Qihoo C301 OP patch

010-c301-complete-support.patch

From 7f0f570213b7056a28d7d352ac1666e0937ffa4b Mon Sep 17 00:00:00 2001
From: Weijie Gao <hackpascal@gmail.com>
Date: Wed, 24 Sep 2014 01:13:34 +0800
Subject: [PATCH] complete c301 support

---
 package/boot/uboot-envtools/files/ar71xx           |  6 +++
 package/network/utils/iwinfo/src/iwinfo_lua.c      |  3 ++
 target/linux/ar71xx/base-files/etc/diag.sh         |  8 ++++
 .../lib/preinit/81_load_ath10k_board_bin           |  7 +++-
 .../ar71xx/files/arch/mips/ath79/mach-qihoo-c301.c | 49 +++++++++++++++++++---
 target/linux/ar71xx/image/Makefile                 |  9 +++-
 .../419-mtd-seama-add-c301-part-name-check.patch   | 14 +++++++
 .../419-mtd-seama-add-c301-part-name-check.patch   | 14 +++++++
 8 files changed, 101 insertions(+), 9 deletions(-)
 create mode 100644 target/linux/ar71xx/patches-3.10/419-mtd-seama-add-c301-part-name-check.patch
 create mode 100644 target/linux/ar71xx/patches-3.14/419-mtd-seama-add-c301-part-name-check.patch

diff --git a/package/boot/uboot-envtools/files/ar71xx b/package/boot/uboot-envtools/files/ar71xx
index 5deed9c..2383c45 100644
--- a/package/boot/uboot-envtools/files/ar71xx
+++ b/package/boot/uboot-envtools/files/ar71xx
@@ -41,6 +41,12 @@ om2p-lc)
 wzr-hp-ag300h)
 	ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x10000" "0x10000"
 	;;
+qihoo-c301)
+	if cat /proc/mtd | grep action_image_config; then
+		local mtd=$(cat /proc/mtd | grep action_image_config | sed 's/mtd\([0-9]*\):.*/\1/g')
+		ubootenv_add_uci_config "/dev/mtd${mtd}" "0x0" "0x10000" "0x10000"
+	fi
+	;;
 esac
 
 config_load ubootenv
diff --git a/package/network/utils/iwinfo/src/iwinfo_lua.c b/package/network/utils/iwinfo/src/iwinfo_lua.c
index cdb90d5..3201af4 100644
--- a/package/network/utils/iwinfo/src/iwinfo_lua.c
+++ b/package/network/utils/iwinfo/src/iwinfo_lua.c
@@ -499,6 +499,9 @@ static int iwinfo_L_hwmodelist(lua_State *L, int (*func)(const char *, int *))
 		lua_pushboolean(L, hwmodes & IWINFO_80211_N);
 		lua_setfield(L, -2, "n");
 
+		lua_pushboolean(L, hwmodes & IWINFO_80211_AC);
+		lua_setfield(L, -2, "ac");
+
 		return 1;
 	}
 
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index ac7e20d..2e4e263 100755
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -294,6 +294,14 @@ set_state() {
 		;;
 	done)
 		status_led_on
+		case $(ar71xx_board_name) in
+		qihoo-c301)
+			if cat /proc/mtd | grep action_image_config; then
+				local n=$(fw_printenv activeregion | cut -d = -f 2)
+				fw_setenv "image${n}trynum" 0
+			fi
+			;;
+		esac
 		;;
 	esac
 }
diff --git a/target/linux/ar71xx/base-files/lib/preinit/81_load_ath10k_board_bin b/target/linux/ar71xx/base-files/lib/preinit/81_load_ath10k_board_bin
index 2c06d7f..969de06 100644
--- a/target/linux/ar71xx/base-files/lib/preinit/81_load_ath10k_board_bin
+++ b/target/linux/ar71xx/base-files/lib/preinit/81_load_ath10k_board_bin
@@ -26,6 +26,9 @@ do_load_ath10k_board_bin() {
 		;;
 		qihoo-c301)
 			local mac
+			local mtd
+
+			mtd=$(cat /proc/mtd | grep radiocfg | sed 's/mtd\([0-9]*\):.*/\1/g')
 
 			mac=$(mtd_get_mac_ascii devdata wlan5mac)
 
@@ -33,11 +36,11 @@ do_load_ath10k_board_bin() {
 				mac=$(macaddr_add $(cat /sys/class/net/eth0/address) -2)
 			fi
 
-			dd if=/dev/mtdblock10 \
+			dd if=/dev/mtdblock${mtd} \
 				bs=1 skip=20480 count=6 \
 				of=/tmp/ath10k-board.bin
 			macaddr_2bin $mac >> /tmp/ath10k-board.bin
-			dd if=/dev/mtdblock10 \
+			dd if=/dev/mtdblock${mtd} \
 				bs=1 skip=20492 count=2104 >> /tmp/ath10k-board.bin
 
 		;;
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-qihoo-c301.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-qihoo-c301.c
index 08a602f..5193d2d 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-qihoo-c301.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-qihoo-c301.c
@@ -14,6 +14,8 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/ath9k_platform.h>
+#include <linux/crc32.h>
+#include <linux/mtd/mtd.h>
 
 #include <asm/mach-ath79/ar71xx_regs.h>
 
@@ -81,6 +83,10 @@ static struct gpio_keys_button qihoo_c301_gpio_keys[] __initdata = {
 
 struct flash_platform_data flash __initdata = {NULL, NULL, 0};
 
+static int qihoo_c301_board = 0;
+
+static u8 wlan24mac[ETH_ALEN];
+
 static void qihoo_c301_get_mac(const char *name, char *mac)
 {
 	u8 *nvram = (u8 *) KSEG1ADDR(QIHOO_C301_NVRAM_ADDR);
@@ -94,9 +100,6 @@ static void qihoo_c301_get_mac(const char *name, char *mac)
 
 static void __init qihoo_c301_setup(void)
 {
-	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-	u8 tmpmac[ETH_ALEN];
-
 	ath79_register_m25p80_multi(&flash);
 
 	ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
@@ -125,8 +128,7 @@ static void __init qihoo_c301_setup(void)
 	ath79_wmac_set_ext_lna_gpio(0, QIHOO_C301_GPIO_EXTERNAL_LNA0);
 	ath79_wmac_set_ext_lna_gpio(1, QIHOO_C301_GPIO_EXTERNAL_LNA1);
 
-	qihoo_c301_get_mac("wlan24mac=", tmpmac);
-	ath79_register_wmac(art + QIHOO_C301_WMAC_CALDATA_OFFSET, tmpmac);
+	qihoo_c301_get_mac("wlan24mac=", wlan24mac);
 
 	ath79_register_pci();
 
@@ -160,7 +162,44 @@ static void __init qihoo_c301_setup(void)
 			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
 			 "USB power");
 	ath79_register_usb();
+
+	qihoo_c301_board = 1;
 }
 
 MIPS_MACHINE(ATH79_MACH_QIHOO_C301, "QIHOO-C301", "Qihoo 360 C301",
 	     qihoo_c301_setup);
+
+static int qihoo_init_wmac(void)
+{
+	struct mtd_info * mtd;
+	size_t nb = 0;
+	u8 *art;
+	int ret;
+
+	if (!qihoo_c301_board)
+		return 0;
+
+	mtd = get_mtd_device_nm("radiocfg");
+	if (IS_ERR(mtd))
+		return PTR_ERR(mtd);
+
+	if (mtd->size != 0x10000)
+		return -1;
+
+	art = kzalloc(0x1000, GFP_KERNEL);
+	if (!art)
+		return -1;
+
+	ret = mtd_read(mtd, QIHOO_C301_WMAC_CALDATA_OFFSET, 0x1000, &nb, art);
+	if (nb != 0x1000)
+	{
+		kfree(art);
+		return ret;
+	}
+
+	ath79_register_wmac(art, wlan24mac);
+
+	return 0;
+}
+
+late_initcall(qihoo_init_wmac);
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index b374391..5ad2c7c 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -290,7 +290,9 @@ zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs
 mynet_n600_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
 mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro,6848k@0x130000(filesystem)
 zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubi)
-qihoo_c301_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata)
+qihoo_c301_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg);spi0.1:15360k(upgrade2),1024k(privatedata)
+qihoo_c301_flash2_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),64k(devdata),64k(devconf),15744k(upgrade1),64k(warm_start),64k(action_image_config),64k(radiocfg);spi0.1:15360k(firmware),1024k(privatedata)
+qihoo_c301_32m_mtdlayout=mtdparts=flash:256k(u-boot),64k(u-boot-env),64k(devdata),64k(devconf),32256k(firmware),64k(radiocfg)
 
 
 define Image/BuildKernel
@@ -1157,7 +1159,9 @@ $(eval $(call SingleProfile,Planex,64kraw,MZKW300NH,mzk-w300nh,MZK-W300NH,ttyS0,
 $(eval $(call SingleProfile,Seama,64k,MYNETN600,mynet-n600,MYNET-N600,ttyS0,115200,$$(mynet_n600_mtdlayout),wrgnd16_wd_db600,1310720,16187392))
 $(eval $(call SingleProfile,Seama,64k,MYNETN750,mynet-n750,MYNET-N750,ttyS0,115200,$$(mynet_n600_mtdlayout),wrgnd13_wd_av,1310720,16187392))
 
-$(eval $(call SingleProfile,Seama,64k,QIHOO360,qihoo-c301,QIHOO-C301,ttyS0,115200,$$(qihoo_c301_mtdlayout),wrgac26_qihoo360_360rg,1310720,16121856))
+$(eval $(call SingleProfile,Seama,64k,QIHOO36016M,qihoo-c301,QIHOO-C301,ttyS0,115200,$$(qihoo_c301_mtdlayout),wrgac26_qihoo360_360rg,1310720,16121856))
+$(eval $(call SingleProfile,Seama,64k,QIHOO360FLASH2,qihoo-c301-flash2,QIHOO-C301,ttyS0,115200,$$(qihoo_c301_flash2_mtdlayout),wrgac26_qihoo360_360rg,1310720,15728640))
+$(eval $(call SingleProfile,Seama,64k,QIHOO36032M,qihoo-c301-32m,QIHOO-C301,ttyS0,115200,$$(qihoo_c301_32m_mtdlayout),wrgac26_qihoo360_360rg,1310720,33030144))
 
 $(eval $(call SingleProfile,Senao,squashfs-only,EAP300V2,eap300v2,EAP300V2,ttyS0,115200,$$(eap300v2_mtdlayout)))
 
@@ -1276,6 +1280,7 @@ $(eval $(call MultiProfile,ARCHERC7, ARCHERC5 ARCHERC7V1 ARCHERC7V2))
 $(eval $(call MultiProfile,EWDORIN, EWDORINAP EWDORINRT EWDORIN16M))
 $(eval $(call MultiProfile,OPENMESH,OM2P OM5P MR600))
 $(eval $(call MultiProfile,TEW652BRP,TEW652BRP_FW TEW652BRP_RECOVERY))
+$(eval $(call MultiProfile,QIHOO360,QIHOO36016M QIHOO360FLASH2 QIHOO36032M))
 $(eval $(call MultiProfile,TLMR11U,TLMR11UV1 TLMR11UV2))
 $(eval $(call MultiProfile,TLMR3040,TLMR3040V1 TLMR3040V2))
 $(eval $(call MultiProfile,TLMR3220,TLMR3220V1 TLMR3220V2))
diff --git a/target/linux/ar71xx/patches-3.10/419-mtd-seama-add-c301-part-name-check.patch b/target/linux/ar71xx/patches-3.10/419-mtd-seama-add-c301-part-name-check.patch
new file mode 100644
index 0000000..16c08ae
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/419-mtd-seama-add-c301-part-name-check.patch
@@ -0,0 +1,14 @@
+--- a/drivers/mtd/mtdsplit_seama.c
++++ b/drivers/mtd/mtdsplit_seama.c
+@@ -38,6 +38,11 @@
+ 	struct mtd_partition *parts;
+ 	int err;
+ 
++	if (!strcmp(master->name, "upgrade1") ||
++		!strcmp(master->name, "upgrade2")) {
++		return -EINVAL;
++	}
++
+ 	hdr_len = sizeof(hdr);
+ 	err = mtd_read(master, 0, hdr_len, &retlen, (void *) &hdr);
+ 	if (err)
diff --git a/target/linux/ar71xx/patches-3.14/419-mtd-seama-add-c301-part-name-check.patch b/target/linux/ar71xx/patches-3.14/419-mtd-seama-add-c301-part-name-check.patch
new file mode 100644
index 0000000..16c08ae
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.14/419-mtd-seama-add-c301-part-name-check.patch
@@ -0,0 +1,14 @@
+--- a/drivers/mtd/mtdsplit_seama.c
++++ b/drivers/mtd/mtdsplit_seama.c
+@@ -38,6 +38,11 @@
+ 	struct mtd_partition *parts;
+ 	int err;
+ 
++	if (!strcmp(master->name, "upgrade1") ||
++		!strcmp(master->name, "upgrade2")) {
++		return -EINVAL;
++	}
++
+ 	hdr_len = sizeof(hdr);
+ 	err = mtd_read(master, 0, hdr_len, &retlen, (void *) &hdr);
+ 	if (err)
-- 
2.1.0.GIT

gistfile1.txt

此 patch 可以让 OpenWrt 直接编译生成三种完美使用的固件 (常规版、第二 Flash 版、32M 双 Flash 利用版)，而且不会被官方 U-Boot 还原。

特别感谢 swigger 提供的用于在内核中复位固件启动次数的代码。

此 patch 基于已成功提交 360 路由初始化支持之后的 trunk 代码

[2014-09-24 改动]
更换内核重置固件启动次数的方式为使用 uboot-envtools，此方法兼容性更好。

准备工作：
1. 准备最新版 OpenWrt trunk 代码，这里不做讲解
2. 若已在使用 trunk 代码，请 git pull 到最新版本，需要注意备份数据

应用补丁：
补丁文件有两个，分别用在不同的地方

0001-complete-c301-support.patch:
复制到 OpenWrt 代码根目录，然后运行
git apply --whitespace=nowarn 0001-complete-c301-support.patch
复制代码
完成后删除 0001-complete-c301-support.patch

0001-add-ieee-802.11ac-support.patch:
复制到 OpenWrt 代码根目录下的 feeds/luci 文件夹下
然后 shell 进入到 feeds/luci
cd feeds/luci
复制代码
然后运行
git apply 0001-add-ieee-802.11ac-support.patch
复制代码
完成后删除 0001-add-ieee-802.11ac-support.patch

注意：需要 make clean 后再编译；切记选中 Utilities -> uboot-envtools 包，否则重置固件启动次数的功能不会生效
另外需要在 Kernel modules -> Wireless Drivers 里选上 kmod-ath9k 和 kmod-ath10k 以保证无线能够正常使用


大功告成：

刷机请使用 sysupgrade 结尾的文件
Uboot刷sysupgrade