necemamicumu.py

import time
import sys
import os
import digitalio
import board
from PIL import Image, ImageDraw, ImageFont
from datetime import datetime
import adafruit_rgb_display.ili9341 as ili9341
import adafruit_rgb_display.st7789 as st7789  # pylint: disable=unused-import
import adafruit_rgb_display.hx8357 as hx8357  # pylint: disable=unused-import
import adafruit_rgb_display.st7735 as st7735  # pylint: disable=unused-import
import adafruit_rgb_display.ssd1351 as ssd1351  # pylint: disable=unused-import
import adafruit_rgb_display.ssd1331 as ssd1331  # pylint: disable=unused-import

# Configuration for CS and DC pins (these are PiTFT defaults):
cs_pin = digitalio.DigitalInOut(board.CE0)
dc_pin = digitalio.DigitalInOut(board.D25)
reset_pin = digitalio.DigitalInOut(board.D24)
 
# Config for display baudrate (default max is 24mhz):
BAUDRATE = 24000000
 
# Setup SPI bus using hardware SPI:
spi = board.SPI()
 
disp = ili9341.ILI9341(
    spi,
    rotation=90,  # 2.2", 2.4", 2.8", 3.2" ILI9341
    cs=cs_pin,
    dc=dc_pin,
    rst=reset_pin,
    baudrate=BAUDRATE,
)
# pylint: enable=line-too-long
 


def main():

    # Create blank image for drawing.
    # Make sure to create image with mode 'RGB' for full color.
    if disp.rotation % 180 == 90:
        height = disp.width  # we swap height/width to rotate it to landscape!
        width = disp.height
    else:
        width = disp.width  # we swap height/width to rotate it to landscape!
        height = disp.height
     
    image = Image.new("RGB", (width, height))
    text = Image.new("RGB", (width, height))
     
    # Get drawing object to draw on image.
    draw = ImageDraw.Draw(image)
    write = ImageDraw.Draw(text)
     
    # Draw a black filled box to clear the image.
#    draw.rectangle((0, 0, width, height), outline=0, fill=(0, 0, 0))
#    disp.image(image)
     
    font = ImageFont.truetype("/usr/share/fonts/truetype/dejavu/DejaVuSans.ttf", 64)

    while True:
        # Draw a black filled box to clear the image.
        draw.rectangle((0, 0, width, height), outline=0, fill=0)

            # Draw text.
        image = Image.open("/home/pi/pidi/test.jpg")
        image = image.resize((200, 200), Image.BICUBIC)
#        image = image.crop((10, 50, 150, 200))

        write.text((0,0), "Jebem ti mater", font=font, fill="YELLOW")

        # Draw the image buffer.
        disp.image(text)
        disp.image(image)


        # Pause briefly before drawing next frame.
        time.sleep(1)
        

if __name__ == "__main__":
    main()