This python script was found on Stackoverflow.com forums. It is designed to reboot an Rpi remotely using another device by pulling up on a GPIO by use of a relay across GPIO input and 3.3v

Remote Reboot Rpi @Adam Cayenne

import os
import time
import sys
# Import the modules to send commands to the system and access GPIO pins
from subprocess import call
import RPi.GPIO as gpio
from time import sleep
from os import system

gpio.setmode(gpio.BCM) # Set pin numbering to BCM numbering
gpio.setup(22, gpio.IN) # Set up pin 22 as an input

def confirmation(pin):
    #print "Confirmation Function on pin %d" % pin
    system('echo Press again to confirm Shut down menu! | wall -n') # let all logged in users know
    gpio.remove_event_detect(pin)
    gpio.add_event_detect(pin, gpio.RISING, bouncetime=200)
    sleep(2) # if button has been pressed again within 2 seconds, shut down function is called
    if gpio.event_detected(pin):
        shutdown(pin)
    else:
        #print "canceled"
        system('echo Shut down canceled! | wall -n') # let all logged in users know
        main()

def resetPin(pin):
    #print "Pin %d has been reset" % pin
    gpio.remove_event_detect(pin)
    gpio.add_event_detect(pin, gpio.RISING, bouncetime=200)

def reboot(pin):
    #print "Reboot Function on pin %d" % pin
    call('reboot', shell=False)
    exit(0)

# Define a function to run when an interrupt is called
def shutdown(pin):
    #print "ShutDown function on pin %d" % pin
    system('echo Press again if you want to reboot instead of shut down! | wall -n') # let all logged in users know
    gpio.remove_event_detect(pin)
    gpio.add_event_detect(pin, gpio.RISING, bouncetime=200)
    sleep(2) # if the button has been pressed for a third time, within 2 seconds, Pi will reboot
    if gpio.event_detected(pin):
        reboot(pin)
    else:
        call('halt', shell=False)
        exit(0)

# Define a function to keep script running
def main():
    #print "Main Function"
    resetPin(22)
    while True:
        sleep(1)
        if gpio.event_detected(22):
            confirmation(22)

main() # Run the main function to keep script running