Skip to content

Instantly share code, notes, and snippets.

@wolfpython

wolfpython/gist:2334074

Created April 8, 2012 02:47
Show Gist options
  • Save wolfpython/2334074 to your computer and use it in GitHub Desktop.
Save wolfpython/2334074 to your computer and use it in GitHub Desktop.
Download ZIP
dmesg
Raw
gistfile1.txt
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-43) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sat Mar 31 03:56:41 UTC 2012
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
[ 0.000000] BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff8e000 - 000000007ffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffd0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7ff80 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 377df000 - 37fefc45
[ 0.000000] Allocated new RAMDISK: 00100000 - 00910c45
[ 0.000000] Move RAMDISK from 00000000377df000 - 0000000037fefc44 to 00100000 - 00910c44
[ 0.000000] ACPI: RSDP 000fb800 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 7ff80000 00040 (v01 A_M_I_ OEMRSDT 09000921 MSFT 00000097)
[ 0.000000] ACPI: FACP 7ff80200 00084 (v02 A_M_I_ OEMFACP 09000921 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7ff80440 07970 (v01 A1282 A1282000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 7ff8e000 00040
[ 0.000000] ACPI: APIC 7ff80390 0006C (v01 A_M_I_ OEMAPIC 09000921 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7ff80400 0003C (v01 A_M_I_ OEMMCFG 09000921 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7ff8e040 00089 (v01 A_M_I_ AMI_OEM 09000921 MSFT 00000097)
[ 0.000000] ACPI: HPET 7ff87db0 00038 (v01 A_M_I_ OEMHPET 09000921 MSFT 00000097)
[ 0.000000] ACPI: GSCI 7ff8e0d0 02024 (v01 A_M_I_ GMCHSCI 09000921 MSFT 00000097)
[ 0.000000] ACPI: SSDT 7ff90700 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1163MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014ccd2c] TEXT DATA BSS ==> [0001000000 - 00014ccd2c]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00014cd000 - 00014d3224] BRK ==> [00014cd000 - 00014d3224]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000100000 - 0000910c45] NEW RAMDISK ==> [0000100000 - 0000910c45]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007ff80
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ff80
[ 0.000000] On node 0 totalpages: 524047
[ 0.000000] free_area_init_node: node 0, pgdat c13b48c0, node_mem_map c14d5200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2328 pages used for memmap
[ 0.000000] HighMem zone: 295530 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34328 r0 d23016 u1048576
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519951
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=632a3d6d-98ed-4889-8540-8d7314412c35 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Initializing HighMem for node 0 (000373fe:0007ff80)
[ 0.000000] Memory: 2064340k/2096640k available (2506k kernel code, 30680k reserved, 1326k data, 380k init, 1191432k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB)
[ 0.000000] .data : 0xc1272afb - 0xc13be4c4 (1326 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1272afb (2506 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2933.584 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5867.16 BogoMIPS (lpj=11734336)
[ 0.004014] Security Framework initialized
[ 0.004018] SELinux: Disabled at boot.
[ 0.004023] Mount-cache hash table entries: 512
[ 0.004105] Initializing cgroup subsys ns
[ 0.004108] Initializing cgroup subsys cpuacct
[ 0.004110] Initializing cgroup subsys devices
[ 0.004112] Initializing cgroup subsys freezer
[ 0.004113] Initializing cgroup subsys net_cls
[ 0.004129] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004131] CPU: L2 cache: 2048K
[ 0.004133] CPU: Physical Processor ID: 0
[ 0.004134] CPU: Processor Core ID: 0
[ 0.004137] mce: CPU supports 6 MCE banks
[ 0.004142] CPU0: Thermal monitoring enabled (TM2)
[ 0.004144] using mwait in idle threads.
[ 0.004149] Performance Events: Core2 events, Intel PMU driver.
[ 0.004154] ... version: 2
[ 0.004155] ... bit width: 40
[ 0.004156] ... generic registers: 2
[ 0.004157] ... value mask: 000000ffffffffff
[ 0.004158] ... max period: 000000007fffffff
[ 0.004159] ... fixed-purpose events: 3
[ 0.004160] ... event mask: 0000000700000003
[ 0.004164] Checking 'hlt' instruction... OK.
[ 0.020920] ACPI: Core revision 20090903
[ 0.028042] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028346] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070073] CPU0: Intel Pentium(R) Dual-Core CPU E6500 @ 2.93GHz stepping 0a
[ 0.072001] APIC calibration not consistent with PM-Timer: 115ms instead of 100ms
[ 0.072001] APIC delta adjusted to PM-Timer: 1666664 (1933319)
[ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 2048K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.156068] CPU1: Intel Pentium(R) Dual-Core CPU E6500 @ 2.93GHz stepping 0a
[ 0.156075] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.160043] Brought up 2 CPUs
[ 0.160045] Total of 2 processors activated (11733.81 BogoMIPS).
[ 0.160743] CPU0 attaching sched-domain:
[ 0.160746] domain 0: span 0-1 level MC
[ 0.160748] groups: group c2803778 cpus 0 group c2903778 cpus 1
[ 0.160753] CPU1 attaching sched-domain:
[ 0.160754] domain 0: span 0-1 level MC
[ 0.160755] groups: group c2903778 cpus 1 group c2803778 cpus 0
[ 0.160799] devtmpfs: initialized
[ 0.160799] regulator: core version 0.5
[ 0.160799] NET: Registered protocol family 16
[ 0.160799] ACPI: bus type pci registered
[ 0.160799] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.160799] PCI: Not using MMCONFIG.
[ 0.160799] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[ 0.160799] PCI: Using configuration type 1 for base access
[ 0.160799] bio: create slab <bio-0> at 0
[ 0.160799] ACPI: EC: Look up EC in DSDT
[ 0.164023] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.168086] ACPI: Interpreter enabled
[ 0.168090] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.168105] ACPI: Using IOAPIC for interrupt routing
[ 0.168140] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.170223] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[ 0.170225] PCI: Using MMCONFIG for extended config space
[ 0.175037] ACPI Warning: Incorrect checksum in table [OEMB] - 07, should be 02 (20090903/tbutils-314)
[ 0.175738] ACPI: No dock devices found.
[ 0.175844] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.175924] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.175927] pci 0000:00:01.0: PME# disabled
[ 0.175974] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ffc000-0xf9ffffff]
[ 0.176022] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.176025] pci 0000:00:1b.0: PME# disabled
[ 0.176087] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.176090] pci 0000:00:1c.0: PME# disabled
[ 0.176153] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.176156] pci 0000:00:1c.1: PME# disabled
[ 0.176195] pci 0000:00:1d.0: reg 20 io port: [0xc480-0xc49f]
[ 0.176235] pci 0000:00:1d.1: reg 20 io port: [0xc800-0xc81f]
[ 0.176276] pci 0000:00:1d.2: reg 20 io port: [0xc880-0xc89f]
[ 0.176316] pci 0000:00:1d.3: reg 20 io port: [0xcc00-0xcc1f]
[ 0.176360] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9ffbc00-0xf9ffbfff]
[ 0.176413] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.176416] pci 0000:00:1d.7: PME# disabled
[ 0.176525] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.176569] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.176574] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.176580] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
[ 0.176585] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
[ 0.176590] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.176623] pci 0000:00:1f.2: reg 10 io port: [0xc400-0xc407]
[ 0.176628] pci 0000:00:1f.2: reg 14 io port: [0xc080-0xc083]
[ 0.176632] pci 0000:00:1f.2: reg 18 io port: [0xc000-0xc007]
[ 0.176636] pci 0000:00:1f.2: reg 1c io port: [0xbc00-0xbc03]
[ 0.176641] pci 0000:00:1f.2: reg 20 io port: [0xb880-0xb88f]
[ 0.176665] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.176667] pci 0000:00:1f.2: PME# disabled
[ 0.176698] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.176705] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.176713] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
[ 0.176717] pci 0000:01:00.0: reg 24 io port: [0xdc00-0xdc7f]
[ 0.176721] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfea80000-0xfeafffff]
[ 0.176827] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[ 0.176829] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfeafffff]
[ 0.176833] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.176912] pci 0000:02:00.0: reg 10 64bit mmio: [0xfebc0000-0xfebfffff]
[ 0.176919] pci 0000:02:00.0: reg 18 io port: [0xec00-0xec7f]
[ 0.176991] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.176995] pci 0000:02:00.0: PME# disabled
[ 0.177022] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.177074] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
[ 0.177077] pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.177119] pci 0000:00:1e.0: transparent bridge
[ 0.177138] pci_bus 0000:00: on NUMA node 0
[ 0.177141] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.177241] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.177285] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.177360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.177400] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.183117] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.183196] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.183274] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.183352] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.183430] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.183508] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.183586] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.183663] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.183731] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.183733] vgaarb: loaded
[ 0.183742] PCI: Using ACPI for IRQ routing
[ 0.183742] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.183742] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.183742] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.188015] Switching to clocksource tsc
[ 0.188891] pnp: PnP ACPI init
[ 0.188897] ACPI: bus type pnp registered
[ 0.191417] pnp: PnP ACPI: found 16 devices
[ 0.191418] ACPI: ACPI bus type pnp unregistered
[ 0.191421] PnPBIOS: Disabled by ACPI PNP
[ 0.191427] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.191432] system 00:07: ioport range 0x290-0x297 has been reserved
[ 0.191436] system 00:08: ioport range 0x400-0x41f has been reserved
[ 0.191438] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.191440] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.191442] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.191444] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.191446] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.191450] system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved
[ 0.191454] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.191456] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.191460] system 00:0e: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.191464] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.191466] system 00:0f: iomem range 0xc0000-0xcffff could not be reserved
[ 0.191468] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 0.191470] system 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.191472] system 00:0f: iomem range 0xf0000000-0xffffffff could not be reserved
[ 0.226109] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.226112] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 0.226115] pci 0000:00:01.0: MEM window: 0xfa000000-0xfeafffff
[ 0.226117] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 0.226120] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 0.226123] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.226127] pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff
[ 0.226130] pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff
[ 0.226134] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.226137] pci 0000:00:1c.1: IO window: 0xe000-0xefff
[ 0.226141] pci 0000:00:1c.1: MEM window: 0xfeb00000-0xfebfffff
[ 0.226144] pci 0000:00:1c.1: PREFETCH window: 0x00000080400000-0x000000805fffff
[ 0.226148] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.226150] pci 0000:00:1e.0: IO window: disabled
[ 0.226153] pci 0000:00:1e.0: MEM window: disabled
[ 0.226156] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.226166] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.226168] pci 0000:00:01.0: setting latency timer to 64
[ 0.226174] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.226176] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.226179] pci 0000:00:1c.0: setting latency timer to 64
[ 0.226186] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.226188] pci 0000:00:1c.1: setting latency timer to 64
[ 0.226193] pci 0000:00:1e.0: setting latency timer to 64
[ 0.226196] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.226198] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.226199] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 0.226201] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfeafffff]
[ 0.226203] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[ 0.226205] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff]
[ 0.226207] pci_bus 0000:03: resource 1 mem: [0x80000000-0x801fffff]
[ 0.226209] pci_bus 0000:03: resource 2 pref mem [0x80200000-0x803fffff]
[ 0.226211] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
[ 0.226212] pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.226214] pci_bus 0000:02: resource 2 pref mem [0x80400000-0x805fffff]
[ 0.226216] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.226218] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[ 0.226236] NET: Registered protocol family 2
[ 0.226291] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.226476] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.226781] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.226943] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.226945] TCP reno registered
[ 0.226994] NET: Registered protocol family 1
[ 0.227017] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.227032] pci 0000:00:1d.0: PCI INT A disabled
[ 0.227037] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.227050] pci 0000:00:1d.1: PCI INT B disabled
[ 0.227055] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.227068] pci 0000:00:1d.2: PCI INT C disabled
[ 0.227073] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.227086] pci 0000:00:1d.3: PCI INT D disabled
[ 0.227094] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.227112] pci 0000:00:1d.7: PCI INT A disabled
[ 0.227126] pci 0000:01:00.0: Boot video device
[ 0.227160] Unpacking initramfs...
[ 0.388476] Freeing initrd memory: 8259k freed
[ 0.392102] audit: initializing netlink socket (disabled)
[ 0.392112] type=2000 audit(1333852064.391:1): initialized
[ 0.394378] highmem bounce pool size: 64 pages
[ 0.394381] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.395306] VFS: Disk quotas dquot_6.5.2
[ 0.395340] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.395391] msgmni has been set to 1723
[ 0.395517] alg: No test for stdrng (krng)
[ 0.395550] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.395552] io scheduler noop registered
[ 0.395553] io scheduler anticipatory registered
[ 0.395554] io scheduler deadline registered
[ 0.395578] io scheduler cfq registered (default)
[ 0.395652] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.395657] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.395727] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.395733] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.395857] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.395863] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.395982] isapnp: Scanning for PnP cards...
[ 0.748795] isapnp: No Plug & Play device found
[ 0.749677] Linux agpgart interface v0.103
[ 0.749755] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.749835] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.750102] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.750207] PNP: No PS/2 controller found. Probing ports directly.
[ 0.752973] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.752977] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.753011] mice: PS/2 mouse device common for all mice
[ 0.753044] rtc_cmos 00:03: RTC can wake from S4
[ 0.753063] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.753083] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.753092] cpuidle: using governor ladder
[ 0.753093] cpuidle: using governor menu
[ 0.753096] No iBFT detected.
[ 0.753316] TCP cubic registered
[ 0.753410] NET: Registered protocol family 10
[ 0.753881] Mobile IPv6
[ 0.753883] NET: Registered protocol family 17
[ 0.753893] Using IPI No-Shortcut mode
[ 0.753931] PM: Resume from disk failed.
[ 0.753937] registered taskstats version 1
[ 0.754151] rtc_cmos 00:03: setting system clock to 2012-04-08 02:27:45 UTC (1333852065)
[ 0.754180] Initalizing network drop monitor service
[ 0.754197] Freeing unused kernel memory: 380k freed
[ 0.754343] Write protecting the kernel text: 2508k
[ 0.754357] Write protecting the kernel read-only data: 920k
[ 0.762966] udev[57]: starting version 164
[ 0.825290] usbcore: registered new interface driver usbfs
[ 0.825308] usbcore: registered new interface driver hub
[ 0.825331] usbcore: registered new device driver usb
[ 0.835718] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.835729] ATL1E 0000:02:00.0: setting latency timer to 64
[ 0.836417] SCSI subsystem initialized
[ 0.839098] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.839114] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.839124] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.839127] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.839142] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.839163] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.839171] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.843067] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.843196] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9ffbc00
[ 0.853339] libata version 3.00 loaded.
[ 0.855881] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.855906] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.855910] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.855913] usb usb1: Product: EHCI Host Controller
[ 0.855916] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 0.855918] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.855985] usb usb1: configuration #1 chosen from 1 choice
[ 0.856007] hub 1-0:1.0: USB hub found
[ 0.856012] hub 1-0:1.0: 8 ports detected
[ 0.856059] ata_piix 0000:00:1f.1: version 2.13
[ 0.856072] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.856182] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.856232] scsi0 : ata_piix
[ 0.856324] scsi1 : ata_piix
[ 0.857131] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.857133] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.857151] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 0.857154] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.857175] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.857237] scsi2 : ata_piix
[ 0.857287] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.857301] scsi3 : ata_piix
[ 0.858227] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 22
[ 0.858229] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 22
[ 0.858256] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.858261] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.858263] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.858270] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.858290] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
[ 0.858313] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.858314] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.858316] usb usb2: Product: UHCI Host Controller
[ 0.858317] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 0.858319] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.858362] usb usb2: configuration #1 chosen from 1 choice
[ 0.858380] hub 2-0:1.0: USB hub found
[ 0.858384] hub 2-0:1.0: 2 ports detected
[ 0.858417] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.858422] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.858424] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.858429] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.858453] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
[ 0.858477] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.858479] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.858480] usb usb3: Product: UHCI Host Controller
[ 0.858481] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 0.858483] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.858520] usb usb3: configuration #1 chosen from 1 choice
[ 0.858538] hub 3-0:1.0: USB hub found
[ 0.858542] hub 3-0:1.0: 2 ports detected
[ 0.858573] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.858579] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.858582] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.858587] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.858610] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
[ 0.858630] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.858632] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.858634] usb usb4: Product: UHCI Host Controller
[ 0.858635] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 0.858636] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.858675] usb usb4: configuration #1 chosen from 1 choice
[ 0.858692] hub 4-0:1.0: USB hub found
[ 0.858696] hub 4-0:1.0: 2 ports detected
[ 0.858726] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.858731] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.858733] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.858739] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.858762] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
[ 0.858782] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.858784] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.858786] usb usb5: Product: UHCI Host Controller
[ 0.858787] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 0.858789] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.858828] usb usb5: configuration #1 chosen from 1 choice
[ 0.858845] hub 5-0:1.0: USB hub found
[ 0.858849] hub 5-0:1.0: 2 ports detected
[ 1.023114] ata4.00: ATA-8: WDC WD10EADS-65M2B0, 01.00A01, max UDMA/133
[ 1.023117] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.028287] ata3.01: ATAPI: TSSTcorp CDDVDW TS-H663C, CM00, max UDMA/100
[ 1.036223] ata4.00: configured for UDMA/133
[ 1.044224] ata3.01: configured for UDMA/100
[ 1.047845] scsi 2:0:1:0: CD-ROM TSSTcorp CDDVDW TS-H663C CM00 PQ: 0 ANSI: 5
[ 1.048038] scsi 3:0:0:0: Direct-Access ATA WDC WD10EADS-65M 01.0 PQ: 0 ANSI: 5
[ 1.061011] sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.061015] Uniform CD-ROM driver Revision: 3.20
[ 1.061118] sr 2:0:1:0: Attached scsi CD-ROM sr0
[ 1.061325] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.061455] sd 3:0:0:0: [sda] Write Protect is off
[ 1.061457] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.061472] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.061553] sda:
[ 1.064071] sr 2:0:1:0: Attached scsi generic sg0 type 5
[ 1.064091] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1.067349] sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13
[ 1.224011] usb 1-5: new high speed USB device using ehci_hcd and address 3
[ 1.224700] sda14 sda15 > sda3 sda4
[ 1.247672] sda3: <bsd:bad subpartition - ignored
[ 1.247675] bad subpartition - ignored
[ 1.247677] bad subpartition - ignored
[ 1.247679] bad subpartition - ignored
[ 1.247681] >
[ 1.265168] sda4: <netbsd: sda16 sda17bad subpartition - ignored
[ 1.265173] bad subpartition - ignored
[ 1.265175] sda18bad subpartition - ignored
[ 1.265177] bad subpartition - ignored
[ 1.265179] bad subpartition - ignored
[ 1.265180] bad subpartition - ignored
[ 1.265182] bad subpartition - ignored
[ 1.265183] bad subpartition - ignored
[ 1.265185] bad subpartition - ignored
[ 1.265187] bad subpartition - ignored
[ 1.265188] >
[ 1.265685] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.363712] usb 1-5: New USB device found, idVendor=0bda, idProduct=8189
[ 1.363717] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.363720] usb 1-5: Product: RTL8187B_WLAN_Adapter
[ 1.363723] usb 1-5: Manufacturer: Manufacturer_Realtek
[ 1.363725] usb 1-5: SerialNumber: 00e04c000001
[ 1.363826] usb 1-5: configuration #1 chosen from 1 choice
[ 1.664012] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 1.876394] usb 3-1: New USB device found, idVendor=1c4f, idProduct=0002
[ 1.876399] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.876402] usb 3-1: Product: USB Keykoard
[ 1.876404] usb 3-1: Manufacturer: USB
[ 1.876489] usb 3-1: configuration #1 chosen from 1 choice
[ 1.885826] usbcore: registered new interface driver hiddev
[ 1.898637] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input0
[ 1.898671] generic-usb 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.1-1/input0
[ 1.914637] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input1
[ 1.914660] generic-usb 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.1-1/input1
[ 1.914672] usbcore: registered new interface driver usbhid
[ 1.914674] usbhid: v2.6:USB HID core driver
[ 2.116013] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 2.288516] usb 4-2: New USB device found, idVendor=1d57, idProduct=0008
[ 2.288520] usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.288523] usb 4-2: Product: 2.4G Wireless Optical Mouse
[ 2.288610] usb 4-2: configuration #1 chosen from 1 choice
[ 2.304730] input: 2.4G Wireless Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input2
[ 2.304770] generic-usb 0003:1D57:0008.0003: input,hidraw2: USB HID v1.10 Mouse [2.4G Wireless Optical Mouse] on usb-0000:00:1d.2-2/input0
[ 2.664953] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 3.868296] udev[467]: starting version 164
[ 4.174703] ACPI: SSDT 7ff90100 002FB (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 4.174893] processor LNXCPU:00: registered as cooling_device0
[ 4.175189] ACPI: SSDT 7ff90400 002FB (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 4.175358] processor LNXCPU:01: registered as cooling_device1
[ 4.384641] cfg80211: Using static regulatory domain info
[ 4.384643] cfg80211: Regulatory domain: US
[ 4.384644] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4.384646] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 4.384648] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 4.384650] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 4.384652] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 4.384653] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 4.384655] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 4.384823] cfg80211: Calling CRDA for country: US
[ 4.386708] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 4.386713] ACPI: Power Button [PWRB]
[ 4.386749] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.386752] ACPI: Power Button [PWRF]
[ 4.388383] parport_pc 00:06: reported by Plug and Play ACPI
[ 4.388484] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 4.503509] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.536325] intel_rng: FWH not detected
[ 5.191638] nvidia: module license 'NVIDIA' taints kernel.
[ 5.191641] Disabling lock debugging due to kernel taint
[ 5.960208] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.960214] nvidia 0000:01:00.0: setting latency timer to 64
[ 5.960218] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.960353] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.31 Tue Jun 1 22:08:27 PDT 2010
[ 6.302039] phy0: Selected rate control algorithm 'minstrel'
[ 6.302468] phy0: hwaddr 08:10:75:21:c6:03, RTL8187BvE V0 + rtl8225z2, rfkill mask 2
[ 6.323919] rtl8187: Customer ID is 0x00
[ 6.323950] Registered led device: rtl8187-phy0::tx
[ 6.323968] Registered led device: rtl8187-phy0::rx
[ 6.324661] rtl8187: wireless switch is on
[ 6.324691] usbcore: registered new interface driver rtl8187
[ 6.482173] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 6.482204] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.855296] hda_codec: ALC887: BIOS auto-probing.
[ 7.856625] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 8.428770] Adding 3905528k swap on /dev/sda6. Priority:-1 extents:1 across:3905528k
[ 8.772888] loop: module loaded
[ 8.958574] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 9.705327] fuse init (API version 7.13)
[ 11.786098] usb 1-5: USB disconnect, address 3
[ 16.216516] usb 1-5: new high speed USB device using ehci_hcd and address 5
[ 16.349521] usb 1-5: New USB device found, idVendor=0bda, idProduct=8176
[ 16.349526] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 16.349529] usb 1-5: Product: 802.11n WLAN Adapter
[ 16.349532] usb 1-5: Manufacturer: Realtek
[ 16.349534] usb 1-5: SerialNumber: 00e04c000001
[ 16.349635] usb 1-5: configuration #1 chosen from 1 choice
[ 17.852335] Bluetooth: Core ver 2.15
[ 17.852388] NET: Registered protocol family 31
[ 17.852390] Bluetooth: HCI device and connection manager initialized
[ 17.852393] Bluetooth: HCI socket layer initialized
[ 17.875555] Bluetooth: L2CAP ver 2.14
[ 17.875558] Bluetooth: L2CAP socket layer initialized
[ 17.910239] Bluetooth: RFCOMM TTY layer initialized
[ 17.910243] Bluetooth: RFCOMM socket layer initialized
[ 17.910246] Bluetooth: RFCOMM ver 1.11
[ 17.964736] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.964740] Bluetooth: BNEP filters: protocol multicast
[ 18.023413] Bridge firewalling registered
[ 18.186845] Bluetooth: SCO (Voice Link) ver 0.6
[ 18.186848] Bluetooth: SCO socket layer initialized
[ 18.322866] lp0: using parport0 (interrupt-driven).
[ 18.471916] ppdev: user-space parallel port driver
[ 19.882915] ATL1E 0000:02:00.0: irq 27 for MSI/MSI-X
[ 19.883028] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 30.756006] eth0: no IPv6 routers present
[ 724.816009] ------------[ cut here ]------------
[ 724.816018] WARNING: at /build/buildd-linux-2.6_2.6.32-43-i386-NP7dRC/linux-2.6-2.6.32/debian/build/source_i386_none/drivers/char/tty_ldisc.c:738 tty_ldisc_reinit+0x3e/0x6c()
[ 724.816022] Hardware name: System Product Name
[ 724.816024] Modules linked in: ppdev lp sco bridge stp bnep rfcomm l2cap bluetooth acpi_cpufreq cpufreq_stats cpufreq_userspace cpufreq_powersave cpufreq_conservative fuse loop snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device arc4 snd ecb soundcore snd_page_alloc nvidia(P) rtl8187 mac80211 led_class rng_core psmouse serio_raw pcspkr evdev asus_atk0110 joydev parport_pc button i2c_core cfg80211 rfkill eeprom_93cx6 parport processor ext4 mbcache jbd2 crc16 usbhid hid sg sd_mod sr_mod crc_t10dif cdrom ata_generic uhci_hcd ata_piix libata ehci_hcd thermal thermal_sys atl1e scsi_mod usbcore nls_base [last unloaded: scsi_wait_scan]
[ 724.816094] Pid: 2094, comm: login Tainted: P 2.6.32-5-686 #1
[ 724.816096] Call Trace:
[ 724.816103] [<c10309a5>] ? warn_slowpath_common+0x5e/0x8a
[ 724.816108] [<c10309db>] ? warn_slowpath_null+0xa/0xc
[ 724.816112] [<c11946ed>] ? tty_ldisc_reinit+0x3e/0x6c
[ 724.816116] [<c119480a>] ? tty_ldisc_hangup+0xef/0x172
[ 724.816120] [<c118ef6a>] ? do_tty_hangup+0xd0/0x2b1
[ 724.816124] [<c118f441>] ? disassociate_ctty+0x3b/0x1b3
[ 724.816128] [<c103381e>] ? do_exit+0x212/0x5cd
[ 724.816133] [<c1270d00>] ? do_page_fault+0x2f1/0x307
[ 724.816136] [<c1033c38>] ? do_group_exit+0x5f/0x82
[ 724.816140] [<c1033c6c>] ? sys_exit_group+0x11/0x14
[ 724.816144] [<c10030fb>] ? sysenter_do_call+0x12/0x28
[ 724.816147] ---[ end trace 755b1639024751fb ]---
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment