gistfile1.txt

..DDR V1.05 4bit PCB 2eef4a672d huan.he 23/04/14-10:58:56
LP4/4x derate disable, other dram:1x trefi
ddrconfig:15
DDR3, 324MHz
BW=32 Col=11 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=4096MB
tdqss: cs0 dqs0: 626ps, dqs1: 530ps, dqs2: 723ps, dqs3: 771ps, 

change to: 324MHz
clk skew:0x5f

change to: 528MHz
clk skew:0x5f

change to: 666MHz
clk skew:0x5f

change to: 786MHz(final freq)
clk skew:0x5f
PHY drv:clk:50,ca:28,DQ:40,odt:145
vrefinner:50%, vrefout:50%
dram drv:34,odt:60
cs 0:
the read training result:
DQS0:0x54, DQS1:0x55, DQS2:0x53, DQS3:0x4d, 
min  : 0x7  0x8  0x7  0x6  0x5  0x1  0x1  0x9 , 0xb  0xb  0x7  0x6  0x2  0x0  0x2  0x3 ,
       0x8  0x6  0x4  0x9  0x6  0x7  0x5  0x1 , 0x0  0x7  0x9  0x2  0xc  0x7  0x8  0x7 ,
mid  :0x2d 0x2f 0x2d 0x2c 0x2d 0x28 0x27 0x2d ,0x32 0x33 0x2e 0x2c 0x29 0x28 0x28 0x27 ,
      0x2b 0x2d 0x29 0x31 0x2c 0x2a 0x2d 0x28 ,0x24 0x2d 0x30 0x27 0x33 0x2c 0x2f 0x2c ,
max  :0x53 0x57 0x53 0x52 0x55 0x4f 0x4d 0x52 ,0x5a 0x5b 0x55 0x52 0x50 0x50 0x4e 0x4c ,
      0x4e 0x54 0x4f 0x59 0x53 0x4e 0x55 0x50 ,0x49 0x54 0x57 0x4c 0x5b 0x52 0x56 0x52 ,
range:0x4c 0x4f 0x4c 0x4c 0x50 0x4e 0x4c 0x49 ,0x4f 0x50 0x4e 0x4c 0x4e 0x50 0x4c 0x49 ,
      0x46 0x4e 0x4b 0x50 0x4d 0x47 0x50 0x4f ,0x49 0x4d 0x4e 0x4a 0x4f 0x4b 0x4e 0x4b ,
the write training result:
DQS0:0x9d, DQS1:0x94, DQS2:0xa7, DQS3:0xac, 
min  :0x83 0x89 0x88 0x87 0x88 0x7c 0x7e 0x86 0x82 ,0x7b 0x7b 0x7a 0x79 0x71 0x71 0x72 0x71 0x78 ,
      0x8c 0x91 0x8e 0x8e 0x8f 0x8a 0x89 0x8e 0x8e ,0x90 0x96 0x97 0x8f 0x9a 0x91 0x97 0x92 0x96 ,
mid  :0x9b 0xa1 0xa0 0x9e 0xa1 0x94 0x94 0x9a 0x9c ,0x96 0x97 0x94 0x93 0x8d 0x8c 0x8c 0x8a 0x95 ,
      0xa0 0xa9 0xa4 0xa4 0xa6 0x9f 0xa1 0xa5 0xa9 ,0xa8 0xb0 0xb2 0xa9 0xb4 0xab 0xb0 0xac 0xb0 ,
max  :0xb3 0xb9 0xb8 0xb6 0xba 0xac 0xaa 0xaf 0xb6 ,0xb2 0xb4 0xaf 0xad 0xa9 0xa7 0xa6 0xa4 0xb2 ,
      0xb4 0xc2 0xba 0xbb 0xbd 0xb4 0xb9 0xbd 0xc4 ,0xc1 0xca 0xce 0xc4 0xce 0xc5 0xca 0xc7 0xcb ,
range:0x30 0x30 0x30 0x2f 0x32 0x30 0x2c 0x29 0x34 ,0x37 0x39 0x35 0x34 0x38 0x36 0x34 0x33 0x3a ,
      0x28 0x31 0x2c 0x2d 0x2e 0x2a 0x30 0x2f 0x36 ,0x31 0x34 0x37 0x35 0x34 0x34 0x33 0x35 0x35 ,
out
U-Boot SPL board init
U-Boot SPL 2017.09-g0fbedd0675-230404 #zyf (Apr 11 2023 - 09:25:18)
unknown raw ID 0 0 0
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
No misc partition
spl: partition error
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00080000 ... sha256(cc61149bc7...) + OK
## Checking uboot 0x00200000 ... sha256(7bf45c021d...) + OK
## Checking fdt 0x00313828 ... sha256(929a29dd65...) + OK
## Checking atf-2 0xfe48d000 ... sha256(63ede63c1e...) + OK
## Checking atf-3 0xfe490000 ... sha256(922a3e8dc5...) + OK
## Checking optee 0x08400000 ... sha256(a8137e7e9e...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00080000)
Total: 435.675 ms

INFO:    Preloader serial: 0
NOTICE:  BL31: v2.3():v2.3-623-g7bfd76051:cl
NOTICE:  BL31: Built : 05:11:46, Jul 21 2023
INFO:    rk_otp_init finish!
INFO:    ARM GICv2 driver initialized
INFO:    nonboot_cpus_off: clst_st=0xc0e, core_st=0xe1e0 boot_cpu=0
INFO:    dfs DDR fsp_param[0].freq_mhz= 786MHz
INFO:    dfs DDR fsp_param[1].freq_mhz= 324MHz
INFO:    dfs DDR fsp_param[2].freq_mhz= 528MHz
INFO:    dfs DDR fsp_param[3].freq_mhz= 666MHz
INFO:    idle_st=0x0, pd_st=0x0
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 1
INFO:    rk_otp_init finish!
INFO:    RK3528 SoC (0x101)
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
I/TC: 
I/TC: OP-TEE version: 3.13.0-689-gc73fd5531 #troy.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #1 Wed Apr 12 16:49:22 CST 2023 aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09 (Aug 16 2023 - 21:55:06 +0200)

Model: Rockchip RK3528 Evaluation Board
MPIDR: 0x80000000
PreSerial: 0, raw, 0xff9f0000
DRAM:  3.9 GiB
Sysmem: init
Relocation Offset: f9a4c000
Relocation fdt: f79fa510 - f79fece8
CR: M/C/I
Using default environment

DM: v2
no mmc device at slot 1
mmc@ffbf0000: 0, mmc@ffc30000: 1 (SD)
Bootdev(atags): mmc 1
MMC1: Legacy, 52Mhz
PartType: EFI
No misc partition
boot mode: None
FIT: No boot partition
Failed to load DTB, ret=-19
No valid DTB, ret=-22
Failed to get kernel dtb, ret=-22
Model: Rockchip RK3528 Evaluation Board
MPIDR: 0x80000000
rockchip_set_serialno: could not find efuse/otp device
CLK: (sync kernel. arm: enter 600000 KHz, init 1200000 KHz, kernel 0N/A)
  apll 600000 KHz
  gpll 1188000 KHz
  cpll 996000 KHz
  dpll 393000 KHz
  ppll 1000000 KHz
  clk_50m 49800 KHz
  clk_100m 99600 KHz
  clk_150m 148500 KHz
  clk_200m 198000 KHz
  clk_250m 249000 KHz
  clk_300m 297000 KHz
  clk_339m 339428 KHz
  clk_400m 396000 KHz
  clk_500m 498000 KHz
  clk_600m 594000 KHz
  clk_ppll_50m 50000 KHz
  clk_ppll_100m 500000 KHz
  clk_ppll_125m 125000 KHz
No misc partition
Net:   No ethernet found.
Hit key to stop autoboot('CTRL+C'):  0 
Could not find misc partition
ANDROID: reboot reason: "(none)"
optee api revision: 2.0
TEEC: Waring: Could not find security partition
Not AVB images, AVB skip
android_image_load_by_partname: Can't find part: boot
Android image load failed
Android boot failed, error -1.
## Booting FIT Image FIT: No boot partition
FIT: No fit blob
FIT: No FIT image
Unknown command 'bootrkp' - try 'help'
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:2...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
reading /extlinux/extlinux.conf
566 bytes read in 4 ms (137.7 KiB/s)
1:.MiniMyth2
Retrieving file: /Image
reading /Image
32852480 bytes read in 2638 ms (11.9 MiB/s)
append: root=/dev/mmcblk0p3 rw rootwait earlycon=uart8250,mmio32,0xff9f0000 console=ttyS0,1500000n8 clk_ignore_unused debug
Retrieving file: /dtbs/rockchip/rk3528-vontar-r3.dtb
reading /dtbs/rockchip/rk3528-vontar-r3.dtb
40726 bytes read in 8 ms (4.9 MiB/s)
Fdt Ramdisk skip relocation
No misc partition
## Flattened Device Tree blob at 0x08300000
   Booting using the fdt blob at 0x08300000
   Using Device Tree in place at 0000000008300000, end 000000000830cf15
can't found rockchip,drm-logo, use rockchip,fb-logo
WARNING: could not set reg FDT_ERR_BADOFFSET.
failed to reserve fb-loader-logo memory
WARNING: could not set reg FDT_ERR_BADOFFSET.
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x08c00000 - 0xfc000000 (size: 0xf3400000)
Total: 3533.634/4054.143 ms

Starting kernel ...

[    0.000000] efi: UEFI not found.
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x00000000fbffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
[    0.000000]   node   0: [mem 0x0000000008c00000-0x00000000fbffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000fbffffff]
[    0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[    0.000000] On node 0, zone DMA: 2048 pages in unavailable ranges
[    0.000000] On node 0, zone DMA: 16384 pages in unavailable ranges
[    0.000000] cma: Reserved 64 MiB at 0x00000000f3400000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] No bootconfig data provided, so skipping bootconfig
[    0.000000] percpu: Embedded 30 pages/cpu s85544 r8192 d29144 u122880
[    0.000000] pcpu-alloc: s85544 r8192 d29144 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: root=/dev/mmcblk0p3 rw rootwait earlycon=uart8250,mmio32,0xff9f0000 console=ttyS0,1500000n8 clk_ignore_unused debug
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1013512
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 3939772K/4118528K available (15040K kernel code, 3538K rwdata, 6432K rodata, 6912K init, 574K bss, 113220K reserved, 65536K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 51301 entries in 201 pages
[    0.000000] ftrace: allocated 201 pages with 4 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: .RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] .Trampoline variant of Tasks RCU enabled.
[    0.000000] .Rude variant of Tasks RCU enabled.
[    0.000000] .Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001378] Console: colour dummy device 80x25
[    0.001863] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    0.002806] pid_max: default: 32768 minimum: 301
[    0.003343] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.004037] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.005688] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.006941] cblist_init_generic: Setting adjustable number of callback queues.
[    0.007612] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.008254] cblist_init_generic: Setting adjustable number of callback queues.
[    0.008947] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.009584] cblist_init_generic: Setting adjustable number of callback queues.
[    0.010246] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.010999] rcu: Hierarchical SRCU implementation.
[    0.011440] rcu: .Max phase no-delay instances is 1000.
[    0.013811] EFI services will not be available.
[    0.014676] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
[    0.016357] Detected VIPT I-cache on CPU1
[    0.016447] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.017829] Detected VIPT I-cache on CPU2
[    0.017911] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.019285] Detected VIPT I-cache on CPU3
[    0.019371] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.019477] smp: Brought up 1 node, 4 CPUs
[    0.022751] SMP: Total of 4 processors activated.
[    0.023185] CPU features: detected: 32-bit EL0 Support
[    0.023655] CPU features: detected: 32-bit EL1 Support
[    0.024128] CPU features: detected: CRC32 instructions
[    0.024656] CPU: All CPU(s) started at EL2
[    0.025041] alternatives: applying system-wide alternatives
[    0.027174] devtmpfs: initialized
[    0.036664] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.037580] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.039834] pinctrl core: initialized pinctrl subsystem
[    0.040928] DMI not present or invalid.
[    0.041726] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.043723] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.044545] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.045483] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.046270] audit: initializing netlink subsys (disabled)
[    0.047024] audit: type=2000 audit(0.046:1): state=initialized audit_enabled=0 res=1
[    0.048264] thermal_sys: Registered thermal governor 'fair_share'
[    0.048274] thermal_sys: Registered thermal governor 'bang_bang'
[    0.048833] thermal_sys: Registered thermal governor 'step_wise'
[    0.049382] thermal_sys: Registered thermal governor 'user_space'
[    0.049998] cpuidle: using governor ladder
[    0.050969] cpuidle: using governor menu
[    0.051477] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.052198] ASID allocator initialised with 65536 entries
[    0.053293] Serial: AMBA PL011 UART driver
[    0.065820] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.066991] rockchip-gpio ff610000.gpio: probed /pinctrl/gpio@ff610000
[    0.068007] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.069094] rockchip-gpio ffaf0000.gpio: probed /pinctrl/gpio@ffaf0000
[    0.070056] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.071149] rockchip-gpio ffb00000.gpio: probed /pinctrl/gpio@ffb00000
[    0.072122] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.073245] rockchip-gpio ffb10000.gpio: probed /pinctrl/gpio@ffb10000
[    0.074211] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.075327] rockchip-gpio ffb20000.gpio: probed /pinctrl/gpio@ffb20000
[    0.079949] cryptd: max_cpu_qlen set to 1000
[    0.080982] ACPI: Interpreter disabled.
[    0.081914] iommu: Default domain type: Translated 
[    0.082376] iommu: DMA domain TLB invalidation policy: strict mode 
[    0.083569] SCSI subsystem initialized
[    0.084117] usbcore: registered new interface driver usbfs
[    0.084648] usbcore: registered new interface driver hub
[    0.085201] usbcore: registered new device driver usb
[    0.086247] pps_core: LinuxPPS API ver. 1 registered
[    0.086704] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.087549] PTP clock support registered
[    0.088271] scmi_core: SCMI protocol bus registered
[    0.089099] Advanced Linux Sound Architecture Driver Initialized.
[    0.090733] clocksource: Switched to clocksource arch_sys_counter
[    0.091806] pnp: PnP ACPI: disabled
[    0.100122] NET: Registered PF_INET protocol family
[    0.100849] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.104374] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.105195] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.105912] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.106818] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.108252] TCP: Hash tables configured (established 32768 bind 32768)
[    0.109021] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.109701] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.110545] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.111578] RPC: Registered named UNIX socket transport module.
[    0.112131] RPC: Registered udp transport module.
[    0.112562] RPC: Registered tcp transport module.
[    0.112990] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.113581] NET: Registered PF_XDP protocol family
[    0.114031] PCI: CLS 0 bytes, default 64
[    0.114710] kvm [1]: IPA Size Limit: 40 bits
[    0.116411] kvm [1]: vgic interrupt IRQ9
[    0.116802] kvm [1]: Hyp mode initialized successfully
[    0.885191] Initialise system trusted keyrings
[    0.885890] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    0.886582] zbud: loaded
[    0.887275] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.888275] NFS: Registering the id_resolver key type
[    0.888772] Key type id_resolver registered
[    0.889158] Key type id_legacy registered
[    0.889550] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.890165] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.922192] NET: Registered PF_ALG protocol family
[    0.922653] Key type asymmetric registered
[    0.923031] Asymmetric key parser 'x509' registered
[    0.923479] Asymmetric key parser 'pkcs8' registered
[    0.923935] Key type pkcs7_test registered
[    0.924380] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.925251] io scheduler mq-deadline registered
[    0.925671] io scheduler kyber registered
[    0.926057] io scheduler bfq registered
[    0.935321] EINJ: ACPI disabled.
[    0.942363] dma-pl330 ffd60000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.943074] dma-pl330 ffd60000.dma-controller: .DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    0.947594] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.950532] printk: console [ttyS0] disabled
[    0.951046] ff9f0000.serial: ttyS0 at MMIO 0xff9f0000 (irq = 29, base_baud = 1500000) is a 16550A
[    0.951981] printk: console [ttyS0] enabled
[    0.951981] printk: console [ttyS0] enabled
[    0.952735] printk: bootconsole [uart8250] disabled
[    0.952735] printk: bootconsole [uart8250] disabled
[    0.965073] Serial: AMBA driver
[    0.976175] rk_gmac-dwmac ffbd0000.ethernet: IRQ eth_lpi not found
[    0.976867] rk_gmac-dwmac ffbd0000.ethernet: PTP uses main clock
[    0.977468] rk_gmac-dwmac ffbd0000.ethernet: supply phy not found, using dummy regulator
[    0.978329] rk_gmac-dwmac ffbd0000.ethernet: clock input or output? (input).
[    0.978950] rk_gmac-dwmac ffbd0000.ethernet: Can not read property: tx_delay.
[    0.979573] rk_gmac-dwmac ffbd0000.ethernet: set tx_delay to 0x30
[    0.980109] rk_gmac-dwmac ffbd0000.ethernet: Can not read property: rx_delay.
[    0.980745] rk_gmac-dwmac ffbd0000.ethernet: set rx_delay to 0x10
[    0.981291] rk_gmac-dwmac ffbd0000.ethernet: integrated PHY? (yes).
[    0.981892] rk_gmac-dwmac ffbd0000.ethernet: clock input from PHY
[    0.987449] rk_gmac-dwmac ffbd0000.ethernet: init for RMII
[    1.094288] rk_gmac-dwmac ffbd0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    1.094927] rk_gmac-dwmac ffbd0000.ethernet: .DWMAC4/5
[    1.095381] rk_gmac-dwmac ffbd0000.ethernet: DMA HW capability register supported
[    1.096036] rk_gmac-dwmac ffbd0000.ethernet: RX Checksum Offload Engine supported
[    1.096689] rk_gmac-dwmac ffbd0000.ethernet: TX Checksum insertion supported
[    1.097304] rk_gmac-dwmac ffbd0000.ethernet: Wake-Up On Lan supported
[    1.097970] rk_gmac-dwmac ffbd0000.ethernet: TSO supported
[    1.098453] rk_gmac-dwmac ffbd0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    1.099155] rk_gmac-dwmac ffbd0000.ethernet: Enabled RFS Flow TC (entries=10)
[    1.099783] rk_gmac-dwmac ffbd0000.ethernet: TSO feature enabled
[    1.100308] rk_gmac-dwmac ffbd0000.ethernet: SPH feature enabled
[    1.100847] rk_gmac-dwmac ffbd0000.ethernet: Using 40/40 bits DMA host/device width
[    1.106452] usbcore: registered new interface driver uas
[    1.106963] usbcore: registered new interface driver usb-storage
[    1.108344] mousedev: PS/2 mouse device common for all mice
[    1.112642] sdhci: Secure Digital Host Controller Interface driver
[    1.113200] sdhci: Copyright(c) Pierre Ossman
[    1.113821] Synopsys Designware Multimedia Card Interface Driver
[    1.115421] dwmmc_rockchip ffc30000.mmc: IDMAC supports 32-bit address mode.
[    1.115829] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.116079] dwmmc_rockchip ffc30000.mmc: Using internal DMA controller.
[    1.117127] dwmmc_rockchip ffc30000.mmc: Version ID is 270a
[    1.117706] dwmmc_rockchip ffc30000.mmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo
[    1.119001] ledtrig-cpu: registered to indicate activity on CPUs
[    1.120340] scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16
[    1.121800] arm-scmi firmware:scmi: SCMI RAW Mode initialized for instance 0
[    1.122433] arm-scmi firmware:scmi: SCMI RAW Mode COEX enabled !
[    1.123063] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    1.123683] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    1.126897] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    1.129751] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    1.131476] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.134541] NET: Registered PF_PACKET protocol family
[    1.135225] Key type dns_resolver registered
[    1.144943] registered taskstats version 1
[    1.145472] Loading compiled-in X.509 certificates
[    1.146184] zswap: loaded using pool lzo/zbud
[    1.184020] mmc_host mmc0: Bus speed (slot 0) = 24900000Hz (slot req 25000000Hz, actual 24900000HZ div = 0)
[    1.184950] mmc0: new SDHC card at address 0001
[    1.186318] mmcblk0: mmc0:0001 EB1QT 29.8 GiB 
[    1.188998] Internal error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP
[    1.189734] Modules linked in:
[    1.190011] CPU: 1 PID: 21 Comm: kworker/1:0 Not tainted 6.4.11 #2
[    1.190556] Hardware name: Vontar R3 (DT)
[    1.190909] Workqueue: pm genpd_power_off_work_fn
[    1.191131] clk: Not disabling unused clocks
[    1.191339] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    1.191722] ALSA device list:
[    1.192316] pc : regmap_mmio_read32le+0x10/0x30
[    1.192578]   No soundcards found.
[    1.192969] lr : regmap_mmio_read+0x48/0x78
[    1.193635] sp : ffff80000a19bba0
[    1.193638] x29: ffff80000a19bba0 x28: 0000000000000000 x27: 0000000000000000
[    .193648] x26: ffff800009be79c0 x25: ffff0000fb78e905 x24: 0000000000000080
[    1.195176] x23: 0000000047395f44 x22: ffff000002608000 x21: ffff80000a19bcb4
[    1.195191] dw-apb-uart ff9f0000.serial: forbid DMA for kernel console
[    1.195805] x20: 0000000000001120 x19: ffff0000026d5f80 x18: ffffffffffffffff
[    1.196381] SError Interrupt on CPU2, code 0x00000000bf000000 -- SError
[    1.196388] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.4.11 #2
[    1.196393] Hardware name: Vontar R3 (DT)
[    1.196397] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    1.196402] pc : preempt_count_sub+0x10/0xe0
[    1.196413] lr : _raw_spin_unlock_irqrestore+0x24/0x68
[    1.196420] sp : ffff80000a00b8e0
[    1.196422] x29: ffff80000a00b8e0 x28: ffff0000039de660 x27: 0000000000000002
[    1.196431] x26: ffff000003966b80 x25: ffff0000039de668 x24: 0000000000000000
[    1.196438] x23: ffff000003888280 x22: 00000000016e3600 x21: 0000000000000001
[    1.196446] x20: 0000000000000000 x19: ffff0000003c2080 x18: ffffffffffffffff
[    1.196453] x17: ffff800009e62a58 x16: ffff800009e629e8 x15: 0000000000000006
[    1.196461] x14: 0000000000000000 x13: 656c6f736e6f6320 x12: 6c656e72656b2072
[    1.196468] x11: 6f6620414d442064 x10: 6962726f66203a6c x9 : ffff800008ea219c
[    1.196476] x8 : ffff80000a00b878 x7 : 0000000000000000 x6 : 312e31202020205b
[    1.196483] x5 : 00000000000000c0 x4 : 0000000040004000 x3 : 0000000000000003
[    1.196490] x2 : 0000000040004000 x1 : 0000000000000001 x0 : 0000000000000001
[    1.196499] Kernel panic - not syncing: Asynchronous SError Interrupt
[    1.196502] SMP: stopping secondary CPUs
[    1.196997] x17: ffff800009e62a58 x16: ffff800009e629e8 x15: ffffffffffffffff
[    1.199047] x14: ffff80000a19bdf8 x13: ffff8000093f1d98 x12: 64706e65675f6d70
[    1.200782] x11: 0000000df47998d8 x10: 0000000000000ae0 x9 : ffff8000089b5a90
[    1.203267] x8 : ffff80000a19bb68 x7 : 0000000000000000 x6 : 0000000007e78140
[    1.205753] x5 : ffff8000089b5a48 x4 : 0000000000001120 x3 : 0000000000001120
[    1.207899] x2 : ffff8000089b5fb0 x1 : 0000000000001120 x0 : ffff80000a037120
[    1.210385] Call trace:
[    1.211008]  regmap_mmio_read32le+0x10/0x30
[    1.211228]  _regmap_bus_reg_read+0x78/0xc0
[    1.211604]  _regmap_read+0x64/0x198
[    1.211974]  regmap_read+0x50/0x80
[    1.212293]  rockchip_pmu_set_idle_request+0x9c/0x1e8
[    1.212600]  rockchip_pd_power+0x1c8/0x2f0
[    1.213046]  rockchip_pd_power_off+0x18/0x28
[    1.213410]  _genpd_power_off+0x94/0x178
[    1.213791]  genpd_power_off.isra.0+0x134/0x258
[    1.214140]  genpd_power_off_work_fn+0x38/0x60
[    1.214543]  process_one_work+0x1c0/0x448
[    1.214938]  worker_thread+0x70/0x408
[    1.215293]  kthread+0xf4/0x108
[    1.215619]  ret_from_fork+0x10/0x20
[    1.215906] Code: aa1e03e9 d503201f f9400000 8b214000 (b9400000) 
[    1.216753] ---[ end trace 0000000000000000 ]---
[    1.217159] note: kworker/1:0[21] exited with irqs disabled
[    1.217651] Kernel Offset: disabled
[    1.217652] CPU features: 0x0000000,00000800,0000421b
[    1.217656] Memory Limit: none
[    1.218670] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]---