rc switch send+receive

c

/*
  Example for receiving
  
  https://github.com/sui77/rc-switch/
  
  If you want to visualize a telegram copy the raw data and 
  paste it into http://test.sui.li/oszi/
*/

#include <RCSwitch.h>

RCSwitch mySwitch = RCSwitch();

void setup() {
  Serial.begin(115200);
  mySwitch.enableReceive(4);  // Receiver on interrupt 0 => that is pin #2 (for UNO)
}

void loop() {
  if (mySwitch.available()) {
    output(mySwitch.getReceivedValue(), mySwitch.getReceivedBitlength(), mySwitch.getReceivedDelay(), mySwitch.getReceivedRawdata(),mySwitch.getReceivedProtocol());
    mySwitch.resetAvailable();
  }
}

/*
char a = "100100010011000011000001"; // pulse length 352, protocol 1
char b = "100100010011000011000010"; // pulse length 352, protocol 1
char c = "100100010011000011000100"; // pulse length 352, protocol 1
char d = "100100010011000011001000"; // pulse length 352, protocol 1

void setup() {
  Serial.begin(9600);
  
  // Transmitter is connected to Arduino Pin #10  
  mySwitch.enableTransmit(10);

  // Optional set pulse length.
  mySwitch.setPulseLength(REPLACE_WITH_YOUR_PULSE_LENGTH);
  
  // Optional set protocol (default is 1, will work for most outlets)
  mySwitch.setProtocol(REPLACE_WITH_YOUR_PROTOCOL);
  
  // Optional set number of transmission repetitions.
  // mySwitch.setRepeatTransmit(15);
}

void loop() {
  // Binary code - button 3
  mySwitch.send("000101010101000101010101");
  delay(1000);  
  mySwitch.send("000101010101000101010100");
  delay(1000);
  
  // Binary code - button 4
  mySwitch.send("000101010101010001010101");
  delay(1000);  
  mySwitch.send("000101010101010001010100");
  delay(1000);
}
*/