024] TEXT DATA BSS ==> [0001000000 - 0002012024]
#4 [0002033000 - 0004935000] RAMDISK ==> [0002033000 - 0004935000]
#5 [0004935000 - 0004c8a000] XEN START INFO ==> [0004935000 - 0004c8a000]
#6 [0000100000 - 0000427000] PGTABLE ==> [0000100000 - 0000427000]
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000001 -> 0x000000a0
0: 0x00000100 -> 0x0006a400
SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
SMP: Allowing 1 CPUs, 0 hotplug CPUs
No local APIC present
APIC: disable apic facility
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at 6a400000 (gap: 6a400000:95c00000)
Booting paravirtualized kernel on Xen
Xen version: 3.4.3-2.6.18 (preserve-AD)
NR_CPUS:4096 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880004ceb000 s94424 r8192 d24360 u126976
pcpu-alloc: s94424 r8192 d24360 u126976 alloc=31*4096
pcpu-alloc: [0] 0
Xen: using vcpu_info placement
Built 1 zonelists in Node order, mobility grouping on. Total pages: 428343
Policy zone: DMA32
Kernel command line: ro root=/dev/xvda1 init=/sbin/init rootfstype=ext3
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Memory: 1649384k/1740800k available (5152k kernel code, 388k absent, 91028k reserved, 7166k data, 1260k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:256
Console: colour dummy device 80x25
console [tty0] enabled
console [hvc0] enabled
allocated 14680064 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
installing Xen timer for CPU 0
Detected 2666.756 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.51 BogoMIPS (lpj=2666756)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: CPU feature constant_tsc disabled on xen guest
CPU: Unsupported number of siblings 4
alternatives: switching to unfair spinlock
SMP alternatives: switching to UP code
Freeing SMP alternatives: 34k freed
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21016 entries in 83 pages
Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only.
NMI watchdog disabled (cpu0): hardware events not enabled
Brought up 1 CPUs
devtmpfs: initialized
Grant table initialized
regulator: core version 0.5
NET: Registered protocol family 16
PCI: Fatal: No config space access function found
bio: create slab <bio-0> at 0
ACPI: Interpreter disabled.
xen_balloon: Initialising balloon driver.
last_pfn = 0x6a400 max_arch_pfn = 0x400000000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource xen
pnp: PnP ACPI: disabled
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 41992k freed
platform rtc_cmos: registered platform RTC device (no PNP device found)
audit: initializing netlink socket (disabled)
type=2000 audit(1347387447.894:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 3303
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key E82C5CB35B8516BA
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
mice: PS/2 mouse device common for all mice
rtc_cmos: probe of rtc_cmos failed with error -16
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
XENBUS: Device with no driver: device/vbd/2049
XENBUS: Device with no driver: device/vbd/2256
XENBUS: Device with no driver: device/vbd/2051
XENBUS: Device with no driver: device/vif/0
XENBUS: Device with no driver: device/console/0
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Initalizing network drop monitor service
Freeing unused kernel memory: 1260k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 972k freed
Freeing unused kernel memory: 1732k freed
dracut: dracut-004-284.el6_3
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
xlblk_init: register_blkdev major: 202
blkfront: xvde1: barriers disabled
blkfront: xvdr: barriers disabled
xvdr: xvdr1
blkfront: xvde3: barriers disabled
dracut Warning: No root device "block:/dev/xvda1" found
dracut Warning: Boot has failed. To debug this issue add "rdshell" to the kernel command line.
dracut Warning: Signal caught!
dracut Warning: Boot has failed. To debug this issue add "rdshell" to the kernel command line.
Kernel panic - not syncing: Attempted to kill init!
Pid: 1, comm: init Not tainted 2.6.32-279.5.2.el6.x86_64 #1
Call Trace:
[<ffffffff814fd39a>] ? panic+0xa0/0x168
[<ffffffff81070bd2>] ? do_exit+0x862/0x870
[<ffffffff8117ccf5>] ? fput+0x25/0x30
[<ffffffff81070c38>] ? do_group_exit+0x58/0xd0
[<ffffffff81070cc7>] ? sys_exit_group+0x17/0x20
[<ffffffff8100b0f2>] ? system_call_fastpath+0x16/0x1b
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment