Created
January 21, 2018 22:16
-
-
Save wmontg5988/a9f766d50b35c44cba8a95dc3ebc024a to your computer and use it in GitHub Desktop.
Change to get smooth reading from high voltage sensor
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
//#define CAYENNE_DEBUG // Uncomment to show debug messages | |
//#define CAYENNE_PRINT Serial // Comment this out to disable prints and save space | |
#include <CayenneESP8266Shield.h> | |
#include <TMRpcm_PLDuino.h> | |
#include <SPI.h> | |
#include <SD.h> | |
#include <Adafruit_GFX.h> | |
#include <Adafruit_ILI9341.h> | |
#include <PLDuino.h> | |
#include <PLDTouch.h> | |
#include <PLDuinoGUI.h> | |
#include <using_namespace_PLDuinoGUI.h> | |
#include <DS3232RTC.h> | |
#include <TimeLib.h> | |
#include <Wire.h> | |
#include <avr/io.h> | |
const int numReadings = 10; | |
int readings[numReadings]; // the readings from the analog input | |
int index = 0; // the index of the current reading | |
int total = 0; // the running total | |
int average = 0; // the average | |
int inputPin = A3; | |
Adafruit_ILI9341 tft = Adafruit_ILI9341(PLDuino::LCD_CS, PLDuino::LCD_DC); | |
PLDTouch touch(PLDuino::TOUCH_CS, PLDuino::TOUCH_IRQ); | |
Button btnVoltage("Front", ILI9341_YELLOW, ILI9341_BLACK); | |
Button btnVoltage1("Back", ILI9341_YELLOW, ILI9341_BLACK); | |
Button btnVoltage2("Battery", ILI9341_BLUE, ILI9341_BLACK); | |
Button btnVoltage3("Inverter", ILI9341_RED, ILI9341_BLACK); | |
// Cayenne authentication token. This should be obtained from the Cayenne Dashboard. | |
char token[] = "opioxqafxw"; | |
// Your network name and password. | |
char ssid[] = "free"; | |
char password[] = "zzZw23521041"; | |
// Set ESP8266 Serial object | |
#define EspSerial Serial2 | |
ESP8266 wifi(EspSerial); | |
void setup() | |
{ | |
PLDuino::init(); | |
PLDuino::enableLCD(); | |
PLDuino::enableESP(); | |
tft.begin(); | |
tft.setRotation(3); | |
touch. init(1); | |
// initialize all the readings to 0: | |
for (int thisReading = 0; thisReading < numReadings; thisReading++) | |
readings[thisReading] = 0; | |
Serial.begin(9600); | |
delay(100); | |
// Set ESP8266 baud rate | |
EspSerial.begin(115200); | |
delay(100); | |
Cayenne.begin(token, wifi, ssid, password); | |
btnVoltage.setPositionAndSize(01, 01, 100, 75); | |
btnVoltage.draw(tft); | |
btnVoltage1.setPositionAndSize(01, 75, 100, 75); | |
btnVoltage1.draw(tft); | |
btnVoltage2.setPositionAndSize(01, 150, 100, 75); | |
btnVoltage2.draw(tft); | |
btnVoltage3.setPositionAndSize(175, 1, 150, 110); | |
btnVoltage3.draw(tft); | |
} | |
void loop() | |
{ | |
Cayenne.run(); | |
} | |
//front solar panel voltage | |
CAYENNE_OUT(V1) | |
{ | |
int adcVal = analogRead(A0); | |
float adcVoltage = 55.0*adcVal/1024; | |
Cayenne.virtualWrite(V1,adcVoltage); | |
btnVoltage.setText(String(adcVoltage)); | |
btnVoltage.draw(tft); | |
//delay (4000); | |
} | |
//back solar panel voltage | |
CAYENNE_OUT(V2) | |
{ | |
int adcVal1 = analogRead(A1); | |
float adcVoltage1 = 55.0*adcVal1/1024; | |
Cayenne.virtualWrite(V2,adcVoltage1); | |
btnVoltage1.setText(String(adcVoltage1)); | |
btnVoltage1.draw(tft); | |
//delay (4000); | |
} | |
//battery voltage | |
CAYENNE_OUT(V3) | |
{ | |
int adcVal2 = analogRead(A2); | |
float adcVoltage2 = 55.0*adcVal2/1024; | |
Cayenne.virtualWrite(V3,adcVoltage2); | |
btnVoltage2.setText(String(adcVoltage2)); | |
btnVoltage2.draw(tft); | |
//delay (4000); | |
} | |
//inverter voltage | |
CAYENNE_OUT(V4) | |
{ | |
// subtract the last reading: | |
total= total - readings[index]; | |
// read from the sensor: | |
readings[index] = analogRead(inputPin); | |
// add the reading to the total: | |
total= total + readings[index]; | |
// advance to the next position in the array: | |
index = index + 1; | |
// if we're at the end of the array... | |
if (index >= numReadings) | |
// ...wrap around to the beginning: | |
index = 0; | |
// calculate the average: | |
average = total / numReadings * 575.0 / 1024; | |
// send it to the computer as ASCII digits | |
//float average = 575.0*numReadings/1024; | |
Cayenne.virtualWrite(V4,average); | |
btnVoltage3.setText(String(average)); | |
btnVoltage3.draw(tft); | |
//Serial.println(average); | |
delay(1); // delay in between reads for stability | |
} | |
/*int adcVal3 = analogRead(A3); | |
float adcVoltage3 = 575.0*adcVal3/1024; | |
Cayenne.virtualWrite(V4,adcVoltage3); | |
btnVoltage3.setText(String(adcVoltage3)); | |
btnVoltage3.draw(tft); | |
//delay (4000);*/ |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment