configuration.nix

# Edit this configuration file to define what should be installed on
# your system.  Help is available in the configuration.nix(5) man page
# and in the NixOS manual (accessible by running ‘nixos-help’).

{ config, pkgs, ... }:

{
  imports =
    [ # Include the results of the hardware scan.
      ./hardware-configuration.nix
      ./winston.nix
    ];

  # Use the GRUB 2 boot loader.
  boot.loader.grub.enable = true;
  boot.loader.grub.version = 2;
  boot.loader.grub.efiSupport = true;
  boot.loader.grub.efiInstallAsRemovable = true;
  boot.loader.efi.efiSysMountPoint = "/boot";
  # Define on which hard drive you want to install Grub.
  boot.loader.grub.device = "/dev/vda"; # or "nodev" for efi only

  networking.hostName = "conficker"; # Define your hostname.
  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.

  # Set your time zone.
  time.timeZone = "America/Chicago";

  # The global useDHCP flag is deprecated, therefore explicitly set to false here.
  # Per-interface useDHCP will be mandatory in the future, so this generated config
  # replicates the default behaviour.
  networking.useDHCP = false;
  networking.interfaces.enp1s0.useDHCP = true;

  # Configure network proxy if necessary
  # networking.proxy.default = "http://user:password@proxy:port/";
  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";

  system.stateVersion = "21.11"; # Did you read the comment?

}

hardware-configuration.nix

# Do not modify this file!  It was generated by ‘nixos-generate-config’
# and may be overwritten by future invocations.  Please make changes
# to /etc/nixos/configuration.nix instead.
{ config, lib, pkgs, modulesPath, ... }:

{
  imports =
    [ (modulesPath + "/profiles/qemu-guest.nix")
    ];

  boot.initrd.availableKernelModules = [ "ahci" "xhci_pci" "virtio_pci" "sr_mod" "virtio_blk" ];
  boot.initrd.kernelModules = [ ];
  boot.kernelModules = [ "kvm-intel" ];
  boot.extraModulePackages = [ ];

  fileSystems."/" =
    { device = "/dev/disk/by-uuid/d8331ff5-1692-43b5-a77e-91deda0f6ac5";
      fsType = "btrfs";
    };

  fileSystems."/home" =
    { device = "/dev/disk/by-uuid/d8331ff5-1692-43b5-a77e-91deda0f6ac5";
      fsType = "btrfs";
      options = [ "subvol=home" ];
    };

  fileSystems."/nix" =
    { device = "/dev/disk/by-uuid/d8331ff5-1692-43b5-a77e-91deda0f6ac5";
      fsType = "btrfs";
      options = [ "subvol=nix" ];
    };

  fileSystems."/boot" =
    { device = "/dev/disk/by-uuid/E723-220D";
      fsType = "vfat";
    };

  swapDevices = [ ];

  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
}

winston.nix

# Edit this configuration file to define what should be installed on
# your system.  Help is available in the configuration.nix(5) man page
# and in the NixOS manual (accessible by running ‘nixos-help’).

{ config, pkgs, ... }:

{
  nixpkgs.config.allowUnfree = true;
  
  # Select internationalisation properties.
  i18n.defaultLocale = "en_US.UTF-8";
  console = {
    font = "Lat2-Terminus16";
    keyMap = "dvorak";
  };

  # Enable the X11 windowing system.
  services.xserver.enable = true;
  
  # Enable the GNOME Desktop Environment.
  services.xserver.displayManager.gdm.enable = true;
  services.xserver.desktopManager.gnome.enable = true;

  # Configure keymap in X11
  # The following layout option seems to break Gnome and maybe GDM layout.
  #services.xserver.layout = "dvorak";
  # services.xserver.xkbOptions = "eurosign:e";

  # Maybe enable virtualization.
  # virtualisation.libvirtd.enable = true;

  # Enable CUPS to print documents.
  services.printing.enable = true;

  # Enable sound.
  sound.enable = true;
  hardware.pulseaudio.enable = true;

  # Enable touchpad support (enabled default in most desktopManager).
  services.xserver.libinput.enable = true;

  # Define a user account. Don't forget to set a password with ‘passwd’.
  users.users.winston = {
    isNormalUser = true;
    extraGroups = [
      "wheel"  # Enable ‘sudo’ for the user.
    ];
  };

  # List packages installed in system profile. To search, run:
  # $ nix search wget
  environment.systemPackages = with pkgs; [
    tmux
    screen  # Serial terminals

    emacs
    ispell  # Emacs needs this for flyspell.

    libvterm  # Emacs vterm terminal emulator is $$$.
    cmake  # vterm needs this to compile.
    gnumake  # cmake needs it.  Not sure why this isn't pulled in already.
    gcc  # Need a compiler too.
    git

    # HTTP clients
    jq
    qutebrowser
    torbrowser
    firefox
    lynx
    links2
    
    # Correspondence
    thunderbird
    neomutt
    signal-desktop
    weechat

    # Publishing/document preparation
    libreoffice-fresh
    hugo
    img2pdf
    texlive.combined.scheme-full
    

    pavucontrol
    obs-studio
    ffmpeg
    mpv
    zathura
    i3
    i3status
    xorg.xev
    xfce.terminal
    rofi
    xbindkeys
    dunst
    pass
    rofi-pass
    redshift
    ponymix
    mpvc
    maim
    slop

    # VMs
    libvirt
    virt-manager

    # Gaming
    steam
    xonotic
    nethack
    gzdoom

    # Coding stuff
    racket
    python

    # Fonts
    go-font
    mononoki

    # Network utilities and diagnostics
    inetutils
    mtr
    iperf
    wireshark
    openssl
    speedtest-cli
    httpie
    wget
    tcpdump
    bind
    bridge-utils
    ethtool
    mosh
    wgetpaste
    socat
    busybox  # For httpd.
    wol

    # Software diagnostics
    gdb
    ltrace
    strace

    # Utilities
    rlwrap
    keychain
    sshfs
    pv
    pwgen
    ripgrep
    file
    parted
    gparted
    htop
    mc
    nwipe
    ddrescue
    gnupg
    acpi
    sysstat
    dstat
    stress-ng
    rsync
    lsof
    lnav
    entr
    lm_sensors
    pciutils

    # Backup
    borgmatic
    borgbackup

    # Remote login
    drawterm
    remmina
  ];

  # Some programs need SUID wrappers, can be configured further or are
  # started in user sessions.
  programs.mtr.enable = true;
  programs.gnupg.agent = {
    enable = true;
    enableSSHSupport = true;
  };

  # List services that you want to enable:

  # Enable the OpenSSH daemon.
  services.openssh.enable = true;

  # Open ports in the firewall.
  # networking.firewall.allowedTCPPorts = [ ... ];
  # networking.firewall.allowedUDPPorts = [ ... ];
  # Or disable the firewall altogether.
  # networking.firewall.enable = false;

  # This value determines the NixOS release from which the default
  # settings for stateful data, like file locations and database versions
  # on your system were taken. It‘s perfectly fine and recommended to leave
  # this value at the release version of the first install of this system.
  # Before changing this value read the documentation for this option
  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
  system.stateVersion = "21.11"; # Did you read the comment?

}