ankify.py

#!/usr/bin/env python
# muflax <muflax@gmail.com>, GPL 3.0

"""
Reads in .txt files and formats them for cloze deletion, with 2 lines of context
before and after. It regards every line as one item.
"""

import re, sys

rosshadden

#!/usr/bin/env bash

numDisplays=$(xrandr --current | grep '\bconnected' | wc -l)
outputs="--output eDP1 --primary --mode 2880x1620 --pos 2880x0 --dpi 96 --scale 1x1"

xrandr --output HDMI1 --off
xrandr --output DP2 --off

if xrandr | grep "HDMI1 connected"; then
	outputs+=" --output HDMI1 --auto --mode 1920x1080 --pos 0x0 --right-of eDP1 --scale 1.5x1.5"

ChickenProp

After installing Arch on my Raspberry Pi, internet worked out of the box: I could plug it into the router, turn it on, ssh in and start downloading things. But the router is in my housemate's bedroom, which isn't ideal. If I want the Pi to be connected to the internet in my room, I need it to be connected to my laptop. (Another option would be a USB wifi dongle, of course.) This is how I did it. Much credit goes to the Ubuntu wiki's Connection sharing page.

I should disclaim that I don't fully understand networking stuff, and some of what I say might be wrong. I also didn't write this as I was going; so while I've consulted my browser and shell histories, it's possible I've forgotten some steps.

My laptop is running Gentoo, and this is where most of the work has to be done. It connects to the internet through wifi, on interface wlan0. The ethernet port is eth0, and eth0 is also the name of the ethernet port on the Pi.

Step zero: plug ev

wangkuiyi

#!/bin/bash

# git pre-commit hook that runs an clang-format stylecheck.
# Features:
#  - abort commit when commit does not comply with the style guidelines
#  - create a patch of the proposed style changes

# modifications for clang-format by rene.milk@wwu.de
# This file is part of a set of unofficial pre-commit hooks available
# at github.

oliora

%module(threads="1") something

%{
// Register a callback (called from Python code)
// callbackFunc is a Python callable accepting one argument
void registerHandler(PyObject *callbackFunc)
{
    SWIG_PYTHON_THREAD_BEGIN_ALLOW;
    
    const bool hasCallback = 

Lordnibbler

Status

READY/IN DEVELOPMENT/HOLD

Migrations

YES | NO

Description

A few sentences describing the overall goals of the pull request's commits.

Related PRs

martinruenz

Introduction

This document contains some of the ffmpeg snippets I use most commonly, and typically in the context of converting research-related image data to video. It is not meant to be exhaustive.

Further reading

• Documentation: https://ffmpeg.org/ffmpeg.html
• Superuser community: https://superuser.com/questions/tagged/ffmpeg
• More on concatenation / named pipes: https://trac.ffmpeg.org/wiki/Concatenate
• A tutorial: Learn FFmpeg libav the Hard Way

bartoszfilipowicz

SSH to rasp Pi: 
ssh pi@10.0.11.90
password: raspberry

Given that the lego Tower is in /dev/usb/legousbtower0, start by making sure the device is accessible with a lazy hack:

    $ sudo chmod 777 /dev/usb/legousbtower0

Here are two useful nqc commands to communicate with the RCX brick through the Lego Tower.
1) Uploading the firmware(if needed): nqc -Susb:/dev/usb/legousbtower0 -firmware firm0309.lgo

jezen

#Sample code

#Hello world

"Hello world!" print

#Factorial

factorial := method(n, if(n == 1, 1, n * factorial(n - 1)))
99 bottles of beer

agaviria

# comments example for .dat or .ledger files
@smallexample
; This is a single line comment,
# and this,
% and this,
| and this,
* and this.

# If you have a deeply nested tree of accounts, 
# it may be convenient to define an alias, for example: