Created
November 20, 2019 19:07
-
-
Save wongjustin99/99a14d48b051e5cfa80acaf3497eaed9 to your computer and use it in GitHub Desktop.
v2ray
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/bash | |
| red='\e[91m' | |
| green='\e[92m' | |
| yellow='\e[93m' | |
| magenta='\e[95m' | |
| cyan='\e[96m' | |
| none='\e[0m' | |
| _red() { echo -e ${red}$*${none}; } | |
| _green() { echo -e ${green}$*${none}; } | |
| _yellow() { echo -e ${yellow}$*${none}; } | |
| _magenta() { echo -e ${magenta}$*${none}; } | |
| _cyan() { echo -e ${cyan}$*${none}; } | |
| # Root | |
| [[ $(id -u) != 0 ]] && echo -e "\n 哎呀……请使用 ${red}root ${none}用户运行 ${yellow}~(^_^) ${none}\n" && exit 1 | |
| cmd="apt-get" | |
| sys_bit=$(uname -m) | |
| case $sys_bit in | |
| i[36]86) | |
| v2ray_bit="32" | |
| caddy_arch="386" | |
| ;; | |
| x86_64) | |
| v2ray_bit="64" | |
| caddy_arch="amd64" | |
| ;; | |
| *armv6*) | |
| v2ray_bit="arm" | |
| caddy_arch="arm6" | |
| ;; | |
| *armv7*) | |
| v2ray_bit="arm" | |
| caddy_arch="arm7" | |
| ;; | |
| *aarch64* | *armv8*) | |
| v2ray_bit="arm64" | |
| caddy_arch="arm64" | |
| ;; | |
| *) | |
| echo -e " | |
| 哈哈……这个 ${red}辣鸡脚本${none} 不支持你的系统。 ${yellow}(-_-) ${none} | |
| 备注: 仅支持 Ubuntu 16+ / Debian 8+ / CentOS 7+ 系统 | |
| " && exit 1 | |
| ;; | |
| esac | |
| # 笨笨的检测方法 | |
| if [[ $(command -v apt-get) || $(command -v yum) ]] && [[ $(command -v systemctl) ]]; then | |
| if [[ $(command -v yum) ]]; then | |
| cmd="yum" | |
| fi | |
| else | |
| echo -e " | |
| 哈哈……这个 ${red}辣鸡脚本${none} 不支持你的系统。 ${yellow}(-_-) ${none} | |
| 备注: 仅支持 Ubuntu 16+ / Debian 8+ / CentOS 7+ 系统 | |
| " && exit 1 | |
| fi | |
| uuid=$(cat /proc/sys/kernel/random/uuid) | |
| old_id="e55c8d17-2cf3-b21a-bcf1-eeacb011ed79" | |
| v2ray_server_config="/etc/v2ray/config.json" | |
| v2ray_client_config="/etc/v2ray/233blog_v2ray_config.json" | |
| backup="/etc/v2ray/233blog_v2ray_backup.conf" | |
| _v2ray_sh="/usr/local/sbin/v2ray" | |
| systemd=true | |
| # _test=true | |
| transport=( | |
| TCP | |
| TCP_HTTP | |
| WebSocket | |
| "WebSocket + TLS" | |
| HTTP/2 | |
| mKCP | |
| mKCP_utp | |
| mKCP_srtp | |
| mKCP_wechat-video | |
| mKCP_dtls | |
| mKCP_wireguard | |
| QUIC | |
| QUIC_utp | |
| QUIC_srtp | |
| QUIC_wechat-video | |
| QUIC_dtls | |
| QUIC_wireguard | |
| TCP_dynamicPort | |
| TCP_HTTP_dynamicPort | |
| WebSocket_dynamicPort | |
| mKCP_dynamicPort | |
| mKCP_utp_dynamicPort | |
| mKCP_srtp_dynamicPort | |
| mKCP_wechat-video_dynamicPort | |
| mKCP_dtls_dynamicPort | |
| mKCP_wireguard_dynamicPort | |
| QUIC_dynamicPort | |
| QUIC_utp_dynamicPort | |
| QUIC_srtp_dynamicPort | |
| QUIC_wechat-video_dynamicPort | |
| QUIC_dtls_dynamicPort | |
| QUIC_wireguard_dynamicPort | |
| ) | |
| ciphers=( | |
| aes-128-cfb | |
| aes-256-cfb | |
| chacha20 | |
| chacha20-ietf | |
| aes-128-gcm | |
| aes-256-gcm | |
| chacha20-ietf-poly1305 | |
| ) | |
| _load() { | |
| local _dir="/etc/v2ray/233boy/v2ray/src/" | |
| . "${_dir}$@" | |
| } | |
| _sys_timezone() { | |
| IS_OPENVZ= | |
| if hostnamectl status | grep -q openvz; then | |
| IS_OPENVZ=1 | |
| fi | |
| echo | |
| timedatectl set-timezone Asia/Shanghai | |
| timedatectl set-ntp true | |
| echo "已将你的主机设置为Asia/Shanghai时区并通过systemd-timesyncd自动同步时间。" | |
| echo | |
| if [[ $IS_OPENVZ ]]; then | |
| echo | |
| echo -e "你的主机环境为 ${yellow}Openvz${none} ，建议使用${yellow}v2ray mkcp${none}系列协议。" | |
| echo -e "注意：${yellow}Openvz${none} 系统时间无法由虚拟机内程序控制同步。" | |
| echo -e "如果主机时间跟实际相差${yellow}超过90秒${none}，v2ray将无法正常通信，请发ticket联系vps主机商调整。" | |
| fi | |
| } | |
| _sys_time() { | |
| echo -e "\n主机时间：${yellow}" | |
| timedatectl status | sed -n '1p;4p' | |
| echo -e "${none}" | |
| [[ $IS_OPENV ]] && pause | |
| } | |
| v2ray_config() { | |
| # clear | |
| echo | |
| while :; do | |
| echo -e "请选择 "$yellow"V2Ray"$none" 传输协议 [${magenta}1-${#transport[*]}$none]" | |
| echo | |
| for ((i = 1; i <= ${#transport[*]}; i++)); do | |
| Stream="${transport[$i - 1]}" | |
| if [[ "$i" -le 9 ]]; then | |
| # echo | |
| echo -e "$yellow $i. $none${Stream}" | |
| else | |
| # echo | |
| echo -e "$yellow $i. $none${Stream}" | |
| fi | |
| done | |
| echo | |
| echo "备注1: 含有 [dynamicPort] 的即启用动态端口.." | |
| echo "备注2: [utp | srtp | wechat-video | dtls | wireguard] 分别伪装成 [BT下载 | 视频通话 | 微信视频通话 | DTLS 1.2 数据包 | WireGuard 数据包]" | |
| echo | |
| read -p "$(echo -e "(默认协议: ${cyan}TCP$none)"):" v2ray_transport | |
| [ -z "$v2ray_transport" ] && v2ray_transport=1 | |
| case $v2ray_transport in | |
| [1-9] | [1-2][0-9] | 3[0-2]) | |
| echo | |
| echo | |
| echo -e "$yellow V2Ray 传输协议 = $cyan${transport[$v2ray_transport - 1]}$none" | |
| echo "----------------------------------------------------------------" | |
| echo | |
| break | |
| ;; | |
| *) | |
| error | |
| ;; | |
| esac | |
| done | |
| v2ray_port_config | |
| } | |
| v2ray_port_config() { | |
| case $v2ray_transport in | |
| 4 | 5) | |
| tls_config | |
| ;; | |
| *) | |
| local random=$(shuf -i20001-65535 -n1) | |
| while :; do | |
| echo -e "请输入 "$yellow"V2Ray"$none" 端口 ["$magenta"1-65535"$none"]" | |
| read -p "$(echo -e "(默认端口: ${cyan}${random}$none):")" v2ray_port | |
| [ -z "$v2ray_port" ] && v2ray_port=$random | |
| case $v2ray_port in | |
| [1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5]) | |
| echo | |
| echo | |
| echo -e "$yellow V2Ray 端口 = $cyan$v2ray_port$none" | |
| echo "----------------------------------------------------------------" | |
| echo | |
| break | |
| ;; | |
| *) | |
| error | |
| ;; | |
| esac | |
| done | |
| if [[ $v2ray_transport -ge 18 ]]; then | |
| v2ray_dynamic_port_start | |
| fi | |
| ;; | |
| esac | |
| } | |
| v2ray_dynamic_port_start() { | |
| while :; do | |
| echo -e "请输入 "$yellow"V2Ray 动态端口开始 "$none"范围 ["$magenta"1-65535"$none"]" | |
| read -p "$(echo -e "(默认开始端口: ${cyan}10000$none):")" v2ray_dynamic_port_start_input | |
| [ -z $v2ray_dynamic_port_start_input ] && v2ray_dynamic_port_start_input=10000 | |
| case $v2ray_dynamic_port_start_input in | |
| $v2ray_port) | |
| echo | |
| echo " 不能和 V2Ray 端口一毛一样...." | |
| echo | |
| echo -e " 当前 V2Ray 端口：${cyan}$v2ray_port${none}" | |
| error | |
| ;; | |
| [1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5]) | |
| echo | |
| echo | |
| echo -e "$yellow V2Ray 动态端口开始 = $cyan$v2ray_dynamic_port_start_input$none" | |
| echo "----------------------------------------------------------------" | |
| echo | |
| break | |
| ;; | |
| *) | |
| error | |
| ;; | |
| esac | |
| done | |
| if [[ $v2ray_dynamic_port_start_input -lt $v2ray_port ]]; then | |
| lt_v2ray_port=true | |
| fi | |
| v2ray_dynamic_port_end | |
| } | |
| v2ray_dynamic_port_end() { | |
| while :; do | |
| echo -e "请输入 "$yellow"V2Ray 动态端口结束 "$none"范围 ["$magenta"1-65535"$none"]" | |
| read -p "$(echo -e "(默认结束端口: ${cyan}20000$none):")" v2ray_dynamic_port_end_input | |
| [ -z $v2ray_dynamic_port_end_input ] && v2ray_dynamic_port_end_input=20000 | |
| case $v2ray_dynamic_port_end_input in | |
| [1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5]) | |
| if [[ $v2ray_dynamic_port_end_input -le $v2ray_dynamic_port_start_input ]]; then | |
| echo | |
| echo " 不能小于或等于 V2Ray 动态端口开始范围" | |
| echo | |
| echo -e " 当前 V2Ray 动态端口开始：${cyan}$v2ray_dynamic_port_start_input${none}" | |
| error | |
| elif [ $lt_v2ray_port ] && [[ ${v2ray_dynamic_port_end_input} -ge $v2ray_port ]]; then | |
| echo | |
| echo " V2Ray 动态端口结束范围 不能包括 V2Ray 端口..." | |
| echo | |
| echo -e " 当前 V2Ray 端口：${cyan}$v2ray_port${none}" | |
| error | |
| else | |
| echo | |
| echo | |
| echo -e "$yellow V2Ray 动态端口结束 = $cyan$v2ray_dynamic_port_end_input$none" | |
| echo "----------------------------------------------------------------" | |
| echo | |
| break | |
| fi | |
| ;; | |
| *) | |
| error | |
| ;; | |
| esac | |
| done | |
| } | |
| tls_config() { | |
| echo | |
| local random=$(shuf -i20001-65535 -n1) | |
| while :; do | |
| echo -e "请输入 "$yellow"V2Ray"$none" 端口 ["$magenta"1-65535"$none"]，不能选择 "$magenta"80"$none" 或 "$magenta"443"$none" 端口" | |
| read -p "$(echo -e "(默认端口: ${cyan}${random}$none):")" v2ray_port | |
| [ -z "$v2ray_port" ] && v2ray_port=$random | |
| case $v2ray_port in | |
| 80) | |
| echo | |
| echo " ...都说了不能选择 80 端口了咯....." | |
| error | |
| ;; | |
| 443) | |
| echo | |
| echo " ..都说了不能选择 443 端口了咯....." | |
| error | |
| ;; | |
| [1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5]) | |
| echo | |
| echo | |
| echo -e "$yellow V2Ray 端口 = $cyan$v2ray_port$none" | |
| echo "----------------------------------------------------------------" | |
| echo | |
| break | |
| ;; | |
| *) | |
| error | |
| ;; | |
| esac | |
| done | |
| while :; do | |
| echo | |
| echo -e "请输入一个 $magenta正确的域名$none，一定一定一定要正确，不！能！出！错！" | |
| read -p "(例如：233blog.com): " domain | |
| [ -z "$domain" ] && error && continue | |
| echo | |
| echo | |
| echo -e "$yellow 你的域名 = $cyan$domain$none" | |
| echo "----------------------------------------------------------------" | |
| break | |
| done | |
| get_ip | |
| echo | |
| echo | |
| echo -e "$yellow 请将 $magenta$domain$none $yellow解析到: $cyan$ip$none" | |
| echo | |
| echo -e "$yellow 请将 $magenta$domain$none $yellow解析到: $cyan$ip$none" | |
| echo | |
| echo -e "$yellow 请将 $magenta$domain$none $yellow解析到: $cyan$ip$none" | |
| echo "----------------------------------------------------------------" | |
| echo | |
| while :; do | |
| read -p "$(echo -e "(是否已经正确解析: [${magenta}Y$none]):") " record | |
| if [[ -z "$record" ]]; then | |
| error | |
| else | |
| if [[ "$record" == [Yy] ]]; then | |
| domain_check | |
| echo | |
| echo | |
| echo -e "$yellow 域名解析 = ${cyan}我确定已经有解析了$none" | |
| echo "----------------------------------------------------------------" | |
| echo | |
| break | |
| else | |
| error | |
| fi | |
| fi | |
| done | |
| if [[ $v2ray_transport -ne 5 ]]; then | |
| auto_tls_config | |
| else | |
| caddy=true | |
| install_caddy_info="打开" | |
| fi | |
| if [[ $caddy ]]; then | |
| path_config_ask | |
| fi | |
| } | |
| auto_tls_config() { | |
| echo -e " | |
| 安装 Caddy 来实现 自动配置 TLS | |
| 如果你已经安装 Nginx 或 Caddy | |
| $yellow并且..自己能搞定配置 TLS$none | |
| 那么就不需要 打开自动配置 TLS | |
| " | |
| echo "----------------------------------------------------------------" | |
| echo | |
| while :; do | |
| read -p "$(echo -e "(是否自动配置 TLS: [${magenta}Y/N$none]):") " auto_install_caddy | |
| if [[ -z "$auto_install_caddy" ]]; then | |
| error | |
| else | |
| if [[ "$auto_install_caddy" == [Yy] ]]; then | |
| caddy=true | |
| install_caddy_info="打开" | |
| echo | |
| echo | |
| echo -e "$yellow 自动配置 TLS = $cyan$install_caddy_info$none" | |
| echo "----------------------------------------------------------------" | |
| echo | |
| break | |
| elif [[ "$auto_install_caddy" == [Nn] ]]; then | |
| install_caddy_info="关闭" | |
| echo | |
| echo | |
| echo -e "$yellow 自动配置 TLS = $cyan$install_caddy_info$none" | |
| echo "----------------------------------------------------------------" | |
| echo | |
| break | |
| else | |
| error | |
| fi | |
| fi | |
| done | |
| } | |
| path_config_ask() { | |
| echo | |
| while :; do | |
| echo -e "是否开启 网站伪装 和 路径分流 [${magenta}Y/N$none]" | |
| read -p "$(echo -e "(默认: [${cyan}N$none]):")" path_ask | |
| [[ -z $path_ask ]] && path_ask="n" | |
| case $path_ask in | |
| Y | y) | |
| path_config | |
| break | |
| ;; | |
| N | n) | |
| echo | |
| echo | |
| echo -e "$yellow 网站伪装 和 路径分流 = $cyan不想配置$none" | |
| echo "----------------------------------------------------------------" | |
| echo | |
| break | |
| ;; | |
| *) | |
| error | |
| ;; | |
| esac | |
| done | |
| } | |
| path_config() { | |
| echo | |
| while :; do | |
| echo -e "请输入想要 ${magenta}用来分流的路径$none , 例如 /233blog , 那么只需要输入 233blog 即可" | |
| read -p "$(echo -e "(默认: [${cyan}233blog$none]):")" path | |
| [[ -z $path ]] && path="233blog" | |
| case $path in | |
| *[/$]*) | |
| echo | |
| echo -e " 由于这个脚本太辣鸡了..所以分流的路径不能包含$red / $none或$red $ $none这两个符号.... " | |
| echo | |
| error | |
| ;; | |
| *) | |
| echo | |
| echo | |
| echo -e "$yellow 分流的路径 = ${cyan}/${path}$none" | |
| echo "----------------------------------------------------------------" | |
| echo | |
| break | |
| ;; | |
| esac | |
| done | |
| is_path=true | |
| proxy_site_config | |
| } | |
| proxy_site_config() { | |
| echo | |
| while :; do | |
| echo -e "请输入 ${magenta}一个正确的$none ${cyan}网址$none 用来作为 ${cyan}网站的伪装$none , 例如 https://liyafly.com" | |
| echo -e "举例...你当前的域名是 $green$domain$none , 伪装的网址的是 https://liyafly.com" | |
| echo -e "然后打开你的域名时候...显示出来的内容就是来自 https://liyafly.com 的内容" | |
| echo -e "其实就是一个反代...明白就好..." | |
| echo -e "如果不能伪装成功...可以使用 v2ray config 修改伪装的网址" | |
| read -p "$(echo -e "(默认: [${cyan}https://liyafly.com$none]):")" proxy_site | |
| [[ -z $proxy_site ]] && proxy_site="https://liyafly.com" | |
| case $proxy_site in | |
| *[#$]*) | |
| echo | |
| echo -e " 由于这个脚本太辣鸡了..所以伪装的网址不能包含$red # $none或$red $ $none这两个符号.... " | |
| echo | |
| error | |
| ;; | |
| *) | |
| echo | |
| echo | |
| echo -e "$yellow 伪装的网址 = ${cyan}${proxy_site}$none" | |
| echo "----------------------------------------------------------------" | |
| echo | |
| break | |
| ;; | |
| esac | |
| done | |
| } | |
| blocked_hosts() { | |
| echo | |
| while :; do | |
| echo -e "是否开启广告拦截(会影响性能) [${magenta}Y/N$none]" | |
| read -p "$(echo -e "(默认 [${cyan}N$none]):")" blocked_ad | |
| [[ -z $blocked_ad ]] && blocked_ad="n" | |
| case $blocked_ad in | |
| Y | y) | |
| blocked_ad_info="开启" | |
| ban_ad=true | |
| echo | |
| echo | |
| echo -e "$yellow 广告拦截 = $cyan开启$none" | |
| echo "----------------------------------------------------------------" | |
| echo | |
| break | |
| ;; | |
| N | n) | |
| blocked_ad_info="关闭" | |
| echo | |
| echo | |
| echo -e "$yellow 广告拦截 = $cyan关闭$none" | |
| echo "----------------------------------------------------------------" | |
| echo | |
| break | |
| ;; | |
| *) | |
| error | |
| ;; | |
| esac | |
| done | |
| } | |
| shadowsocks_config() { | |
| echo | |
| while :; do | |
| echo -e "是否配置 ${yellow}Shadowsocks${none} [${magenta}Y/N$none]" | |
| read -p "$(echo -e "(默认 [${cyan}N$none]):") " install_shadowsocks | |
| [[ -z "$install_shadowsocks" ]] && install_shadowsocks="n" | |
| if [[ "$install_shadowsocks" == [Yy] ]]; then | |
| echo | |
| shadowsocks=true | |
| shadowsocks_port_config | |
| break | |
| elif [[ "$install_shadowsocks" == [Nn] ]]; then | |
| break | |
| else | |
| error | |
| fi | |
| done | |
| } | |
| shadowsocks_port_config() { | |
| local random=$(shuf -i20001-65535 -n1) | |
| while :; do | |
| echo -e "请输入 "$yellow"Shadowsocks"$none" 端口 ["$magenta"1-65535"$none"]，不能和 "$yellow"V2Ray"$none" 端口相同" | |
| read -p "$(echo -e "(默认端口: ${cyan}${random}$none):") " ssport | |
| [ -z "$ssport" ] && ssport=$random | |
| case $ssport in | |
| $v2ray_port) | |
| echo | |
| echo " 不能和 V2Ray 端口一毛一样...." | |
| error | |
| ;; | |
| [1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5]) | |
| if [[ $v2ray_transport == [45] ]]; then | |
| local tls=ture | |
| fi | |
| if [[ $tls && $ssport == "80" ]] || [[ $tls && $ssport == "443" ]]; then | |
| echo | |
| echo -e "由于你已选择了 "$green"WebSocket + TLS $none或$green HTTP/2"$none" 传输协议." | |
| echo | |
| echo -e "所以不能选择 "$magenta"80"$none" 或 "$magenta"443"$none" 端口" | |
| error | |
| elif [[ $v2ray_dynamic_port_start_input == $ssport || $v2ray_dynamic_port_end_input == $ssport ]]; then | |
| local multi_port="${v2ray_dynamic_port_start_input} - ${v2ray_dynamic_port_end_input}" | |
| echo | |
| echo " 抱歉，此端口和 V2Ray 动态端口 冲突，当前 V2Ray 动态端口范围为：$multi_port" | |
| error | |
| elif [[ $v2ray_dynamic_port_start_input -lt $ssport && $ssport -le $v2ray_dynamic_port_end_input ]]; then | |
| local multi_port="${v2ray_dynamic_port_start_input} - ${v2ray_dynamic_port_end_input}" | |
| echo | |
| echo " 抱歉，此端口和 V2Ray 动态端口 冲突，当前 V2Ray 动态端口范围为：$multi_port" | |
| error | |
| else | |
| echo | |
| echo | |
| echo -e "$yellow Shadowsocks 端口 = $cyan$ssport$none" | |
| echo "----------------------------------------------------------------" | |
| echo | |
| break | |
| fi | |
| ;; | |
| *) | |
| error | |
| ;; | |
| esac | |
| done | |
| shadowsocks_password_config | |
| } | |
| shadowsocks_password_config() { | |
| while :; do | |
| echo -e "请输入 "$yellow"Shadowsocks"$none" 密码" | |
| read -p "$(echo -e "(默认密码: ${cyan}233blog.com$none)"): " sspass | |
| [ -z "$sspass" ] && sspass="233blog.com" | |
| case $sspass in | |
| *[/$]*) | |
| echo | |
| echo -e " 由于这个脚本太辣鸡了..所以密码不能包含$red / $none或$red $ $none这两个符号.... " | |
| echo | |
| error | |
| ;; | |
| *) | |
| echo | |
| echo | |
| echo -e "$yellow Shadowsocks 密码 = $cyan$sspass$none" | |
| echo "----------------------------------------------------------------" | |
| echo | |
| break | |
| ;; | |
| esac | |
| done | |
| shadowsocks_ciphers_config | |
| } | |
| shadowsocks_ciphers_config() { | |
| while :; do | |
| echo -e "请选择 "$yellow"Shadowsocks"$none" 加密协议 [${magenta}1-${#ciphers[*]}$none]" | |
| for ((i = 1; i <= ${#ciphers[*]}; i++)); do | |
| ciphers_show="${ciphers[$i - 1]}" | |
| echo | |
| echo -e "$yellow $i. $none${ciphers_show}" | |
| done | |
| echo | |
| read -p "$(echo -e "(默认加密协议: ${cyan}${ciphers[6]}$none)"):" ssciphers_opt | |
| [ -z "$ssciphers_opt" ] && ssciphers_opt=7 | |
| case $ssciphers_opt in | |
| [1-7]) | |
| ssciphers=${ciphers[$ssciphers_opt - 1]} | |
| echo | |
| echo | |
| echo -e "$yellow Shadowsocks 加密协议 = $cyan${ssciphers}$none" | |
| echo "----------------------------------------------------------------" | |
| echo | |
| break | |
| ;; | |
| *) | |
| error | |
| ;; | |
| esac | |
| done | |
| pause | |
| } | |
| install_info() { | |
| clear | |
| echo | |
| echo " ....准备安装了咯..看看有毛有配置正确了..." | |
| echo | |
| echo "---------- 安装信息 -------------" | |
| echo | |
| echo -e "$yellow V2Ray 传输协议 = $cyan${transport[$v2ray_transport - 1]}$none" | |
| if [[ $v2ray_transport == [45] ]]; then | |
| echo | |
| echo -e "$yellow V2Ray 端口 = $cyan$v2ray_port$none" | |
| echo | |
| echo -e "$yellow 你的域名 = $cyan$domain$none" | |
| echo | |
| echo -e "$yellow 域名解析 = ${cyan}我确定已经有解析了$none" | |
| echo | |
| echo -e "$yellow 自动配置 TLS = $cyan$install_caddy_info$none" | |
| if [[ $ban_ad ]]; then | |
| echo | |
| echo -e "$yellow 广告拦截 = $cyan$blocked_ad_info$none" | |
| fi | |
| if [[ $is_path ]]; then | |
| echo | |
| echo -e "$yellow 路径分流 = ${cyan}/${path}$none" | |
| fi | |
| elif [[ $v2ray_transport -ge 18 ]]; then | |
| echo | |
| echo -e "$yellow V2Ray 端口 = $cyan$v2ray_port$none" | |
| echo | |
| echo -e "$yellow V2Ray 动态端口范围 = $cyan${v2ray_dynamic_port_start_input} - ${v2ray_dynamic_port_end_input}$none" | |
| if [[ $ban_ad ]]; then | |
| echo | |
| echo -e "$yellow 广告拦截 = $cyan$blocked_ad_info$none" | |
| fi | |
| else | |
| echo | |
| echo -e "$yellow V2Ray 端口 = $cyan$v2ray_port$none" | |
| if [[ $ban_ad ]]; then | |
| echo | |
| echo -e "$yellow 广告拦截 = $cyan$blocked_ad_info$none" | |
| fi | |
| fi | |
| if [ $shadowsocks ]; then | |
| echo | |
| echo -e "$yellow Shadowsocks 端口 = $cyan$ssport$none" | |
| echo | |
| echo -e "$yellow Shadowsocks 密码 = $cyan$sspass$none" | |
| echo | |
| echo -e "$yellow Shadowsocks 加密协议 = $cyan${ssciphers}$none" | |
| else | |
| echo | |
| echo -e "$yellow 是否配置 Shadowsocks = ${cyan}未配置${none}" | |
| fi | |
| echo | |
| echo "---------- END -------------" | |
| echo | |
| pause | |
| echo | |
| } | |
| domain_check() { | |
| # if [[ $cmd == "yum" ]]; then | |
| # yum install bind-utils -y | |
| # else | |
| # $cmd install dnsutils -y | |
| # fi | |
| # test_domain=$(dig $domain +short) | |
| test_domain=$(ping $domain -c 1 | grep -oE -m1 "([0-9]{1,3}\.){3}[0-9]{1,3}") | |
| if [[ $test_domain != $ip ]]; then | |
| echo | |
| echo -e "$red 检测域名解析错误....$none" | |
| echo | |
| echo -e " 你的域名: $yellow$domain$none 未解析到: $cyan$ip$none" | |
| echo | |
| echo -e " 你的域名当前解析到: $cyan$test_domain$none" | |
| echo | |
| echo "备注...如果你的域名是使用 Cloudflare 解析的话..在 Status 那里点一下那图标..让它变灰" | |
| echo | |
| exit 1 | |
| fi | |
| } | |
| install_caddy() { | |
| # download caddy file then install | |
| _load download-caddy.sh | |
| _download_caddy_file | |
| _install_caddy_service | |
| caddy_config | |
| } | |
| caddy_config() { | |
| # local email=$(shuf -i1-10000000000 -n1) | |
| _load caddy-config.sh | |
| # systemctl restart caddy | |
| do_service restart caddy | |
| } | |
| install_v2ray() { | |
| $cmd update -y | |
| if [[ $cmd == "apt-get" ]]; then | |
| $cmd install -y lrzsz git zip unzip curl wget qrencode libcap2-bin dbus | |
| else | |
| # $cmd install -y lrzsz git zip unzip curl wget qrencode libcap iptables-services | |
| $cmd install -y lrzsz git zip unzip curl wget qrencode libcap | |
| fi | |
| ln -sf /usr/share/zoneinfo/Asia/Shanghai /etc/localtime | |
| [ -d /etc/v2ray ] && rm -rf /etc/v2ray | |
| # date -s "$(curl -sI g.cn | grep Date | cut -d' ' -f3-6)Z" | |
| _sys_timezone | |
| _sys_time | |
| if [[ $local_install ]]; then | |
| if [[ ! -d $(pwd)/config ]]; then | |
| echo | |
| echo -e "$red 哎呀呀...安装失败了咯...$none" | |
| echo | |
| echo -e " 请确保你有完整的上传 233v2.com 的 V2Ray 一键安装脚本 & 管理脚本到当前 ${green}$(pwd) $none目录下" | |
| echo | |
| exit 1 | |
| fi | |
| mkdir -p /etc/v2ray/233boy/v2ray | |
| cp -rf $(pwd)/* /etc/v2ray/233boy/v2ray | |
| else | |
| pushd /tmp | |
| git clone https://github.com/233boy/v2ray -b "$_gitbranch" /etc/v2ray/233boy/v2ray --depth=1 | |
| popd | |
| fi | |
| if [[ ! -d /etc/v2ray/233boy/v2ray ]]; then | |
| echo | |
| echo -e "$red 哎呀呀...克隆脚本仓库出错了...$none" | |
| echo | |
| echo -e " 温馨提示..... 请尝试自行安装 Git: ${green}$cmd install -y git $none 之后再安装此脚本" | |
| echo | |
| exit 1 | |
| fi | |
| # download v2ray file then install | |
| _load download-v2ray.sh | |
| _download_v2ray_file | |
| _install_v2ray_service | |
| _mkdir_dir | |
| } | |
| open_port() { | |
| if [[ $cmd == "apt-get" ]]; then | |
| if [[ $1 != "multiport" ]]; then | |
| iptables -I INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT | |
| iptables -I INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT | |
| ip6tables -I INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT | |
| ip6tables -I INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT | |
| # firewall-cmd --permanent --zone=public --add-port=$1/tcp | |
| # firewall-cmd --permanent --zone=public --add-port=$1/udp | |
| # firewall-cmd --reload | |
| else | |
| local multiport="${v2ray_dynamic_port_start_input}:${v2ray_dynamic_port_end_input}" | |
| iptables -I INPUT -p tcp --match multiport --dports $multiport -j ACCEPT | |
| iptables -I INPUT -p udp --match multiport --dports $multiport -j ACCEPT | |
| ip6tables -I INPUT -p tcp --match multiport --dports $multiport -j ACCEPT | |
| ip6tables -I INPUT -p udp --match multiport --dports $multiport -j ACCEPT | |
| # local multi_port="${v2ray_dynamic_port_start_input}-${v2ray_dynamic_port_end_input}" | |
| # firewall-cmd --permanent --zone=public --add-port=$multi_port/tcp | |
| # firewall-cmd --permanent --zone=public --add-port=$multi_port/udp | |
| # firewall-cmd --reload | |
| fi | |
| iptables-save >/etc/iptables.rules.v4 | |
| ip6tables-save >/etc/iptables.rules.v6 | |
| # else | |
| # service iptables save >/dev/null 2>&1 | |
| # service ip6tables save >/dev/null 2>&1 | |
| fi | |
| } | |
| del_port() { | |
| if [[ $cmd == "apt-get" ]]; then | |
| if [[ $1 != "multiport" ]]; then | |
| # if [[ $cmd == "apt-get" ]]; then | |
| iptables -D INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT | |
| iptables -D INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT | |
| ip6tables -D INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT | |
| ip6tables -D INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT | |
| # else | |
| # firewall-cmd --permanent --zone=public --remove-port=$1/tcp | |
| # firewall-cmd --permanent --zone=public --remove-port=$1/udp | |
| # fi | |
| else | |
| # if [[ $cmd == "apt-get" ]]; then | |
| local ports="${v2ray_dynamicPort_start}:${v2ray_dynamicPort_end}" | |
| iptables -D INPUT -p tcp --match multiport --dports $ports -j ACCEPT | |
| iptables -D INPUT -p udp --match multiport --dports $ports -j ACCEPT | |
| ip6tables -D INPUT -p tcp --match multiport --dports $ports -j ACCEPT | |
| ip6tables -D INPUT -p udp --match multiport --dports $ports -j ACCEPT | |
| # else | |
| # local ports="${v2ray_dynamicPort_start}-${v2ray_dynamicPort_end}" | |
| # firewall-cmd --permanent --zone=public --remove-port=$ports/tcp | |
| # firewall-cmd --permanent --zone=public --remove-port=$ports/udp | |
| # fi | |
| fi | |
| iptables-save >/etc/iptables.rules.v4 | |
| ip6tables-save >/etc/iptables.rules.v6 | |
| # else | |
| # service iptables save >/dev/null 2>&1 | |
| # service ip6tables save >/dev/null 2>&1 | |
| fi | |
| } | |
| config() { | |
| cp -f /etc/v2ray/233boy/v2ray/config/backup.conf $backup | |
| cp -f /etc/v2ray/233boy/v2ray/v2ray.sh $_v2ray_sh | |
| chmod +x $_v2ray_sh | |
| v2ray_id=$uuid | |
| alterId=233 | |
| ban_bt=true | |
| if [[ $v2ray_transport -ge 18 ]]; then | |
| v2ray_dynamicPort_start=${v2ray_dynamic_port_start_input} | |
| v2ray_dynamicPort_end=${v2ray_dynamic_port_end_input} | |
| fi | |
| _load config.sh | |
| if [[ $cmd == "apt-get" ]]; then | |
| cat >/etc/network/if-pre-up.d/iptables <<-EOF | |
| #!/bin/sh | |
| /sbin/iptables-restore < /etc/iptables.rules.v4 | |
| /sbin/ip6tables-restore < /etc/iptables.rules.v6 | |
| EOF | |
| chmod +x /etc/network/if-pre-up.d/iptables | |
| # else | |
| # [ $(pgrep "firewall") ] && systemctl stop firewalld | |
| # systemctl mask firewalld | |
| # systemctl disable firewalld | |
| # systemctl enable iptables | |
| # systemctl enable ip6tables | |
| # systemctl start iptables | |
| # systemctl start ip6tables | |
| fi | |
| [[ $shadowsocks ]] && open_port $ssport | |
| if [[ $v2ray_transport == [45] ]]; then | |
| open_port "80" | |
| open_port "443" | |
| open_port $v2ray_port | |
| elif [[ $v2ray_transport -ge 18 ]]; then | |
| open_port $v2ray_port | |
| open_port "multiport" | |
| else | |
| open_port $v2ray_port | |
| fi | |
| # systemctl restart v2ray | |
| do_service restart v2ray | |
| backup_config | |
| } | |
| backup_config() { | |
| sed -i "18s/=1/=$v2ray_transport/; 21s/=2333/=$v2ray_port/; 24s/=$old_id/=$uuid/" $backup | |
| if [[ $v2ray_transport -ge 18 ]]; then | |
| sed -i "30s/=10000/=$v2ray_dynamic_port_start_input/; 33s/=20000/=$v2ray_dynamic_port_end_input/" $backup | |
| fi | |
| if [[ $shadowsocks ]]; then | |
| sed -i "42s/=/=true/; 45s/=6666/=$ssport/; 48s/=233blog.com/=$sspass/; 51s/=chacha20-ietf/=$ssciphers/" $backup | |
| fi | |
| [[ $v2ray_transport == [45] ]] && sed -i "36s/=233blog.com/=$domain/" $backup | |
| [[ $caddy ]] && sed -i "39s/=/=true/" $backup | |
| [[ $ban_ad ]] && sed -i "54s/=/=true/" $backup | |
| if [[ $is_path ]]; then | |
| sed -i "57s/=/=true/; 60s/=233blog/=$path/" $backup | |
| sed -i "63s#=https://liyafly.com#=$proxy_site#" $backup | |
| fi | |
| } | |
| get_ip() { | |
| ip=$(curl -s https://ipinfo.io/ip) | |
| [[ -z $ip ]] && ip=$(curl -s https://api.ip.sb/ip) | |
| [[ -z $ip ]] && ip=$(curl -s https://api.ipify.org) | |
| [[ -z $ip ]] && ip=$(curl -s https://ip.seeip.org) | |
| [[ -z $ip ]] && ip=$(curl -s https://ifconfig.co/ip) | |
| [[ -z $ip ]] && ip=$(curl -s https://api.myip.com | grep -oE "([0-9]{1,3}\.){3}[0-9]{1,3}") | |
| [[ -z $ip ]] && ip=$(curl -s icanhazip.com) | |
| [[ -z $ip ]] && ip=$(curl -s myip.ipip.net | grep -oE "([0-9]{1,3}\.){3}[0-9]{1,3}") | |
| [[ -z $ip ]] && echo -e "\n$red 这垃圾小鸡扔了吧！$none\n" && exit | |
| } | |
| error() { | |
| echo -e "\n$red 输入错误！$none\n" | |
| } | |
| pause() { | |
| read -rsp "$(echo -e "按$green Enter 回车键 $none继续....或按$red Ctrl + C $none取消.")" -d $'\n' | |
| echo | |
| } | |
| do_service() { | |
| if [[ $systemd ]]; then | |
| systemctl $1 $2 | |
| else | |
| service $2 $1 | |
| fi | |
| } | |
| show_config_info() { | |
| clear | |
| _load v2ray-info.sh | |
| _v2_args | |
| _v2_info | |
| _load ss-info.sh | |
| } | |
| install() { | |
| if [[ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ]] && [[ -f $backup && -d /etc/v2ray/233boy/v2ray ]]; then | |
| echo | |
| echo " 大佬...你已经安装 V2Ray 啦...无需重新安装" | |
| echo | |
| echo -e " $yellow输入 ${cyan}v2ray${none} $yellow即可管理 V2Ray${none}" | |
| echo | |
| exit 1 | |
| elif [[ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ]] && [[ -f /etc/v2ray/233blog_v2ray_backup.txt && -d /etc/v2ray/233boy/v2ray ]]; then | |
| echo | |
| echo " 如果你需要继续安装.. 请先卸载旧版本" | |
| echo | |
| echo -e " $yellow输入 ${cyan}v2ray uninstall${none} $yellow即可卸载${none}" | |
| echo | |
| exit 1 | |
| fi | |
| v2ray_config | |
| blocked_hosts | |
| shadowsocks_config | |
| install_info | |
| # [[ $caddy ]] && domain_check | |
| install_v2ray | |
| if [[ $caddy || $v2ray_port == "80" ]]; then | |
| if [[ $cmd == "yum" ]]; then | |
| [[ $(pgrep "httpd") ]] && systemctl stop httpd | |
| [[ $(command -v httpd) ]] && yum remove httpd -y | |
| else | |
| [[ $(pgrep "apache2") ]] && service apache2 stop | |
| [[ $(command -v apache2) ]] && apt-get remove apache2* -y | |
| fi | |
| fi | |
| [[ $caddy ]] && install_caddy | |
| ## bbr | |
| _load bbr.sh | |
| _try_enable_bbr | |
| get_ip | |
| config | |
| show_config_info | |
| } | |
| uninstall() { | |
| if [[ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ]] && [[ -f $backup && -d /etc/v2ray/233boy/v2ray ]]; then | |
| . $backup | |
| if [[ $mark ]]; then | |
| _load uninstall.sh | |
| else | |
| echo | |
| echo -e " $yellow输入 ${cyan}v2ray uninstall${none} $yellow即可卸载${none}" | |
| echo | |
| fi | |
| elif [[ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ]] && [[ -f /etc/v2ray/233blog_v2ray_backup.txt && -d /etc/v2ray/233boy/v2ray ]]; then | |
| echo | |
| echo -e " $yellow输入 ${cyan}v2ray uninstall${none} $yellow即可卸载${none}" | |
| echo | |
| else | |
| echo -e " | |
| $red 大胸弟...你貌似毛有安装 V2Ray ....卸载个鸡鸡哦...$none | |
| 备注...仅支持卸载使用我 (233v2.com) 提供的 V2Ray 一键安装脚本 | |
| " && exit 1 | |
| fi | |
| } | |
| args=$1 | |
| _gitbranch=$2 | |
| [ -z $1 ] && args="online" | |
| case $args in | |
| online) | |
| #hello world | |
| [[ -z $_gitbranch ]] && _gitbranch="master" | |
| ;; | |
| local) | |
| local_install=true | |
| ;; | |
| *) | |
| echo | |
| echo -e " 你输入的这个参数 <$red $args $none> ...这个是什么鬼啊...脚本不认识它哇" | |
| echo | |
| echo -e " 这个辣鸡脚本仅支持输入$green local / online $none参数" | |
| echo | |
| echo -e " 输入$yellow local $none即是使用本地安装" | |
| echo | |
| echo -e " 输入$yellow online $none即是使用在线安装 (默认)" | |
| echo | |
| exit 1 | |
| ;; | |
| esac | |
| clear | |
| while :; do | |
| echo | |
| echo "........... V2Ray 一键安装脚本 & 管理脚本 by 233v2.com .........." | |
| echo | |
| echo "帮助说明: https://233v2.com/post/1/" | |
| echo | |
| echo "搭建教程: https://233v2.com/post/2/" | |
| echo | |
| echo " 1. 安装" | |
| echo | |
| echo " 2. 卸载" | |
| echo | |
| if [[ $local_install ]]; then | |
| echo -e "$yellow 温馨提示.. 本地安装已启用 ..$none" | |
| echo | |
| fi | |
| read -p "$(echo -e "请选择 [${magenta}1-2$none]:")" choose | |
| case $choose in | |
| 1) | |
| install | |
| break | |
| ;; | |
| 2) | |
| uninstall | |
| break | |
| ;; | |
| *) | |
| error | |
| ;; | |
| esac | |
| done |
Nezambaloc
commented
Jun 8, 2024
- #free
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment