-
-
Save wildjerry/4381ea1c77e2c7504bd935d188583b78 to your computer and use it in GitHub Desktop.
FreeCAD logs
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Msg: FreeCAD 0.19, Libs: 0.19R | |
© Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2021 | |
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license. | |
FreeCAD wouldn't be possible without FreeCAD community. | |
##### #### ### #### | |
# # # # # # | |
# ## #### #### # # # # # | |
#### # # # # # # # ##### # # | |
# # #### #### # # # # # | |
# # # # # # # # # ## ## ## | |
# # #### #### ### # # #### ## ## ## | |
Log: Time = Thu Jul 7 20:38:55 2022 | |
Log: AppDataSkipVendor = true | |
Log: AppHomePath = /usr/lib/freecad/ | |
Log: AppIcon = freecad | |
Log: AppTempPath = /tmp/ | |
Log: BinPath = /usr/lib/freecad/bin/ | |
Log: BuildRepositoryURL = https://code.launchpad.net/~vcs-imports/freecad/trunk | |
Log: BuildRevision = | |
Log: BuildRevisionDate = 2021/03/17 08:48:24 | |
Log: BuildVersionMajor = 0 | |
Log: BuildVersionMinor = 19 | |
Log: Console = 0 | |
Log: CopyrightInfo = © Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2021 | |
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license. | |
FreeCAD wouldn't be possible without FreeCAD community. | |
##### #### ### #### | |
# # # # # # | |
# ## #### #### # # # # # | |
#### # # # # # # # ##### # # | |
# # #### #### # # # # # | |
# # # # # # # # # ## ## ## | |
# # #### #### ### # # #### ## ## ## | |
Log: Debug = 0 | |
Log: DocPath = /usr/lib/freecad/doc/ | |
Log: ExeName = FreeCAD | |
Log: ExeVendor = FreeCAD | |
Log: ExeVersion = 0.19 | |
Log: LoggingConsole = 1 | |
Log: LoggingFile = 1 | |
Log: LoggingFileName = /home/ubuntu/.FreeCAD/FreeCAD.log | |
Log: MaintainerUrl = http://www.freecadweb.org/wiki/Main_Page | |
Log: PATH = /home/ubuntu/anaconda3/condabin:/home/ubuntu/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/snap/bin | |
Log: PYTHONPATH = | |
Log: PythonSearchPath = /usr/lib/python39.zip:/usr/lib/python3.9:/usr/lib/python3.9/lib-dynload | |
Log: RunMode = Gui | |
Log: SplashAlignment = Bottom|Left | |
Log: SplashInfoColor = #c8c8c8 | |
Log: SplashScreen = freecadsplash | |
Log: SplashTextColor = #ffffff | |
Log: StartWorkbench = StartWorkbench | |
Log: SystemParameter = /home/ubuntu/.FreeCAD/system.cfg | |
Log: UserAppData = /home/ubuntu/.FreeCAD/ | |
Log: UserHomePath = /home/ubuntu | |
Log: UserParameter = /home/ubuntu/.FreeCAD/user.cfg | |
Log: Verbose = | |
Log: Create Application | |
Log: Run App init script | |
Log: Init: starting App::FreeCADInit.py | |
Log: Init: Searching for modules... | |
Log: Init: Initializing /usr/share/freecad/Mod/Raytracing... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Tux(Init.py not found)... ignore | |
Log: Init: Initializing /usr/share/freecad/Mod/Path... done | |
Log: Init: Initializing /usr/share/freecad/Mod/AddonManager... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Image... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Idf... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Fem... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Material... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Spreadsheet... done | |
Log: Init: Initializing /usr/share/freecad/Mod/OpenSCAD... done | |
Log: Init: Initializing /usr/share/freecad/Mod/MeshPart... done | |
Log: Init: Initializing /usr/share/freecad/Mod/PartDesign... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Test... done | |
Log: Init: Initializing /usr/share/freecad/Mod/ReverseEngineering... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Web... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Robot... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Show(Init.py not found)... ignore | |
Log: Init: Initializing /usr/share/freecad/Mod/Sketcher... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Points... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Arch... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Start... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Surface... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Measure... done | |
Log: Drawing became obsolete in 0.17; consider using TechDraw instead. | |
Log: Init: Initializing /usr/share/freecad/Mod/Drawing... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Draft... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Inspection... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Part... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Mesh... done | |
Log: Init: Initializing /usr/share/freecad/Mod/TechDraw... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Import... done | |
Log: Using /usr/share/freecad/Mod as module path! | |
Log: System path after init: | |
Log: /usr/lib/freecad/bin | |
Log: /usr/share/freecad/Mod/Raytracing | |
Log: /usr/share/freecad/Mod/Tux | |
Log: /usr/share/freecad/Mod/Path | |
Log: /usr/share/freecad/Mod/AddonManager | |
Log: /usr/share/freecad/Mod/Image | |
Log: /usr/share/freecad/Mod/Idf | |
Log: /usr/share/freecad/Mod/Fem | |
Log: /usr/share/freecad/Mod/Material | |
Log: /usr/share/freecad/Mod/Spreadsheet | |
Log: /usr/share/freecad/Mod/OpenSCAD | |
Log: /usr/share/freecad/Mod/MeshPart | |
Log: /usr/share/freecad/Mod/PartDesign | |
Log: /usr/share/freecad/Mod/Test | |
Log: /usr/share/freecad/Mod/ReverseEngineering | |
Log: /usr/share/freecad/Mod/Web | |
Log: /usr/share/freecad/Mod/Robot | |
Log: /usr/share/freecad/Mod/Show | |
Log: /usr/share/freecad/Mod/Sketcher | |
Log: /usr/share/freecad/Mod/Points | |
Log: /usr/share/freecad/Mod/Arch | |
Log: /usr/share/freecad/Mod/Start | |
Log: /usr/share/freecad/Mod/Surface | |
Log: /usr/share/freecad/Mod/Measure | |
Log: /usr/share/freecad/Mod/Drawing | |
Log: /usr/share/freecad/Mod/Draft | |
Log: /usr/share/freecad/Mod/Inspection | |
Log: /usr/share/freecad/Mod/Part | |
Log: /usr/share/freecad/Mod/Mesh | |
Log: /usr/share/freecad/Mod/TechDraw | |
Log: /usr/share/freecad/Mod/Import | |
Log: /home/ubuntu/anaconda3/condabin | |
Log: /home/ubuntu/.local/bin | |
Log: /usr/local/sbin | |
Log: /usr/local/bin | |
Log: /usr/sbin | |
Log: /usr/bin | |
Log: /sbin | |
Log: /bin | |
Log: /usr/games | |
Log: /usr/local/games | |
Log: /snap/bin | |
Log: /snap/bin | |
Log: Init: App::FreeCADInit.py done | |
Log: Init: Creating Gui::Application and QApplication | |
Log: Local server 'FreeCAD' started | |
Log: OpenGL version is: 4.5 (4.5 (Compatibility Profile) Mesa 21.2.6) | |
Log: Run Gui init script | |
Log: Init: Running FreeCADGuiInit.py start script... | |
Log: Init: Searching modules... | |
Log: Init: Initializing /usr/share/freecad/Mod/Raytracing... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Tux... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Path... done | |
Log: Init: Initializing /usr/share/freecad/Mod/AddonManager... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Image... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Idf(InitGui.py not found)... ignore | |
Log: Init: Initializing /usr/share/freecad/Mod/Fem... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Material... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Spreadsheet... done | |
Log: Init: Initializing /usr/share/freecad/Mod/OpenSCAD... done | |
Log: Init: Initializing /usr/share/freecad/Mod/MeshPart... done | |
Log: Init: Initializing /usr/share/freecad/Mod/PartDesign... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Test... done | |
Log: Init: Initializing /usr/share/freecad/Mod/ReverseEngineering... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Web... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Robot... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Show(InitGui.py not found)... ignore | |
Log: Init: Initializing /usr/share/freecad/Mod/Sketcher... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Points... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Arch... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Start... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Surface... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Measure(InitGui.py not found)... ignore | |
Log: Init: Initializing /usr/share/freecad/Mod/Drawing... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Draft... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Inspection... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Part... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Mesh... done | |
Log: Init: Initializing /usr/share/freecad/Mod/TechDraw... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Import... done | |
Log: Init: Loading FreeCAD GUI | |
Log: Init: Running FreeCADGuiInit.py start script... done | |
Log: Init: Activating default workbench StartWorkbench | |
Log: Loading GUI of Web module... done | |
Log: Loading GUI of Start module... done | |
Log: Loading Start module... done | |
Log: Init: Showing main window | |
Log: Main window restored | |
Log: Show main window | |
Log: Toolbars restored | |
Log: Couldn't connect to spacenav daemon. Please ignore if you don't have a spacemouse. | |
Log: Init: Entering event loop | |
Log: Init: Processing command line files | |
Wrn: GitPython not found. Using standard download instead. | |
Log: Hide main window | |
Log: Finish: Event loop left | |
Log: Destruct Gui::Application | |
Log: Couldn't disconnect from spacenav daemon | |
Log: FreeCAD terminating... | |
Log: Saving system parameter... | |
Log: Saving system parameter...done | |
Log: Saving user parameter... | |
Log: Saving user parameter...done |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Msg: FreeCAD 0.19, Libs: 0.19R | |
© Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2021 | |
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license. | |
FreeCAD wouldn't be possible without FreeCAD community. | |
##### #### ### #### | |
# # # # # # | |
# ## #### #### # # # # # | |
#### # # # # # # # ##### # # | |
# # #### #### # # # # # | |
# # # # # # # # # ## ## ## | |
# # #### #### ### # # #### ## ## ## | |
Log: Time = Wed Jul 13 15:48:26 2022 | |
Log: AppDataSkipVendor = true | |
Log: AppHomePath = /usr/lib/freecad/ | |
Log: AppIcon = freecad | |
Log: AppTempPath = /tmp/ | |
Log: BinPath = /usr/lib/freecad/bin/ | |
Log: BuildRepositoryURL = https://code.launchpad.net/~vcs-imports/freecad/trunk | |
Log: BuildRevision = | |
Log: BuildRevisionDate = 2022/02/14 17:05:44 | |
Log: BuildVersionMajor = 0 | |
Log: BuildVersionMinor = 19 | |
Log: Console = 0 | |
Log: CopyrightInfo = © Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2021 | |
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license. | |
FreeCAD wouldn't be possible without FreeCAD community. | |
##### #### ### #### | |
# # # # # # | |
# ## #### #### # # # # # | |
#### # # # # # # # ##### # # | |
# # #### #### # # # # # | |
# # # # # # # # # ## ## ## | |
# # #### #### ### # # #### ## ## ## | |
Log: Debug = 0 | |
Log: DocPath = /usr/lib/freecad/doc/ | |
Log: ExeName = FreeCAD | |
Log: ExeVendor = FreeCAD | |
Log: ExeVersion = 0.19 | |
Log: LoggingConsole = 1 | |
Log: LoggingFile = 1 | |
Log: LoggingFileName = /home/wildjerry/.FreeCAD/FreeCAD.log | |
Log: MaintainerUrl = http://www.freecadweb.org/wiki/Main_Page | |
Log: PATH = /usr/lib/freecad/bin:/usr/share/freecad/Mod/TechDraw:/usr/share/freecad/Mod/OpenSCAD:/usr/share/freecad/Mod/Material:/usr/share/freecad/Mod/Start:/usr/share/freecad/Mod/Sketcher:/usr/share/freecad/Mod/ReverseEngineering:/usr/share/freecad/Mod/PartDesign:/usr/share/freecad/Mod/Raytracing:/usr/share/freecad/Mod/Inspection:/usr/share/freecad/Mod/Mesh:/usr/share/freecad/Mod/Measure:/usr/share/freecad/Mod/Web:/usr/share/freecad/Mod/Robot:/usr/share/freecad/Mod/Part:/usr/share/freecad/Mod/AddonManager:/usr/share/freecad/Mod/Idf:/usr/share/freecad/Mod/Spreadsheet:/usr/share/freecad/Mod/Image:/usr/share/freecad/Mod/Fem:/usr/share/freecad/Mod/Show:/usr/share/freecad/Mod/Points:/usr/share/freecad/Mod/Import:/usr/share/freecad/Mod/Path:/usr/share/freecad/Mod/Tux:/usr/share/freecad/Mod/MeshPart:/usr/share/freecad/Mod/Test:/usr/share/freecad/Mod/Arch:/usr/share/freecad/Mod/Draft:/usr/share/freecad/Mod/Drawing:/usr/share/freecad/Mod/Surface:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/snap/bin | |
Log: PYTHONPATH = | |
Log: PythonSearchPath = /usr/lib/python310.zip:/usr/lib/python3.10:/usr/lib/python3.10/lib-dynload | |
Log: RunMode = Gui | |
Log: SplashAlignment = Bottom|Left | |
Log: SplashInfoColor = #c8c8c8 | |
Log: SplashScreen = freecadsplash | |
Log: SplashTextColor = #ffffff | |
Log: StartWorkbench = StartWorkbench | |
Log: SystemParameter = /home/wildjerry/.FreeCAD/system.cfg | |
Log: UserAppData = /home/wildjerry/.FreeCAD/ | |
Log: UserHomePath = /home/wildjerry | |
Log: UserParameter = /home/wildjerry/.FreeCAD/user.cfg | |
Log: Verbose = | |
Log: Create Application | |
Log: Run App init script | |
Log: Init: starting App::FreeCADInit.py | |
Log: Init: Searching for modules... | |
Log: Init: Initializing /usr/share/freecad/Mod/TechDraw... done | |
Log: Init: Initializing /usr/share/freecad/Mod/OpenSCAD... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Material... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Start... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Sketcher... done | |
Log: Init: Initializing /usr/share/freecad/Mod/ReverseEngineering... done | |
Log: Init: Initializing /usr/share/freecad/Mod/PartDesign... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Raytracing... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Inspection... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Mesh... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Measure... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Web... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Robot... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Part... done | |
Log: Init: Initializing /usr/share/freecad/Mod/AddonManager... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Idf... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Spreadsheet... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Image... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Fem... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Show(Init.py not found)... ignore | |
Log: Init: Initializing /usr/share/freecad/Mod/Points... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Import... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Path... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Tux(Init.py not found)... ignore | |
Log: Init: Initializing /usr/share/freecad/Mod/MeshPart... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Test... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Arch... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Draft... done | |
Log: Drawing became obsolete in 0.17; consider using TechDraw instead. | |
Log: Init: Initializing /usr/share/freecad/Mod/Drawing... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Surface... done | |
Log: Using /usr/share/freecad/Mod as module path! | |
Log: System path after init: | |
Log: /usr/lib/freecad/bin | |
Log: /usr/share/freecad/Mod/TechDraw | |
Log: /usr/share/freecad/Mod/OpenSCAD | |
Log: /usr/share/freecad/Mod/Material | |
Log: /usr/share/freecad/Mod/Start | |
Log: /usr/share/freecad/Mod/Sketcher | |
Log: /usr/share/freecad/Mod/ReverseEngineering | |
Log: /usr/share/freecad/Mod/PartDesign | |
Log: /usr/share/freecad/Mod/Raytracing | |
Log: /usr/share/freecad/Mod/Inspection | |
Log: /usr/share/freecad/Mod/Mesh | |
Log: /usr/share/freecad/Mod/Measure | |
Log: /usr/share/freecad/Mod/Web | |
Log: /usr/share/freecad/Mod/Robot | |
Log: /usr/share/freecad/Mod/Part | |
Log: /usr/share/freecad/Mod/AddonManager | |
Log: /usr/share/freecad/Mod/Idf | |
Log: /usr/share/freecad/Mod/Spreadsheet | |
Log: /usr/share/freecad/Mod/Image | |
Log: /usr/share/freecad/Mod/Fem | |
Log: /usr/share/freecad/Mod/Show | |
Log: /usr/share/freecad/Mod/Points | |
Log: /usr/share/freecad/Mod/Import | |
Log: /usr/share/freecad/Mod/Path | |
Log: /usr/share/freecad/Mod/Tux | |
Log: /usr/share/freecad/Mod/MeshPart | |
Log: /usr/share/freecad/Mod/Test | |
Log: /usr/share/freecad/Mod/Arch | |
Log: /usr/share/freecad/Mod/Draft | |
Log: /usr/share/freecad/Mod/Drawing | |
Log: /usr/share/freecad/Mod/Surface | |
Log: /usr/lib/freecad/bin | |
Log: /usr/share/freecad/Mod/TechDraw | |
Log: /usr/share/freecad/Mod/OpenSCAD | |
Log: /usr/share/freecad/Mod/Material | |
Log: /usr/share/freecad/Mod/Start | |
Log: /usr/share/freecad/Mod/Sketcher | |
Log: /usr/share/freecad/Mod/ReverseEngineering | |
Log: /usr/share/freecad/Mod/PartDesign | |
Log: /usr/share/freecad/Mod/Raytracing | |
Log: /usr/share/freecad/Mod/Inspection | |
Log: /usr/share/freecad/Mod/Mesh | |
Log: /usr/share/freecad/Mod/Measure | |
Log: /usr/share/freecad/Mod/Web | |
Log: /usr/share/freecad/Mod/Robot | |
Log: /usr/share/freecad/Mod/Part | |
Log: /usr/share/freecad/Mod/AddonManager | |
Log: /usr/share/freecad/Mod/Idf | |
Log: /usr/share/freecad/Mod/Spreadsheet | |
Log: /usr/share/freecad/Mod/Image | |
Log: /usr/share/freecad/Mod/Fem | |
Log: /usr/share/freecad/Mod/Show | |
Log: /usr/share/freecad/Mod/Points | |
Log: /usr/share/freecad/Mod/Import | |
Log: /usr/share/freecad/Mod/Path | |
Log: /usr/share/freecad/Mod/Tux | |
Log: /usr/share/freecad/Mod/MeshPart | |
Log: /usr/share/freecad/Mod/Test | |
Log: /usr/share/freecad/Mod/Arch | |
Log: /usr/share/freecad/Mod/Draft | |
Log: /usr/share/freecad/Mod/Drawing | |
Log: /usr/share/freecad/Mod/Surface | |
Log: /usr/local/sbin | |
Log: /usr/local/bin | |
Log: /usr/sbin | |
Log: /usr/bin | |
Log: /sbin | |
Log: /bin | |
Log: /usr/games | |
Log: /usr/local/games | |
Log: /snap/bin | |
Log: /snap/bin | |
Log: Init: App::FreeCADInit.py done | |
Log: Init: Creating Gui::Application and QApplication | |
Log: Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use QT_QPA_PLATFORM=wayland to run on Wayland anyway. | |
Log: Local server 'FreeCAD' started | |
Log: OpenGL version is: 4.5 (4.5 (Compatibility Profile) Mesa 22.0.1) | |
Log: Run Gui init script | |
Log: Init: Running FreeCADGuiInit.py start script... | |
Log: Init: Searching modules... | |
Log: Init: Initializing /usr/share/freecad/Mod/TechDraw... done | |
Log: Init: Initializing /usr/share/freecad/Mod/OpenSCAD... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Material... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Start... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Sketcher... done | |
Log: Init: Initializing /usr/share/freecad/Mod/ReverseEngineering... done | |
Log: Init: Initializing /usr/share/freecad/Mod/PartDesign... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Raytracing... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Inspection... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Mesh... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Measure(InitGui.py not found)... ignore | |
Log: Init: Initializing /usr/share/freecad/Mod/Web... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Robot... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Part... done | |
Log: Init: Initializing /usr/share/freecad/Mod/AddonManager... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Idf(InitGui.py not found)... ignore | |
Log: Init: Initializing /usr/share/freecad/Mod/Spreadsheet... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Image... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Fem... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Show(InitGui.py not found)... ignore | |
Log: Init: Initializing /usr/share/freecad/Mod/Points... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Import... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Path... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Tux... done | |
Log: Init: Initializing /usr/share/freecad/Mod/MeshPart... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Test... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Arch... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Draft... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Drawing... done | |
Log: Init: Initializing /usr/share/freecad/Mod/Surface... done | |
Log: Init: Loading FreeCAD GUI | |
Log: Init: Running FreeCADGuiInit.py start script... done | |
Log: Init: Activating default workbench StartWorkbench | |
Log: Loading GUI of Web module... done | |
Log: Loading GUI of Start module... done | |
Log: Loading Start module... done | |
Log: Init: Showing main window | |
Log: Main window restored | |
Log: Show main window | |
Log: Toolbars restored | |
Log: Couldn't connect to spacenav daemon. Please ignore if you don't have a spacemouse. | |
Log: Init: Entering event loop | |
Log: Init: Processing command line files | |
Wrn: GitPython not found. Using standard download instead. | |
Log: Hide main window | |
Log: Finish: Event loop left | |
Log: Destruct Gui::Application | |
Log: Couldn't disconnect from spacenav daemon | |
Log: FreeCAD terminating... | |
Log: Saving system parameter... | |
Log: Saving system parameter...done | |
Log: Saving user parameter... | |
Log: Saving user parameter...done |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Msg: FreeCAD 0.20, Libs: 2022.625R14555 (Git shallow) | |
Log: Time = 2022-Jul-07 20:28:02 | |
Log: AboutImage = freecadabout | |
Log: AppDataSkipVendor = true | |
Log: AppHomePath = /snap/freecad-realthunder/47/usr/ | |
Log: AppIcon = freecad | |
Log: AppTempPath = /home/ubuntu/snap/freecad-realthunder/common/temp/ | |
Log: Application = FreeCAD Link Branch | |
Log: BinPath = /snap/freecad-realthunder/47/usr/bin/ | |
Log: BuildRepositoryURL = Unknown | |
Log: BuildRevision = 14555 (Git shallow) | |
Log: BuildRevisionBranch = (HEAD detached at 2022.06.25-edge) | |
Log: BuildRevisionDate = 20220625 | |
Log: BuildRevisionHash = 0191f4edf1b19bf52124a4be654074b5cc035645 | |
Log: BuildVersionMajor = 2022 | |
Log: BuildVersionMinor = 625 | |
Log: Console = 0 | |
Log: CopyrightInfo = | |
Log: Debug = 0 | |
Log: DocPath = /snap/freecad-realthunder/47/usr/doc/ | |
Log: ExeName = FreeCAD | |
Log: ExeVendor = FreeCAD | |
Log: ExeVersion = 0.20 | |
Log: LoggingConsole = 1 | |
Log: LoggingFile = 1 | |
Log: LoggingFileName = /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/FreeCAD.log | |
Log: MaintainerUrl = https://github.com/realthunder/FreeCAD | |
Log: PATH = /snap/freecad-realthunder/47/usr/sbin:/snap/freecad-realthunder/47/usr/bin:/snap/freecad-realthunder/47/sbin:/snap/freecad-realthunder/47/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/freecad-realthunder/47/kf5/usr/bin | |
Log: PYTHONPATH = | |
Log: PythonSearchPath = /snap/freecad-realthunder/47/usr/lib/python38.zip:/snap/freecad-realthunder/47/usr/lib/python3.8:/snap/freecad-realthunder/47/usr/lib/python3.8/lib-dynload | |
Log: RunMode = Gui | |
Log: SplashAlignment = Bottom|Left | |
Log: SplashInfoColor = #101010 | |
Log: SplashInfoExeName = FreeCAD Link Daily | |
Log: SplashInfoPosition = 12 38 | |
Log: SplashInfoVersion = 2022.06.25 | |
Log: SplashScreen = freecad_link_splash.png | |
Log: SplashTextColor = #000000 | |
Log: StartWorkbench = StartWorkbench | |
Log: SystemParameter = /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/link.system.cfg | |
Log: UserAppData = /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/ | |
Log: UserHomePath = /home/ubuntu/snap/freecad-realthunder/common | |
Log: UserParameter = /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/link.user.cfg | |
Log: VendorCFGPrefix = link. | |
Log: Verbose = | |
Log: WindowIcon = freecad_link.svg | |
Log: WindowTitle = FreeCAD Link Daily | |
Log: Create Application | |
Log: Run App init script | |
Log: Init: starting App::FreeCADInit.py | |
Log: Init: Searching for modules... | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/AddonManager... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Arch... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Assembly3(Init.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Draft... done | |
Log: Drawing became obsolete in 0.17; consider using TechDraw instead. | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Drawing... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Fem... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Idf... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Image... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Import... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Inspection... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Material... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Measure... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Mesh... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/MeshPart... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/OpenSCAD... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Part... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/PartDesign... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Path... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Plot(Init.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Points... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Raytracing... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/ReverseEngineering... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Robot... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Show(Init.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Sketcher... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/SnapSetup... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Spreadsheet... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Start... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Surface... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/TechDraw... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Test... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Tux(Init.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Web... done | |
Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/3D_Printing_Tools(Init.py not found)... ignore | |
Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/fcgear(Init.py not found)... ignore | |
Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/fasteners... done | |
Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/Rocket... done | |
Log: Init: Initializing freecad.fc_cadquery | |
Log: Module: Part | |
Log: Loading Part module... done | |
Log: Init: No init module found in freecad.fc_cadquery, skipping | |
Log: Init: Initializing freecad.gears | |
Log: Init: No init module found in freecad.gears, skipping | |
Log: Init: Initializing freecad.asm3 | |
Log: Init: No init module found in freecad.asm3, skipping | |
Log: Using /snap/freecad-realthunder/47/usr/Mod as module path! | |
Log: System path after init: | |
Log: /snap/freecad-realthunder/47/usr/bin | |
Log: /snap/freecad-realthunder/47/usr/Mod/AddonManager | |
Log: /snap/freecad-realthunder/47/usr/Mod/Arch | |
Log: /snap/freecad-realthunder/47/usr/Mod/Assembly3 | |
Log: /snap/freecad-realthunder/47/usr/Mod/Draft | |
Log: /snap/freecad-realthunder/47/usr/Mod/Drawing | |
Log: /snap/freecad-realthunder/47/usr/Mod/Fem | |
Log: /snap/freecad-realthunder/47/usr/Mod/Idf | |
Log: /snap/freecad-realthunder/47/usr/Mod/Image | |
Log: /snap/freecad-realthunder/47/usr/Mod/Import | |
Log: /snap/freecad-realthunder/47/usr/Mod/Inspection | |
Log: /snap/freecad-realthunder/47/usr/Mod/Material | |
Log: /snap/freecad-realthunder/47/usr/Mod/Measure | |
Log: /snap/freecad-realthunder/47/usr/Mod/Mesh | |
Log: /snap/freecad-realthunder/47/usr/Mod/MeshPart | |
Log: /snap/freecad-realthunder/47/usr/Mod/OpenSCAD | |
Log: /snap/freecad-realthunder/47/usr/Mod/Part | |
Log: /snap/freecad-realthunder/47/usr/Mod/PartDesign | |
Log: /snap/freecad-realthunder/47/usr/Mod/Path | |
Log: /snap/freecad-realthunder/47/usr/Mod/Plot | |
Log: /snap/freecad-realthunder/47/usr/Mod/Points | |
Log: /snap/freecad-realthunder/47/usr/Mod/Raytracing | |
Log: /snap/freecad-realthunder/47/usr/Mod/ReverseEngineering | |
Log: /snap/freecad-realthunder/47/usr/Mod/Robot | |
Log: /snap/freecad-realthunder/47/usr/Mod/Show | |
Log: /snap/freecad-realthunder/47/usr/Mod/Sketcher | |
Log: /snap/freecad-realthunder/47/usr/Mod/SnapSetup | |
Log: /snap/freecad-realthunder/47/usr/Mod/Spreadsheet | |
Log: /snap/freecad-realthunder/47/usr/Mod/Start | |
Log: /snap/freecad-realthunder/47/usr/Mod/Surface | |
Log: /snap/freecad-realthunder/47/usr/Mod/TechDraw | |
Log: /snap/freecad-realthunder/47/usr/Mod/Test | |
Log: /snap/freecad-realthunder/47/usr/Mod/Tux | |
Log: /snap/freecad-realthunder/47/usr/Mod/Web | |
Log: /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/3D_Printing_Tools | |
Log: /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/fcgear | |
Log: /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/fasteners | |
Log: /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/Rocket | |
Log: /snap/freecad-realthunder/47/usr/sbin | |
Log: /snap/freecad-realthunder/47/usr/bin | |
Log: /snap/freecad-realthunder/47/sbin | |
Log: /snap/freecad-realthunder/47/bin | |
Log: /usr/local/sbin | |
Log: /usr/local/bin | |
Log: /usr/sbin | |
Log: /usr/bin | |
Log: /sbin | |
Log: /bin | |
Log: /usr/games | |
Log: /usr/local/games | |
Log: /snap/freecad-realthunder/47/kf5/usr/bin | |
Log: Init: App::FreeCADInit.py done | |
Log: Init: Creating Gui::Application and QApplication | |
Log: Qt: Session management error: Could not open network socket | |
Log: Local server 'FreeCAD' started | |
Log: OpenGL version is: 4.5 (4.5 (Compatibility Profile) Mesa 21.2.6) | |
Log: Run Gui init script | |
Log: Init: Running FreeCADGuiInit.py start script... | |
Log: Init: Searching modules... | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/AddonManager... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Arch... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Assembly3(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Draft... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Drawing... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Fem... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Idf(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Image... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Import... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Inspection... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Material... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Measure(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Mesh... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/MeshPart... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/OpenSCAD... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Part... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/PartDesign... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Path... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Plot(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Points... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Raytracing... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/ReverseEngineering... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Robot... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Show(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Sketcher... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/SnapSetup(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Spreadsheet... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Start... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Surface... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/TechDraw... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Test... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Tux... done | |
Log: Init: Initializing /snap/freecad-realthunder/47/usr/Mod/Web... done | |
Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/3D_Printing_Tools... done | |
Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/fcgear(InitGui.py not found)... ignore | |
Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/fasteners... done | |
Log: Init: Initializing /home/ubuntu/snap/freecad-realthunder/common/.FreeCAD/Mod/Rocket... done | |
Log: Init: Initializing freecad.fc_cadquery | |
Log: Init: No init_gui module found in freecad.fc_cadquery, skipping | |
Log: Init: Initializing freecad.gears | |
Log: Init: Initializing freecad.gears... done | |
Log: Init: Initializing freecad.asm3 | |
Log: Init: Initializing freecad.asm3... done | |
Log: Init: Loading FreeCAD GUI | |
Log: Init: Running FreeCADGuiInit.py start script... done | |
Log: Init: Activating default workbench StartWorkbench | |
Log: Loading GUI of Web module... done | |
Log: Loading GUI of Start module... done | |
Log: Loading Start module... done | |
Log: Init: Showing main window | |
Log: Main window restored | |
Log: Show main window | |
Log: Toolbars restored | |
Log: Init: Entering event loop | |
Log: Couldn't connect to spacenav daemon. Please ignore if you don't have a spacemouse. | |
Log: Init: Entering event loop | |
Log: Init: Processing command line files | |
Log: Hide main window | |
Log: Finish: Event loop left | |
Log: Destruct Gui::Application | |
Log: Couldn't disconnect from spacenav daemon | |
Log: FreeCAD terminating... | |
Log: Saving system parameter... | |
Log: Saving system parameter...done | |
Log: Saving user parameter... | |
Log: Saving user parameter...done |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Msg: FreeCAD 0.20, Libs: 2022.712R14555 (Git shallow) | |
Log: Time = 2022-Jul-13 15:56:18 | |
Log: AboutImage = freecad_link_splash.png | |
Log: AppDataSkipVendor = true | |
Log: AppHomePath = /snap/freecad-realthunder/56/usr/ | |
Log: AppIcon = freecad | |
Log: AppTempPath = /home/wildjerry/snap/freecad-realthunder/common/temp/ | |
Log: Application = FreeCAD Link Branch | |
Log: BinPath = /snap/freecad-realthunder/56/usr/bin/ | |
Log: BuildRepositoryURL = Unknown | |
Log: BuildRevision = 14555 (Git shallow) | |
Log: BuildRevisionBranch = (HEAD detached at 2022.07.12-edge) | |
Log: BuildRevisionDate = 20220712 | |
Log: BuildRevisionHash = 8ce366738c70dde14b276f68f6e2f6a380eac004 | |
Log: BuildVersionMajor = 2022 | |
Log: BuildVersionMinor = 712 | |
Log: Console = 0 | |
Log: CopyrightInfo = | |
Log: Debug = 0 | |
Log: DocPath = /snap/freecad-realthunder/56/usr/doc/ | |
Log: ExeName = FreeCAD | |
Log: ExeVendor = FreeCAD | |
Log: ExeVersion = 0.20 | |
Log: LoggingConsole = 1 | |
Log: LoggingFile = 1 | |
Log: LoggingFileName = /home/wildjerry/snap/freecad-realthunder/common/.FreeCAD/FreeCAD.log | |
Log: MaintainerUrl = https://github.com/realthunder/FreeCAD | |
Log: PATH = /snap/freecad-realthunder/56/usr/sbin:/snap/freecad-realthunder/56/usr/bin:/snap/freecad-realthunder/56/sbin:/snap/freecad-realthunder/56/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/freecad-realthunder/56/kf5/usr/bin | |
Log: PYTHONPATH = | |
Log: PythonSearchPath = /snap/freecad-realthunder/56/usr/lib/python38.zip:/snap/freecad-realthunder/56/usr/lib/python3.8:/snap/freecad-realthunder/56/usr/lib/python3.8/lib-dynload | |
Log: RunMode = Gui | |
Log: SplashAlignment = Bottom|Left | |
Log: SplashGif = freecad_link_logo.gif | |
Log: SplashInfoColor = #101010 | |
Log: SplashInfoExeName = FreeCAD Link Daily | |
Log: SplashInfoPosition = 12 38 | |
Log: SplashInfoVersion = 2022.07.12 | |
Log: SplashScreen = freecad_link_splash.png | |
Log: SplashTextColor = #000000 | |
Log: StartWorkbench = StartWorkbench | |
Log: SystemParameter = /home/wildjerry/snap/freecad-realthunder/common/.FreeCAD/link.system.cfg | |
Log: UserAppData = /home/wildjerry/snap/freecad-realthunder/common/.FreeCAD/ | |
Log: UserHomePath = /home/wildjerry/snap/freecad-realthunder/common | |
Log: UserParameter = /home/wildjerry/snap/freecad-realthunder/common/.FreeCAD/link.user.cfg | |
Log: VendorCFGPrefix = link. | |
Log: Verbose = | |
Log: WindowIcon = freecad_link.svg | |
Log: WindowTitle = FreeCAD Link Daily | |
Log: Create Application | |
Log: Run App init script | |
Log: Init: starting App::FreeCADInit.py | |
Log: Init: Searching for modules... | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/AddonManager... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Arch... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Assembly3(Init.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Draft... done | |
Log: Drawing became obsolete in 0.17; consider using TechDraw instead. | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Drawing... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Fem... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Idf... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Image... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Import... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Inspection... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Material... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Measure... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Mesh... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/MeshPart... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/OpenSCAD... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Part... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/PartDesign... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Path... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Plot(Init.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Points... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Raytracing... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/ReverseEngineering... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Robot... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Show(Init.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Sketcher... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/SnapSetup... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Spreadsheet... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Start... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Surface... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/TechDraw... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Test... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Tux(Init.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Web... done | |
Log: Init: Initializing freecad.fc_cadquery | |
Log: Module: Part | |
Log: Loading Part module... done | |
Log: Init: No init module found in freecad.fc_cadquery, skipping | |
Log: Init: Initializing freecad.asm3 | |
Log: Init: No init module found in freecad.asm3, skipping | |
Log: Using /snap/freecad-realthunder/56/usr/Mod as module path! | |
Log: System path after init: | |
Log: /snap/freecad-realthunder/56/usr/bin | |
Log: /snap/freecad-realthunder/56/usr/Mod/AddonManager | |
Log: /snap/freecad-realthunder/56/usr/Mod/Arch | |
Log: /snap/freecad-realthunder/56/usr/Mod/Assembly3 | |
Log: /snap/freecad-realthunder/56/usr/Mod/Draft | |
Log: /snap/freecad-realthunder/56/usr/Mod/Drawing | |
Log: /snap/freecad-realthunder/56/usr/Mod/Fem | |
Log: /snap/freecad-realthunder/56/usr/Mod/Idf | |
Log: /snap/freecad-realthunder/56/usr/Mod/Image | |
Log: /snap/freecad-realthunder/56/usr/Mod/Import | |
Log: /snap/freecad-realthunder/56/usr/Mod/Inspection | |
Log: /snap/freecad-realthunder/56/usr/Mod/Material | |
Log: /snap/freecad-realthunder/56/usr/Mod/Measure | |
Log: /snap/freecad-realthunder/56/usr/Mod/Mesh | |
Log: /snap/freecad-realthunder/56/usr/Mod/MeshPart | |
Log: /snap/freecad-realthunder/56/usr/Mod/OpenSCAD | |
Log: /snap/freecad-realthunder/56/usr/Mod/Part | |
Log: /snap/freecad-realthunder/56/usr/Mod/PartDesign | |
Log: /snap/freecad-realthunder/56/usr/Mod/Path | |
Log: /snap/freecad-realthunder/56/usr/Mod/Plot | |
Log: /snap/freecad-realthunder/56/usr/Mod/Points | |
Log: /snap/freecad-realthunder/56/usr/Mod/Raytracing | |
Log: /snap/freecad-realthunder/56/usr/Mod/ReverseEngineering | |
Log: /snap/freecad-realthunder/56/usr/Mod/Robot | |
Log: /snap/freecad-realthunder/56/usr/Mod/Show | |
Log: /snap/freecad-realthunder/56/usr/Mod/Sketcher | |
Log: /snap/freecad-realthunder/56/usr/Mod/SnapSetup | |
Log: /snap/freecad-realthunder/56/usr/Mod/Spreadsheet | |
Log: /snap/freecad-realthunder/56/usr/Mod/Start | |
Log: /snap/freecad-realthunder/56/usr/Mod/Surface | |
Log: /snap/freecad-realthunder/56/usr/Mod/TechDraw | |
Log: /snap/freecad-realthunder/56/usr/Mod/Test | |
Log: /snap/freecad-realthunder/56/usr/Mod/Tux | |
Log: /snap/freecad-realthunder/56/usr/Mod/Web | |
Log: /snap/freecad-realthunder/56/usr/sbin | |
Log: /snap/freecad-realthunder/56/usr/bin | |
Log: /snap/freecad-realthunder/56/sbin | |
Log: /snap/freecad-realthunder/56/bin | |
Log: /usr/local/sbin | |
Log: /usr/local/bin | |
Log: /usr/sbin | |
Log: /usr/bin | |
Log: /sbin | |
Log: /bin | |
Log: /usr/games | |
Log: /usr/local/games | |
Log: /snap/freecad-realthunder/56/kf5/usr/bin | |
Log: Init: App::FreeCADInit.py done | |
Log: Init: Creating Gui::Application and QApplication | |
Log: Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use QT_QPA_PLATFORM=wayland to run on Wayland anyway. | |
Log: Qt: Session management error: Could not open network socket | |
Log: Local server 'FreeCAD' started | |
Log: OpenGL version is: 4.5 (4.5 (Compatibility Profile) Mesa 21.2.6) | |
Log: Run Gui init script | |
Log: Init: Running FreeCADGuiInit.py start script... | |
Log: Init: Searching modules... | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/AddonManager... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Arch... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Assembly3(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Draft... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Drawing... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Fem... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Idf(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Image... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Import... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Inspection... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Material... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Measure(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Mesh... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/MeshPart... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/OpenSCAD... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Part... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/PartDesign... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Path... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Plot(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Points... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Raytracing... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/ReverseEngineering... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Robot... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Show(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Sketcher... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/SnapSetup(InitGui.py not found)... ignore | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Spreadsheet... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Start... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Surface... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/TechDraw... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Test... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Tux... done | |
Log: Init: Initializing /snap/freecad-realthunder/56/usr/Mod/Web... done | |
Log: Init: Initializing freecad.fc_cadquery | |
Log: Init: No init_gui module found in freecad.fc_cadquery, skipping | |
Log: Init: Initializing freecad.asm3 | |
Wrn: 9.641247 <asm3.main> init_gui.py(14): no solver backend found | |
Log: Init: Initializing freecad.asm3... done | |
Log: Init: Loading FreeCAD GUI | |
Log: Init: Running FreeCADGuiInit.py start script... done | |
Log: Init: Activating default workbench StartWorkbench | |
Log: Loading GUI of Web module... done | |
Log: Loading GUI of Start module... done | |
Log: Loading Start module... done | |
Log: Init: Showing main window | |
Log: Main window restored | |
Log: Show main window | |
Log: Toolbars restored | |
Log: Init: Entering event loop | |
Log: Couldn't connect to spacenav daemon. Please ignore if you don't have a spacemouse. | |
Log: Init: Entering event loop | |
Log: Init: Processing command line files | |
Log: "Empty widget item in QVBoxLayout 'verticalLayout'." | |
Log: Hide main window | |
Log: Finish: Event loop left | |
Log: Destruct Gui::Application | |
Log: Couldn't disconnect from spacenav daemon | |
Log: FreeCAD terminating... | |
Log: Saving system parameter... | |
Log: Saving system parameter...done | |
Log: Saving user parameter... | |
Log: Saving user parameter...done |
I only point it out because that's the reason @KeithSloan pinged me on this: I rewrote a large part of the Addon Manager in 0.20. If you aren't using the version of the AM I worked on, I'm of no use to you 😃
How would I determine which version of Adding Manager I have?
…On Sun, Jul 17, 2022, 3:37 PM Chris Hennes ***@***.***> wrote:
***@***.**** commented on this gist.
------------------------------
I only point it out because that's the reason @KeithSloan
<https://github.com/KeithSloan> pinged me on this: I rewrote a large part
of the Addon Manager in 0.20. If you aren't using the version of the AM I
worked on, I'm of no use to you 😃
—
Reply to this email directly, view it on GitHub
<https://gist.github.com/4381ea1c77e2c7504bd935d188583b78#gistcomment-4234979>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AREONRPDDH6XDBQI2O3REBTVURVKHANCNFSM53DSKF7A>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
In your AM, do you see a "Settings" button in the upper right corner?
No, I see a "Configure" button.
Also, the second set of logs (realthunderLog
and realthunderLog2
) are both from realthunder's fork of FreeCAD 0.20.
If you see a "Configure" button (sorry, I misremembered the old text) you are using an old version of the AM: so we're back to "I'm no use to you" 😄 .
Well, I apreciate you trying to help, even if I turned out to be running
the wrong version.
What command line options would I use for this? The above logs were created
with `--write-log`
…On Mon, Jul 11, 2022, 12:58 PM Chris Hennes ***@***.***> wrote:
***@***.**** commented on this gist.
------------------------------
I do mean the FreeCAD general logging when installing an Addon, but I
actually don't see any output from the Addon Manager in the logs you posted
above. Can you try again? With all log levels enabled the Addon Manager is
quite noisy, we shouldn't be able to miss it :).
—
Reply to this email directly, view it on GitHub
<https://gist.github.com/4381ea1c77e2c7504bd935d188583b78#gistcomment-4228206>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AREONRKYDFHAP3POUC6644DVTROCRANCNFSM53DSKF7A>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
The
realthunder
logs are from realthunder's fork of FreeCAD 0.20. If you'd like me to try the mainline version of FreeCAD 0.20 , I can.This had no effect.