Skip to content

Instantly share code, notes, and snippets.

@wolfsage

wolfsage/gist:a2473d9a8ed1639d7f31 Secret

Last active August 29, 2015 14:19
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save wolfsage/a2473d9a8ed1639d7f31 to your computer and use it in GitHub Desktop.
Save wolfsage/a2473d9a8ed1639d7f31 to your computer and use it in GitHub Desktop.
Download ZIP
~/5.18.2/bin/cpan5.18.1 Inline::C 2>&1 | tee ~/out.txt
Raw
gistfile1.txt
CPAN: Storable loaded ok (v2.41)
Reading '/home/mhorsfall/.local/share/.cpan/Metadata'
Database was generated on Sun, 19 Apr 2015 09:53:31 GMT
Running install for module 'Inline::C'
Running make for I/IN/INGY/Inline-C-0.75.tar.gz
CPAN: Digest::SHA loaded ok (v5.84_01)
CPAN: Compress::Zlib loaded ok (v2.06)
Checksum for /home/mhorsfall/.local/share/.cpan/sources/authors/id/I/IN/INGY/Inline-C-0.75.tar.gz ok
CPAN: File::Temp loaded ok (v0.23)
CPAN: Parse::CPAN::Meta loaded ok (v1.4404)
CPAN: CPAN::Meta loaded ok (v2.120921)
CPAN: Module::CoreList loaded ok (v2.96)
---- Unsatisfied dependencies detected during ----
---- INGY/Inline-C-0.75.tar.gz ----
File::ShareDir::Install [build_requires]
Running make test
Make had some problems, won't test
Delayed until after prerequisites
Running make install
Make had some problems, won't install
Delayed until after prerequisites
Running install for module 'File::ShareDir::Install'
Running make for G/GW/GWYN/File-ShareDir-Install-0.10.tar.gz
Checksum for /home/mhorsfall/.local/share/.cpan/sources/authors/id/G/GW/GWYN/File-ShareDir-Install-0.10.tar.gz ok
CPAN.pm: Building G/GW/GWYN/File-ShareDir-Install-0.10.tar.gz
Checking if your kit is complete...
Looks good
Writing Makefile for File::ShareDir::Install
Writing MYMETA.yml and MYMETA.json
cp lib/File/ShareDir/Install.pm blib/lib/File/ShareDir/Install.pm
Manifying blib/man3/File::ShareDir::Install.3
GWYN/File-ShareDir-Install-0.10.tar.gz
/usr/bin/make -- OK
'YAML' not installed, will not store persistent state
Running make test
PERL_DL_NONLAZY=1 /home/mhorsfall/5.18.2/bin/perl5.18.1 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_compile.t ....... ok
t/01_pod.t ........... skipped: these tests are for authors only
t/02_pod_coverage.t .. skipped: these tests are for authors only
t/10_makefile.t ...... ok
t/11_dotfile.t ....... ok
t/12_delete.t ........ ok
All tests successful.
Files=6, Tests=33, 2 wallclock secs ( 0.04 usr 0.00 sys + 1.59 cusr 0.13 csys = 1.76 CPU)
Result: PASS
GWYN/File-ShareDir-Install-0.10.tar.gz
/usr/bin/make test -- OK
Running make install
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/File/ShareDir/Install.pm
Installing /home/mhorsfall/5.18.2/man/man3/File::ShareDir::Install.3
Appending installation info to /home/mhorsfall/5.18.2/lib/perl5/5.18.1/i686-linux/perllocal.pod
GWYN/File-ShareDir-Install-0.10.tar.gz
/usr/bin/make install -- OK
Running make for I/IN/INGY/Inline-C-0.75.tar.gz
CPAN.pm: Building I/IN/INGY/Inline-C-0.75.tar.gz
Warning: prerequisite ExtUtils::MakeMaker 7.00 not found. We have 6.66.
Warning: prerequisite Inline 0.79 not found.
Warning: prerequisite Parse::RecDescent 1.967009 not found.
Warning: prerequisite Pegex 0.58 not found.
Checking if your kit is complete...
Looks good
Writing Makefile for Inline::C
Writing MYMETA.yml and MYMETA.json
---- Unsatisfied dependencies detected during ----
---- INGY/Inline-C-0.75.tar.gz ----
Test::Warn [build_requires]
Pegex [requires]
Parse::RecDescent [requires]
Inline [requires]
IO::All [build_requires]
YAML::XS [build_requires]
File::Copy::Recursive [build_requires]
Running make test
Delayed until after prerequisites
Running make install
Delayed until after prerequisites
Running install for module 'Test::Warn'
Running make for C/CH/CHORNY/Test-Warn-0.30.tar.gz
Checksum for /home/mhorsfall/.local/share/.cpan/sources/authors/id/C/CH/CHORNY/Test-Warn-0.30.tar.gz ok
CPAN.pm: Building C/CH/CHORNY/Test-Warn-0.30.tar.gz
Warning: prerequisite Sub::Uplevel 0.12 not found.
Checking if your kit is complete...
Looks good
Writing Makefile for Test::Warn
Writing MYMETA.yml and MYMETA.json
---- Unsatisfied dependencies detected during ----
---- CHORNY/Test-Warn-0.30.tar.gz ----
Sub::Uplevel [requires]
Running make test
Delayed until after prerequisites
Running make install
Delayed until after prerequisites
Running install for module 'Sub::Uplevel'
Running make for D/DA/DAGOLDEN/Sub-Uplevel-0.25.tar.gz
Checksum for /home/mhorsfall/.local/share/.cpan/sources/authors/id/D/DA/DAGOLDEN/Sub-Uplevel-0.25.tar.gz ok
CPAN.pm: Building D/DA/DAGOLDEN/Sub-Uplevel-0.25.tar.gz
Checking if your kit is complete...
Looks good
Writing Makefile for Sub::Uplevel
Writing MYMETA.yml and MYMETA.json
cp lib/Sub/Uplevel.pm blib/lib/Sub/Uplevel.pm
Manifying blib/man3/Sub::Uplevel.3
DAGOLDEN/Sub-Uplevel-0.25.tar.gz
/usr/bin/make -- OK
Running make test
PERL_DL_NONLAZY=1 /home/mhorsfall/5.18.2/bin/perl5.18.1 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
#
# Versions for all modules listed in MYMETA.json (including optional ones):
#
# === Configure Requires ===
#
# Module Want Have
# ------------------- ---- ----
# ExtUtils::MakeMaker 6.17 6.66
#
# === Build Requires ===
#
# Module Want Have
# ------------------- ---- ----
# ExtUtils::MakeMaker any 6.66
#
# === Test Requires ===
#
# Module Want Have
# ------------------- ---- ----
# Exporter any 5.68
# ExtUtils::MakeMaker any 6.66
# File::Spec any 3.40
# Test::More any 0.98
#
# === Test Recommends ===
#
# Module Want Have
# ---------- -------- --------
# CPAN::Meta 2.120900 2.120921
#
# === Runtime Requires ===
#
# Module Want Have
# -------- ---- ----
# Carp any 1.29
# constant any 1.27
# strict any 1.07
# warnings any 1.18
#
t/00-report-prereqs.t ........ ok
t/01_die_check.t ............. ok
t/02_uplevel.t ............... ok
t/03_nested_uplevels.t ....... ok
t/04_honor_later_override.t .. ok
t/05_honor_prior_override.t .. ok
t/06_db_args.t ............... ok
t/07_uplevel_too_high.t ...... ok
t/08_exporter.t .............. ok
t/09_emptylist.t ............. ok
All tests successful.
Files=10, Tests=158, 1 wallclock secs ( 0.05 usr 0.02 sys + 0.45 cusr 0.01 csys = 0.53 CPU)
Result: PASS
DAGOLDEN/Sub-Uplevel-0.25.tar.gz
/usr/bin/make test -- OK
Running make install
Manifying blib/man3/Sub::Uplevel.3
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Sub/Uplevel.pm
Installing /home/mhorsfall/5.18.2/man/man3/Sub::Uplevel.3
Appending installation info to /home/mhorsfall/5.18.2/lib/perl5/5.18.1/i686-linux/perllocal.pod
DAGOLDEN/Sub-Uplevel-0.25.tar.gz
/usr/bin/make install -- OK
Running make for C/CH/CHORNY/Test-Warn-0.30.tar.gz
Has already been unwrapped into directory /home/mhorsfall/.local/share/.cpan/build/Test-Warn-0.30-YFHVBR
CPAN.pm: Building C/CH/CHORNY/Test-Warn-0.30.tar.gz
cp Warn.pm blib/lib/Test/Warn.pm
Manifying blib/man3/Test::Warn.3
CHORNY/Test-Warn-0.30.tar.gz
/usr/bin/make -- OK
Running make test
PERL_DL_NONLAZY=1 /home/mhorsfall/5.18.2/bin/perl5.18.1 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/1.t ............... ok
t/carped.t .......... ok
t/warning_is.t ...... ok
t/warning_like.t .... ok
t/warnings_are.t .... ok
t/warnings_exist.t .. ok
t/warnings_like.t ... ok
All tests successful.
Files=7, Tests=835, 3 wallclock secs ( 0.14 usr 0.02 sys + 3.34 cusr 0.03 csys = 3.53 CPU)
Result: PASS
CHORNY/Test-Warn-0.30.tar.gz
/usr/bin/make test -- OK
Running make install
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Test/Warn.pm
Installing /home/mhorsfall/5.18.2/man/man3/Test::Warn.3
Appending installation info to /home/mhorsfall/5.18.2/lib/perl5/5.18.1/i686-linux/perllocal.pod
CHORNY/Test-Warn-0.30.tar.gz
/usr/bin/make install -- OK
Running install for module 'Pegex'
Running make for I/IN/INGY/Pegex-0.60.tar.gz
Checksum for /home/mhorsfall/.local/share/.cpan/sources/authors/id/I/IN/INGY/Pegex-0.60.tar.gz ok
CPAN.pm: Building I/IN/INGY/Pegex-0.60.tar.gz
Checking if your kit is complete...
Looks good
Writing Makefile for Pegex
Writing MYMETA.yml and MYMETA.json
---- Unsatisfied dependencies detected during ----
---- INGY/Pegex-0.60.tar.gz ----
YAML::XS [build_requires]
Running make test
Delayed until after prerequisites
Running make install
Delayed until after prerequisites
Running install for module 'YAML::XS'
Running make for I/IN/INGY/YAML-LibYAML-0.59.tar.gz
Checksum for /home/mhorsfall/.local/share/.cpan/sources/authors/id/I/IN/INGY/YAML-LibYAML-0.59.tar.gz ok
CPAN.pm: Building I/IN/INGY/YAML-LibYAML-0.59.tar.gz
Checking if your kit is complete...
Looks good
Writing Makefile for YAML::XS::LibYAML
Writing MYMETA.yml and MYMETA.json
Writing Makefile for YAML::LibYAML
Writing MYMETA.yml and MYMETA.json
cp lib/YAML/LibYAML.pm blib/lib/YAML/LibYAML.pm
cp lib/YAML/LibYAML.pod blib/lib/YAML/LibYAML.pod
cp lib/YAML/XS.pod blib/lib/YAML/XS.pod
cp lib/YAML/XS.pm blib/lib/YAML/XS.pm
make[1]: Entering directory `/home/mhorsfall/.local/share/.cpan/build/YAML-LibYAML-0.59-dDEnUw/LibYAML'
cp lib/YAML/XS/LibYAML.pm ../blib/lib/YAML/XS/LibYAML.pm
cc -c -I. -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/home/mhorsfall/5.18.2/lib/perl5/5.18.1/i686-linux/CORE" -DHAVE_CONFIG_H api.c
cc -c -I. -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/home/mhorsfall/5.18.2/lib/perl5/5.18.1/i686-linux/CORE" -DHAVE_CONFIG_H dumper.c
cc -c -I. -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/home/mhorsfall/5.18.2/lib/perl5/5.18.1/i686-linux/CORE" -DHAVE_CONFIG_H emitter.c
cc -c -I. -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/home/mhorsfall/5.18.2/lib/perl5/5.18.1/i686-linux/CORE" -DHAVE_CONFIG_H loader.c
cc -c -I. -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/home/mhorsfall/5.18.2/lib/perl5/5.18.1/i686-linux/CORE" -DHAVE_CONFIG_H parser.c
cc -c -I. -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/home/mhorsfall/5.18.2/lib/perl5/5.18.1/i686-linux/CORE" -DHAVE_CONFIG_H perl_libyaml.c
cc -c -I. -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/home/mhorsfall/5.18.2/lib/perl5/5.18.1/i686-linux/CORE" -DHAVE_CONFIG_H reader.c
cc -c -I. -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/home/mhorsfall/5.18.2/lib/perl5/5.18.1/i686-linux/CORE" -DHAVE_CONFIG_H scanner.c
cc -c -I. -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/home/mhorsfall/5.18.2/lib/perl5/5.18.1/i686-linux/CORE" -DHAVE_CONFIG_H writer.c
/home/mhorsfall/5.18.2/bin/perl5.18.1 /home/mhorsfall/5.18.2/lib/perl5/5.18.1/ExtUtils/xsubpp -typemap /home/mhorsfall/5.18.2/lib/perl5/5.18.1/ExtUtils/typemap LibYAML.xs > LibYAML.xsc && mv LibYAML.xsc LibYAML.c
cc -c -I. -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/home/mhorsfall/5.18.2/lib/perl5/5.18.1/i686-linux/CORE" -DHAVE_CONFIG_H LibYAML.c
Running Mkbootstrap for YAML::XS::LibYAML ()
chmod 644 LibYAML.bs
rm -f ../blib/arch/auto/YAML/XS/LibYAML/LibYAML.so
cc -shared -O2 -L/usr/local/lib -fstack-protector api.o dumper.o emitter.o loader.o parser.o perl_libyaml.o reader.o scanner.o writer.o LibYAML.o -o ../blib/arch/auto/YAML/XS/LibYAML/LibYAML.so \
\
chmod 755 ../blib/arch/auto/YAML/XS/LibYAML/LibYAML.so
cp LibYAML.bs ../blib/arch/auto/YAML/XS/LibYAML/LibYAML.bs
chmod 644 ../blib/arch/auto/YAML/XS/LibYAML/LibYAML.bs
Manifying ../blib/man3/YAML::XS::LibYAML.3
make[1]: Leaving directory `/home/mhorsfall/.local/share/.cpan/build/YAML-LibYAML-0.59-dDEnUw/LibYAML'
Manifying blib/man3/YAML::XS.3
Manifying blib/man3/YAML::LibYAML.3
INGY/YAML-LibYAML-0.59.tar.gz
/usr/bin/make -- OK
Running make test
make[1]: Entering directory `/home/mhorsfall/.local/share/.cpan/build/YAML-LibYAML-0.59-dDEnUw/LibYAML'
make[1]: Leaving directory `/home/mhorsfall/.local/share/.cpan/build/YAML-LibYAML-0.59-dDEnUw/LibYAML'
PERL_DL_NONLAZY=1 /home/mhorsfall/5.18.2/bin/perl5.18.1 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/000-require-modules.t .. ok
t/alias.t ................ ok
t/api.t .................. ok
t/ascii.t ................ ok
t/blessed.t .............. ok
t/boolean.t .............. ok
t/bug-pvf.t .............. ok
t/bug-stack.t ............ ok
t/code.t ................. ok
t/dump-heuristics.t ...... ok
t/dump.t ................. ok
t/empty.t ................ ok
t/error.t ................ ok
t/file.t ................. ok
t/glob.t ................. ok
t/leak.t ................. ok
t/load.t ................. ok
t/loadfile-empty.t ....... ok
t/long_plain_wrap.t ...... skipped: Failing test. Not yet implemented
t/magic.t ................ ok
t/native.t ............... ok
t/null.t ................. ok
t/numbers.t .............. ok
t/pl_sv_undef.t .......... ok
t/private.t .............. ok
t/quote.t ................ ok
t/ref-scalar.t ........... ok
t/regexp.t ............... ok
t/release-pod-syntax.t ... skipped: these tests are for release candidate testing
t/string_nulls.t ......... ok
t/tags.t ................. ok
t/tied.t ................. ok
t/utf8.t ................. ok
All tests successful.
Files=33, Tests=272, 4 wallclock secs ( 0.11 usr 0.04 sys + 3.11 cusr 0.22 csys = 3.48 CPU)
Result: PASS
make[1]: Entering directory `/home/mhorsfall/.local/share/.cpan/build/YAML-LibYAML-0.59-dDEnUw/LibYAML'
PERL_DL_NONLAZY=1 /home/mhorsfall/5.18.2/bin/perl5.18.1 "-I../blib/lib" "-I../blib/arch" test.pl
1..1
ok 1 - Tests for libyaml extension are all defined at the top level
make[1]: Leaving directory `/home/mhorsfall/.local/share/.cpan/build/YAML-LibYAML-0.59-dDEnUw/LibYAML'
INGY/YAML-LibYAML-0.59.tar.gz
/usr/bin/make test -- OK
Running make install
make[1]: Entering directory `/home/mhorsfall/.local/share/.cpan/build/YAML-LibYAML-0.59-dDEnUw/LibYAML'
make[1]: Leaving directory `/home/mhorsfall/.local/share/.cpan/build/YAML-LibYAML-0.59-dDEnUw/LibYAML'
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/i686-linux/auto/YAML/XS/LibYAML/LibYAML.bs
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/i686-linux/auto/YAML/XS/LibYAML/LibYAML.so
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/i686-linux/YAML/LibYAML.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/i686-linux/YAML/LibYAML.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/i686-linux/YAML/XS.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/i686-linux/YAML/XS.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/i686-linux/YAML/XS/LibYAML.pm
Installing /home/mhorsfall/5.18.2/man/man3/YAML::XS::LibYAML.3
Installing /home/mhorsfall/5.18.2/man/man3/YAML::XS.3
Installing /home/mhorsfall/5.18.2/man/man3/YAML::LibYAML.3
Appending installation info to /home/mhorsfall/5.18.2/lib/perl5/5.18.1/i686-linux/perllocal.pod
INGY/YAML-LibYAML-0.59.tar.gz
/usr/bin/make install -- OK
Running make for I/IN/INGY/Pegex-0.60.tar.gz
Has already been unwrapped into directory /home/mhorsfall/.local/share/.cpan/build/Pegex-0.60-gfY2V9
CPAN.pm: Building I/IN/INGY/Pegex-0.60.tar.gz
cp share/pegex.pgx blib/lib/auto/share/dist/Pegex/pegex.pgx
cp lib/Pegex/Tutorial/JSON.pod blib/lib/Pegex/Tutorial/JSON.pod
cp lib/Pegex/Compiler.pod blib/lib/Pegex/Compiler.pod
cp lib/Pegex/Tutorial/Calculator.pod blib/lib/Pegex/Tutorial/Calculator.pod
cp lib/Pegex/Optimizer.pm blib/lib/Pegex/Optimizer.pm
cp lib/Pegex/Syntax.pod blib/lib/Pegex/Syntax.pod
cp lib/Pegex/Miscellany.pod blib/lib/Pegex/Miscellany.pod
cp lib/Pegex/Overview.pod blib/lib/Pegex/Overview.pod
cp lib/Pegex/Receiver.pod blib/lib/Pegex/Receiver.pod
cp lib/Pegex/Pegex/AST.pm blib/lib/Pegex/Pegex/AST.pm
cp lib/Pegex/Grammar.pm blib/lib/Pegex/Grammar.pm
cp lib/Pegex/Parser/Indent.pm blib/lib/Pegex/Parser/Indent.pm
cp lib/Pegex/Base.pm blib/lib/Pegex/Base.pm
cp lib/Pegex/Tree.pod blib/lib/Pegex/Tree.pod
cp lib/Pegex.pod blib/lib/Pegex.pod
cp lib/Pegex/API.pod blib/lib/Pegex/API.pod
cp lib/Pegex/Resources.pod blib/lib/Pegex/Resources.pod
cp lib/Pegex/Bootstrap.pod blib/lib/Pegex/Bootstrap.pod
cp lib/Pegex/Bootstrap.pm blib/lib/Pegex/Bootstrap.pm
cp lib/Pegex/Grammar/Atoms.pod blib/lib/Pegex/Grammar/Atoms.pod
cp lib/Pegex/Input.pm blib/lib/Pegex/Input.pm
cp lib/Pegex/Module.pm blib/lib/Pegex/Module.pm
cp lib/Pegex/Tree.pm blib/lib/Pegex/Tree.pm
cp lib/Pegex.pm blib/lib/Pegex.pm
cp lib/Pegex/Module.pod blib/lib/Pegex/Module.pod
cp lib/Pegex/Pegex/Grammar.pm blib/lib/Pegex/Pegex/Grammar.pm
cp lib/Pegex/Grammar.pod blib/lib/Pegex/Grammar.pod
cp lib/Pegex/Pegex/Grammar.pod blib/lib/Pegex/Pegex/Grammar.pod
cp lib/Pegex/Input.pod blib/lib/Pegex/Input.pod
cp lib/Pegex/Parser.pod blib/lib/Pegex/Parser.pod
cp lib/Pegex/Receiver.pm blib/lib/Pegex/Receiver.pm
cp lib/Pegex/Regex.pm blib/lib/Pegex/Regex.pm
cp lib/Pegex/Tree/Wrap.pod blib/lib/Pegex/Tree/Wrap.pod
cp lib/Pegex/Tutorial.pod blib/lib/Pegex/Tutorial.pod
cp lib/Pegex/Parser.pm blib/lib/Pegex/Parser.pm
cp lib/Pegex/Compiler.pm blib/lib/Pegex/Compiler.pm
cp lib/Pegex/Regex.pod blib/lib/Pegex/Regex.pod
cp lib/Pegex/Grammar/Atoms.pm blib/lib/Pegex/Grammar/Atoms.pm
cp lib/Pegex/Tree/Wrap.pm blib/lib/Pegex/Tree/Wrap.pm
Manifying blib/man3/Pegex::Miscellany.3
Manifying blib/man3/Pegex::Receiver.3
Manifying blib/man3/Pegex::Compiler.3
Manifying blib/man3/Pegex::Tree.3
Manifying blib/man3/Pegex::API.3
Manifying blib/man3/Pegex::Parser.3
Manifying blib/man3/Pegex::Overview.3
Manifying blib/man3/Pegex::Regex.3
Manifying blib/man3/Pegex::Grammar::Atoms.3
Manifying blib/man3/Pegex::Tutorial::Calculator.3
Manifying blib/man3/Pegex::Bootstrap.3
Manifying blib/man3/Pegex::Grammar.3
Manifying blib/man3/Pegex::Tutorial.3
Manifying blib/man3/Pegex::Pegex::Grammar.3
Manifying blib/man3/Pegex::Module.3
Manifying blib/man3/Pegex::Tutorial::JSON.3
Manifying blib/man3/Pegex.3
Manifying blib/man3/Pegex::Resources.3
Manifying blib/man3/Pegex::Tree::Wrap.3
Manifying blib/man3/Pegex::Input.3
Manifying blib/man3/Pegex::Syntax.3
INGY/Pegex-0.60.tar.gz
/usr/bin/make -- OK
Running make test
Skip blib/lib/auto/share/dist/Pegex/pegex.pgx (unchanged)
PERL_DL_NONLAZY=1 /home/mhorsfall/5.18.2/bin/perl5.18.1 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/000-compile-modules.t .......... ok
t/api.t .......................... ok
t/export-api.t ................... ok
t/flatten.t ...................... ok
t/function-rule.t ................ ok
t/grammar-api.t .................. ok
t/parse.t ........................ ok
t/release-pod-syntax.t ........... skipped: these tests are for release candidate testing
t/repeat.t ....................... ok
t/safe.t ......................... ok
try_contact >Name: Ingy Net\nPhone: 919-876-...<
try_name_section >Name: Ingy Net\nPhone: 919-876-...<
try_name >Ingy Net\nPhone: 919-876-5432\nA...<
got_name
try_EOL >\nPhone: 919-876-5432\nAddress:\n...<
got_EOL
got_name_section
try_phone_section >Phone: 919-876-5432\nAddress:\n ...<
try_phone_number >919-876-5432\nAddress:\n 1234 M...<
try_term >919-876-5432\nAddress:\n 1234 M...<
got_term
got_phone_number
try_EOL >\nAddress:\n 1234 Main St\n Nic...<
got_EOL
got_phone_section
try_address_section >Address:\n 1234 Main St\n Nice...<
try_street_line > 1234 Main St\n Niceville\n O...<
try_indent > 1234 Main St\n Niceville\n O...<
got_indent
try_street >1234 Main St\n Niceville\n OK\n<
got_street
try_EOL >\n Niceville\n OK\n<
got_EOL
got_street_line
try_city_line > Niceville\n OK\n<
try_indent > Niceville\n OK\n<
got_indent
try_city >Niceville\n OK\n<
try_term >Niceville\n OK\n<
got_term
got_city
try_EOL >\n OK\n<
got_EOL
got_city_line
try_country_line > OK\n<
try_indent > OK\n<
got_indent
try_country >OK\n<
try_term >OK\n<
got_term
got_country
try_EOL >\n<
got_EOL
got_country_line
got_address_section
got_contact
t/sample.t ....................... ok
t/testml-compiler-checks.t ....... ok
t/testml-compiler-equivalence.t .. ok
t/testml-compiler.t .............. ok
t/testml-error.t ................. ok
t/testml-optimize.t .............. ok
t/testml-tree-pegex.t ............ ok
t/testml-tree.t .................. ok
All tests successful.
Files=18, Tests=264, 3 wallclock secs ( 0.07 usr 0.03 sys + 2.20 cusr 0.11 csys = 2.41 CPU)
Result: PASS
INGY/Pegex-0.60.tar.gz
/usr/bin/make test -- OK
Running make install
Skip blib/lib/auto/share/dist/Pegex/pegex.pgx (unchanged)
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/auto/share/dist/Pegex/pegex.pgx
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Module.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Resources.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Input.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Input.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Receiver.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Base.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Grammar.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Tree.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Tree.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Regex.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Syntax.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Optimizer.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Bootstrap.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Regex.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Bootstrap.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Overview.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Compiler.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/API.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Module.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Parser.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Tutorial.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Grammar.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Parser.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Compiler.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Miscellany.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Receiver.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Parser/Indent.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Tree/Wrap.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Tree/Wrap.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Tutorial/JSON.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Tutorial/Calculator.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Grammar/Atoms.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Grammar/Atoms.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Pegex/Grammar.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Pegex/AST.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Pegex/Pegex/Grammar.pod
Installing /home/mhorsfall/5.18.2/man/man3/Pegex.3
Installing /home/mhorsfall/5.18.2/man/man3/Pegex::Miscellany.3
Installing /home/mhorsfall/5.18.2/man/man3/Pegex::Tree::Wrap.3
Installing /home/mhorsfall/5.18.2/man/man3/Pegex::Syntax.3
Installing /home/mhorsfall/5.18.2/man/man3/Pegex::API.3
Installing /home/mhorsfall/5.18.2/man/man3/Pegex::Parser.3
Installing /home/mhorsfall/5.18.2/man/man3/Pegex::Tree.3
Installing /home/mhorsfall/5.18.2/man/man3/Pegex::Bootstrap.3
Installing /home/mhorsfall/5.18.2/man/man3/Pegex::Overview.3
Installing /home/mhorsfall/5.18.2/man/man3/Pegex::Tutorial::Calculator.3
Installing /home/mhorsfall/5.18.2/man/man3/Pegex::Pegex::Grammar.3
Installing /home/mhorsfall/5.18.2/man/man3/Pegex::Tutorial::JSON.3
Installing /home/mhorsfall/5.18.2/man/man3/Pegex::Resources.3
Installing /home/mhorsfall/5.18.2/man/man3/Pegex::Grammar.3
Installing /home/mhorsfall/5.18.2/man/man3/Pegex::Grammar::Atoms.3
Installing /home/mhorsfall/5.18.2/man/man3/Pegex::Module.3
Installing /home/mhorsfall/5.18.2/man/man3/Pegex::Input.3
Installing /home/mhorsfall/5.18.2/man/man3/Pegex::Receiver.3
Installing /home/mhorsfall/5.18.2/man/man3/Pegex::Tutorial.3
Installing /home/mhorsfall/5.18.2/man/man3/Pegex::Regex.3
Installing /home/mhorsfall/5.18.2/man/man3/Pegex::Compiler.3
Appending installation info to /home/mhorsfall/5.18.2/lib/perl5/5.18.1/i686-linux/perllocal.pod
INGY/Pegex-0.60.tar.gz
/usr/bin/make install -- OK
Running install for module 'Parse::RecDescent'
Running make for J/JT/JTBRAUN/Parse-RecDescent-1.967009.tar.gz
Checksum for /home/mhorsfall/.local/share/.cpan/sources/authors/id/J/JT/JTBRAUN/Parse-RecDescent-1.967009.tar.gz ok
CPAN: Module::Build loaded ok (v0.4003)
CPAN.pm: Building J/JT/JTBRAUN/Parse-RecDescent-1.967009.tar.gz
Created MYMETA.yml and MYMETA.json
Creating new 'Build' script for 'Parse-RecDescent' version '1.967009'
Building Parse-RecDescent
JTBRAUN/Parse-RecDescent-1.967009.tar.gz
./Build -- OK
Running Build test
# Testing Parse::RecDescent 1.967009
t/00.load.t ............... ok
t/01.basics.t ............. ok
t/autotree.t .............. ok
t/leftop_cap.t ............ ok
t/pod.t ................... skipped: Test::Pod 1.14 required for testing POD
t/precompile.t ............ ok
t/re_capture_return.t ..... ok
t/reentry.t ............... ok
t/separated_repetition.t .. ok
t/skip.t .................. ok
t/skip_dynamic.t .......... ok
t/text.t .................. ok
All tests successful.
Files=12, Tests=93, 1 wallclock secs ( 0.06 usr 0.02 sys + 1.07 cusr 0.05 csys = 1.20 CPU)
Result: PASS
JTBRAUN/Parse-RecDescent-1.967009.tar.gz
./Build test -- OK
Running Build install
Building Parse-RecDescent
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Parse/RecDescent.pm
Installing /home/mhorsfall/5.18.2/man/man3/Parse::RecDescent.3
JTBRAUN/Parse-RecDescent-1.967009.tar.gz
./Build install -- OK
Running install for module 'Inline'
Running make for I/IN/INGY/Inline-0.80.tar.gz
Checksum for /home/mhorsfall/.local/share/.cpan/sources/authors/id/I/IN/INGY/Inline-0.80.tar.gz ok
CPAN.pm: Building I/IN/INGY/Inline-0.80.tar.gz
Checking if your kit is complete...
Looks good
Writing Makefile for Inline
Writing MYMETA.yml and MYMETA.json
cp lib/Inline/Foo.pm blib/lib/Inline/Foo.pm
cp lib/Inline/denter.pm blib/lib/Inline/denter.pm
cp lib/Inline.pm blib/lib/Inline.pm
cp lib/Inline/Support.pod blib/lib/Inline/Support.pod
cp lib/Inline/MakeMaker.pm blib/lib/Inline/MakeMaker.pm
cp lib/Inline/MakeMaker/Changes blib/lib/Inline/MakeMaker/Changes
cp lib/Inline/API.pod blib/lib/Inline/API.pod
cp lib/Inline.pod blib/lib/Inline.pod
cp lib/Inline/FAQ.pod blib/lib/Inline/FAQ.pod
Manifying blib/man3/Inline::API.3
Manifying blib/man3/Inline::Support.3
Manifying blib/man3/Inline.3
Manifying blib/man3/Inline::FAQ.3
INGY/Inline-0.80.tar.gz
/usr/bin/make -- OK
Running make test
PERL_DL_NONLAZY=1 /home/mhorsfall/5.18.2/bin/perl5.18.1 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/000-require-modules.t .. ok
t/01usages.t ............. ok
t/02config.t ............. ok
t/03errors.t ............. ok
t/04create.t ............. ok
Skipping - couldn't load the Inline::Files module
t/05files.t .............. ok
t/06rewrite_config.t ..... ok
t/07rewrite2_config.t .... ok
t/release-pod-syntax.t ... skipped: these tests are for release candidate testing
All tests successful.
Files=9, Tests=25, 2 wallclock secs ( 0.06 usr 0.01 sys + 1.91 cusr 0.12 csys = 2.10 CPU)
Result: PASS
INGY/Inline-0.80.tar.gz
/usr/bin/make test -- OK
Running make install
Manifying blib/man3/Inline::API.3
Manifying blib/man3/Inline::Support.3
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Inline.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Inline.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Inline/denter.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Inline/FAQ.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Inline/Foo.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Inline/API.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Inline/Support.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Inline/MakeMaker.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/Inline/MakeMaker/Changes
Installing /home/mhorsfall/5.18.2/man/man3/Inline::FAQ.3
Installing /home/mhorsfall/5.18.2/man/man3/Inline::API.3
Installing /home/mhorsfall/5.18.2/man/man3/Inline::Support.3
Installing /home/mhorsfall/5.18.2/man/man3/Inline.3
Appending installation info to /home/mhorsfall/5.18.2/lib/perl5/5.18.1/i686-linux/perllocal.pod
INGY/Inline-0.80.tar.gz
/usr/bin/make install -- OK
Running install for module 'IO::All'
Running make for I/IN/INGY/IO-All-0.86.tar.gz
Checksum for /home/mhorsfall/.local/share/.cpan/sources/authors/id/I/IN/INGY/IO-All-0.86.tar.gz ok
CPAN.pm: Building I/IN/INGY/IO-All-0.86.tar.gz
Checking if your kit is complete...
Looks good
Writing Makefile for IO::All
Writing MYMETA.yml and MYMETA.json
cp lib/IO/All/DBM.pod blib/lib/IO/All/DBM.pod
cp lib/IO/All/Dir.pm blib/lib/IO/All/Dir.pm
cp lib/IO/All/STDIO.pod blib/lib/IO/All/STDIO.pod
cp lib/IO/All/Temp.pod blib/lib/IO/All/Temp.pod
cp lib/IO/All/MLDBM.pod blib/lib/IO/All/MLDBM.pod
cp lib/IO/All/Link.pod blib/lib/IO/All/Link.pod
cp lib/IO/All/Socket.pod blib/lib/IO/All/Socket.pod
cp lib/IO/All.pod blib/lib/IO/All.pod
cp lib/IO/All/STDIO.pm blib/lib/IO/All/STDIO.pm
cp lib/IO/All/Pipe.pod blib/lib/IO/All/Pipe.pod
cp lib/IO/All/String.pod blib/lib/IO/All/String.pod
cp lib/IO/All/Link.pm blib/lib/IO/All/Link.pm
cp lib/IO/All/String.pm blib/lib/IO/All/String.pm
cp lib/IO/All/File.pod blib/lib/IO/All/File.pod
cp lib/IO/All/MLDBM.pm blib/lib/IO/All/MLDBM.pm
cp lib/IO/All/DBM.pm blib/lib/IO/All/DBM.pm
cp lib/IO/All/Filesys.pod blib/lib/IO/All/Filesys.pod
cp lib/IO/All.pm blib/lib/IO/All.pm
cp lib/IO/All/Pipe.pm blib/lib/IO/All/Pipe.pm
cp lib/IO/All/Dir.pod blib/lib/IO/All/Dir.pod
cp lib/IO/All/Temp.pm blib/lib/IO/All/Temp.pm
cp lib/IO/All/Filesys.pm blib/lib/IO/All/Filesys.pm
cp lib/IO/All/File.pm blib/lib/IO/All/File.pm
cp lib/IO/All/Base.pm blib/lib/IO/All/Base.pm
cp lib/IO/All/Socket.pm blib/lib/IO/All/Socket.pm
Manifying blib/man3/IO::All::STDIO.3
Manifying blib/man3/IO::All.3
Manifying blib/man3/IO::All::DBM.3
Manifying blib/man3/IO::All::MLDBM.3
Manifying blib/man3/IO::All::Temp.3
Manifying blib/man3/IO::All::Dir.3
Manifying blib/man3/IO::All::Filesys.3
Manifying blib/man3/IO::All::Socket.3
Manifying blib/man3/IO::All::File.3
Manifying blib/man3/IO::All::Link.3
Manifying blib/man3/IO::All::Pipe.3
Manifying blib/man3/IO::All::String.3
INGY/IO-All-0.86.tar.gz
/usr/bin/make -- OK
Running make test
PERL_DL_NONLAZY=1 /home/mhorsfall/5.18.2/bin/perl5.18.1 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/000-compile-modules.t .. ok
t/absolute.t ............. ok
t/accept.t ............... ok
t/all.t .................. ok
t/all2.t ................. ok
t/append.t ............... ok
t/assert.t ............... ok
t/assert2.t .............. ok
t/autotie.t .............. ok
t/backwards.t ............ skipped: requires File::ReadBackwards
t/binary_utf8.t .......... ok
t/chdir.t ................ ok
t/chomp.t ................ ok
t/construct.t ............ ok
t/copy.t ................. ok
t/dbm.t .................. ok
t/devnull.t .............. ok
t/empty.t ................ ok
t/encoding.t ............. ok
t/error1.t ............... ok
t/file_spec.t ............ ok
t/file_subclass.t ........ ok
t/fileno.t ............... ok
t/glob.t ................. ok
t/head.t ................. ok
t/import_flags.t ......... ok
t/in-place.t ............. ok
t/inline_subclass.t ...... ok
t/input.t ................ ok
t/link.t ................. ok
t/link2.t ................ ok
t/lock.t ................. ok
t/mldbm.t ................ skipped: requires MLDBM
t/new.t .................. ok
t/os.t ................... ok
t/overload.t ............. ok
t/pipe.t ................. ok
t/print.t ................ ok
t/println.t .............. ok
t/read.t ................. ok
t/read_write.t ........... ok
t/release-pod-syntax.t ... skipped: these tests are for release candidate testing
t/round_robin.t .......... ok
t/rt-41819.t ............. ok
t/RT81224.t .............. ok
t/scalar.t ............... ok
t/seek.t ................. ok
t/separator.t ............ ok
t/stat.t ................. ok
t/string_open.t .......... ok
t/subtleties.t ........... ok
t/synopsis1.t ............ ok
t/synopsis2.t ............ ok
t/synopsis3.t ............ ok
t/synopsis5.t ............ ok
t/tie.t .................. ok
t/tie_file.t ............. ok
t/xxx.t .................. ok
All tests successful.
Test Summary Report
-------------------
t/os.t (Wstat: 0 Tests: 14 Failed: 0)
TODO passed: 5-6
Files=58, Tests=391, 7 wallclock secs ( 0.19 usr 0.07 sys + 4.52 cusr 0.38 csys = 5.16 CPU)
Result: PASS
INGY/IO-All-0.86.tar.gz
/usr/bin/make test -- OK
Running make install
Manifying blib/man3/IO::All::STDIO.3
Manifying blib/man3/IO::All.3
Manifying blib/man3/IO::All::DBM.3
Manifying blib/man3/IO::All::MLDBM.3
Manifying blib/man3/IO::All::Temp.3
Manifying blib/man3/IO::All::Dir.3
Manifying blib/man3/IO::All::Filesys.3
Manifying blib/man3/IO::All::Socket.3
Manifying blib/man3/IO::All::File.3
Manifying blib/man3/IO::All::Link.3
Manifying blib/man3/IO::All::Pipe.3
Manifying blib/man3/IO::All::String.3
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/MLDBM.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/DBM.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/STDIO.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/Pipe.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/Base.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/Filesys.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/Link.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/Link.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/Socket.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/Dir.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/String.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/DBM.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/Pipe.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/Socket.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/Filesys.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/STDIO.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/String.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/File.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/Dir.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/MLDBM.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/Temp.pm
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/Temp.pod
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/IO/All/File.pm
Installing /home/mhorsfall/5.18.2/man/man3/IO::All::DBM.3
Installing /home/mhorsfall/5.18.2/man/man3/IO::All::Dir.3
Installing /home/mhorsfall/5.18.2/man/man3/IO::All::Temp.3
Installing /home/mhorsfall/5.18.2/man/man3/IO::All::File.3
Installing /home/mhorsfall/5.18.2/man/man3/IO::All::Pipe.3
Installing /home/mhorsfall/5.18.2/man/man3/IO::All::Link.3
Installing /home/mhorsfall/5.18.2/man/man3/IO::All::String.3
Installing /home/mhorsfall/5.18.2/man/man3/IO::All::Filesys.3
Installing /home/mhorsfall/5.18.2/man/man3/IO::All::MLDBM.3
Installing /home/mhorsfall/5.18.2/man/man3/IO::All.3
Installing /home/mhorsfall/5.18.2/man/man3/IO::All::STDIO.3
Installing /home/mhorsfall/5.18.2/man/man3/IO::All::Socket.3
Appending installation info to /home/mhorsfall/5.18.2/lib/perl5/5.18.1/i686-linux/perllocal.pod
INGY/IO-All-0.86.tar.gz
/usr/bin/make install -- OK
Running install for module 'File::Copy::Recursive'
Running make for D/DM/DMUEY/File-Copy-Recursive-0.38.tar.gz
Checksum for /home/mhorsfall/.local/share/.cpan/sources/authors/id/D/DM/DMUEY/File-Copy-Recursive-0.38.tar.gz ok
CPAN.pm: Building D/DM/DMUEY/File-Copy-Recursive-0.38.tar.gz
Checking if your kit is complete...
Looks good
Writing Makefile for File::Copy::Recursive
Writing MYMETA.yml and MYMETA.json
cp Recursive.pm blib/lib/File/Copy/Recursive.pm
Manifying blib/man3/File::Copy::Recursive.3
DMUEY/File-Copy-Recursive-0.38.tar.gz
/usr/bin/make -- OK
Running make test
PERL_DL_NONLAZY=1 /home/mhorsfall/5.18.2/bin/perl5.18.1 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/1.t .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.03 cusr 0.00 csys = 0.05 CPU)
Result: PASS
DMUEY/File-Copy-Recursive-0.38.tar.gz
/usr/bin/make test -- OK
Running make install
Manifying blib/man3/File::Copy::Recursive.3
Installing /home/mhorsfall/5.18.2/lib/perl5/site_perl/5.18.1/File/Copy/Recursive.pm
Installing /home/mhorsfall/5.18.2/man/man3/File::Copy::Recursive.3
Appending installation info to /home/mhorsfall/5.18.2/lib/perl5/5.18.1/i686-linux/perllocal.pod
DMUEY/File-Copy-Recursive-0.38.tar.gz
/usr/bin/make install -- OK
Running make for I/IN/INGY/Inline-C-0.75.tar.gz
Has already been unwrapped into directory /home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL
CPAN.pm: Building I/IN/INGY/Inline-C-0.75.tar.gz
cp share/inline-c.pgx blib/lib/auto/share/dist/Inline-C/inline-c.pgx
cp lib/Inline/C/Parser/Pegex/Grammar.pm blib/lib/Inline/C/Parser/Pegex/Grammar.pm
cp lib/Inline/C/ParseRegExp.pod blib/lib/Inline/C/ParseRegExp.pod
cp lib/Inline/C/Parser/Pegex.pm blib/lib/Inline/C/Parser/Pegex.pm
cp lib/Inline/C/Parser/RegExp.pm blib/lib/Inline/C/Parser/RegExp.pm
cp lib/Inline/C.pod blib/lib/Inline/C.pod
cp lib/Inline/C/ParsePegex.pod blib/lib/Inline/C/ParsePegex.pod
cp lib/Inline/C/Cookbook.pod blib/lib/Inline/C/Cookbook.pod
cp lib/Inline/C.pm blib/lib/Inline/C.pm
cp lib/Inline/C/Parser.pm blib/lib/Inline/C/Parser.pm
cp lib/Inline/C/ParseRecDescent.pod blib/lib/Inline/C/ParseRecDescent.pod
cp lib/Inline/C/Parser/RecDescent.pm blib/lib/Inline/C/Parser/RecDescent.pm
cp lib/Inline/C/Parser/Pegex/AST.pm blib/lib/Inline/C/Parser/Pegex/AST.pm
Manifying blib/man3/Inline::C::Cookbook.3
Manifying blib/man3/Inline::C::ParseRegExp.3
Manifying blib/man3/Inline::C::ParsePegex.3
Manifying blib/man3/Inline::C::ParseRecDescent.3
Manifying blib/man3/Inline::C.3
INGY/Inline-C-0.75.tar.gz
/usr/bin/make -- OK
Running make test
Skip blib/lib/auto/share/dist/Inline-C/inline-c.pgx (unchanged)
PERL_DL_NONLAZY=1 /home/mhorsfall/5.18.2/bin/perl5.18.1 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/000-require-modules.t .. ok
t/01syntax.t ............. ok
t/02config.t ............. ok
t/03typemap.t ............ ok
t/04perlapi.t ............ ok
t/05xsmode.t ............. ok
t/06parseregexp.t ........ ok
t/07typemap_multi.t ...... ok
t/08taint.t .............. ok
This test could take a couple of minutes to run
t/09parser.t ............. ok
t/10callback.t ........... ok
t/11default_readonly.t ... ok
t/14void_arg.t ........... ok
t/14void_arg_PRD.t ....... ok
t/15ccflags.t ............ ok
t/16ccflagsex.t .......... ok
t/17prehead.t ............ ok
t/18quote_space.t ........ ok
t/19INC.t ................ ok
t/20eval.t ............... ok
t/21read_DATA.t .......... ok
t/22read_DATA_2.t ........ ok
t/23validate.t ........... ok
t/24prefix.t ............. ok
t/25proto.t .............. ok
t/26fork.t ............... ok
# Failed test 'make test'
# at t/27inline_maker.t line 60.
# make[1]: Entering directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir'
# cp lib/Boo.pm blib/lib/Boo.pm
# cp lib/Boo/Far.pm blib/lib/Boo/Far.pm
# cp lib/Boo/Far/data.txt blib/lib/Boo/Far/data.txt
# cp lib/Boo/Far/Faz.pm blib/lib/Boo/Far/Faz.pm
# /home/mhorsfall/5.18.2/bin/perl5.18.1 -Mblib -MInline=NOISY,_INSTALL_ -MBoo -e"my %A = (modinlname => 'Boo.inl', module => 'Boo'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 2.01 blib/arch
# /home/mhorsfall/5.18.2/bin/perl5.18.1 -Mblib -MInline=NOISY,_INSTALL_ -MBoo::Far::Faz -e"my %A = (modinlname => 'Boo-Far-Faz.inl', module => 'Boo::Far::Faz'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 2.01 blib/arch
# validate Stage
# Starting Build Preprocess Stage
# get_maps Stage
# Finished Build Preprocess Stage
#
# Starting Build Parse Stage
# Finished Build Parse Stage
#
# Starting Build Glue 1 Stage
# Finished Build Glue 1 Stage
#
# Starting Build Glue 2 Stage
# Finished Build Glue 2 Stage
#
# Starting Build Glue 3 Stage
# Finished Build Glue 3 Stage
#
# Starting Build Compile Stage
# Starting "perl Makefile.PL" Stage
# Writing Makefile for Boo::Far::Faz
# Writing MYMETA.yml and MYMETA.json
# Finished "perl Makefile.PL" Stage
#
# Starting "make" Stage
# make[2]: Entering directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/_Inline/build/Boo/Far/Faz'
# /home/mhorsfall/5.18.2/bin/perl5.18.1 /home/mhorsfall/5.18.2/lib/perl5/5.18.1/ExtUtils/xsubpp -typemap "/home/mhorsfall/5.18.2/lib/perl5/5.18.1/ExtUtils/typemap" Faz.xs > Faz.xsc && mv Faz.xsc Faz.c
# cc -c -I"/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir" -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"2.01\" -DXS_VERSION=\"2.01\" -fPIC "-I/home/mhorsfall/5.18.2/lib/perl5/5.18.1/i686-linux/CORE" Faz.c
# Running Mkbootstrap for Boo::Far::Faz ()
# chmod 644 Faz.bs
# rm -f blib/arch/auto/Boo/Far/Faz/Faz.so
# cc -shared -O2 -L/usr/local/lib -fstack-protector Faz.o -o blib/arch/auto/Boo/Far/Faz/Faz.so \
# \
#
# chmod 755 blib/arch/auto/Boo/Far/Faz/Faz.so
# cp Faz.bs blib/arch/auto/Boo/Far/Faz/Faz.bs
# chmod 644 blib/arch/auto/Boo/Far/Faz/Faz.bs
# make[2]: Leaving directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/_Inline/build/Boo/Far/Faz'
# Finished "make" Stage
#
# Starting "make install" Stage
# make[2]: Entering directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/_Inline/build/Boo/Far/Faz'
# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# ERROR: Can't create '/'
# Do not have write permissions on '/'
# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# at -e line 1.
# make[2]: *** [pure_site_install] Error 13
# make[2]: Leaving directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/_Inline/build/Boo/Far/Faz'
#
# A problem was encountered while attempting to compile and install your Inline
# C code. The command that failed was:
# "make pure_install" with error code 2
#
# The build directory was:
# /home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/_Inline/build/Boo/Far/Faz
#
# To debug the problem, cd to the build directory, and inspect the output files.
#
# at /home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/blib/lib/Boo/Far/Faz.pm line 8.
# ...propagated at /home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/blib/lib/Inline/C.pm line 864.
# BEGIN failed--compilation aborted at /home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/blib/lib/Boo/Far/Faz.pm line 8.
# Compilation failed in require.
# BEGIN failed--compilation aborted.
# make[1]: *** [Boo-Far-Faz.inl] Error 25
# make[1]: Leaving directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir'
# Failed test 'make install'
# at t/27inline_maker.t line 60.
# make[1]: Entering directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir'
# /home/mhorsfall/5.18.2/bin/perl5.18.1 -Mblib -MInline=NOISY,_INSTALL_ -MBoo::Far::Faz -e"my %A = (modinlname => 'Boo-Far-Faz.inl', module => 'Boo::Far::Faz'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 2.01 blib/arch
# validate Stage
# Starting Build Preprocess Stage
# get_maps Stage
# Finished Build Preprocess Stage
#
# Starting Build Parse Stage
# Finished Build Parse Stage
#
# Starting Build Glue 1 Stage
# Finished Build Glue 1 Stage
#
# Starting Build Glue 2 Stage
# Finished Build Glue 2 Stage
#
# Starting Build Glue 3 Stage
# Finished Build Glue 3 Stage
#
# Starting Build Compile Stage
# Starting "perl Makefile.PL" Stage
# Writing Makefile for Boo::Far::Faz
# Writing MYMETA.yml and MYMETA.json
# Finished "perl Makefile.PL" Stage
#
# Starting "make" Stage
# make[2]: Entering directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/_Inline/build/Boo/Far/Faz'
# /home/mhorsfall/5.18.2/bin/perl5.18.1 /home/mhorsfall/5.18.2/lib/perl5/5.18.1/ExtUtils/xsubpp -typemap "/home/mhorsfall/5.18.2/lib/perl5/5.18.1/ExtUtils/typemap" Faz.xs > Faz.xsc && mv Faz.xsc Faz.c
# cc -c -I"/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir" -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"2.01\" -DXS_VERSION=\"2.01\" -fPIC "-I/home/mhorsfall/5.18.2/lib/perl5/5.18.1/i686-linux/CORE" Faz.c
# Running Mkbootstrap for Boo::Far::Faz ()
# chmod 644 Faz.bs
# rm -f blib/arch/auto/Boo/Far/Faz/Faz.so
# cc -shared -O2 -L/usr/local/lib -fstack-protector Faz.o -o blib/arch/auto/Boo/Far/Faz/Faz.so \
# \
#
# chmod 755 blib/arch/auto/Boo/Far/Faz/Faz.so
# cp Faz.bs blib/arch/auto/Boo/Far/Faz/Faz.bs
# chmod 644 blib/arch/auto/Boo/Far/Faz/Faz.bs
# make[2]: Leaving directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/_Inline/build/Boo/Far/Faz'
# Finished "make" Stage
#
# Starting "make install" Stage
# make[2]: Entering directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/_Inline/build/Boo/Far/Faz'
# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# ERROR: Can't create '/'
# Do not have write permissions on '/'
# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# at -e line 1.
# make[2]: Leaving directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/_Inline/build/Boo/Far/Faz'
# make[2]: *** [pure_site_install] Error 13
#
# A problem was encountered while attempting to compile and install your Inline
# C code. The command that failed was:
# "make pure_install" with error code 2
#
# The build directory was:
# /home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/_Inline/build/Boo/Far/Faz
#
# To debug the problem, cd to the build directory, and inspect the output files.
#
# at /home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/blib/lib/Boo/Far/Faz.pm line 8.
# ...propagated at /home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/blib/lib/Inline/C.pm line 864.
# BEGIN failed--compilation aborted at /home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/blib/lib/Boo/Far/Faz.pm line 8.
# Compilation failed in require.
# BEGIN failed--compilation aborted.
# make[1]: *** [Boo-Far-Faz.inl] Error 25
# make[1]: Leaving directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir'
# Failed test 'make test'
# at t/27inline_maker.t line 60.
# make[1]: Entering directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir'
# cp Simple.pm blib/lib/Math/Simple.pm
# /home/mhorsfall/5.18.2/bin/perl5.18.1 -Mblib -MInline=NOISY,_INSTALL_ -MMath::Simple -e"my %A = (modinlname => 'Math-Simple.inl', module => 'Math::Simple'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 1.23 blib/arch
# validate Stage
# Starting Build Preprocess Stage
# get_maps Stage
# Finished Build Preprocess Stage
#
# Starting Build Parse Stage
# Finished Build Parse Stage
#
# Starting Build Glue 1 Stage
# Finished Build Glue 1 Stage
#
# Starting Build Glue 2 Stage
# Finished Build Glue 2 Stage
#
# Starting Build Glue 3 Stage
# Finished Build Glue 3 Stage
#
# Starting Build Compile Stage
# Starting "perl Makefile.PL" Stage
# Writing Makefile for Math::Simple
# Writing MYMETA.yml and MYMETA.json
# Finished "perl Makefile.PL" Stage
#
# Starting "make" Stage
# make[2]: Entering directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/_Inline/build/Math/Simple'
# /home/mhorsfall/5.18.2/bin/perl5.18.1 /home/mhorsfall/5.18.2/lib/perl5/5.18.1/ExtUtils/xsubpp -typemap "/home/mhorsfall/5.18.2/lib/perl5/5.18.1/ExtUtils/typemap" Simple.xs > Simple.xsc && mv Simple.xsc Simple.c
# cc -c -I"/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir" -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"1.23\" -DXS_VERSION=\"1.23\" -fPIC "-I/home/mhorsfall/5.18.2/lib/perl5/5.18.1/i686-linux/CORE" Simple.c
# Running Mkbootstrap for Math::Simple ()
# chmod 644 Simple.bs
# rm -f blib/arch/auto/Math/Simple/Simple.so
# cc -shared -O2 -L/usr/local/lib -fstack-protector Simple.o -o blib/arch/auto/Math/Simple/Simple.so \
# \
#
# chmod 755 blib/arch/auto/Math/Simple/Simple.so
# cp Simple.bs blib/arch/auto/Math/Simple/Simple.bs
# chmod 644 blib/arch/auto/Math/Simple/Simple.bs
# make[2]: Leaving directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/_Inline/build/Math/Simple'
# Finished "make" Stage
#
# Starting "make install" Stage
# make[2]: Entering directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/_Inline/build/Math/Simple'
# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# ERROR: Can't create '/'
# Do not have write permissions on '/'
# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# at -e line 1.
# make[2]: *** [pure_site_install] Error 13
# make[2]: Leaving directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/_Inline/build/Math/Simple'
#
# A problem was encountered while attempting to compile and install your Inline
# C code. The command that failed was:
# "make pure_install" with error code 2
#
# The build directory was:
# /home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/_Inline/build/Math/Simple
#
# To debug the problem, cd to the build directory, and inspect the output files.
#
# at -e line 0.
# ...propagated at /home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/blib/lib/Inline/C.pm line 864.
# INIT failed--call queue aborted.
# make[1]: *** [Math-Simple.inl] Error 25
# make[1]: Leaving directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir'
# Failed test 'make install'
# at t/27inline_maker.t line 60.
# make[1]: Entering directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir'
# /home/mhorsfall/5.18.2/bin/perl5.18.1 -Mblib -MInline=NOISY,_INSTALL_ -MMath::Simple -e"my %A = (modinlname => 'Math-Simple.inl', module => 'Math::Simple'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 1.23 blib/arch
# validate Stage
# Starting Build Preprocess Stage
# get_maps Stage
# Finished Build Preprocess Stage
#
# Starting Build Parse Stage
# Finished Build Parse Stage
#
# Starting Build Glue 1 Stage
# Finished Build Glue 1 Stage
#
# Starting Build Glue 2 Stage
# Finished Build Glue 2 Stage
#
# Starting Build Glue 3 Stage
# Finished Build Glue 3 Stage
#
# Starting Build Compile Stage
# Starting "perl Makefile.PL" Stage
# Writing Makefile for Math::Simple
# Writing MYMETA.yml and MYMETA.json
# Finished "perl Makefile.PL" Stage
#
# Starting "make" Stage
# make[2]: Entering directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/_Inline/build/Math/Simple'
# /home/mhorsfall/5.18.2/bin/perl5.18.1 /home/mhorsfall/5.18.2/lib/perl5/5.18.1/ExtUtils/xsubpp -typemap "/home/mhorsfall/5.18.2/lib/perl5/5.18.1/ExtUtils/typemap" Simple.xs > Simple.xsc && mv Simple.xsc Simple.c
# cc -c -I"/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir" -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"1.23\" -DXS_VERSION=\"1.23\" -fPIC "-I/home/mhorsfall/5.18.2/lib/perl5/5.18.1/i686-linux/CORE" Simple.c
# Running Mkbootstrap for Math::Simple ()
# chmod 644 Simple.bs
# rm -f blib/arch/auto/Math/Simple/Simple.so
# cc -shared -O2 -L/usr/local/lib -fstack-protector Simple.o -o blib/arch/auto/Math/Simple/Simple.so \
# \
#
# chmod 755 blib/arch/auto/Math/Simple/Simple.so
# cp Simple.bs blib/arch/auto/Math/Simple/Simple.bs
# chmod 644 blib/arch/auto/Math/Simple/Simple.bs
# make[2]: Leaving directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/_Inline/build/Math/Simple'
# Finished "make" Stage
#
# Starting "make install" Stage
# make[2]: Entering directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/_Inline/build/Math/Simple'
# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# ERROR: Can't create '/'
# Do not have write permissions on '/'
# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# at -e line 1.
# make[2]: *** [pure_site_install] Error 13
# make[2]: Leaving directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/_Inline/build/Math/Simple'
#
# A problem was encountered while attempting to compile and install your Inline
# C code. The command that failed was:
# "make pure_install" with error code 2
#
# The build directory was:
# /home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir/_Inline/build/Math/Simple
#
# To debug the problem, cd to the build directory, and inspect the output files.
#
# at -e line 0.
# ...propagated at /home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/blib/lib/Inline/C.pm line 864.
# INIT failed--call queue aborted.
# make[1]: *** [Math-Simple.inl] Error 25
# make[1]: Leaving directory `/home/mhorsfall/.local/share/.cpan/build/Inline-C-0.75-waqHrL/_Inline_27inline_maker.12088/src dir'
# Looks like you failed 4 tests of 8.
t/27inline_maker.t .......
Dubious, test returned 4 (wstat 1024, 0x400)
Failed 4/8 subtests
t/28autowrap.t ........... ok
t/parse-pegex.t .......... ok
t/pegex-parser.t ......... skipped: $ENV{PERL_INLINE_DEVELOPER_TEST} not set
t/release-pod-syntax.t ... skipped: these tests are for release candidate testing
Test Summary Report
-------------------
t/27inline_maker.t (Wstat: 1024 Tests: 8 Failed: 4)
Failed tests: 2-3, 6-7
Non-zero exit status: 4
t/parse-pegex.t (Wstat: 0 Tests: 24 Failed: 0)
TODO passed: 4, 7-9
Files=31, Tests=153, 65 wallclock secs ( 0.12 usr 0.04 sys + 50.03 cusr 5.19 csys = 55.38 CPU)
Result: FAIL
Failed 1/31 test programs. 4/153 subtests failed.
make: *** [test_dynamic] Error 255
INGY/Inline-C-0.75.tar.gz
/usr/bin/make test -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
reports INGY/Inline-C-0.75.tar.gz
Running make install
make test had returned bad status, won't install without force
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment