Daniel Sachse wombat

## README.MD

      
        
          
            
              
              1 file
            
          
          
            
              
              1 fork
            
          
          
            
              
              11 comments
            
          
          
            
              
              10 stars
            
          
        
        
          
              
          
          
            
                wombat
                / README.MD
            
            
              Last active
              August 13, 2023 02:28
            
              
                Nighthawk M1 AT commands
              
          
        
      
        
  
      
    Connect Nighthawk M1 via USB to your computer. Open up a terminal and connect to the Nighthawk M1 via telnet (IP MAY VARY):
telnet 192.168.1.1 5510.
You can check the current status of the LTE via the AT!gstatus? command.
To add more options to your cellular list in the Nighthawk M1 settings, copy/paste the following commands and paste them in the telnet session (you might need to hit ENTER one or two times - just as long until no "OK" comes back):
AT!BAND=3,"1800 Only (B3)",0,4
AT!BAND=4,"2600 Only (B7)",0,40