Skip to content

Instantly share code, notes, and snippets.

@vitaly-zdanevich
Created May 26, 2023 15:41
Show Gist options
  • Save vitaly-zdanevich/8642cf9a04b490dfb8a02b3f6479ac7d to your computer and use it in GitHub Desktop.
Save vitaly-zdanevich/8642cf9a04b490dfb8a02b3f6479ac7d to your computer and use it in GitHub Desktop.
$ dmesg;
$ dmesg
[ 0.000000] Linux version 6.1.12-gentoo+ (root@thinkpad-t430) (gcc (Gentoo 12.2.1_p20230121-r1 p10) 12.2.1 20230121, GNU ld (Gentoo 2.39 p5) 2.39.0) #1 SMP PREEMPT_DYNAMIC Fri Mar 10 15:10:58 +04 2023
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.12-gentoo+ root=/dev/sda3 ro i915.fastboot=1 mitigations=off
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] signal: max sigframe size: 1360
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000afbc4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000afbc5000-0x00000000afdc6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000afdc7000-0x00000000b6a0bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b6a0c000-0x00000000b6c0bfff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000b6c0c000-0x00000000bae9efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae9f000-0x00000000baf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043e5fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000043e600000-0x000000043e7fffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 2342CTO/2342CTO, BIOS G1ETC2WW (2.82 ) 08/07/2019
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2793.584 MHz processor
[ 0.000575] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000577] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000582] last_pfn = 0x43e600 max_arch_pfn = 0x400000000
[ 0.000679] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001272] last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[ 0.002058] ACPI: Early table checksum verification disabled
[ 0.002060] ACPI: RSDP 0x00000000000F0120 000024 (v02 IntelR)
[ 0.002063] ACPI: XSDT 0x00000000BAFFE170 0000B4 (v01 LENOVO TP-G1 00002820 PTL 00000002)
[ 0.002068] ACPI: FACP 0x00000000BAFE7000 00010C (v05 LENOVO TP-G1 00002820 PTL 00000002)
[ 0.002072] ACPI: DSDT 0x00000000BAFE9000 0103F7 (v01 LENOVO TP-G1 00002820 INTL 20061109)
[ 0.002075] ACPI: FACS 0x00000000BAF6A000 000040
[ 0.002077] ACPI: SLIC 0x00000000BAFFD000 000176 (v01 LENOVO TP-G1 00002820 PTL 00000001)
[ 0.002080] ACPI: SSDT 0x00000000BAFFC000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[ 0.002082] ACPI: SSDT 0x00000000BAFFB000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[ 0.002085] ACPI: SSDT 0x00000000BAFFA000 000797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[ 0.002087] ACPI: ASF! 0x00000000BAFE8000 0000A5 (v32 LENOVO TP-G1 00002820 PTL 00000002)
[ 0.002090] ACPI: HPET 0x00000000BAFE5000 000038 (v01 LENOVO TP-G1 00002820 PTL 00000002)
[ 0.002092] ACPI: APIC 0x00000000BAFE4000 000098 (v01 LENOVO TP-G1 00002820 PTL 00000002)
[ 0.002095] ACPI: MCFG 0x00000000BAFE3000 00003C (v01 LENOVO TP-G1 00002820 PTL 00000002)
[ 0.002097] ACPI: ECDT 0x00000000BAFE2000 000052 (v01 LENOVO TP-G1 00002820 PTL 00000002)
[ 0.002100] ACPI: FPDT 0x00000000BAFE1000 000064 (v01 LENOVO TP-G1 00002820 PTL 00000002)
[ 0.002102] ACPI: UEFI 0x00000000BAFE0000 00003E (v01 LENOVO TP-G1 00002820 PTL 00000002)
[ 0.002105] ACPI: UEFI 0x00000000BAFDF000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.002107] ACPI: POAT 0x00000000BAFDE000 000055 (v03 LENOVO TP-G1 00002820 PTL 00000002)
[ 0.002110] ACPI: SSDT 0x00000000BAFDD000 000C51 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.002112] ACPI: SSDT 0x00000000BAFDC000 000A83 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.002115] ACPI: UEFI 0x00000000BAFDB000 000292 (v01 LENOVO TP-G1 00002820 PTL 00000002)
[ 0.002118] ACPI: DBG2 0x00000000BAFDA000 0000E9 (v00 LENOVO TP-G1 00002820 PTL 00000002)
[ 0.002120] ACPI: Reserving FACP table memory at [mem 0xbafe7000-0xbafe710b]
[ 0.002121] ACPI: Reserving DSDT table memory at [mem 0xbafe9000-0xbaff93f6]
[ 0.002122] ACPI: Reserving FACS table memory at [mem 0xbaf6a000-0xbaf6a03f]
[ 0.002122] ACPI: Reserving SLIC table memory at [mem 0xbaffd000-0xbaffd175]
[ 0.002123] ACPI: Reserving SSDT table memory at [mem 0xbaffc000-0xbaffc407]
[ 0.002124] ACPI: Reserving SSDT table memory at [mem 0xbaffb000-0xbaffb032]
[ 0.002125] ACPI: Reserving SSDT table memory at [mem 0xbaffa000-0xbaffa796]
[ 0.002126] ACPI: Reserving ASF! table memory at [mem 0xbafe8000-0xbafe80a4]
[ 0.002126] ACPI: Reserving HPET table memory at [mem 0xbafe5000-0xbafe5037]
[ 0.002127] ACPI: Reserving APIC table memory at [mem 0xbafe4000-0xbafe4097]
[ 0.002128] ACPI: Reserving MCFG table memory at [mem 0xbafe3000-0xbafe303b]
[ 0.002129] ACPI: Reserving ECDT table memory at [mem 0xbafe2000-0xbafe2051]
[ 0.002129] ACPI: Reserving FPDT table memory at [mem 0xbafe1000-0xbafe1063]
[ 0.002130] ACPI: Reserving UEFI table memory at [mem 0xbafe0000-0xbafe003d]
[ 0.002131] ACPI: Reserving UEFI table memory at [mem 0xbafdf000-0xbafdf041]
[ 0.002132] ACPI: Reserving POAT table memory at [mem 0xbafde000-0xbafde054]
[ 0.002132] ACPI: Reserving SSDT table memory at [mem 0xbafdd000-0xbafddc50]
[ 0.002133] ACPI: Reserving SSDT table memory at [mem 0xbafdc000-0xbafdca82]
[ 0.002134] ACPI: Reserving UEFI table memory at [mem 0xbafdb000-0xbafdb291]
[ 0.002135] ACPI: Reserving DBG2 table memory at [mem 0xbafda000-0xbafda0e8]
[ 0.002163] Zone ranges:
[ 0.002163] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.002165] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.002166] Normal [mem 0x0000000100000000-0x000000043e5fffff]
[ 0.002167] Movable zone start for each node
[ 0.002168] Early memory node ranges
[ 0.002168] node 0: [mem 0x0000000000001000-0x000000000008ffff]
[ 0.002169] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.002170] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.002171] node 0: [mem 0x0000000040005000-0x00000000afbc4fff]
[ 0.002172] node 0: [mem 0x00000000afdc7000-0x00000000b6a0bfff]
[ 0.002173] node 0: [mem 0x00000000bafff000-0x00000000baffffff]
[ 0.002173] node 0: [mem 0x0000000100000000-0x000000043e5fffff]
[ 0.002175] Initmem setup node 0 [mem 0x0000000000001000-0x000000043e5fffff]
[ 0.002178] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.002201] On node 0, zone DMA: 112 pages in unavailable ranges
[ 0.003755] On node 0, zone DMA32: 512 pages in unavailable ranges
[ 0.006530] On node 0, zone DMA32: 1 pages in unavailable ranges
[ 0.006712] On node 0, zone DMA32: 514 pages in unavailable ranges
[ 0.006866] On node 0, zone DMA32: 17907 pages in unavailable ranges
[ 0.027753] On node 0, zone Normal: 20480 pages in unavailable ranges
[ 0.027814] On node 0, zone Normal: 6656 pages in unavailable ranges
[ 0.027823] Reserving Intel graphics memory at [mem 0xbba00000-0xbf9fffff]
[ 0.028039] ACPI: PM-Timer IO Port: 0x408
[ 0.028045] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.028046] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.028059] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.028062] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.028063] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.028067] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.028068] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.028072] TSC deadline timer available
[ 0.028072] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.028087] [mem 0xbfa00000-0xf80f7fff] available for PCI devices
[ 0.028090] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.028094] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.028254] percpu: Embedded 43 pages/cpu s135976 r8192 d31960 u262144
[ 0.028259] pcpu-alloc: s135976 r8192 d31960 u262144 alloc=1*2097152
[ 0.028261] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.028279] Built 1 zonelists, mobility grouping on. Total pages: 4083161
[ 0.028281] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.12-gentoo+ root=/dev/sda3 ro i915.fastboot=1 mitigations=off
[ 0.028309] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.12-gentoo+", will be passed to user space.
[ 0.028314] printk: log_buf_len individual max cpu contribution: 32768 bytes
[ 0.028315] printk: log_buf_len total cpu_extra contributions: 229376 bytes
[ 0.028316] printk: log_buf_len min size: 32768 bytes
[ 0.028439] printk: log_buf_len: 262144 bytes
[ 0.028439] printk: early log buf free: 23608(72%)
[ 0.029227] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.029611] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.029682] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.029684] software IO TLB: area num 8.
[ 0.073635] Memory: 16213424K/16592484K available (12288K kernel code, 682K rwdata, 3676K rodata, 948K init, 2320K bss, 378804K reserved, 0K cma-reserved)
[ 0.073682] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.074085] Dynamic Preempt: voluntary
[ 0.074114] rcu: Preemptible hierarchical RCU implementation.
[ 0.074116] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.074128] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16
[ 0.074303] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.074366] Console: colour dummy device 80x25
[ 0.074578] printk: console [tty0] enabled
[ 0.074588] ACPI: Core revision 20220331
[ 0.074722] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.074740] APIC: Switch to symmetric I/O mode setup
[ 0.075149] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.091407] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x28449402bdc, max_idle_ns: 440795297225 ns
[ 0.091415] Calibrating delay loop (skipped), value calculated using timer frequency.. 5589.96 BogoMIPS (lpj=9311946)
[ 0.091420] pid_max: default: 32768 minimum: 301
[ 0.091439] LSM: Security Framework initializing
[ 0.091480] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.091508] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.091696] process: using mwait in idle threads
[ 0.091700] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.091702] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.091708] Spectre V2 : User space: Vulnerable
[ 0.091710] Speculative Store Bypass: Vulnerable
[ 0.091713] SRBDS: Vulnerable: No microcode
[ 0.091954] Freeing SMP alternatives memory: 36K
[ 0.092876] smpboot: CPU0: Intel(R) Core(TM) i7-3840QM CPU @ 2.80GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.092978] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.092993] ... version: 3
[ 0.092995] ... bit width: 48
[ 0.092996] ... generic registers: 4
[ 0.092998] ... value mask: 0000ffffffffffff
[ 0.093000] ... max period: 00007fffffffffff
[ 0.093002] ... fixed-purpose events: 3
[ 0.093003] ... event mask: 000000070000000f
[ 0.093111] Estimated ratio of average max frequency by base frequency (times 1024): 1316
[ 0.093130] rcu: Hierarchical SRCU implementation.
[ 0.093132] rcu: Max phase no-delay instances is 1000.
[ 0.093224] smp: Bringing up secondary CPUs ...
[ 0.093287] x86: Booting SMP configuration:
[ 0.093290] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.104789] smp: Brought up 1 node, 8 CPUs
[ 0.104799] smpboot: Max logical packages: 1
[ 0.104801] smpboot: Total of 8 processors activated (44715.73 BogoMIPS)
[ 0.106718] devtmpfs: initialized
[ 0.106839] ACPI: PM: Registering ACPI NVS region [mem 0xbae9f000-0xbaf9efff] (1048576 bytes)
[ 0.106881] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.106887] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.107043] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.107154] thermal_sys: Registered thermal governor 'step_wise'
[ 0.107155] thermal_sys: Registered thermal governor 'user_space'
[ 0.107189] cpuidle: using governor ladder
[ 0.107213] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.107430] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.107437] PCI: not using MMCONFIG
[ 0.107441] PCI: Using configuration type 1 for base access
[ 0.107454] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.107594] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.109338] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.109341] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.109457] ACPI: Added _OSI(Module Device)
[ 0.109460] ACPI: Added _OSI(Processor Device)
[ 0.109462] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.109464] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.116116] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.116423] ACPI: EC: EC started
[ 0.116426] ACPI: EC: interrupt blocked
[ 0.116815] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.116818] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.116994] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.119655] ACPI: Dynamic OEM Table Load:
[ 0.119666] ACPI: SSDT 0xFFFF888100297000 000A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.120122] ACPI: Dynamic OEM Table Load:
[ 0.120130] ACPI: SSDT 0xFFFF8881009EA000 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.120478] ACPI: Dynamic OEM Table Load:
[ 0.120484] ACPI: SSDT 0xFFFF8881001B6C00 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.121706] ACPI: Interpreter enabled
[ 0.121722] ACPI: PM: (supports S0 S3 S5)
[ 0.121724] ACPI: Using IOAPIC for interrupt routing
[ 0.121743] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.122088] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.122099] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.122102] PCI: Using E820 reservations for host bridge windows
[ 0.122304] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.124640] ACPI: PM: Power Resource [PUBS]
[ 0.124958] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[ 0.125566] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[ 0.127288] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.127348] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.127351] ACPI: PCI: Interrupt link LNKB disabled
[ 0.127405] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.127408] ACPI: PCI: Interrupt link LNKC disabled
[ 0.127460] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.127463] ACPI: PCI: Interrupt link LNKD disabled
[ 0.127516] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.127519] ACPI: PCI: Interrupt link LNKE disabled
[ 0.127571] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.127574] ACPI: PCI: Interrupt link LNKF disabled
[ 0.127629] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.127631] ACPI: PCI: Interrupt link LNKG disabled
[ 0.127685] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.127688] ACPI: PCI: Interrupt link LNKH disabled
[ 0.127750] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.127757] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.127807] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability LTR]
[ 0.127849] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.127853] acpi PNP0A08:00: _OSC: OS requested [PME AER PCIeCapability LTR]
[ 0.127856] acpi PNP0A08:00: _OSC: platform willing to grant [PME AER]
[ 0.127858] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_SUPPORT)
[ 0.127937] PCI host bridge to bus 0000:00
[ 0.127940] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.127944] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.127947] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.127950] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff window]
[ 0.127954] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.127970] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.128030] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.128040] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[ 0.128048] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.128054] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
[ 0.128067] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.128154] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.128177] pci 0000:00:14.0: reg 0x10: [mem 0xe1520000-0xe152ffff 64bit]
[ 0.128245] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.128322] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.128337] pci 0000:00:19.0: reg 0x10: [mem 0xe1500000-0xe151ffff]
[ 0.128347] pci 0000:00:19.0: reg 0x14: [mem 0xe153b000-0xe153bfff]
[ 0.128357] pci 0000:00:19.0: reg 0x18: [io 0x5080-0x509f]
[ 0.128415] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.128484] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.128502] pci 0000:00:1a.0: reg 0x10: [mem 0xe153a000-0xe153a3ff]
[ 0.128584] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.128658] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.128677] pci 0000:00:1b.0: reg 0x10: [mem 0xe1530000-0xe1533fff 64bit]
[ 0.128753] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.128843] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.128992] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.129099] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.129249] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.129353] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.129370] pci 0000:00:1d.0: reg 0x10: [mem 0xe1539000-0xe15393ff]
[ 0.129452] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.129527] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.129693] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.129707] pci 0000:00:1f.2: reg 0x10: [io 0x50a8-0x50af]
[ 0.129716] pci 0000:00:1f.2: reg 0x14: [io 0x50bc-0x50bf]
[ 0.129725] pci 0000:00:1f.2: reg 0x18: [io 0x50a0-0x50a7]
[ 0.129734] pci 0000:00:1f.2: reg 0x1c: [io 0x50b8-0x50bb]
[ 0.129743] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
[ 0.129752] pci 0000:00:1f.2: reg 0x24: [mem 0xe1538000-0xe15387ff]
[ 0.129794] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.129860] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.129878] pci 0000:00:1f.3: reg 0x10: [mem 0xe1534000-0xe15340ff 64bit]
[ 0.129900] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.129974] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.129995] pci 0000:00:1f.6: reg 0x10: [mem 0xe1537000-0xe1537fff 64bit]
[ 0.130263] pci 0000:02:00.0: [1180:e823] type 00 class 0x088001
[ 0.130300] pci 0000:02:00.0: reg 0x10: [mem 0xe0d00000-0xe0d000ff]
[ 0.130531] pci 0000:02:00.0: supports D1 D2
[ 0.130533] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.130998] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.131005] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.131011] pci 0000:00:1c.0: bridge window [mem 0xe0d00000-0xe14fffff]
[ 0.131021] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe0bfffff 64bit pref]
[ 0.131252] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
[ 0.131459] pci 0000:03:00.0: reg 0x10: [mem 0xe0c00000-0xe0c01fff 64bit]
[ 0.132243] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.132793] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.132804] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe0cfffff]
[ 0.132834] pci_bus 0000:00: on NUMA node 0
[ 0.133623] ACPI: EC: interrupt unblocked
[ 0.133626] ACPI: EC: event unblocked
[ 0.133635] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.133637] ACPI: EC: GPE=0x11
[ 0.133639] ACPI: \_SB_.PCI0.LPC_.EC__: Boot ECDT EC initialization complete
[ 0.133642] ACPI: \_SB_.PCI0.LPC_.EC__: EC: Used to handle transactions and events
[ 0.133721] SCSI subsystem initialized
[ 0.133730] libata version 3.00 loaded.
[ 0.133733] ACPI: bus type USB registered
[ 0.133745] usbcore: registered new interface driver usbfs
[ 0.133753] usbcore: registered new interface driver hub
[ 0.133760] usbcore: registered new device driver usb
[ 0.133779] pps_core: LinuxPPS API ver. 1 registered
[ 0.133782] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.133786] PTP clock support registered
[ 0.133795] EDAC MC: Ver: 3.0.0
[ 0.133993] Advanced Linux Sound Architecture Driver Initialized.
[ 0.134087] NetLabel: Initializing
[ 0.134090] NetLabel: domain hash size = 128
[ 0.134092] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.134105] NetLabel: unlabeled traffic allowed by default
[ 0.134141] PCI: Using ACPI for IRQ routing
[ 0.135642] PCI: pci_cache_line_size set to 64 bytes
[ 0.135964] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.135966] e820: reserve RAM buffer [mem 0xafbc5000-0xafffffff]
[ 0.135967] e820: reserve RAM buffer [mem 0xb6a0c000-0xb7ffffff]
[ 0.135968] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[ 0.135969] e820: reserve RAM buffer [mem 0x43e600000-0x43fffffff]
[ 0.135988] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.135992] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.135994] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.135999] vgaarb: loaded
[ 0.136251] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.136260] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.139102] clocksource: Switched to clocksource tsc-early
[ 0.139139] VFS: Disk quotas dquot_6.6.0
[ 0.139149] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.139183] pnp: PnP ACPI init
[ 0.139456] pnp 00:00: disabling [mem 0x000c0000-0x000c3fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.139462] pnp 00:00: disabling [mem 0x000c4000-0x000c7fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.139466] pnp 00:00: disabling [mem 0x000c8000-0x000cbfff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.139470] pnp 00:00: disabling [mem 0x000cc000-0x000cffff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.139474] pnp 00:00: disabling [mem 0x000d0000-0x000d3fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.139479] pnp 00:00: disabling [mem 0x000d4000-0x000d7fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.139483] pnp 00:00: disabling [mem 0x000d8000-0x000dbfff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.139487] pnp 00:00: disabling [mem 0x000dc000-0x000dffff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.139511] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.139515] system 00:00: [mem 0x000e0000-0x000e3fff] has been reserved
[ 0.139518] system 00:00: [mem 0x000e4000-0x000e7fff] has been reserved
[ 0.139521] system 00:00: [mem 0x000e8000-0x000ebfff] has been reserved
[ 0.139524] system 00:00: [mem 0x000ec000-0x000effff] has been reserved
[ 0.139527] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.139530] system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved
[ 0.139533] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.139620] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[ 0.139639] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.139642] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.139645] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.139648] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.139651] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.139654] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
[ 0.139657] system 00:01: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.139660] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.139663] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.139666] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.139669] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.139672] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.139675] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.140083] pnp: PnP ACPI: found 5 devices
[ 0.143726] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.143726] NET: Registered PF_INET protocol family
[ 0.144814] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.147912] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.147930] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.147936] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.148103] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.148414] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.148445] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.148481] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.148547] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.148729] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.148739] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.148747] pci 0000:00:1c.0: bridge window [mem 0xe0d00000-0xe14fffff]
[ 0.148753] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe0bfffff 64bit pref]
[ 0.148764] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.148771] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe0cfffff]
[ 0.148785] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.148788] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.148791] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.148794] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff window]
[ 0.148797] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.148800] pci_bus 0000:02: resource 1 [mem 0xe0d00000-0xe14fffff]
[ 0.148802] pci_bus 0000:02: resource 2 [mem 0xe0400000-0xe0bfffff 64bit pref]
[ 0.148806] pci_bus 0000:03: resource 1 [mem 0xe0c00000-0xe0cfffff]
[ 0.149296] PCI: CLS 64 bytes, default 64
[ 0.149315] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.149318] software IO TLB: mapped [mem 0x00000000b2a0c000-0x00000000b6a0c000] (64MB)
[ 0.149366] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 0.149370] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 0.149372] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 0.149374] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 0.150389] Initialise system trusted keyrings
[ 0.150420] workingset: timestamp_bits=46 max_order=22 bucket_order=0
[ 0.162162] Key type asymmetric registered
[ 0.162166] Asymmetric key parser 'x509' registered
[ 0.162177] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.162204] io scheduler mq-deadline registered
[ 0.163131] ACPI: AC: AC Adapter [AC] (on-line)
[ 0.163177] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.163233] ACPI: button: Lid Switch [LID]
[ 0.163261] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.163292] ACPI: button: Sleep Button [SLPB]
[ 0.163325] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.163354] ACPI: button: Power Button [PWRF]
[ 0.165670] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.165676] ACPI: thermal: Thermal Zone [THM0] (50 C)
[ 0.165896] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.168225] Non-volatile memory driver v1.3
[ 0.168229] Linux agpgart interface v0.103
[ 0.168338] ACPI: bus type drm_connector registered
[ 0.169008] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 0.175693] ACPI: battery: Slot [BAT0] (battery present)
[ 0.277457] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 0.277822] ACPI: video: Video Device [VID] (multi-head: yes rom: no post: no)
[ 0.277939] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 0.278711] loop: module loaded
[ 0.278766] ahci 0000:00:1f.2: version 3.0
[ 0.278916] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[ 0.278922] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.279439] scsi host0: ahci
[ 0.279679] scsi host1: ahci
[ 0.279794] scsi host2: ahci
[ 0.279906] scsi host3: ahci
[ 0.280012] scsi host4: ahci
[ 0.280119] scsi host5: ahci
[ 0.280171] ata1: SATA max UDMA/133 abar m2048@0xe1538000 port 0xe1538100 irq 25
[ 0.280178] ata2: DUMMY
[ 0.280181] ata3: DUMMY
[ 0.280183] ata4: DUMMY
[ 0.280186] ata5: DUMMY
[ 0.280188] ata6: DUMMY
[ 0.280240] usbcore: registered new interface driver cdc_ether
[ 0.280252] usbcore: registered new interface driver cdc_ncm
[ 0.280259] usbcore: registered new interface driver cdc_mbim
[ 0.280268] usbcore: registered new interface driver r8153_ecm
[ 0.280391] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.280432] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.280449] ehci-pci 0000:00:1a.0: debug port 2
[ 0.284378] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe153a000
[ 0.322407] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.322470] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 0.322475] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.322479] usb usb1: Product: EHCI Host Controller
[ 0.322481] usb usb1: Manufacturer: Linux 6.1.12-gentoo+ ehci_hcd
[ 0.322484] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.322669] hub 1-0:1.0: USB hub found
[ 0.322679] hub 1-0:1.0: 3 ports detected
[ 0.322888] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.322961] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.322980] ehci-pci 0000:00:1d.0: debug port 2
[ 0.326889] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe1539000
[ 0.379460] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.379517] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 0.379522] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.379525] usb usb2: Product: EHCI Host Controller
[ 0.379527] usb usb2: Manufacturer: Linux 6.1.12-gentoo+ ehci_hcd
[ 0.379530] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.379658] hub 2-0:1.0: USB hub found
[ 0.379668] hub 2-0:1.0: 3 ports detected
[ 0.379892] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.379929] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.381002] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[ 0.381147] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.381179] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.381184] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.381213] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 0.381218] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.381221] usb usb3: Product: xHCI Host Controller
[ 0.381223] usb usb3: Manufacturer: Linux 6.1.12-gentoo+ xhci-hcd
[ 0.381226] usb usb3: SerialNumber: 0000:00:14.0
[ 0.381352] hub 3-0:1.0: USB hub found
[ 0.381367] hub 3-0:1.0: 4 ports detected
[ 0.381734] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 0.381740] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.381743] usb usb4: Product: xHCI Host Controller
[ 0.381746] usb usb4: Manufacturer: Linux 6.1.12-gentoo+ xhci-hcd
[ 0.381748] usb usb4: SerialNumber: 0000:00:14.0
[ 0.381863] hub 4-0:1.0: USB hub found
[ 0.381878] hub 4-0:1.0: 4 ports detected
[ 0.382310] usbcore: registered new interface driver cdc_wdm
[ 0.382330] usbcore: registered new interface driver usb-storage
[ 0.382397] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.384022] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.384028] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.384361] rtc_cmos 00:02: RTC can wake from S4
[ 0.384671] rtc_cmos 00:02: registered as rtc0
[ 0.384704] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[ 0.384787] intel_pstate: Intel P-state driver initializing
[ 0.384851] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 0.385097] hid: raw HID events driver (C) Jiri Kosina
[ 0.385133] usbcore: registered new interface driver usbhid
[ 0.385138] usbhid: USB HID core driver
[ 0.385345] i2c i2c-9: 2/2 memory slots populated (from DMI)
[ 0.385684] i2c i2c-9: Successfully instantiated SPD at 0x50
[ 0.385749] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.385853] usbcore: registered new interface driver snd-usb-audio
[ 0.386019] i2c i2c-9: Successfully instantiated SPD at 0x51
[ 0.386402] Initializing XFRM netlink socket
[ 0.386412] NET: Registered PF_PACKET protocol family
[ 0.386425] Key type dns_resolver registered
[ 0.391811] IPI shorthand broadcast: enabled
[ 0.391836] sched_clock: Marking stable (391373477, 408256)->(399061968, -7280235)
[ 0.391931] Loading compiled-in X.509 certificates
[ 0.392738] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 0.393110] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 0.393116] ALSA device list:
[ 0.393122] Loading firmware: regulatory.db
[ 0.393131] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 0.393136] cfg80211: failed to load regulatory.db
[ 0.393145] No soundcards found.
[ 0.682579] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops 0xffffffff81e93900)
[ 0.683506] fbcon: i915drmfb (fb0) is primary device
[ 0.700128] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 0.700136] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 0.700140] snd_hda_codec_generic hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 0.700143] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
[ 0.700145] snd_hda_codec_generic hdaudioC0D0: inputs:
[ 0.700148] snd_hda_codec_generic hdaudioC0D0: Mic=0x18
[ 0.700151] snd_hda_codec_generic hdaudioC0D0: Internal Mic=0x12
[ 0.706061] snd_hda_codec_generic hdaudioC0D3: ignore pin 0x7, too many assigned pins
[ 0.706066] snd_hda_codec_generic hdaudioC0D3: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 0.706071] snd_hda_codec_generic hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 0.706074] snd_hda_codec_generic hdaudioC0D3: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 0.706077] snd_hda_codec_generic hdaudioC0D3: mono: mono_out=0x0
[ 0.706080] snd_hda_codec_generic hdaudioC0D3: dig-out=0x5/0x6
[ 0.706082] snd_hda_codec_generic hdaudioC0D3: inputs:
[ 0.707862] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 0.707900] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 0.707947] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 0.707982] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 1.062715] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.084788] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 1.084805] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.126619] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.127355] ata1.00: ACPI cmd f5/00:00:00:00:00:a0(SECURITY FREEZE LOCK) filtered out
[ 1.127364] ata1.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out
[ 1.128913] ata1.00: supports DRM functions and may not be fully accessible
[ 1.128918] ata1.00: ATA-11: Samsung SSD 870 EVO 4TB, SVT02B6Q, max UDMA/133
[ 1.135292] ata1.00: 7814037168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.147821] ata1.00: Features: Trust Dev-Sleep NCQ-sndrcv
[ 1.148279] ata1.00: ACPI cmd f5/00:00:00:00:00:a0(SECURITY FREEZE LOCK) filtered out
[ 1.148288] ata1.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out
[ 1.155029] ata1.00: supports DRM functions and may not be fully accessible
[ 1.242129] ata1.00: configured for UDMA/133
[ 1.304607] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.304617] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.305028] hub 1-1:1.0: USB hub found
[ 1.305069] hub 1-1:1.0: 6 ports detected
[ 1.321580] usb 3-1: New USB device found, idVendor=1235, idProduct=8211, bcdDevice= 5.ff
[ 1.321582] usb 3-1: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 1.321583] usb 3-1: Product: Scarlett Solo USB
[ 1.321584] usb 3-1: Manufacturer: Focusrite
[ 1.321585] usb 3-1: SerialNumber: Y7D1J3F0A66336
[ 1.328483] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.328485] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.328805] hub 2-1:1.0: USB hub found
[ 1.328983] hub 2-1:1.0: 8 ports detected
[ 1.645489] usb 3-1: Focusrite Scarlett Gen 2/3 Mixer Driver disabled; use options snd_usb_audio vid=0x1235 pid=0x8211 device_setup=1 to enable and report any issues to g@b4.vu
[ 1.646377] usb-storage 3-1:1.4: USB Mass Storage device detected
[ 1.646617] scsi host6: usb-storage 3-1:1.4
[ 1.657121] Console: switching to colour frame buffer device 170x48
[ 1.684487] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 1.684756] usb 2-1.8: new high-speed USB device number 3 using ehci-pci
[ 1.685505] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 870 2B6Q PQ: 0 ANSI: 5
[ 1.686217] ata1.00: Enabling discard_zeroes_data
[ 1.686656] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 1.687074] sd 0:0:0:0: [sda] Write Protect is off
[ 1.687495] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.687504] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.687950] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1.688580] ata1.00: Enabling discard_zeroes_data
[ 1.691013] sda: sda1 sda2 sda3
[ 1.691649] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.757644] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 1.771367] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6
[ 1.783013] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
[ 1.783562] EXT4-fs (sda3): write access will be enabled during recovery
[ 1.785089] usb 2-1.8: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00
[ 1.785557] usb 2-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.786253] hub 2-1.8:1.0: USB hub found
[ 1.786824] hub 2-1.8:1.0: 6 ports detected
[ 1.841423] tsc: Refined TSC clocksource calibration: 2793.654 MHz
[ 1.841887] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2844d5ba3f8, max_idle_ns: 440795222929 ns
[ 1.842388] clocksource: Switched to clocksource tsc
[ 2.024270] EXT4-fs (sda3): orphan cleanup on readonly fs
[ 2.031552] EXT4-fs (sda3): 8 orphan inodes deleted
[ 2.032012] EXT4-fs (sda3): recovery complete
[ 2.038516] EXT4-fs (sda3): mounted filesystem with ordered data mode. Quota mode: none.
[ 2.038989] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
[ 2.039678] devtmpfs: mounted
[ 2.040324] Freeing unused kernel image (initmem) memory: 948K
[ 2.078136] Write protecting the kernel read-only data: 18432k
[ 2.079008] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 2.079548] Freeing unused kernel image (rodata/data gap) memory: 420K
[ 2.079974] Run /sbin/init as init process
[ 2.080400] with arguments:
[ 2.080401] /sbin/init
[ 2.080401] with environment:
[ 2.080402] HOME=/
[ 2.080402] TERM=linux
[ 2.080403] BOOT_IMAGE=/vmlinuz-6.1.12-gentoo+
[ 2.324749] random: crng init done
[ 2.668370] scsi 6:0:0:0: Direct-Access Scarlett Welcome Disk 0.10 PQ: 0 ANSI: 2
[ 2.669163] sd 6:0:0:0: [sdb] 384 512-byte logical blocks: (197 kB/192 KiB)
[ 2.669730] sd 6:0:0:0: [sdb] Write Protect is on
[ 2.670147] sd 6:0:0:0: [sdb] Mode Sense: 04 00 90 00
[ 2.670262] sd 6:0:0:0: [sdb] No Caching mode page found
[ 2.670648] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2.675437] sdb: sdb1
[ 2.676132] sd 6:0:0:0: ioctl_internal_command return code = 2
[ 2.676555] sd 6:0:0:0: Sense Key : 0x0 [current]
[ 2.676925] sd 6:0:0:0: ASC=0x3a ASCQ=0x0
[ 2.677339] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.059528] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 3.059532] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 3.059532] thinkpad_acpi: ThinkPad BIOS G1ETC2WW (2.82 ), EC G1HT35WW
[ 3.059533] thinkpad_acpi: Lenovo ThinkPad T430, model 2342CTO
[ 3.059927] thinkpad_acpi: radio switch found; radios are disabled
[ 3.059932] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 3.059933] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 3.061948] thinkpad_acpi: warning: userspace override of important firmware LEDs is enabled
[ 3.068433] thinkpad_acpi: battery 1 registered (start 0, stop 100, behaviours: 0x7)
[ 3.068537] ACPI: battery: new extension: ThinkPad Battery Extension
[ 3.076349] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input11
[ 3.077189] e1000e: Intel(R) PRO/1000 Network Driver
[ 3.077191] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 3.077343] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 3.080591] Intel(R) Wireless WiFi driver for Linux
[ 3.081390] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.091368] Loading firmware: iwlwifi-6000g2a-6.ucode
[ 3.091500] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 6000g2a-6.ucode op_mode iwldvm
[ 3.092295] sd 6:0:0:0: ioctl_internal_command return code = 2
[ 3.092300] sd 6:0:0:0: Sense Key : 0x0 [current]
[ 3.092302] sd 6:0:0:0: ASC=0x3a ASCQ=0x0
[ 3.097813] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 3.097818] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 3.097819] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 3.097821] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 3.110840] videodev: Linux video capture interface: v2.00
[ 3.111564] iwlwifi 0000:03:00.0: reporting RF_KILL (radio disabled)
[ 3.111584] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
[ 3.113242] v4l2loopback_dc: loading out-of-tree module taints kernel.
[ 3.113478] v4l2loopback driver version 0.6.3 (droidcam) loaded
[ 3.130602] sd 6:0:0:0: ioctl_internal_command return code = 2
[ 3.130607] sd 6:0:0:0: Sense Key : 0x0 [current]
[ 3.130609] sd 6:0:0:0: ASC=0x3a ASCQ=0x0
[ 3.134951] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 3.136760] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[ 3.203913] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 3.308687] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:d6:34:f6
[ 3.308692] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 3.308749] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 3.312508] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 3.411480] usb 2-1.8.1: new high-speed USB device number 4 using ehci-pci
[ 3.511973] usb 2-1.8.1: New USB device found, idVendor=18d1, idProduct=4ee7, bcdDevice= 4.14
[ 3.511986] usb 2-1.8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.511990] usb 2-1.8.1: Product: POCO X3 Pro
[ 3.511993] usb 2-1.8.1: Manufacturer: Xiaomi
[ 3.511996] usb 2-1.8.1: SerialNumber: ef7b3f64
[ 3.968945] EXT4-fs (sda3): re-mounted. Quota mode: none.
[ 3.974744] EXT4-fs (sda3): re-mounted. Quota mode: none.
[ 4.024046] Adding 33554428k swap on /dev/sda2. Priority:-2 extents:1 across:33554428k SS
[ 4.293874] elogind-daemon[1638]: New seat seat0.
[ 4.294495] elogind-daemon[1638]: Watching system buttons on /dev/input/event2 (Power Button)
[ 4.294916] elogind-daemon[1638]: Watching system buttons on /dev/input/event0 (Lid Switch)
[ 4.294984] elogind-daemon[1638]: Watching system buttons on /dev/input/event1 (Sleep Button)
[ 4.295251] elogind-daemon[1638]: Watching system buttons on /dev/input/event4 (AT Translated Set 2 keyboard)
[ 4.295326] elogind-daemon[1638]: Watching system buttons on /dev/input/event10 (ThinkPad Extra Buttons)
[ 7.520766] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 11.684895] elogind-daemon[1638]: New session c1 of user vitaly.
[ 24.020494] usb 2-1.8.1: USB disconnect, device number 4
[ 24.514768] usb 2-1.8.1: new high-speed USB device number 5 using ehci-pci
[ 24.626118] usb 2-1.8.1: New USB device found, idVendor=2717, idProduct=ff18, bcdDevice= 4.14
[ 24.626125] usb 2-1.8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 24.626128] usb 2-1.8.1: Product: POCO X3 Pro
[ 24.626130] usb 2-1.8.1: Manufacturer: Xiaomi
[ 24.626132] usb 2-1.8.1: SerialNumber: ef7b3f64
[ 1566.411563] i915 0000:00:02.0: [drm] *ERROR* uncleared fifo underrun on pipe C
[ 1566.411568] i915 0000:00:02.0: [drm] *ERROR* CPU pipe C FIFO underrun
[ 1566.411578] i915 0000:00:02.0: [drm] *ERROR* uncleared pch fifo underrun on pch transcoder C
[ 1566.411579] i915 0000:00:02.0: [drm] *ERROR* PCH transcoder C FIFO underrun
[12726.482586] i915 0000:00:02.0: [drm] *ERROR* uncleared fifo underrun on pipe B
[12726.482595] i915 0000:00:02.0: [drm] *ERROR* CPU pipe B FIFO underrun
[12726.482608] i915 0000:00:02.0: [drm] *ERROR* uncleared pch fifo underrun on pch transcoder B
[12726.482610] i915 0000:00:02.0: [drm] *ERROR* PCH transcoder B FIFO underrun
[12760.847999] i915 0000:00:02.0: [drm] *ERROR* fifo underrun on pipe C
[12760.848032] i915 0000:00:02.0: [drm] *ERROR* pch fifo underrun on pch transcoder C
[12760.853837] i915 0000:00:02.0: [drm] *ERROR* pch fifo underrun on pch transcoder C
[12760.857085] i915 0000:00:02.0: [drm] *ERROR* pch fifo underrun on pch transcoder C
[17598.703425] i915 0000:00:02.0: [drm] *ERROR* fifo underrun on pipe C
[17598.703433] i915 0000:00:02.0: [drm] *ERROR* pch fifo underrun on pch transcoder C
[17598.720125] i915 0000:00:02.0: [drm] *ERROR* pch fifo underrun on pch transcoder C
[25158.155180] telegram-deskto[28352]: segfault at 40 ip 000000000668f04f sp 00007fffb58e6e90 error 6 in telegram-desktop[720000+6073000] likely on CPU 7 (core 3, socket 0)
[25158.155192] Code: 41 40 48 8b 43 40 48 8b 4b 48 48 89 48 48 48 8b 43 40 48 8b 4b 48 48 8b 49 40 48 89 4b 48 48 8b 48 48 48 89 41 40 48 8b 43 48 <48> 89 58 40 eb 1b 48 8b 43 40 49 89 86 a0 25 00 00 48 39 d8 75 b2
[31272.528308] elogind-daemon[1638]: Suspending system...
[31272.528322] PM: suspend entry (s2idle)
[31272.612487] Filesystems sync: 0.084 seconds
[31272.612691] Freezing user space processes ... (elapsed 0.001 seconds) done.
[31272.614568] OOM killer disabled.
[31272.614569] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[31272.617850] printk: Suspending console(s) (use no_console_suspend to debug)
[31272.627574] e1000e: EEE TX LPI TIMER: 00000011
[31272.687650] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[31272.687773] sd 0:0:0:0: [sda] Stopping disk
[31272.955452] ACPI: EC: interrupt blocked
[61680.824554] ACPI: EC: interrupt unblocked
[61680.892241] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
[61680.892379] sd 0:0:0:0: [sda] Starting disk
[61681.207224] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[61681.211597] ata1.00: ACPI cmd f5/00:00:00:00:00:a0(SECURITY FREEZE LOCK) filtered out
[61681.211610] ata1.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out
[61681.211977] ata1.00: supports DRM functions and may not be fully accessible
[61681.215824] ata1.00: ACPI cmd f5/00:00:00:00:00:a0(SECURITY FREEZE LOCK) filtered out
[61681.215836] ata1.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out
[61681.216116] ata1.00: supports DRM functions and may not be fully accessible
[61681.219283] ata1.00: configured for UDMA/133
[61681.219604] ata1.00: Enabling discard_zeroes_data
[61681.219919] OOM killer enabled.
[61681.219921] Restarting tasks ... done.
[61681.222938] random: crng reseeded on system resumption
[61681.234498] PM: suspend exit
[61681.234519] elogind-daemon[1638]: System resumed.
[61687.463282] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[68048.719192] tun: Universal TUN/TAP device driver, 1.6
[77713.892082] i915 0000:00:02.0: [drm] *ERROR* uncleared fifo underrun on pipe B
[77713.892089] i915 0000:00:02.0: [drm] *ERROR* CPU pipe B FIFO underrun
[77713.892098] i915 0000:00:02.0: [drm] *ERROR* uncleared pch fifo underrun on pch transcoder B
[77713.892100] i915 0000:00:02.0: [drm] *ERROR* PCH transcoder B FIFO underrun
[85025.355272] i915 0000:00:02.0: [drm] *ERROR* uncleared fifo underrun on pipe C
[85025.355280] i915 0000:00:02.0: [drm] *ERROR* CPU pipe C FIFO underrun
[85025.355291] i915 0000:00:02.0: [drm] *ERROR* uncleared pch fifo underrun on pch transcoder C
[85025.355292] i915 0000:00:02.0: [drm] *ERROR* PCH transcoder C FIFO underrun
[99770.942106] elogind-daemon[1638]: New session c2 of user vitaly.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment