waynema02/debian-wvdial-ppp0-interface-autossh.markdown

## debian-wvdial-ppp0-interface-autossh.markdown

      
    Raw
  

              debian-wvdial-ppp0-interface-autossh.markdown
            
          
    Reverse proxy over 3G modem (draft)

We will explain how to configure a cubieboard running debian as a reverese proxy.
The modules that will be used are wvdial and autossh
Credits goes to:
1. http://blog.rootshell.be/2015/02/19/my-little-pwnie-box/
2. https://wiki.archlinux.org/index.php/3G_and_GPRS_modems_with_pppd
3. http://blog.stalkr.net/2010/11/login-notifications-pamexec-scripting.html


Configure wvdial


Then edit your configuration to match your mobile operator requirements.
$ pico /etc/wvdial.conf
Mine looks like this:
	[Dialer Defaults]
	New PPPD = yes
	Dial Command = ATDT
	Dial Attempts = 1
	Modem = /dev/ttyUSB0
	Modem Type = Analog Modem
	ISDN = 0
	Baud = 460800
	Username = user
	Password = pass
	Init1 = ATZ
	Init2 = AT&F E1 V1 X1 &D2 &C1 S0=0
	Init3 = AT+CGDCONT=1,"IP","internet"
	Phone = *99#
	Stupid Mode = 1
	Check Def Route = yes
	Auto Reconnect = yes
	
	[Dialer wind]
	Username = web
	Password = web
	Init3 = AT+CGDCONT=1,"IP","gint.b-online.gr"
	
	[Dialer cosmote]
	Init3 = AT+CGDCONT=1,"IP","internet"
	
	[Dialer vodafone]
	Init3 = AT+CGDCONT=1,"IP","internet"
	
	[Dialer MF636]
	Modem = /dev/ttyUSB2
	
	[Dialer E169]
	Modem = /dev/ttyUSB0
	
	[Dialer E170]
	Modem = /dev/ttyUSB0
	
	[Dialer E220]
	Modem = /dev/ttyUSB0
	
	[Dialer 0]
	Modem = /dev/ttyUSB0
	
	[Dialer 1]
	Modem = /dev/ttyUSB1
	
	[Dialer 2]
	Modem = /dev/ttyUSB2


Start 3G connection at boot time.


It’s easy with debian, add the following lines in your /etc/network/interfaces file:
$ pico /etc/network/interfaces
TIP: place the below lines above eth0 so as to be the default one
	# start 3G connection
	# pre-up
	#   wait for at max 20 seconds before connecting for the 3G stick to become connected at [ttyUSB0, ttyUSB1, ttyUSB2]
	#   3G stick might not be available immediately
	#   wait 30 more seconds for the 3G connection to become active

	auto ppp0
	iface ppp0 inet wvdial
	  provider vodafone
	  pre-up /etc/ppp/wait-dialup-hardware ttyUSB0 20
	  pre-up /etc/ppp/wait-dialup-hardware ttyUSB1 20
	  pre-up /etc/ppp/wait-dialup-hardware ttyUSB2 20
	  pre-up sleep 30
	  post-up echo "3G (ppp0) is online"


Add scripts that waits for USB to be connected on boot


During boot the USB Dongle is not always available at the moment the network interfaces comes up. For that reason add this file that is being used from step 2 /etc/network/interfaces file.
$ pico /etc/ppp/wait-dialup-hardware
The file needs to have the below contents:
	#!/bin/bash
	#INTERFACE="/dev/$(head -1 /etc/ppp/options-mobile)"
	INTERFACE="/dev/$1"
	MAX_SECONDS_TIMEOUT=$2

	dsec=$((${MAX_SECONDS_TIMEOUT} * 10))
	for ((retry=0; retry < ${dsec}; retry++))
	do
	    if [ -c ${INTERFACE} ]; then
	        echo "$0: OK existing required device ${INTERFACE} (in $((retry / 10)).$((100 * (retry % 10) / 10)) seconds)"
	        logger "$0: OK existing required device ${INTERFACE} (in $((retry / 10)).$((100 * (retry % 10) / 10)) seconds)"
	        break
	    else
	        sleep 0.1
	    fi
	done
	if [ ! -c ${INTERFACE} ]; then
	    echo "$0: ERROR timeout waiting for required device ${INTERFACE}"
	    logger "$0: ERROR timeout waiting for required device ${INTERFACE}"
	    exit 1
	fi


Add route for ppp0 on connection


The 3G USB modem is connected but one problem remains: If the Ethernet interface was already up with a default gateway, then no new default route will be added via the ppp0 interface. To fix this, the following file has to be modified: /etc/ppp/peers/wvdial.
$ pico /etc/ppp/peers/wvdial
The modified file looks like this:
	noauth
	name wvdial
	usepeerdns
	defaultroute
	replacedefaultroute


Setup an Autossh deamon


For setting up a deamon for autossh you can use this script that will create a service that will run on boot. You only have to set the script configuration values and call it.
Helper scripts for maintaining the connection always up


Add script that checks if 3G connection is active


$ pico /home/username/check-wan-status
The file needs to have the below contents:
	#!/bin/sh
	# 
	# Restart network interfaces
	# if ppp0 3G connection is down
	
	PING="/bin/ping -q -c1 -W 10 -I ppp0"
	HOST=8.8.8.8
	
	${PING} ${HOST}
	if [ $? -ne 0 ]; then
	        echo "3G (ppp0) network connection is down! Attempting reconnection."

		/sbin/ifdown --force ppp0
		sleep 10
		/sbin/ifup --force ppp0
		sleep 10
	fi


Add script that check autossh status


$ pico /home/username/autossh-keep-alive
Please change the AUTOSSH_SERVICE_NAME with the name that you have set at step #5.
The file needs to have the below contents:
	#!/bin/bash
	TUNNEL="/usr/sbin/service AUTOSSH_SERVICE_NAME"
	SSH_PATH="/usr/bin/ssh"
	
	SSH_USER="autossh"
	SSH_SERVER="example.com"
	REMOTE_PORT="4444"
	
	${TUNNEL} status
	if [ $? -ne 0 ]; then
	  echo "NO AUTOSSH DAEMON ACTIVE"
	  
	  ${TUNNEL} start
	
	else
	
	  exist=`ps aux | grep ${SSH_PATH} | grep ${SSH_USER}@${SSH_SERVER} | grep ${REMOTE_PORT}`
	  if ! test -n "$exist"; then
	  	echo "Autossh deamon exists, but ssh connection is not established! Restarting autossh deamon"
	  
	    ${TUNNEL} restart
	  fi
	
	fi


Add these files in crontab


$ crontab -e
Add the following in the crontab file:
*/10 * * * * /home/username/check-wan-status
*/10 * * * * /home/username/autossh-keep-alive


Update ClientAliveInterval server side


The ClientAliveInterval default is 600 which means that the connection will not be checked if it is open for 600 seconds. Usually after a minute the connection will be inactive with a broken pipe.
For that reason we have to add ClientAliveInterval to the sshd_config on server with:
$ echo "ClientAliveInterval 60" | sudo tee -a /etc/ssh/sshd_config
Then restart the ssh deamon:
$ service ssh restart

Update ServerAliveInterval client side


The ServerAliveInterval default is 600 which means that the connection will not be checked if it is open for 600 seconds. Usually after a minute the connection will be inactive with a broken pipe.
For that reason, you can do one of the below things:


set on your user profile settings:
$ echo "ServerAliveInterval 60" >> ~/.ssh/config
$ echo "ServerAliveCountMax 120" >> ~/.ssh/config

TIP: ServerAliveCountMax 120 makes the SSH connection stays alive longer.


or edit the ssh_config on server with:
$ pico /etc/ssh/ssh_config
and add below lines:
	ServerAliveInterval 60
	ServerAliveCountMax 120

Then restart the ssh deamon:
$ service ssh restart


Get notified on client autossh connect/disconnect


Install modules for sending out emails


$ apt-get install mailx
$ apt-get install mailutils

Call our scirpt which sends email on connect/disconnect using pam_exec


$ pico /etc/pam.d/sshd
Add the below line in file:
	session    optional     pam_exec.so /home/autossh/notify-login


Add script that sends out email based on PAM env


$ touch /home/autossh/notify-login
$ chmod +X /home/autossh/notify-login
$ pico /home/autossh/notify-login
The file needs to have the below contents:
	#!/bin/sh
	
	# send email only for autossh user
	[ "$PAM_USER" = "autossh" ] || exit 0
	
	# when ssh opens
	if [  "$PAM_TYPE" = "open_session" ]; then
	  {
	    echo "LOGIN"
	    echo ""
	    echo "User: $PAM_USER"
	    echo "Ruser: $PAM_RUSER"
	    echo "Rhost: $PAM_RHOST"
	    echo "Service: $PAM_SERVICE"
	    echo "TTY: $PAM_TTY"
	    echo "Date: `date`"
	    echo "Server: `uname -a`"
	  } | mail -s "Alert: Autossh Access LOGIN from `hostname -s` $PAM_SERVICE login: $PAM_USER" root
	fi
	
	# when ssh disconnects
	if [  "$PAM_TYPE" = "close_session" ]; then
	  {
	    echo "LOGOUT"
	    echo ""
	    echo "User: $PAM_USER"
	    echo "Ruser: $PAM_RUSER"
	    echo "Rhost: $PAM_RHOST"
	    echo "Service: $PAM_SERVICE"
	    echo "TTY: $PAM_TTY"
	    echo "Date: `date`"
	    echo "Server: `uname -a`"
	  } | mail -s "Alert: Autossh Access LOGOUT from `hostname -s` $PAM_SERVICE login: $PAM_USER" root
	fi