gistfile1.txt

bash-4.3# ./dev-environment.sh
tune2fs 1.42.13 (17-May-2015)
Setting maximal mount count to -1
Setting interval between checks to 0 seconds
Creating journal inode: done
which: no distccd in (/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin)
distccd pid 25684 port 9256
WARNING: Image format was not specified for 'toolchain.sqf' and probing guessed raw.
         Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
         Specify the 'raw' format explicitly to remove the restrictions.
WARNING: Image format was not specified for 'hdb.img' and probing guessed raw.
         Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
         Specify the 'raw' format explicitly to remove the restrictions.
warning: TCG doesn't support requested feature: CPUID.01H:EDX.vme [bit 1]
Linux version 4.2.0 (root@default) (gcc version 4.2.1) #1 Fri Jan 8 07:52:44 UTC 2016
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000ffdffff] usable
BIOS-e820: [mem 0x000000000ffe0000-0x000000000fffffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection missing in CPU!
SMBIOS 2.8 present.
e820: last_pfn = 0xffe0 max_arch_pfn = 0x100000
x86/PAT: PAT not supported by CPU.
init_memory_mapping: [mem 0x00000000-0x000fffff]
init_memory_mapping: [mem 0x0f800000-0x0fbfffff]
init_memory_mapping: [mem 0x00100000-0x0f7fffff]
init_memory_mapping: [mem 0x0fc00000-0x0ffdffff]
RAMDISK: [mem 0x0ff54000-0x0ffdffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F62D0 000014 (v00 BOCHS )
ACPI: RSDT 0x000000000FFE16B4 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 0x000000000FFE0BDA 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 0x000000000FFE0040 000B9A (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
ACPI: FACS 0x000000000FFE0000 000040
ACPI: SSDT 0x000000000FFE0C4E 0009B6 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 0x000000000FFE1604 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
ACPI: HPET 0x000000000FFE167C 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
0MB HIGHMEM available.
255MB LOWMEM available.
  mapped low ram: 0 - 0ffe0000
  low ram: 0 - 0ffe0000
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  Normal   [mem 0x0000000001000000-0x000000000ffdffff]
  HighMem  empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x000000000ffdffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000000ffdffff]
ACPI: PM-Timer IO Port: 0x608
e820: [mem 0x10000000-0xfffbffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64894
Kernel command line: panic=1 console=ttyS0 HOST=i686 CPUS=3 DISTCC_HOSTS=10.0.2.2:9256/3
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 254992K/261624K available (2261K kernel code, 192K rwdata, 716K rodata, 216K init, 260K bss, 6632K reserved, 0K cma-reserved, 0K highmem)
virtual kernel memory layout:
    fixmap  : 0xfffe4000 - 0xfffff000   ( 108 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xd07e0000 - 0xff7fe000   ( 752 MB)
    lowmem  : 0xc0000000 - 0xcffe0000   ( 255 MB)
      .init : 0xc131c000 - 0xc1352000   ( 216 kB)
      .data : 0xc123576f - 0xc131a0a0   ( 914 kB)
      .text : 0xc1000000 - 0xc123576f   (2261 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:16 nr_irqs:16 16
Console: colour VGA+ 80x25
console [ttyS0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 2998.400 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5996.80 BogoMIPS (lpj=11993600)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
ACPI: setting ELCR to 0200 (from 0c00)
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
CPU: Intel Pentium III (Katmai) (fam: 06, model: 07, stepping: 03)
Performance Events: Broken PMU hardware detected, using software events only.
Failed to access perfctr msr (MSR c2 is 0)
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
NET: Registered protocol family 16
clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
ACPI: bus type PCI registered
PCI: PCI BIOS revision 2.10 entry at 0xfd40f, last bus=0
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [Segments]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x10000000-0xfebfffff window]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
ACPI: Enabled 16 GPEs in block 00 to 0F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
clocksource: Switched to clocksource pit
pnp: PnP ACPI init
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
clocksource: Switched to clocksource acpi_pm
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
Unpacking initramfs...
Freeing initrd memory: 560K (cff54000 - cffe0000)
futex hash table entries: 256 (order: -1, 3072 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
9p: Installing v9fs 9p2000 file system support
io scheduler noop registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
loop: module loaded
Uniform Multi-Platform E-IDE driver
piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
piix 0000:00:01.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xc040-0xc047
    ide1: BM-DMA at 0xc048-0xc04f
hda: QEMU HARDDISK, ATA DISK drive
hdb: QEMU HARDDISK, ATA DISK drive
hda: MWDMA2 mode selected
hdb: MWDMA2 mode selected
tsc: Refined TSC clocksource calibration: 2998.402 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b385fbb0a9, max_idle_ns: 440795275490 ns
hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
clocksource: Switched to clocksource tsc
hdc: MWDMA2 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
hda: max request size: 1024KiB
hda: 55872 sectors (28 MB) w/256KiB Cache, CHS=55/255/63
hda: cache flushes supported
hdb: max request size: 1024KiB
hdb: 4194304 sectors (2147 MB) w/256KiB Cache, CHS=4161/255/63
hdb: cache flushes supported
ide-cd driver 5.00
ide-cd: hdc: ATAPI 4X DVD-ROM drive, 512kB Cache
cdrom: Uniform CD-ROM driver Revision: 3.20
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
NET: Registered protocol family 17
9pnet: Installing 9P2000 support
hctosys: unable to open rtc device (rtc0)
Freeing unused kernel memory: 216K (c131c000 - c1352000)
Aboriginal Linux 1.4.2
EXT4-fs (hdb): mounting ext3 file system using the ext4 subsystem
EXT4-fs (hdb): mounted filesystem with ordered data mode. Opts: (null)
mount: '/dev/hdc'->'/mnt': No medium found
Distcc acceleration enabled.
Type exit when done.
(i686:3) /home $ ls
lost+found
(i686:3) /home $ wget https://static.rust-lang.org/dist/rust-nightly-i686-unknow
n-linux-gnu.tar.gz
Connecting to static.rust-lang.org (54.192.82.209:443)
wget: server returned error: HTTP/1.1 400 Bad Request
(i686:3) /home $ wget http://static.rust-lang.org/dist/rust-nightly-i686-unknown
-linux-gnu.tar.gz
Connecting to static.rust-lang.org (54.192.82.59:80)
rust-nightly-i686-un 100% |*******************************|   104M  0:00:00 ETA
(i686:3) /home $ tar xf rust-nightly-i686-unknown-linux-gnu.tar.gz
main-loop: WARNING: I/O thread spun for 1000 iterations
(i686:3) /home $ cd
lost+found/                           rust-nightly-i686-unknown-linux-gnu/
(i686:3) /home $ cd rust-nightly-i686-unknown-linux-gnu/
(i686:3) /home/rust-nightly-i686-unknown-linux-gnu $ ./install.sh
./install.sh: line 930: CFG_COMPONENTS: unbound variable