bergmannjg

Building a react native app in WSL2

Install, build and debug a react native app in WSL2 (Windows Subsystem for Linux) and Ubuntu.

• Install tools in Windows
• Install tools in WSL2
• Connect to android hardware device from WSL2
• Connect to android virtual device in Windows
  • Start android virtual device in Windows
• Start adb server in Windows

ffund

#!/bin/bash

apt-get update  # update list of available software  
apt-get -y install git cmake libusb-1.0-0-dev python python-pip python-dev
apt-get -y install python-scipy python-numpy python-matplotlib


# Remove other RTL-SDR driver, if it is loaded
modprobe -r dvb_usb_rtl28xxu

igrr

/*
    OTA update over HTTPS
    
    As an example, we download and install ESP8266Basic firmware from github.
    
    Requires latest git version of the core (November 17, 2015)
    
    Created by Ivan Grokhotkov, 2015.
    This example is in public domain.
*/

janjongboom

This does NOT work on Raspberry Pi 2!

0. Obtain a 8GB (or bigger) SD Card
1. Download disk image from http://janos.io/builds/fxos-pi-gpio.img.zip and unzip
2. Put SD card in your computer
3. Find out where your SD card is mounted (BE REALLY SURE ITS THE RIGHT DEVICE, IT WILL BE WIPED COMPLETELY!!!), f.e. /dev/disk5 on OSX
4. On Linux, run: sudo dd bs=4M if=fxos-pi-gpio.img of=/path/to/your/disk
5. On OSX, run: sudo dd bs=4m if=fxos-pi-gpio.img of=/dev/rdisk5 (do rdisk, not disk here!)
6. When it's done put it in your Pi and start up
7. The demo's are wired like this: yellow LED on GPIO2, red LED on GPIO3, button (wire it as pulldown) on GPIO26.

mhawksey

/*   
   Copyright 2011 Martin Hawksey

   Licensed under the Apache License, Version 2.0 (the "License");
   you may not use this file except in compliance with the License.
   You may obtain a copy of the License at

       http://www.apache.org/licenses/LICENSE-2.0

   Unless required by applicable law or agreed to in writing, software